Certain misc repair to drain, fencing, gates, pathway, boundary wall etc at New and old Mil Stn Kapurthala under GE Kapurthala

Amount

Demolition of brick work built in cement mortar incl quoins ,arches and pillars etc. complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) n exc 15 cm thick complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any descrip-tion and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in reinforced of any descrip-tion and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick wall including racking out joints, hacking for keys scrubbing down with water complete all as specified and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

All as per item No 6 here in before but except bricks complete all as specified and directed by Engr-in-Charge (old bricks botained after dismantling of bricks shall be re-used).

M & L brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

All as per item No 8 here in before but except bricks complete all as specified and directed by Engr-in-Charge (old bricks botained after dismantling of bricks shall be re-used).

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L Cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed by Engr-in-Charge.

M & L cement concrete (1:2:4) B-1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, benching, coping, bed blocks etc including use of necessary form work complete all as specified and directed by Engr-in-Charge.

M&L for providing precast cement concrete Type B0 1:2:4 set in C:M 1:4 louvres and jallies, 40mm thick measured solid, including all mouldings but excluding frame (Pre cast frame shall be measured separately) complete all as specified and directed by Engr-in-Charge.

M & L for pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in drain cover slabs, of any thickness, size or shape including necessary from work, finished concrete surfaces fair and even in cement mortar set in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M & L TMT bars10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engr-in-Charge.

All as per Srl item No.15 here in before but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L Precast cement concrete block masonary ( factory made )with solid block (size 30x20x15 cm) as in edging ,type B1 1:2:4 (20 mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M & L machine pressed precast conc. interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

M & L for chequered coloured cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry and pigments as in floors over 15mm thick screed bed in cm mortar 1: 6 complete all as specified and directed by Engr-in-Charge.

M & L rendering 15mm thick on fair faces or other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M & L Preparation of plastered and un plastered surface of wall by applying two coat of exterior emulsion paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

Keyed pointing to brick work as in CM (1:4) complete all as specified and directed by Engr-in-Charge.

M & L Preparation of old Plastered or Unplastered surface of wall shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of exterior emulsion paint complete all as specified and directed by Engr-in-Charge.

Taking down old u/s steel gates any size any shape any description complete all as specified and directed by Engr-in-Charge.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to GDE Fe410-O or Fe-310-O complete all as specified and directed by Engr-in-Charge.

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanized steel staples supplied and fixed complete to wood or steel members not exc 4 kg complete all as specified and directed by Engr-in-Charge.

M & L 25 mm thick Cement Conrete1:2:4 type B–1 using 20mm graded stone aggregates flooring finished even and smooth complete all as specified and directed by Engr-in-Charge.

M & L 50 mm thick Cement Conrete1:2:4 type B–1 using 20mm graded stone aggregates flooring finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for glazed ceramic coloured tiles of size 450X 300X 8mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cm 1:4 complete all as specified and directed by Engr-in-Charge.

M & L for non skid ceramic coloured tiles with matt finish, 6 to 8 mm thicksquare or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade as in floors over 15mm thick screed bed in cm 1:6 complete all as specified and directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in conc or brick masonary and making good disturbed groundcomplete all as specified and directed by Engr-in-Charge.

Dismantling fencing wire mesh, any type, any size complete all as specified and directed by Engr-in-Charge.

S & F mild steel work as in posts, struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290. Gde E-165 complete all as specified and directed by Engr-in-Charge.

S & F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed by Engr-in-Charge. (Each line to be measured separately)

Restraining resecuring including making good galvanised steel barbed wire any dia barbed with any dia barbs at any spacing and any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed by Engr-in-Charge. (Each line to be measured separately)

Supply only Chain link MS galvanised fencing, any size or type complete complete all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engr-in-Charge.

M&L for steel Round bars Fe-410 -W (Gde E-250) 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

S & F MS screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal / square nuts exc 10 cm and not exc 15mm , dia of neck 5 to 10mm complete all as specified and directed by Engr-in-Charge.

M & L for applying two coats of synthetic enamel paint on preparation of newly steel surfaces over a coat of Zinc chromate primer any description over 10 cm width of girth not otherwise described complete all as specified and directed by Engr-in-Charge.

M & L for applying two coats of synthetic enamel paint on preparation of old brick/Kerb stone/ concrete surfaces and repair demaged portion by any means like plastering and concreting any description over 10 cm width or girth not otherwise described complete all as specified and directed by Engr-in-Charge. Note : cost of repairing of demaged portion is included in this item.

M&L for two coats of synthetic enamel paint on new surfaces of road side kerb stone any type , any description over 10 cm width or girth not otherwise described incl. preparation and priming coat of new surfaces of kerb stone complete all as specified and directed by Engr-in-Charge.

Desilting of existing drain removing of mud, soil, etc for a depth of 1m and deposit at 500m away from the site complete all as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out , returning filling in layers not exceeding 25cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre complete all as specified and directed by Engr-in-Charge.

Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Supply and fixing informatory sign/symbol board all as per drw no . CEJZ/TD-1049/08 Sheet No. 1/1 complete all as specified and directed by Engr-in-Charge (Drg shall be provided by Engr-in-Charge on site).

SANDEEP JHANJI CONSTRUCTIONS

Motorway Constructions