PROVISION OF TECH ACCN FOR MDC AGRA

Amount

Sch 'A' Part-I (Buildings Work) Note : This schedule is pre-priced by MES and the pre-priced rate indicated are under Col. 5.

Total amount of Sch 'A' Part II (Site clearance, excavation and earth work)

Total amount of Sch 'A' Part III (Internal Water Supply )

Total amount of Sch 'A' Part IV (Internal Electrification)

Total amount of Sch 'A' Part V (Sewage Disposal)

Total amount of Sch 'A' Part VI (Road, Path & Culvert )

Total amount of Sch 'A' Part VII (Area Drainage)

Total amount of Sch 'A' Part VIII (Compound Wall, Fencing & Gate)

Total amount of Sch 'A' Part IX (External Water Supply)

Total amount of Sch 'A' Part X (External Electrification)

Sch 'A' Part XI (Provisional sum) of Rs 9,75,236.00 for :- (i) Septic tank for 100 users designed to carry sewage and sullage water, excavation in any type of soil , PCC 1:4:8 type D-2 below foundation, RCC M-30 design Mix in walls, base slab, Baffle walls and roof slab including beam etc with vent shaft, manhole opening with cover connection etc, complete with effective depth of 1.5 m and over all depth of 3 m complete all as shown in Drg No TD/750, Sheet 1/2 & 2/2 - (01 No). (ii) Provn of Soak well 2.40 meter dia and 6.00 meter effective depth with and including excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed masonary with top ring M-25 design mix concrete including interceptings chamber and screen chamber made of brick masonary in CM 1:4 ,RCC cover slab of M-25 concrete / SFRC cover and interconnecting pipe of RCC /DWC complete all as shown in Drg No TD/576, Sheet 1/2 & 2/2 - (01 No).

Sch 'A' Part - XII (Miscellaneous Items) Note - This Schedule is not pre-priced by MES and the pre - priced rate indicated as "Rs 0.00 under col.5 siginifies this fact only.

INTERNAL WATER SUPPLY S& F health faucent (1.5 m tube) with hook (hand spray) with CP body complete all as specified and directed.

S& F Angle valve,cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe 15 mm bore complete all as specified and directed.

INTERNAL ELECTRIFICATION M&L for Point wiring complete for One light/Fan/Exhaust Fan point controlled by one switch with PVC (FRLS) insualted and unsheathed cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core cable including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.2 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red/blue/yellow, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Point wiring complete for One light point controlled by two way switches with PVC (FRLS) insualted and unsheathed cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core cable including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling and ceiling, pressed GI concealed terminal boxes not less than 1.2 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red/blue/yellow, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Point wiring complete for one 5 Pin 5 Amp switch Socket outlet point on an independent board, with PVC (FRLS) insualted and unsheathed cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core cable including ISI marked 20 mm dia PVC conduit medium grade concealed in wall / roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.2 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red/blue/yellow, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost..

M&L for Point wiring complete for one 5 Pin 5 Amp switch Socket outlet point on same board, with PVC (FRLS) insualted and unsheathed cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and MS conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.2 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red/blue/yellow, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :-In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Point wiring complete for one 6 pin 06/16 Amps switch socket out let on an independent board with PVC (FRLS) insulated and unsheathed cable 2.5 sqmm (nominal area) ,ISI marked, multi-stranded copper conductor single core cable including ISI marked 20mm dia PVC conduit medium grade concealed in wall and MS conduit in roof/floorslab excluding flush metal GI boxes complete,including 2.5 Sqmm PVC (FRLS) insulated unsheathed copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red/blue/yellow, Neutral-black and Earth- green with all accessories and all as specified Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

Supply and fixing Switch flush type 5/6 Amps single pole two way complete all as specified and dierected.

Supply and fixing Telephone Socket, ISI marked complete all as specified and dierected.

Supply and fixing Television Socket complete all as specified and dierected.

Supply and fixing LED batten Tube light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 FT 20 W), luminaire lumen >2000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed

S&F LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 feet 10 W) luminaire lumen >1000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed.

S&F LED Building security light fitting with aluminum pressure die cast housing, high purity PC Fresnel diffuser with silicon gasket for IP-65 protection, power consumption <34 W (14W) & luminaire lumen >3500 lm and system efficiency > 120 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers complete all as specified and directed.

S&F Mirror light Decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate body with Minimum 8 Watt & Maximum 11 Watt LED warm white in colour with a luminous efficacy of 120 lum/watt(min) with PF not less than 0.9 with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed.

S&F circular slim surface LED Down lighter of 8 Watts with housing made up of dia cast aluminium for better thermal management, high transmitivity non yellowing PMMA diffuser for better light output and uniform light distribution without glare, power consumption <10W, luminaire lumen>1000lm, driver and accessories to be prewired, CRI>70, LED efficiency > 120 lm/W photo biological safety report as per IEC624718 & electrical insulation class I, LED life with L70 criteries -37000 hrs colour temp >6000K, Ingress protection IP-20, ambient temperature 0 to 450C, driver efficiency >85%, THD<10% as per IEC 61000-3-2, power factor >0.95, surge protection 2.5 KV, two stages isolatated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM79 & LM80 certification complete all as specified and directed.

Supply and fixing LED luminare 600mm x600mm 35/36 watts 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamps suitable for roof/ceiling/surface mounting type including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

Supply and fixing decorative watt mounting engagement light chrome finish fixture with textured glass including 11 Watts Red and Green LED lamp complete all as specified and directed.

Supply and fixing Ceiling fan 1200 mm sweep single phase 230V AC, ISI marked alongwith steel down rod and connecting up the fan to ceiling rose including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to ceiling fan motor not less than 0.5 mtr long with PVC connector 2 way/3 way for connection complete all as specified.

Supply and fixing Ceiling fan 1400 mm sweep single phase 230V AC, ISI marked alongwith steel down rod and connecting up the fan to ceiling rose including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to ceiling fan motor not less than 0.5 mtr long with PVC connector 2 way/3 way for connection complete all as specified.

S&F of Exhaust Fan high quality engineering plastic, resistant to colour change with anti- statio properties (ventil air) 300 mm sweep with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side(outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable rubber insulated from celling rose to exhaust fan motor complete all as specified and directed.

Supply and fixing Exhaust Fan high quality mettalic body, resistant to colour change 380 mm sweep, 900 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side(outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit pipe from celling rose to exhaust fan motor complete all as specified and directed.

Supply and fixing Exhaust Fan high quality mettalic body, resistant to colour change 450 mm sweep, 900 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side(outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit pipe from celling rose to exhaust fan motor complete all as specified and directed.

S&F MCCB of rating 125 Amps, 4 pole, 415 Volts, AC fixed type with breaking capacity 25 KA DPX3 160 type, as per ICE-60947-2 Ics 10 % of Icu. Adjustable tripping 0-0.3-1-3s with adjustable 70 % to 100% and thermal magnetic release to be fixed in existing LT panel for taking In coming electric connection for VTPN DB complete all as specified and directed

S&F MCCB of rating 100 Amps, 4 pole, 415 Volts, AC fixed type with breaking capacity 25 KA DPX3 160 type, as per ICE-60947-2 Ics 10 % of Icu. Adjustable tripping 0-0.3-1-3s with adjustable 70 % to 100% and thermal magnetic release to be fixed in existing LT panel for taking In coming electric connection for VTPN DB complete all as specified and directed

S&F MCB TP 63 Amps 'B' series,10 KA 240 Volts, AC complete all as specified and directed.

S&F MCB SPN 40 Amps 'B' series,10 KA 240 Volts, AC complete all as specified and directed.

S&F MCB SP 6 to 32 Amps 'B' series,10 KA 240 Volts, AC complete all as specified and directed.

S&F MCCB VTPN DB double door type, 415 Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed. Note: MCCB shall be measured and paid seprately under respective item.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 12 way ISI marked all as specified and directed

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 8 way ISI marked all as specified and directed

Submain wiring with two single core 2.5 sqmm FRLS copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 2.5 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connection to earth dolly complete all as specified. Note:- (i) Two single core 2.5 sqmm copper conductor, one run PVC conduit and one run of 2.5 sqmm earth wire shall be considered & measured as one unit. (ii) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

Submain wiring with two single core 4 sqmm FRLS copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 4 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note:- (i) Two single core 4 sqmm copper conductor, one run PVC conduit and one run of 4 sqmm earth wire shall be considered & measured as one unit. (ii) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

Submain wiring with two single core 6 sqmm FRLS copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note:- (i) Two single core 6 sqmm copper conductor, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit. (ii) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x6 mm thick buried directly in ground (earth pit not less than 2.5 M below normal ground level ) with top edge of the plate not less than 1.75 M below normal ground level connected to and including galvanized steel wire 4mm dia as earth lead Earth plate to pole test point including 25mm GI light grade pipe for earth protection from earth point to earth plate surrounded by 150mm thick alternate layers of charcoal dust mix all with 35% common salt, 20mm bore medium grade GI Pipe for watering PCC pit type 1:3:6 type C-1 using 20mm graded stone aggregate, with RCC 50mm thick cover in 1:2:4 Type B-1 reinforced with 8mm dia TMT bars @ 8mm c/c both way. GI check nut, funnel with wire mesh necessary excavation and earth work in any type of soil all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 complete all as specified and directed.

EXTERNAL WATER SUPPLY Construction of fly ash brick masonry valve pit chamber of size 600 mm X 600 mm X 600 mm (internal dimensions) including necessary excavation & earth work, 100 mm thick PCC (1:4:8) type D-2 as in foundation, 230 mm thick fly ash brick work in cement mortar (1:4), 12 mm thick rendering in cement mortar (1:4) on internal surface of valve pit and mild steel sheet cover of 6 mm thick and angle iron of size (50 x 50 x 6) mm frame around of valve pit, sheet welded on all four corners, locking arrangement with pad lock of size 50 mm brass, 6 levers and in duplicate key (Make - Godrej or equivalent make as approved by GE complete) including two coat of approved synthetic enamel paint over one coat of red oxide primer on prepared steel surface complete all as specified and directed.

M&L for horizontal boring below pavement/road, in soft/loose soil for crossing 100mm to 40mm size GI pipe lines all as specified and as directed. Note :- Excavation, returning filling, removal of surplus soil shall be measured and paid separately

EXTERNAL ELECTRIFICATION Supply, installation commissioning and testing of LED Solar street light fitting Aesthetic and compact design in extruded aluminium construction 25 Watt IP-65 monocrystalline silicon panel respectively Lithium Ferro Phosphate (LifePo4) battery respectively 12.8V 22Ah solar panel, charge controller with dusk down sensor complete High efficiency SMD LEDs with CRI >80, lighting system efficiency upto 120 Lm/W, CCT – 5700o K to 6500o K Secondary lens optics for streetlighting application Full Power upto 12 hrs, Saving mode upto 48 hrs Integral PIR sensor MPPT charge controller with 90 to 96% efficiency including galvanized steel pole Height 7m Suitable for external pipe dia of 80 to100 mm. complete all as specified. (Note :- Earth work & PCC for foundation shall be measured and paid separately)

Supply & fix, outdoor security light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Supply & fix NEW GENERATION POST TOP energy saving envirmental friendly long life 35 watt LED luminaire light fitting, IP 65 protection with reflector cover electronic driver, connector block etc with internally prewired fixed to brcket on gate with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Supply and fix MCB DB 4 way sheet metal enclosure triple pole and neutral 415 volts with 100 Amp standard copper bus bar IP-43, IK-09 with metal doors of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mouting type double door factory fabricated complete as per IEC 61439-3 suitable for MCB, 4 pole as incomer & MCB SP as outgoing along with provision of blanking plates in vacant modules all as specified and directed .

Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 100 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 and MCB, SP as outgoing as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete alongwith provn of blanking plates in blank modules all as specified and directed by Engr-in-Charge.

Supply and fix MCCB 4 pole, rating 100 Amp, Icu =16 Kilo Amp and Ics 100% of Icu with adjustable overload 70% to 100% and thermal magnetic release to be fixed in VTPN DB as incoming switchgear.

Supply & fix Isolator TPN, 4 Pole, 415 Volts, 50 Hz AC Supply , 'C' series 40 Amps, IP-20 as per IEC 60947-3 ISI marked complete all as specified & directed.

Supply & fix MCB SP 'C' series, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked to be fixed in VTPN/TPN DB outgoing circuit line of capacity as per circuit load between 40 to 63 Amps, shall be decided on the basis of circuit load complete all as directed.

Supply & fix MCB SP 'C' series, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked to be fixed in MCB SPN DB outgoing circuit line of capacity as per circuit load between 6 to 32 Amps, shall be decided on the basis of circuit load complete all as directed.

HEATING AND COOLING APPLIANCES Supply, install, commisioning & testing hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating as manufactured by OEM but not less than minimum 3 star rating and EER 3.2 of capacity 2.0 TR complete all as specified and directed.

Supply, install, commisioning & testing hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating as manufactured by OEM but not less than minimum 3 star rating and EER 3.2 of capacity 1.5 TR complete all as specified and directed

Supply & fix commiosnig and testing of complete power cum starter unit compressing of ON/OFF switches socket 3 pin socket outlet with plug top modular type made out of white polycarbonate, fire retardant, UV stabilized power unit internally pre-wired with suitable size copper conductor cable with overload protective device (MCB) complete unit fixed in single polycarbonate housing with inlet & outlet cable port suitable for AC & geyser operated at single phase, 240 volts, 50 Hz AC supply of capacity 16 to 25 Amps load bearing capacity complete all as specified and directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket complete with one No MCB, SP, 20 Amps, 230 Volts, 10KA 'C' series complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA complete all as specified and directed.

Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of 40 Ltrs per hour and storage capacity of 80 Ltrs with 2 Nos cold water outlet complete all as specified and directed.

Supply and install refrigerators, electric driven, single phase of capacity 165 Ltrs or nearest higher size 5 star rating complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including fastener mild steel 100 mm long x 10 mm dia with pin and bolts complete for hanging of geyser all as specified and directed

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1.0 KVA complete all as specified and directed.

M/s Shrangi Rishi Construction

M/s J S & SONS

S. K. CONSTRUCTION

yash enterprises