TCMC - Providing Landscaping, Greeneries and Foot Path at Ponds Flyover in Zone II

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as direct-ed by the departmental officers.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling crushed stone sand ( M-sand ) in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means

supplying and fixing of EPDM flooring 36mm thickness (Q)

supplying and fixing of pu flooring 36mm thickness (Q)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Brick work 1:5 in following Cement Mortar using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.

Supplying and fixing in position SFRC Manhole covers (light or heavy duty) of 60 X 60cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete. (PWD SOR P.NO :123)

Plastering with Cement Mortar 1:5 (One cement and Five Crushed stone sand ), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Three coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Supplying and laying of Interlocking Paver Block Stone 63mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Paving the floor with best approved quality fine polished Granite Stone Slabs of following size and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Granite Nosing for Steps/Platform of full round with smooth finishing including cost of labour, machinery etc., complete. (PWD SOR P.NO :75)

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Providing and applying primer and two coats of 100% Acrylic breathable, Anti-Carbonation, waterproof, heatinsulating, decorative exterior coating of approved shade after applying a primer coat of same material and apply two coats of mix 1 ltr with 400 - 500 ml water, it shall be applied as per manufacture specification. Acrylic paint shall be spray / brush / roller applied and shall conform to the following properties. Carbon dioxide diffusion equivalent air layer thickness (DIN EN 1062-6) > 100m; Carbon dioxide diffusion resistance coefficient (DIN EN 1062-6) > 105; Elongation of cured film shall be as per ASTMD 2370/98 > 400%; Chloride iron diffusion (ASTM C 1202) = Zero penetration; Adhesion to concrete (ASTM D 4541) > 2 N/mm2; Solar Reflective Index (ASTM E 1980 - 11, EN 673; 2011, EN 410: 2011) > 104. The inter-coat gap to be 24 hours. The rate shall include complete treatment mentioned above and should not be less than DFT 200- 225 microns for primer and two coats as per relevant MoRT&H specification (HW-W0067)

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supply and Fixing Chain Link - 2 x 2 using 10 Gauge Galvanised Iron Wire

Earth work excavation for foundation in all kinds soils in varying depths (Digging of new trenches for hedge / edge planting, digging and removal of excavated earth from site complete)

Supply and stacking of pit sand / earth filling sand at site to the departmental gauge for pre measurements obtained from sand deposits and should clean without solid particles. HC-W0031 VOL-II SOR 24-25 PG.NO 270

Supply of Vermicompost in powder form, devoid of impurities and other materials, nutrient dense and which supports plant growth including cost of transportation

Planting of Ficus panda ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. HC-W0069 VOL-II SOR 24-25 PG.NO :276

"Planting of Hibiscus hawai foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in- charge.".HC-W0075 VOL-II SOR 24-25 PG.NO :277

Supplying and Planting of Roystonea regia (Royal palms) palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.. HC-W0170 VOL-II SOR 24-25 PG.NO :293

"Supplying and Planting of Cassia fistula tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge."HC-W0215 VOL-II SOR 24-25 PG.NO :301

Planting of Duranta new gold Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of exca. HC-W0062 VOL-II SOR 24-25 PG.NO :275

Planting of Ficus black ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. W0068 VOL-II SOR 24-25 PG.NO :276

"Supplying and Planting of Plumeria tree sapling of height 240–300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge"Each 1154.00HC-W0236 PD-1824 "Supplying and Planting of Poovarasu tre..--W0235 VOL-II SOR 24-25 PG.NO :305

Supplying and Planting of Golden Bamboo tree sapling of height 300 - 360 cm in polythene bag of size 15x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge..W0255 VOL-II SOR 24-25 PG.NO :309

Supply and turffing of Korean grass / mexican grass for 45 Sq Ft including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling,refilling of excavated earth etc as directed by the site in- charge.

Supply and delivery of SWING TYPE SS MADE 100 Lit Capacity Mobile Garbage Bins shall conform to following specifications:-G• The material shall be heat and chemical resistant and shall be UV stabilized.The manufacturing process shall be Injection molding only as specified by EN 840-1 standard.The bins shall have suitable lid of HDPE Injection Molded at the top which shall be hinged on one side and open easily by gravity while unloading in refuse compactors.The bins shall have Nominal volume of 240 Ltrs.The bins shall have Two Solid rubber wheels of 200 mm Dia. (+-5 mm). Both these wheels shall be mounted on axle, which shall be corrosion resistant.The bins shall be provided with single piece pulling handle.The bins shall have deep and strong combs as per EN Standards. These combs shall ensure optimum accommodation on the lifting devices i.e. Refuse Compactors with Universal Bin Lifting mechanism.The useful load shall be min. 110 Kgs. As per EN standard.The color of the bins shall be Green/Blue/Grey/Yellow/Red and aesthetically pleasant in nature. (Q)

"Supplying, erecting and Fixing precast reinforcement bench with back rest. Bench shall consist of 2 nos. L shaped bases support in natural cement color of thickness 100mm, back height 1000mm, front height 450mm, base width 620mm and 5Nos Reinforced Concrete planks in red color and size of 1500x100x50mm and 1no. reinforced concrete plank of 150x200x50mm: manufactured by using M-30 grade concrete & reinforced suitably: all parts to be joined with galvanized nuts and bolts of suitable size."sor : pg: no: 317

Providing & Fixing in position CNC Cut Signage as per design and Architect's approval consisting of CNC cut metal sheet of 8mm thickness, 3mm thick acrylic sheet to be used for advertisement panel, the framework is made up of MS box section , 12mm thick insert plate & M20 grade Precast RCC block to be used for foundation. Cost of the Item is including Base Work- Earthwork, GSB, WMM, Labour and transportation of material to site,& fixing as per direction of site in charge, complete.

Supply and Fixing of Street Kiosk made up of Hydraulic Interior & Exterior Architectures, Sign Boards and many other in partitions to the clients at very competitive and affordable prices. Our products comprise of Exhibition Stalls, Interior & Exterior Architectures made of metal, ACP, wood and fiber glass. All the products have long functional life, require low maintenance, high quality, high performance, shiny appearance, superior luster, smooth edges, attractive colors & designs and perfect finish. We also offer custom designed Kiosk, Stalls & Architecture on the demand of the client.

Investigation charges for Geophysical survery finding of yeild to the point drilling of Borewell for all etc., complete

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit. (TWAD SOR P.NO :198) Drilling of 140/150 mm pilot bore Upto 60 m Depth ending below ground level

Supply and delivery of clear water vertical wet type submersible pump suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS 9283 /1995 and as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % (50 Lpm X 60 m )(TWAD SOR P.NO : 102)

Labour Charges for the erection of Submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, and erection of panel board consisting of TPICN swtiches starter voltmetre, Ammeter, three point (indicating) lamps capacitor single phasing preventor and laying and jointing the cable and twin earthing for etc., Complete and testing the pumpset and trail run for 10 days. (TWAD SOR P.NO : 20)

Supply and Delivery of 150mmdia PVC casing Pipes including cost and conveyance of materials and labour charges etc. complete as per standard. Specifications (TWAD SOR P.NO : 20) 150 mm dia pvc casing pipe (twad sor p.no :6)

Supply and delivery of 3 phase panel board D.O.L delta with two level guard and auto start to suitable for 5 HP submersible pumpset etc. complete (TWD SOR P.NO :6)

Supplying delivery of G.I and PVC Pipes and specials of approved quality and best varity of B Class pipe including cost convayence of materials to work site etc., complete.(TWD SOR P.NO :119)

50mm Dia G.I Pipe (PWD SOR P.NO 50)

50mm Dia G.I Coupling (PWD SOR P.NO 52)

50mm Dia G.I Elbow (PWD SOR P.NO 51)

50mm Dia G.I Union (PWD SOR P.NO 51)

50mm dia Gun Metal Gate Valve (PWD SOR P.NO 53)

Borewell M.S.Clamp set (TWAD SOR P.NO :44)

Borewell 8 Module Cover Plate (twad sor p.no : 182)

40mm Dia PVC pipe (PWD SOR P.NO 104)

40 mm Dia PVC Coupling (PWD SOR P.NO 105)

40 mm Dia PVC Elbow (PWD SOR P.NO 105)

40 mm Dia PVC Bend (PWD SOR P.NO 105)

40 mm Dia PVC Reducer 50 x 40 mm (PWD SOR P.NO 106)

supply and delivery of PVC inclused and sheated 3 core 4 sq.mm. PVC Armoured UG Cable (TWAD sor p.no :133)

Supply and fixing of 10W LED Solar light fitting (Philips/Havells) complete with T.W round blocks on wall or ceiling with flu tube with PVC unsheather copper leads from terminals to the filling (Q)

Supply and fixing of 11W LED Outdoor Bollard light (Philips/Havells) complete with T.W round blocks of 6" dia and height 0.9m. PWD SOR P.NO :250

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD-70)

Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7 / 20 GI bearer wire for service connection mains (SD-67)

SUPPLY AND FIXING OF LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) HIGHER END80W LED Focus Light Fitting with LED SOR ,PG:NO:169

Supplying and fixing 120W LED Street Light Fitting with LED sor;pg;no:169

10-15W/m Warm White LED Strip Supply of Mono colour Flexible Flat shaped LED strip suitable for indirect lighting effects for outdoor Facade. Strip should be enabled with low power LEDs, High transparency silicone diffuser, anti-UV. Luminaire luminous range of minimum 40-50lm/m(white). Beam angles: 120⁰. Power consumption should be 10W-15W at steady state full intensity for 1m. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitable separate non-integral power supply unit. Ingress Protection should be IP 66, impact protection of IK05. Housing should be made of Silicon. Temparature range of -40deg. C to +55 deg. C; LEDs of NICHIA / CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/Epistar or any reputed make shall be used for the light fittings. Luminaire shall be BIS approved. (Q)

Supply and Fixing of 9W Spike Light As per the Design and Dimensions as Shown In Detailed Drawings with its necessary fittings etc., Complete as per the standard specification (Q)

Vertical TPN Distribution Boards (with MCCB Incomer); Double Door; IP43, as per IS 8623 III; Impact resistance IK09; Frame MCCB Incomer & Single Phase/Three Phase MCBs as Outgoing (for power loads exceeding 100A) 16 Way, MCCB + 48 Modules sor;pg:no: 203

Supply and fixing of 65mmdia GIpipe (Class 'B') 4metre length with 300mmx300mmx6mm MS base plate duly welded at the bottom with concreting and construction of masonary pedestal with MS box of 30cmx20cmx10cm with angle iron frame work with door and lock and key arrangements with supply and fixing of 60W LED street light fitting withbulbandwith supplyand fixingof 1No. 16A fuseunit (500V) and5ASP switch inside theMSboxwithPVC unsheathed FRLS leads and painting of suitable colour

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4way connector on suitable hylem sheet and supply and fixing of 30W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire and making good of the concealed position.

Supply fixing and errection of CCTV Camara including cost and Conveyance of all materials to site etc complete as per Specification (5units / park)

4MP IP Bullet / Dome Camera. (PWD SoR M-2806)

Network Video Recorder 16 Channel - 2 SATA (2 Nos. Hard Disk) (PWD SoR M-2197)

Hard disc for NVR 4 TB (PWD SoR M-2221)

Rack With Accesssories -12U M-2228

Rack With Accesssories -4U M-2225

Armoured LAN & CCTV Cable (CAT-6) (PWD SOR Unicode M-2184)

29" Led TV for display (Q) (LMR)

Providing and fixing in position Precast Cylindrical Bollard of 200mm dia and of 1150mm height as per design, finish as per Architect's approval. The bollard is provided with Required reinforcements. The bollard is manufactured with cement concrete of M-20 grade by vibro compaction method using FRP/steel moulds, so as to achieve shuttering finish.The cost of item is complete including moulding charges, transporation, loading/unloading charges and labour complete. (Q)

Supply and fixing of ARCH SEA SAW Sea saw made of G.I.sheets with 2 Stainless Steel Pipes Boards to play 4 Children simultaneously. Seats made of fiber reinforced plastic SI:NO: 40 CPE-144

Supply and fixing of Merry go round – 6 Seater (FRP) Height :3” GI Pipe, 2.5mm thick, b class Seat size:15” X 14”, paint: pu coating SI:NO: 25 CPE-129

Supply and fixing of Swing 2 seater Height of 7ft 0” above the ground level and width of 10ft 0”. Legs made of 40mm Stainless Steel pipes and 31 Cross Bars made of 50mm SS pipes Seats fiber CPE-135 Each 64253.00 reinforced plastic seats suspended with 6mm thick in coated chain etc SI:NO: 31 CPE-135

Supply and fixing of Roller Slide 8ft: Measurement] Height:5ft Width: 2ft Sliding Chute:10ft Roller thickness:3mm PVC Roller with½ inch galvanished pipes. No. of Rollers.46 with multicolours. Painting with PU coating [Required area] Product area: 21/2’ft * 14’ft Play area:6’ft * 18’ft SI:NO: 06 CPE-110