Open Tender Notice For Annual Maintenance of Chausathi Yogini Temple at Hirapur, Bhubaneswar, Dist- Khordha for 2024-25

Amount

Annual Maintenance of Chausathi Yogini Temple at Hirapur, Bhubaneswar, Dist- Khordha

Item No.2: Supply of FRP make drinking water kiosk (4’-6’’ X 4’-6’’ X 8’-0’’) having 1 No. of door on one side with 02 Nos. louvered window including the cost of platform, fixing freight etc. complete, Constructional feature (i) Door made of FRP, (ii) The cabin has to in moulding made of FRP 3mmthick for wall and roof, (iii) Flooring is to be of sandwiched laminate with a FRP laminated surface, (iv)The clear height of the Cabin floor is to be minimum 6’’ from the bottom of the floor and (vi) The roof has to be made of FRP with decorative sides and insulated.

Item No. 3 : SITC of Water Cooler-cum-purifier towards providing pure drinking water to the tourist (Water storage Capacity-80Liter Water cooling Capacity-60Liter per hour, Water cooling capacity with 10degree C-Temperature, drop-65 Liter per hour, No. of faucat-02 (1 Cold & 1 normal)

Item No. 4:Construction of finely dressed on both side, Laterite stone masonry towards repairing of boundary wall, obtained from an approved quarry in superstructure with mix 1:4 (1 Cement : 4 Couarse Sand) or as directed.

Item No. 5 : M.S work welded in built up sections framed work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required on boundary wall, as per existing design.

Item No.6: Painting with synthetic enamel paint with two or more coats of approved brand and manufacture to give an even shade at M.S. grill structure of Boundary wall.

Item No. 9: Repairing of existing store room :

Item No. 9.1: Dismantling tile work For thickness of tiles 10 mm to 25 mm in floors laid in cement mortar including stacking material within 50 metres lead at drinking water shade of 64-Yogin temple, Hirapur.

Item No. 9.2: Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead at store room of 64-Yogin temple, Hirapur

Item No. 9.3: Providing and laying grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) at store room roof of 64-Yogin Temple Hirapur.

Item No. 9.4: Providing and laying cement concrete in bed blocks, sunken floor etc., up to floor five level, with 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) at drinking water shade of 64-Yogin Temple Hirapur

Item No. 9.5: 20 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand) at inner and outer of store room-I & II of 64-Yogin Temple, Hirapur.

Item No. 9.6: Steel work hot finished seamless type tubes in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete at drinking water shade

Item No. 9.7: Providing corrugated G.S. sheet roofing 1.00 mm thick with zinc coating not less than 275 gm/m² including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required at drinking water shade of 64-Yogin Temple Hirapur.

Item No. 9.8: Providing ridges or hips 0.80 mm thick with zinc coating not less than 275 gm/m² of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete at drinking water shade.

Item No. 9.9: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 32 mm nominal dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work

Item No. 9.10: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm nominal dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work

Item No. 9.11: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 40mm nominal dia for external work, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of site in Charge for drinking water shade, Store Room of 64-Yogin Temple, Hirapur.

Item No. 9.12: Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade for new work (two or more coats) over and including water thinnable priming coat with cement primer at store room –I & II inner and outer side

Item No. 9.13: Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete at drinking water shade.

Item No. 9.14: IProviding and fixing 1mm thick M.S. sheet door with frame of 40 x 40 x 6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Item No. 9.15: IPainting with synthetic enamel paint two or more coats on new work over an under cot of suitable shade with ordinary paint or approved brand and manufacture of approved brand and manufacture of required colour to give an even shade at door & window of Store room-I & II

Item No. 9.16: IWiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 Sq.mm FRLS PVC insulated copper single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

Item No. 9.17: IWiring for circuit/ sub-main wiring 2 X 2.5 sq.mm + 2.5 sq.mm earth wire along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

Item No. 9.18: Supplying and fixing following way, single pole and neutral, sheet steel, MCCB distribution board, 240 V, on surface recess, complete with tinned copper bus bar, neutral bus bar, din bar, inter connection, powder painted including earthing etc as required.

Item No. 9.19: Earthing with G.I earth pipe 4.5 mtr long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required

Item No. 9.20: Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loof earthing as required at Store room and drinking water shade.

Item No. 9.21: Providing and fixing for electrical equipment (Led Surface light, exhaust fan, ceiling fan, Outer wall light etc ) and Sanitary item for Store room and drinking water shade.

Item No. 9.21.1: Led bulb light 10Wt

Item No. 9.21.2: Exhaust Fan (modular)

Item No. 9.21.3: Ceiling Fan (approved brand)

Item No. 9.21.4: Wall mounted street light 25 wt

Item No. 9.21.5: MCCB 32A

Item No. 9.21.6: Check Valve

Item No. 9.21.7: FTA 15mm

Item No. 9.21.8: Bib Cock (Steel/ Cromium)

Item No. 10: Providing and fixing of signage for approved design of C.N.B. (1.15 m wide x 3.00 m breadth of plaque including providing sufficient supporting arrangement for durability), on Sand stone including dressing, molding, engraving letter in Tri-language and fixing etc all complete at 64-Yogin Temple, Hirapur, Bhubaneswar.

SHASANK SEKHAR NAYAK (BID ID -3136089)

BIBHUDANANDA MOHANTY (BID ID -3136534)

CHITA RANJAN ROUTRAY (BID ID -3135240)