PROVN OF DRAINAGE SYSTEM WITH CONSTRUCTION OF TOILET BLOCK AT MCEME UNDER GE MCEME SECUNDERABAD

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard dense soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M &L for PCC 1:4:8 type D2 using 40mm graded aggregate in foundation /mass concrete for footing and steps complete all as specified and directed.

M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for formwork to fair finished surfaces of timber form work to sides and soffits of floor or roof beam , lintels including support , overhangs etc also splays between floors and beams etc complete all as specified and directed.

M&L for RCC type M-25 Design mix ( 20mm graded aggregate) in beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Rendering 15 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:6, with water proofing compound finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:4 mixing with water proofing compound as per manufacturer instruction finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound

M & L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion (weather proof) paint having VOC less than 100 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete, all as specified and as directed.

M&L for Moorum/approved earth filling in floors or pavings laid in layers n.exc 15 cm thick spread levelled and rammed including watering

M&L Hardcore guage exc 63 mm n.exc. 100 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled / rammed to a true surface.brocken stone or boulders

M&L for cement concrete 75mm thick Type D-2 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L cement concrete type B1, 1:2:4 (20mm graded Aggregate) 40 mm thick in floor complete all as specified and directed.

M&L screed bed or bedding layer of mortar 15mm thick in cm 1:6 for laying floor finishes all as specified and as directed.

M&L for vetrified ceramic coloured tiles 9 to 10 mm thick area of each tile exc 0.36 and n. exc 1.2sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement all as specified and directed.

M&L for vetrified ceramic coloured tiles 9 to 10 mm thick area of each tile exc 0.36 sqm but not exc 1.2Sqm in Skirting/dado over 10mm thick backing coat complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in floor / plinth protection including finished even and smooth without using extra cement.

S&F horizontal level 15mm thick mineral fibre sound absorbing microlook sheet of size 600mm x600mm panels seamless false ceiling including seamless celing grid system with hot dipped galvanised steel sections size 38mm x15mm exposed surface with precoated capping , main tee of size 24x32 mm at evrery1200 mm c/c and cross tee of size 24 x27 mm ( 1200mm & 600 mm long ) at every 600 mm c/c and wall angle of size 19x19 mm fixed to perimeter wall, as per manufacturer's instructions , grid to be suspended at every 1200mm c/c in both directions by using 6mm dia pre-straightened GI wire at every 1200mm c/c internal at the main tee, complete all as specified and directed. (Make - Armstrong, Everest, Gyproc)

S&F in Roof trusses (framed) Fe-410W(Gde E-250) quality-A, trussed, purlins, crane gantries, Posts, rails and fastenings and heavy bracket framing (beam tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified

S/F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified

S&F 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified

S&F 140mm long floor door stopper of aluminum alloy body and tongue anodised with hard drawn steel spring fixed in floor or bottom of door complete all as specified

S&F Aluminium body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed

Supply and install Cubicle toilets with standard dimension of 1550mm Depth x 1800mm Height x 1000mm Width , which includes 600mm door size width). made of heat, bacteria, water, chemical, scratch, impact anti bacterial resistant 12mm thick solid Compact laminate boards (HDPE) are made of Phenolic resigns under high pressure and temperature. All pilasters are supported by 150mm Adjustable Legs on the Bottom. U channels are used to fix the pannels on walls. Top Rail is provided on the top of cubicle giving it a neat suttle look with extra strength. Finish of the compact laminated boards includs doors, pilasters and intermedate panel finished with approved texture/shade as per the detail drawings & as per IS 2046 (Indian Standard) and as per fire retardant BS 476/97 standard. This also include providing and fixing in position necessary hardware made out of Stainless steel (Grade 304) as per manufacturer’s specifications and architectural instruciton includes Adjutable legs, Door Knobs, gravity hinges, Thumb turn lockset indicator, Coat hook, Auto return hinges and also includes aluminium powder coated U-Channels, Top Rail, Door stopper Channel, Noise reduction tap, and Screws & wall Plugs. All screw shall be SS 304 grade with satin finish. The base of the stainless steel shoe box will be anchored to the floor with clearance height upto 130mm.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F PVC ( SWR) soil waste pipe in any length Single socketed with rubber ring jointed laid in trenches or in floors/wall 110mm dia bore of pipe ISI marked.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors/wall, including necessary brackets all as specified and directed .

S & F PVC (SWR) gully trap 125 / 110 mm including setting and jointing with solvent cement and removing old trap and making good all as directed by Engr in Charge

S & F PVC (SWR) floor trap, plain with Chromium plated grating including jointing with solvent cement with 75 mm outlet dia all as directed by Engr-in-charge.

S&F PVC (SWR) bends any radious 75mm bore all as specified.

S&F PVC (SWR) bends any radious 110 mm bore all as specified.

S&F viterous china Counter top wash basin, white flat back size 410mm x 410 mm including brackets with waste pipe including cutting holes in granite slab and pinning in ends of brackets or erecting stand with grating fixing on granite top making good, fancy type complete all as specified and directed (Make -Jaguar, Hindware, Parryware, Cera)

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

S&F fancy type swan neck Pillar taps 15mm dia cast copper alloy with inner capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm dia pipe all as specified (Make -Jaguar, Hindware, Parryware,Cera)

S&F fancy type stop valve cast copper alloy 15mm bore chromium plated with long shank and cup (concealed type) screwed for both ends for iron pipe or PVC pipes and fixed all as specified and as directed. (Make -Jaguar, Hindware, Parryware, Cera)

S&F 15mm dia two way bib taps with two knobs, chromium plated fancy type, cast copper alloy with fancy type handle , screwed down , screwed for iron pipe or for brass ferrule with wall flange, complete all as specified and as directed (Make -Jaguar, Hindware, Parryware, Cera)

S&F 15 mm dia 600 mm long PVC water connection with PTMT nuts and washers all as specified

S & F single piece Integrated type (Two in one) Vitreous china wash down water closet pan (pedestal pattern) size (645 x 365 x 705mm) including 'P' or 'S' Trap with necessary fixing arrangement including plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed. (Make -Jaguar, Hindware, Parryware, Cera)

S & F Health faucet with hose & hook chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.(Make -Jaguar, Hindware, Parryware, Cera)

S&F Vitreous China urinal half stall type combo set size 380 x 405 x 590mm white (minimum) with Integrated assembly kit and outlet with grating and union for discharge pipe including urinal spreader complete all as specified and as directed by Engineer-in-Charge. (Make -Jaguar, Hindware, Paryware, Cera)

S&F 12mm thick solid Compacted laminate boards (HDPE) as in urinal partition Size : 900 H X 450 W on top X 350 mm on bottom. Accessories: Stainless Steel Urinal Clamps all as specified and directed.

S&F Bottle trap of PTMT having minimum water seal of 25mm for bore dia discharge pipe 40MM .(Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified and as directed.

S&F 110 mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F CP brass tubular towel rail 600mm long 20mm dia 'D' type complete all as specified and as directed by Engineer-in-Charge.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed.

Grating 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

M&L Rotational moulded polyethylene water storage tanks 1000 Ltr (cylinderical vertical with closed top) including dismantling water tanks and also necessary float ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed .(Minimum weight 20mm - 210 gms) hoisted and fixed in position , complete all as specified and directed by Engineer-in-Charge.

Cutting chases ,pinning in making good to facing where required of stone walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth complete all as specified and as directed.

S&F Mirror assembly of size 2.5M x 0.75M with all fitting fixed in wall for counter top wash hand basins complete all as specified and as directed.

Cutting into existing manhole for connecting new drain, making good pipe and rending cutting out existing benching for and forming branch channel (1/2 round or 3/4 sec ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 160mm dia.

M&L for 150 mm dia bore reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars etc complete

M & L for cement concrete 1:4:8 type D2 to bed to drain pipe including packing under and hunching against sides of pipes after they are laid and tested for 150 mm dia pipe

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed.

M & L 75 mm thick PCC type D2, 1:4:8 (40mm graded aggregate) finished even and smooth with out using extra cement

M&L for 20 mm thick screed bed or bedding layer of mortar in cement 1:6 for laying floor finishes

M&L chequered cement concrete tiles 30cm x30 cm x25mm thick , set jointed and pointed in neat cement slurry with grey cement and pigments

Excavation over areas, not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over area, exceeding 1.5m but not exceeding 3m deep and getting out in soft/loose soil complete all as specified and directed.

M&L PCC in Cement concrete foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including quoins, arches, pillars etc., and precast concrete articles and disposing off the rubbish materials outside MD land complete all as specified and directed.

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

All as per item No 73.00 above but execept stone complete all as specified and directed.

M&L Pre-cast cement concrete block masonry type 1:3:6 (20mm graded aggregate with solid blocks, exc. 10cm in width and setting in mortar 1:6 complete all as specified and directed.

Cement concrete 1:2:4 Type B1 (20mm graded aggregate) in benching, coping and the like including weathering slightly rounded or chamfered angles as directed including form work and finishig all exposed surfaces including necessary form etc. complete all as spd.

M&L cement type C2 1:3:6, using 40mm aggregate in surface channel and drains etc, complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished the surfaces even and smooth using extra cement all as specified and directed.

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth

M&L to flush pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses or concrete block walling all as specified and directed.

Extra for forming fair finished drain or drain channel 1.2m inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as spd.

Material and labour for Concealed point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc complete all as specified for the following:- (a) One light / fan point controlled by one switch.

(b) One three pin switch socket 6 Amps outlet on independent board.

(c) One three pin switch socket 6 Amps outlet on same board.

Supply and fix Modular switch 1 way 6A , 1-module all as specified and directed.

Supply and fix Modular switch 1 way 16A with indicator, 1-module all as specified and directed.(Including Geyser Point)

Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module all as specified and as directed

Supply and fix Modular socket, shuttered type, 6/16A - combined 2-module all as specified and as directed by Engineer in Charge.

S & F 3 pin, 6 A, 250 V ceiling rose conforming to IS 371: 1999 and having terminal capacity 3 X 1.5 mm² with IK 04 and IP 20 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F in MCB double door DB SPN 4 way with 200 Amps busbar including removing the existing unserviceablle one and making good the disturbed surface as directed by the engineer-in-charge.

Supply and fix in MCB SPN 40 amps 240 volts for fixing on MCB DB all as specified and directed by engineer-in-charge

S & F MCB ('B' curve) 6- 32 A, 230 V, 50 Hz, SP for conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. with the following rating complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

Supply and laying of fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq.mm 2 core nominal cross section in service connections include suitable GI Pipe complete all as specified and directed

S & F 20 W (Min 120 Lumen/Watt) surface / wall mounted LED batten having Aluminum housing diffuser, luminous efficacy of minimum 100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed

All as per Item no. 94.00 above but 10 W complete all as specified and directed

S & F of LED Luminarie 600mmx600mm 35/36 watts, 220 volts AC Surface mounting light fixture type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver 3 core flexible copper conductor cases of suitable size complete with lumianrie system efficacy >100 lm/w with IP & surge protection of 10 kV, power factor >0.95 complete with all accessories all as specified and directed by Engg-in-Charge . Make PHILIPS/HAVELLS/WIPRO.

S & F 35 W security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 110 lumen/Watt, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed. NOTE:The above rate including security light fittings and GI pipe bracket with all fixing accssories.

Supply and fixing of Exhaust fan, sturdy Engineering plastic AC single phase, 230 V of size 250mm sweep with , copper winding , and frame and louvers all as specified and directed

S&F automatic single blower hand dryer , power rating 1500 W , drying time 20 s, body material SS 304, Air speed 90 m/s, sensor type infrared , wall mount, 220 V all as specified and directed

Please Enable Macros to View BoQ information