ELECTRIC WORK

Amount

fo|qr forj.k [k.M [kqtkZ ds vUrxZr uxj fudk; ;kstu esa 11@0-4 dsoh midsUnz fuekZ.k] {kerko`f)] ykbZu fuekZ.k] ttZj rkj] dsfcy iksy cnyuk] rkj cnyuk] xkfMZx] ,p0Vh0 ,oa ,y0Vh0 ykbZu fuekZ.k] iz.kkyh lqn)hdj.k dk dk;Z] {kfrxzLr ohlhch cnyus] 33@11 dsoh midsUnzks dk lq)hdj.k] izksVsD'ku] 11@0-4 dsoh midsUnszk dk lq)hdj.k ,oa izksVsD'ku bR;kfn laca/kh dk;

Safe carriage of store material from store center to Pit site with loading & unloading at both ends respectively without contractor porvading all item etc. distance within- 0 to 50 Km

ST Poles 13 mtr. long

PCC Poles 11 mtr. long

PCC Poles 8.5 mtr. long

Safe carriage of store material from store center to je store/nearest work site & then to pit site with loading & unloading at both ends respectively without contractor porvading all item distance within- 0 to 50 Km

T/F 63 KVA 11/0.4 KV

T/F 100 KVA 11/0.4 KV

T/F 250 KVA 11/0.4 KV

T/F 400 KVA 11/0.4 KV

ACSR Dog Conductor

ACSR Weasel Conductor

LT ABC 3*50 sq mm

LT ABC 3*95 sq mm

LT ABC 3*120 sq mm

11 KV XLPE CABLE (3X70) sq.mm

11 KV XLPE CABLE (3X120) sq.mm

11 KV XLPE CABLE (3X185) sq.mm

11 KV XLPE CABLE (3X300) sq.mm

33 KV XLPE CABLE (3X300) sq.mm

33 KV V TYPE CROSS ARM

11 KV V TYPE CROSS ARM

11 KV VCB N/G CTR 200/100/5

11 KV VCB N/G CTR 600/300 5A

1*240 SQ MM SINGLE LEAD

1*400 SQ MM SINGLE LEAD

1*120 SQ MM SINGLE LEAD

11 KV do FUSE SET

11 KV Pin Insulater

11 KV Disc Insulater

33 kv pin insulater

33 KV Disc Insulater

24 VOLT BATTER set

24 VOLT BATTER CHARGER

33 KV CONTROL PANEL SINGLE T/F

33 KV TPMO

Three Phase Distribution Box

Loading, Safe carriage & unloading of heavy stock material channel, Angle and other site requerment any mattrial ETC from store center to JE Store/Sub Station with proper stacking of material, distance within 30 Kms.

Erection of Single pole all size as per RESPO Drawing, fitting with all accessories Pin Insulator, F Bracket and etc as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

PCC Poles 11/13 mtr. long

PCC Poles 8.5 mtr. long

Excavation of For Each and grouting of Single Pole as per RESPO Drawing and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. The support shall be grouted with cement, sand and stone ballast in ratio 1:4:8 including the cost of Cement, Sand, Stone Ballast, Stone Pad etc. as per actual site requirement

PCC Poles 9/11/13 mtr. long

PCC Poles 8.5 mtr. long

Erection of Dobule Pole all size as per RESPO Drawing, fitting with all accessories Pin Insulator, F Bracket and etc as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

PCC Poles 9/11/13 mtr. long

PCC Poles 8.5 mtr. long

Excavation of For Each and grouting of Dobule Pole as per RESPO Drawing and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. The support shall be grouted with cement, sand and stone ballast in ratio 1:4:8 including the cost of Cement, Sand, Bricks/Stone Ballast, etc. as per actual site requirement

PCC Poles 9/11/13 mtr. long

PCC Poles 8.5 mtr. long

Laying sagging stringing and binding and jumpering etc of following Conductor/ABC/XLPE of size on the newly erected poles as per RESPO manual and as per direction of Supervising Engineer. It includes the cost of labour, T&P, carrier etc. required for proper completion of work.

33 KV XLPE CABLE (3X300) sq.mm

11 KV XLPE CABLE (3X300) sq.mm

11 KV XLPE CABLE (3X185) sq.mm

11 KV XLPE CABLE (3X70) sq.mm

ACSR Dog Conductor

ACSR Weasel Conductor

LT ABC 3*120 sq mm

LT ABC 3*95 sq mm

LT ABC 3*50 sq mm

Mounting of Distribution Transformers.

T/F 63 KVA 11/0.4 KV

T/F 100 KVA 11/0.4 KV

T/F 250 KVA 11/0.4 KV

Installation and fixing of Distribution Transformers.

T/F 63 KVA 11/0.4 KV

T/F 100 KVA 11/0.4 KV

T/F 250 KVA 11/0.4 KV

Providing and fixing of Telless Unit with Structure.

Providing, fabricating carrying & fixing of Henley type Tailless Fuse Unit hook type arrangement single circuit having 3 Phase + Neutral arrangement ( 1 Nos single circuit tailless unit of heavy duty brass material stud type taillness unit having 300AMP capacity in box) in frame made of 70cmX50cmX6mm frame MS angle box with heavy duty Aluminium lugs suitable for 300 Amp load on at least 2 ft height from ground on plinth for safe installation or fixing of tailness unit box at MS angle frame support on Pole horizontially/vertically as per site requirement as per site required direction of Engineer incharge

Providing, fabricating carrying & fixing of Henley type Tailless double circuit Fuse Unit hook type arrangement having 3 Phase + Neutral arrangement in each leg ( 2 Nos single circuit tailless unit of heavy duty brass material stud type taillness unit having 500AMP capacity in box) in frame made of 70cmX50cmX6mm frame MS angle box with connecting suitable length copper busbar 50mm wide and 6mm thick for connecting studs for main T/F cable with heavy duty Aluminium lugs suitable for 500 Amp load on at lest 2 ft height from ground on plinth for safe installation or fixing of tailness unit box at MS angle support frame on Pole horizontially/vertically as per site requirement on available pole support at safe height as per site conditions as per site required direction of Engineer incharge.

Providing, fabricating carrying & fixing of Henley type Tailless double circuit Fuse Unit having 3 Phase + Neutral arrangement in each leg ( 2 Nos single circuit tailless unit of heavy duty brass material stud type taillness unit having 600AMP capacity in box) in frame made of 70cmX50cmX6mm frame MS angle box with connecting suitable length copper busbar 50mm wide and 6mm thick for connecting studs for main T/F cable with heavy duty Aluminium lugs suitable for 600 Amp load on at lest 2 ft height from ground on plinth for safe installation or fixing of tailness unit box at MS angle support frame on Pole horizontially/vertically as per site requirement on available pole support at safe height as per site conditions as per site required direction of Engineer incharge.

Providing, fabricating carrying & fixing of Henley type Tailless triple circuit Fuse Unit hook type arrangement having 3 Phase + Neutral arrangement in each leg ( 3 Nos single circuit tailless unit of heavy duty brass material stud type taillness unit having 800AMP capacity in box) in frame made of 70cmX50cmX6mm frame MS angle box with connecting suitable length copper busbar 50mm wide and 6mm thick for connecting studs for main T/F cable with heavy duty Aluminium lugs suitable for 800 Amp load on at lest 2 ft height from ground on plinth for safe installation or fixing of tailness unit box at MS angle support frame on Pole horizontially/vertically as per site requirement on available pole support at safe height as per site conditionsas per site required direction of Engineer incharge.

Erection of stay set including the work of nozelling etc. as per RESPO manual and also including the cost of all grouting material, labour, T&P etc required for proper completion of work.

Grouting of stay set including the work of nozelling etc. as per RESPO manual and also including the cost of all The support shall be grouted with cement, sand and stone ballast in ratio 1:4:8 including the cost of Cement, Sand, Stone Ballast, Stone etc. as per actual site requirement , labour, T&P etc required for proper completion of work.

Providing and fixing of Barbed wire.

Fixing of earthing rod and Wire as per RESPO manual and as per direction of supervising engineer including the cost of labour, T&P etc. required for proper completion of work.

Cutting/drilling/Welding of MS Channel Top Channal, site channel, site angle, Dropper Channal & Cross brassing angle and MS mattriel Including the work of fixing on STP Pole for construction of the line.

Making Jumpers on Section Points, by fixing of proper sizes, suitable for ACSR Conductor. Sectional Double/Four Pole.

Mounting of 11 KV VCB N/G CTR 200/100/5 Sub Station to Control Room by Hydra and manual Labour.

Mounting of 11 KV VCB N/G CTR 600/300 5A Sub Station to Control Room by Hydra and manual Labour.

Fixing/Installaiton of 11 KV VCB N/G CTR 200/100/5

Fixing/Installaiton of 11 KV VCB N/G CTR 600/300 5A

Making of new Plinth With material sand brick etc.of size 6x6x6 sq ft for distribution Transformers.

Repairing of old damaged Plinth With material of size 6x6x6 sq ft for distribution Transformers.

removal of tranformer from damaged plinth to trolly

repairing of old plinth with material sand brick etc. as per site requirement

reinstalling of transformer kept on trolly to plinth

Fixing of 33 KV V TYPE CROSS ARM

Fixing of 33 KV Disc Insulater

Fixing of 33 KV Pin Insulater

Fixing of 11 KV V TYPE CROSS ARM

Fixing of 11 KV Pin Insulater

Fixing of 11 KV Disc Insulater

Fixing of Three Phase Distribution Box

Fixing of Battery set with charger

Providing of G.I Pipe 6 inch dia

Fixing of G.I Pipe 6 inch dia

Providing of 11 KV fuse Set Direction of Engineer incharge

Fixing of 11 KV FUSE SET

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.

Providing and Fixing of Chemical Earthing

Providing and Fixing of GI Strip for earthing regarding

Providing and installing OF MS STRIP/angle (65x65x6) sq mm for fencing long as per site required direction of Engineer incharge

Providing and installing OF MS STRIP/angle (65x65x6) sq mm for fencing as per site required direction of Engineer incharge

Providing and fixing of Water Level Earthing

Providing and fixing copper coin, copper wire with strip/hook purpose for water level earthing

Providing and fixing of HDPE Pipe for cable

Providing and fixing of Lug BRASS 250 kva

Providing and fixing of Lug BRASS 400 kva

Providing and fixing of Lug BRASS 630 kva

Providing and fixing of Lug BRASS 1000 kva

Providing and fixing of Bus bar brass

Providing and fixing of Bus bar Aluminium

Fixing of 11 KV CT 600/300/5

Fixing of 11 KV CT 400/200/1

Fixing of 11 KV PT

Fixing of 33 KV CT 400/200/1

Fixing of 33 KV CONTROL PANEL SINGLE T/F

FIXING OG 33 KV TPMO

Construction of safty wall between two power transformer at different substation with materai such as sand,brick etc. of as per site required direction of Engineer incharge

Construction of safty wall between two distribution transformer kept at same plinth at different locations with materai such as sand,brick etc. as per respo norms as per site required direction of Engineer incharge

Drilling of dia 160 mm in Two Parallel bores by trench less Method by horizantal Boring by HDD Machine .

Laying of HDPE Pipe through HDD Method Trenchless on Road.as per site required direction of Engineer incharge

Digging of Pits Of Size 4 Mtr X 4 Mtr X 1.5 Mtr. For Cable Loop

Restoration of Pit After Laying Of Cable loop

Hoisting of 33 KV 3X300 Sq mm XLPE Cable On Double Pole Structure through GI Pipe 140 MM dia 3 Mtr Long Fixed On Pole Structure Including its Jumpring Complete with Clamps Bolts and

Providing & Fixing and Interconnecting 6 Mtr. Long Pieces of HDPE Pipe shocket.

Laying And Pulling of 33 KV XLPE Cable Off size Throug HDPE Pipe

Laying of 11/33 KV cable with Making open cut method trench as per site required direction of Engineer incharge

Road Restoration kachha work

Road Restoration Pakka work

Providing of 11 KV Straight Through off size

Fixing of 11 KV Straight Through off size

Providing of 11 KV XLPE Cable Jointing Kit off size

Fixing of 11 KV XLPE Cable Jointing Kit off size

Providing of 33 KV XLPE Cable Jointing Kit off size

Fixing of 33 KV XLPE Cable Jointing Kit off size

The follwing material will be provided AND FIXING by the contractor

HOLDING CLAMP

CLAMP FOR STP POLE

F CLAMP

DANGER BOARD

Number Plate

PERCING Clamp

LT CLAMP FOR PCC POLE

SUSPENSION CLAMP FOR LT ABC

DEAD END CLAMP FOR LT ABC

NUT & BOLT

J HOOK

TF Clamps

MS CHANEL/ANGEL porpeg for site bricket/T-off

STONE PAD

XLPE CABIL SPOTING WIRE

FUSE SET ANGEL/CHANEL

Dismantling and removing of old VCB

Carrige of all dismantle material site/substation to store center BSR.

400 KVA TF TROLLEY WITH Heavy duty MS FENCING, best quality TYRE including all material as per respo/approve drawing.

Removing of old and damaged stp/pcc pole

cutting of damaged stp pole through gas cutter

removing damaged stp/pcc pole with help of hydra and carrying it to concerned substation

Saraswati Electricals & Contractors (BID ID -5490929)