Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.2 LAccepted-AOC R O Y K PURA QAZIGUND ANANTNAG 192221 J K | ANANTNAG | JAMMU AND KASHMIR | 192221 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹48.2 L+₹80,575.75 (1.70%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹51.1 L+₹3.7 L (7.79%)Rejected-Finance PO PS JANG DISTRICT TAWANG ARUNACHAL PRADESH 790104 | JANG | TAWANG | ARUNACHAL PRADESH | 790104 | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹53.5 L+₹6.1 L (12.9%)Rejected-Finance | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹54.5 L+₹7.1 L (15.0%)Rejected-Finance | L5 | Rejected-Finance Not lowest |
Tender Value
₹43.1 L
EMD Value
₹86,300
Closing Date
11 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 860 EWS
GE 860 EWS
SPL REPAIR TO BLDG NO T-126 OF HQ 3 ARTY BDE, PROVN OF TOILET BLOCK FOR PATIENT WAITING HALL FOR CMIR AND PROVN OF GUARD ROOM ALONGWIH TOILET FACILITIES AT HQ 3 ARTY BDE AT SHESHARTHNG UNDER GE 860 EWS
2023_MES_615008_1
8170/2023-24
Open Tender
Civil Works
Item Rate
270 days
Karu and Shesharthang
Refer NIT
9 documents required · 9 mandatory
₹500
GE 860 EWS
₹86,300
Yes
30 Sept 2023
22 Aug 2023
13 Sept 2023
22 Aug 2023
11 Sept 2023
6 Sept 2023
Amount
Surface dressing n.exc. 15 cm deep in soft/loose soil complete all as specified and as directed.
Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth for foundation and getting out in hard/dense soil complete all as specified and as directed.
M&L for Plain cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded aggregate as in Chajjas complete all as specified and as directed.
M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed.
Use and waste of Steel sheet form work to sides of concrete foundations, footings, bases of columns raft and beams sides and soffits(if any) of foundations and plinth,beams and similar work,vertical or to batter,for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of steel sheet form work to sides of pillars, posts, struts, piers, columns and stanchions, for square, rectangular or poygonal, rough finished surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc rough finished surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ® rough finished surfaces of concrete complete all as specified and as directed.
M &L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.
M&L mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.
M & L Precast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as Specified.
S&F for 2nd Class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified ans as directed.
M&L for 35mm 2nd class hard wood plain framed factory made, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commerical ply or 12mm veneered particle board with commerical veneering on both faces. The size of rail and stile as per IS:1003 complete all as specified ans as directed.
M&L for Glazed and skelton Windows, ventilators shutters 30 mm thick 2nd class soft wood, open rebated and prepared to receive glass, guage, etc, divided in to square with plain, chamfered or rounded mitred and rebated sash bars, any numbers, size of members of shutters as specified in SSR Part I Section 8 clause 8.20 (b) as in windows complete all as specified and as directed.
S&F 75mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified.
S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified.
S&F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.
S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.
S&F 100mm Aluminium handles, cast type, anodised complete all as specified.
S&F 150mm Aluminium handles, cast type, anodised complete all as specified.
S&F 300 mm aluminium alloy anodised sliding door bolt with hasp, staple complete all as specified and as directed..
S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
M&L 4 mm thick glass panes ordinary quality and glazing with oil putty in square n .exc 0.50 Sqm in each Pane etc complete all as specified and as directed.
M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface in broken stone or boulders complete all as specified and directed.
M&L for 100 mm thick Cement Concrete type D-2, 1:4:8 (40 mm graded aggregate) as in Sub base to floors complete all as specified and directed.
M&L for joint free non skid colour ceramic tiles 7 to 8mm thick (square/rectangular), polished, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in net slurry and pointed in white or coloured cement to match existing shade over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick bacing finished even and rough to receive tiles in cement mortar 1:6 complete all as specified and as directed.
Rendering 15mm thick in cement mortar 1:4 using water proofing compound as per manufacturer's instruction in two layers, finished even and smooth surface without using extra cement - External Plaster (WPC measured and paid separately) complete all as specified and directed.
Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and to be finished even and smooth without using extra cement - Internal Plaster complete all as specified and directed.
Rendering 5mm thick in cement mortar 1:3 finished even and smooth without using extra cement on ceilings complete all as specified and as directed.
Supply only liquid water proofing compound for external plaster complete all as specified and directed.
M&L for preparation of new plastered surfaces and apply two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surface of wall and apply two coats of OBD over a coat of primer on newly plastered surface complete all as specified and directed.
M&L for preparation new plastered surface of ceiling and applying three coat of white wash complete all as specified and directed.
M & L for providing two coats of synthetic enamel painting to new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed .
M&L Plain Cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) 75 mm thick plinth protection complete all as specified and directed.
S&F Vitreous china squatting Pan of Orrisa pattern 580 mm x 440 mm white (excluding fixing bolt flushing cistern and flush pipe) incl connection to trap and to flushing pipe, etc complete including making good to floor complete all as specified and directed.
S & F of PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and S & F of 32 mm dia PVC flush pipe of suitable length and making all connection complete all as specified and directed.
S&F Viterous China wash basin white flat back size 550x400mm including CP Pillar tap 15mm, CP Waste coupling 32mm size, PVC waste pipe 32mm bore 750mm long, pair of brackets of mild steel 35x35x6mm size including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S&F Viterous China wash urinal, half stall type, white complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement incl 32mm dia PTMT waste coupling, 32mm dia PVC waste pipe and urinal spreader complete all as specified and as directed.
M&L for 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.
S&F of 15 mm bore galvanised iron tubes, 'medium grade' with all fittings and accessories and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F of 20 mm bore galvanised iron tubes, 'medium grade' with all fittings and accessories and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and as directed.
S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and as directed.
S&F floor trap of PVC 75 mm out let dia with grating and jointed to waste pipe complete all as specified and as directed.
M&L for PVC (SWR) 110 mm gully trap setting joining with solvent cement complete all as specified and directed.
S&F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F 20 mm bore ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm fixed complete all as specified and directed.
S&F brass chromium plated tubular towel rail 20mm dia 600 mm long fixed complete all as specified and as directed.
S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.
S&F for Aluminium extruded section Door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed complete all as specified and as directed.
M&L for Preparation of new concrete/plastered surface and appliying water proofing treatment to roof with APP (Atactic Poly Propylene) modified prefabricated five layer 3mm thick water proofing membrance super therolay of STP limited with non-women polyster male reinforced of 160gm, weight of membrance @3.6Kg/Sqm over solvant based bitumen primer , shalitex primer @ 0.3ltr/sqm by the same manufacturer conforming to IS-3384-1986 and applying two coats of aluminium paint on finished surfaces of roof treatment complete all as specified and directed.
Providing &fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG at all heights with GRG false ceiling tiles of size 595X 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS476(part4)-1970 and light reflectance of 85%(min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanised iron sec of 0.33 mm thick (galvanised @ 120 grams per sqm incl both sides) comprising of main -T runners of size 15x 32 mm of length 3000mm ,cross-T of size 15X32 mm of length 600 mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @80mm per sqm ) i'e 50mm long 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x 25 x 2 mm ,Galvanised iron perimeter wall angle of size 24 x 24x 0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications,drawing and as per directions of the Engr-in-Charge
S&F 2nd class clean sawn hard wood plain fillets square , trangular, or triangular, in section exc 13 & n.exc 25 sqcm clean sawn secured with nails complete all as specified and as directed.
M&L for 9mm thick pre laminated particle board, interior grade, prelaminated one side sith decorative choice lamination & other side balancing white lamination fixed with nails to timber frame works on walls complete all as specified and directed.
M & L for hard core of gauge not exc. 63mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
M&L 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) finished fair and even as in sub base Complete all as specified and directed.
M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 to receive floor finishes complete all as specified and directed.
M&L for chequred cement concrete tiles of size 300x300x25 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surface of tiles as foor/staps, complete as all specified and directed.
Removing excavated soil to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in sides of interlocking paver blocks complete all as specified and directed.
Surface dressing n.exc 15 cm deep in hard/dense soil complete all as specified and as directed.
Excavation over area n.exc 1.50m deep and getting out in any type of soil complete all as specified and as directed.
Excavating over areas, exc 1.5 m and n.exc. 3.00m deep and getting out in hard/dense soil complete all as specified and as directed.
M&L for Plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.
Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide,for rough finished surface of concrete complete all as Specified.
M & L Precast cement concrete block masonry type C-1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:4 complete all as Specified.
M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed.
M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, laid dry ccomplete all as specified and as directed.
M&L for providing,cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain faces and setting in cement mortar 1:4 complete all as specified and as directed.
M&L RCC M-25 (Design mix) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.
M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth (without using extra cement) complete all as specified and directed.
M&L Rendering 15mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finished even and smooth (without using extra cement) complete all as specified and directed.
S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed.
M&L for 20 mm mild steel TMT bar as in Rungs complete all as specified and as directed.
M&L for Preparation of surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
M & L for Plain cement concrete 1:2:4 type B-2 (using 20 mm graded crushed stone aggregates) in surface channels / drains, including necessary formwork, finished to required shape all as directed complete all as specified and as directed.
Extra for forming fair finished drain or channels 30 cm inner girth in Cement concrete using extra cement including forms, moulds mitred/ stopped ends etc. in manholes. ( inner girth only measured) complete all as specified and as directed.
Supply and fixing PVC (SWR ) bends (any radius) 150mm complete all as specified and directed.
Supplying & Laying, connecting and testing GI pipe 25 mm bore medium grade including necessary fittings in trenches complete all as specified and as directed.
Supply and fix Gun Metal Gate valve 25 mm bore dia with iron wheel head, complete all as specified and as directed.
M & L for Cutting and tapping in 25 mm water mains ( in position) for branch connections complete all as specified and as directed.
Supply and fixing switch piano flush button single pole one way 5 Amps complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing ceiling rose, surface bakelite, 65 mm x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed..
Providing exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvre complete including making hole in the wall and making good the disturbed surfaces complete all as specified and as directed.
M&L for sub main wiring with 2 run of 4 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate, ISI marked, non metallic PVC concealed conduit 20 mm dia size including all conduit accessories & fittings / junction boxes / inspection covers etc complete all as directed. Note : 1. The cost of conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4.00 Sqmm wire and one run of 4.00 Sqmm wire will be measured as one unit.
Supply and fixing sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 4 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint complete all as specified and as directed.
Supply and fixing sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint complete all as specified and as directed.
Supply and fixing SPN 40 to 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Supply and fixing SP 5 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete all as specified and as directed.
M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with stranded conductgor PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 2 core nominal cross section in service connections complete all as specified and as directed.
Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and as directed.
M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 15cm after laying, streching & testing of cable in trenches complete all as specified and as directed.. Note :- Only punned thickness i.e 18cm shall be measured and paid.
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.
M&L for 3 coats of white wash on newly plastered prepared surface complete all as specified and as directed.
Supply only water proofing compound complete all as specified.
S&F Vitreous china (EWC) pedestal pan and trap , including connection to drain ( or outgoing pipe ) and to flushing pipe antisyphonage pipe, with seat cover etc complete all as specified and as directed.
Rendering 20mm thick in cement mortar 1:4 using water proofing compound as per manufacturer's instruction in two layers, finished even and smoothe surface without useng extra cement as in roof (WPC will be measured and paid separately) complete all as specified and directed.
S&F rotational moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.
S&F 3 layer PP-R Polypropylene random copolymer outer dia of pipe 16 mm concealed pipes SDR 7.4 (PN-16) UV stabilzed and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall s, ceilins or in floors etc complete all as specified and as directed.
S&F 3 layer PP-R Polypropylene random copolymer outer dia of pipe 20 mm concealed pipes SDR 7.4 (PN-16) UV stabilzed and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall s, ceilins or in floors etc complete all as specified and as directed.
S&F 15 mm bore Angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed.
S&F bib taps,15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.
Supply and fix 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.
S&F for Steel windows/ventilators with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
Plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe complete all as specified.
S & F 150mm dia, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
M & L for two coats of synthetic enamel paint of approved tint on steel and iron surfaces of any description over 10 cm width or girth not otherwise described over a coat of red oxide complete all as specified and as directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with stranded conductor PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq.mm 2 core nominal cross section in service connections complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets including scantling complete all as specified and as directed.
Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section complete in framed work complete all as specified and as directed.
S&F of coloured PVC designer Modular wall clading 5 to 6mm thick with air gap between installed with U shapped GI Channel with end joints on edges (Designed, colour patterns as per directed by GE). The frame work will be fixed to wall using aluminium screws complete all as specified and as directed. Note :- If necessary size of the frame work/wall panelling will be changed as per site requirement
M&L for 6mm thick veneered decorative plywood grade 1 (with BWR resin) with decorative face veneered one side fixed with nails to timber frame on walls complete all as specified and as directed.
S&F aluminium anodised partition/windows/Ventilators with side hung shutters / sliding shutters and frame made with aluminium section with and including glass/particle board 12mm thick (as specified below) Aluminium sections shall be of size as given below:- Frame : 44.5x44.5x1.60mm thick Top/bottom rail; 90x44.5mmx1.60mm thick side style/rails of shutter-44.5x44.5mmx1.60mm thick Glass : 5mm thick plain glass, sun control film fixed with rubber gasket with aluminium beading . Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and making good of wall surface with matching to existing surface complete all as specified and directed
Taking down chowkhats or frame exc 1.50 sqm each but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.
Taking down chowkats or frame not exc 1.5 sqm each with shutters without taking off shutters from the frames complete all as specified and as directed.
S&F of 30mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass gauge etc divided into suqares with plain chamfered or rounded, mittered edges of framing plain, chamfered or rounded complete all as specified and as directed.
S & F 30 mm width of flap when open continuous piano hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
S&F 75 mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S&F in repair of galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F in repair of aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for coloured light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding of cement mortar 1:6 complete all as specified and as directed.
Demolition of Bricks work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
Material and labour for 25mm thick type B-1 PCC 1:2:4 (20mm graded aggregate in sub base all as specified and directed
Taking up or down 15mm dia steel tubing and connections, ccomplete all as specified and as directed.
Taking up or down 20mm dia steel tubing and connections, complete all as specified and as directed.
S&F in repair vitreous china squatting Pan of Orrisa pattern 580 mm x 440 mm with integral foot rest white with CI "P" or "S" trap front or back inlet including PCC bedding complete all as specified and directed
S & F in repair of PVC (Plastic polymer Cistern) low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc complete all as specified and directed.
S&F in repair of 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repair of 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair of Viterous China wash hand basin with pedestal coloured, flat back of 550 x 400 mm including brackets, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of 750mm long complete all as specified and directed
S&F in repair of 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair of 15mm bib taps, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repair of PVC connection 15mm size with PTMT nuts of length 450mm fixed complete all as specified and directed.
S&F 32mm bore and 800mm long PVC corrugated waste pipe complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) type C-2 (Using 20mm graded crushed stone aggregatre) as in floor levelling and finished even and fair without using extra cement complete all as specified and as directed.
M&L for 20 mm thick sceed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and as directed.
Dismantling water tanks of capacity exc 250 ltr & n exc 500 Ltr from any position complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and as directed.
S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and as directed.
Supply and fixing in repairs to flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 40 mm thick, ISI marked, complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering and wall cladding complete all as specified and directed by Engr-in-Charge
M&L for Galvanised, 0.50mm corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers/L type or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.
M&L for preparing old painted surfaces of steel or metal works and applying one coats of synthetic enamel paint over 10cm in width or girth complete all as specified and as directed.
S&F in repairs Brass CP sink mixer of 15 mm dia bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling etc complete all as specified and directed.
S & F Stainless steel wall mounted plate rack of size 900mm x760mm x 240mm, thickness of sheet not less than 1.0 mm and weight not less than 7.50 kg of approved design/pattern (as approved by Engr-in-charge) with provision for keeping plate and other crockery, fixed with screw and rawl plugs etc on wall complete all as specified and as directed.
M & L Black Granite (of any type) tiles 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishig types in cooking platforms and like including 15mm thick screed bed in CM 1:6 and dismantling of existing stone (kota/marble or granite) complete all as specified and as directed.
Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and including wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.
M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and including surface PVC Boxes of suitable size fixes with wall surface, Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following:-
One light / bell / buzzer / exhaust fan point controlled by one no, 1-way, 5 Amps switch.
One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.
One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.
All as per srl item no. 172.00 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.
S & F Modular switch 1 way 6A , 1 module size complete all as directed.
S & F Modular switch 1 way 16A , 1 module size complete all as directed.
S & F Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed.
S & F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.
S & F Modular cover plate with frame 6 module.
S & F Modular cover plate with frame 4 module.
S & F Modular cover plate with frame 3 module.
S & F Modular cover plate with frame 2 module.
S & F Modular cover plate with frame 1 module.
S & F Modular metal flash box 6 module.
S & F Modular metal flash box 4 module.
S & F Modular metal flash box 3 module.
S & F Modular metal flash box 1/2 module.
S&F, in repalcement, of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and as directed.
S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F in replacement exhaust fans made of sturdy Engineering plastic AC single phase 230/ 240 V of size 250 mm sweep with louvre complete in cluding making hole in the wall and making good the disturbed surfaces complete all as specified and as directed.
S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and as directed.
S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as specified and as directed.
S&F in replacement of MCB, C Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed.
M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of conduit & accessories is deemed to be included in quoted rates. 2. The two run of 6.00 Sqmm wire and one run of 6.00 Sqmm wire will be measured as one unit.
Taking up or down old LT cable of any type and size as directed.
Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 16 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and as directed.
M/S BILAL AHMAD BHAT
N K BUILDERS
M/S Web Company
M/S SONAM RIGZIN
M/S GLOBAL ENGINEERS
M/S MUNEER HASSAN AKHON
Takshos Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .