REPAIR/ REPLACEMENT OF WOODEN/STEEL AND ALUMINIUM JOINERIES, FALSE CEILING AND WALL PANELLING ETC IN TECHNICAL AREA AT AFA HYDERABAD

Amount

Taking down shutters n.exc 1 sqm each complete all as directed.

Taking down shutters exc 1 sqm but n.exc 2 sqm each complete all as directed.

Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description (without taking off shutters from the frame) complete all as directed

Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description (without taking off shutters from the frame) complete all as directed

S&F 35mm thick second class hard wood Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial venneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S&F of factory made 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats

S & F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube complete all as specifid and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc complete all as specified

S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified (Powder coating should not be less than 50 micron)

S & F powder coated aluminium windows and ventilator shutters, sliding type, without sash bars aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips , rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as rollers, locking arrangement, handles etc complete all as specified. (Powder coating should not be less than 50 micron)

S & F 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination in aluminium doors/partition complete all as specified and directed

Dismantling wall and ceiling boards( fibre, pulp,insulation,etc) or insulation boards/slabs/blankets, any thickness,including cover fillets , aluminium frame work etc of any description complete all as specified and as directed by Engr-in-charge

S & F for suspended false ceiling grid system with galvanised steel section framework including fitting 1200mm long cross channels that have to be interlocked between main runners at 600mm centers making a module of 1200x600mm, cross channels to be suspended independently and fixing 12mm thick plain gypsum boards (POP Boards) and treated with plaster of paris for flush look and applying two coats of distemper, oil emulsion over a coat of primer over putty of required thickness complete all as specified and as directed by Engr-in-charge

Supply and fix only Armstrong Ceiling Classic Lite 600x600x16mm, NRC-0.55, grid size m/t 32x24mm, cross Tee of 1200mm of size 27x24 mm and cross Tee of 600mm of size 25x24 mm and wall angle of size 19x19mm and fixed all around the wall to form a grid of size 600x600. Tiles shall be inserted in the formed grid and suspended with 2mm GI wire at every 1200mm intervals C/C

Supply and fix only Armstrong Ceiling Classic Lite 600x600x16mm, NRC-0.55, grid size m/t 32x24mm boards including taking down old ceiling boards all as specified and directed

S & F in repair 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with nails complete all as specified and directed

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engr-in-charge

Dismantling boarding, any description, fixed any position with nails complete all as specified and directed.

M&L for 18mm thick plywood of grade (BWP), type BB fixed with nails as in cupboards/Almirah Shutters all as specified and as directed

M & L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified.

M & L for Brass handles, cast type, polished bright 150 mm long all as specified and directed

S&F Brass Locks cupboard grade I, size 50 mm brass 4 levers

S&F Steel Auto closing concealed Hydraullic soft closing Hinges of size 116x 60 mm with holes fixing with screws for cabinet doors complete as specified and directed.

S&F in repair Continuous (piano) hinges, brass width of flap 30mm bright finish or electro galvanised

M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Hacking out old unserviceable glass / broken glass panes of any description, from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones in repairs complete all as specified and as directed.

S&F rough cast wired glass, 6.4mm thick and glazing with oil putty in square not exc 0.5 sqm all as specified and directed

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm and in aluminium frames in each pane complete all as specified and as directed.

S&F 4mm thick frosted glass sheet and glazing with oil putty in squares n .exc 0.5 sq. m in each pane complete.

S & F 4.80 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M & L for taking down existing aluminium doors, resecuring or easing & adjusting and refixing in same opening after necessary repairs for smooth functioning of any description exc 1 sqm but not 2.5 Sqm each all as specified and directed by Engr-in-Charge

S&F of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete.

S&F in repair of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete.

S & F in repair 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F in repair 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F in repair 50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F of Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 100 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 200 mm long etc complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

S&F of Aluminium anodised,barrel tower bolts of extruded section of size 150mm long etc complete all as specified and as directed.

S&F of Aluminium anodised,barrel tower bolts of extruded section of size 100mm long etc complete all as specified and as directed.

S&F in repair Aluminium handles, cast type, anodised of size 125 mm long etc complete all as specified and as directed.

S&F in repair of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed.

S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed..

S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 150 mm long etc complete all as specified and as directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished etc complete all as specified and as directed.

S & F in repair of 125 mm Hasp and staple, safety type, aluminium hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified.

S&F in repair Fancy type 20mm dia curtain rod , chromium plated with fixing brackets, stops, rollers etc

S&F in repair Fancy type 25mm dia curtain rod , chromium plated with fixing brackets, stops, rollers etc

S&F 140mm Floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in Repairs 140mm Floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F of Mortice lock, of brass 4 levers vertical type of size 100 mm etc complete.

S&F in repair of Mortice lock, of brass 4 levers vertical type of size 100 mm etc complete.

S & F door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg fixed in repairs complete all as specified and as directed.

S & F in repairs door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg fixed in repairs complete all as specified and as directed.

S&F in repair for toughened glass door bottom lock fittings made of stainless steel complete all as specified and directed

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

M & L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete.

S&F Bird Proofing HDPE nylon Mesh 30 mm aperture size and 1.8 mm dia Make LEO TCHNOVA or equivalent including tying with nylon wire as per manufacturer instructions all as specified and directed. Note : The work shall be carried out at 8 to 10mtrs height in ceilings/sides of hanger roof. The rate quoted shall be deemed including necessary arrangement of ladder/scaffoldings etc. The quantity given is to be fixed at multiple hangers in patches of any size as per requirement of site.

Labour only for securely tying / tightening the loose bird proofing net with required GI/PVC/Nylon wire for securing as required at a height up to 10mtr from the FFL at varius locations in technical area complete all as specified and directed Note : The work shall be carried out at 8 to 10mtrs height in ceilings/sides of hanger roof. The rate quoted shall be deemed including necessary arrangement of ladder/scaffoldings etc. The quantity given is to be fixed at multiple hangers in patches of any size as per requirement of site.

Vipin Kumar and Brother (BID ID -3140866)

S J REDDY (BID ID -3133871)