Construction of Community Centre in Ward No. 18 MC Hansi.

Amount

Providing, fixing, jointing and testing uPVC mineral filled floor traps of self cleansing design with water seal not less than 50 mm., with or without vent, jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry

Providing and fixing health faucet with 1.2 m long flexible tube and wall hook including all fittings.

Providing and fixing C.P. cast brass twin coat hooks fixed to PVC rawl plug with SS screws.

Providing and fixing water tank filling alram system

Providing and Fixing of stainless steel grating with rim of approved design including setting in floor with cement mortar. (For Floor Trap/Floor Drain)

Providing and fixing uPVC pipe conforming to IS:4985 (10 kg/sq cm) including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge and as per layout. 40mm

Providing and fixing uPVC pipe conforming to IS:4985 (10 kg/sq cm) including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge and as per layout.110mm

Providing and fixing uPVC pipe conforming to IS:4985 (10 kg/sq cm) including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge and as per layout.150mm

Providing and fixing floor drain fixed with cement mortar complete in all respect.110x50

Providing and fixing water pump for tank filling (1W plus 1S)

Providing and fixing 100 mm dia uPVC hopper approximately 300 mm long with maximum 3 inlets 32, 50 or 63 mm size fabricated from uPVC heavy duty pipes , sockets, fixed to UPVC trap with joint and set in cement concrete mix 1:2:4 complete as per standard drawing .100mm dia

Providing and fixing 15mm flexible pipe 15 mm dia

Providing and fixing of approved coloured verticle type hot water 25 ltr geysers. The inner container shall be made of copper sleeve with PUF insulation between inner and outer container, element pipe and heating element, pressure cum vaccume release, thermostat and thermal cutout arrangements and fusible plug. The outer container shall be of powder coated finish with all other accessories including fixing brackets complete as required.

Providing and fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia and Easy flex Tube with accessories complete I all respect

under ground water storage tank as per civil work

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 40mmnominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 50mm nominal bore

Providing and fixing of Blackout vertical Blinds on all the office Windows with Pelmets and paint over it.

Providing and fixing of Acrylc Letters with ACP Channel with light (Raising 50mm ) of 36` Height with power Supply and Warrenty of 2 years with fittings complete with all respect.

SUPPLYING , INSTALLATION , TESTING and COMMISIONING OF 16 PASSENGER LIFTS OF FOLLOWING SPECIFICATION HAVING 2 STOP S AND APPROXIMATE TRAVEL DISTANCE OF 9 M HAVING FOLLOWING SPECIFICATIONS Passenger Elevator (Not less than 800 kg) elevator having speed of 1.5 meter per second Serving different floors in the existing lift shaft of size 1.8m x 3m following this code IS: 4666. 1968 for electric passenger lifts and shall further Comply to IS : 1860:1960, IS: 63831,1971, IS: 732: 1963 and Bombay lift act 1943 amended up to date and walls finish in Stainless Steel HairlineLED spotin ceilingCar doors finish in Stainless Steel HairlineCar door in Stainless steel finishGranite Flooring finish in Black SeaDeco Ceiling finish in Stainless Steel Mirror 304Full height mirror on rear car panel Car Operating PanelStylish, touch sensitive glass panelDoor open/close and alarm buttons Complete in all respect as per Satisfaction of Engineer-in-charge.

Supply, Installation, testing and Commissioning of the following lighting fixtures with all fixing accessories etc. complete as required.(NS)…………… 07 Watt Downlights- Recessed Mounted

Supply, Installation, testing and Commissioning of the following lighting fixtures with all fixing accessories etc. complete as required.(NS)……………9W LED Mirror light with accessories as complete required..

Supply, Installation, testing and Commissioning of the following lighting fixtures with all fixing accessories etc. complete as required.(NS)……………18W LED Tube light with accessories as complete required..

Providing and fixing of Circular C.I. Box for ceiling fan internal dia 140 mm, 73 mm height, top lid of 1.5mm thick MS sheet.

suction Centrifugal monobloc Pump ,CI Impeller , three phase , CI casing , with mechanical seal, model LBI 33, sucxdel 65x50, 25 mtr head 900LPM

Supplying, installing and commissioning C.I. flanged `Y` type Strainer with SS screen, suitable flanges, nuts, bolts, gaskets etc. complete.100mm dia

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.25 mm nominal dia ( Air vessel tank and Pressure switch manifold)

Supply and installation testing and commissioning of differential Pressure switches of suitable range (0 to 12 bar) for pumpsets complete with necessay Ball valves, Fittings like unions / colors / reducers etc.( Standard type for main pump and Differential type for Jockey Pump)

Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of of 250 mm dia MS pipe to 1000 mm long complete with 25mm inlet, 25mm drain, 25mm dia connection for air release valve including legs, painting with red oxide primer and finished with fire red enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto pump header and other accessories etc.

Single headed hydrant valve as per IS 5290, made of gunmetal with 63 mm dia instantaneous outlet of 80 mm dia flanged inelt ,Blank caps , chain and hand wheels etc complete.

15 M long, 63mm dia RRL hose confirming to IS 636 with gun metal instantaneous couplings and Hoses shall be stored inside the hose cabinet.

Hose reel drum of swinging type with 19mm dia Rubber braided hose of 30m length with Ball valve and Shut off nozzle, complete.

Fire duct Shutter fabricated out of M.S. sheet and frame, door shall be 600mm x 1200 mmx2100mm min. and fixed with 4 mm thick Glass, suitable Rubber beading and Locking arrangement. Quoted rate shall be includes all fasteners etc, and complete shutter shall be powder coated finish of red colour both inside and out side.

Supplying and fixing of approved make 25mm dia. automatic air release valve with unions etc. complete.

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 100mm nominal dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 80mm nominal dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 100 mm nominal dia

ABC powder type fire extinguisher of 6 Kgs. Capacity, with initial filling (Mono Ammonium Phospate Powder) in brand new cylinder with powder coated finish, Stored Pressur type, Pressure Gauge, Controllable discharge mechanism with Hose and Nozzle , confirming to IS:15683:2008.

Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, Co2 gas as per IS 15222 with controll discharge mechanism fitted with Hose and Horn applicable on Class B fire rating 21B confirming to IS: 15683:2008. CO2 Cylinder as per IS 7285 with ISI mark.

Supply and Fixing of signs Auto-Glo, (list of design attached), based on acrylic, single sided wall pasted size 12” x 6”

Bidder Name

Amount

Shishpal Govt. Contractor (GSTN-06AKPPP4326H1ZX) BID ID -1139644

Sandeep Govt. Contractor (GSTN-06EIUPS6130R1Z6) BID ID -1139709

Sandeep Govt. Contractor

Sandeep Govt. Contractor