Construction of new SHB at 132 kv ss Ropar

Earth work in excavation in all kinds of soil not exceeding 2.0mtr. depth i/e dressing in bottom and sides of trenches & subsequent filling around masonary in 15cm layers.

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres

Shuttering for faces of concrete foundation & foundation beams & plinth Beams (vertical or Battering)

Centering & Shuttering for columns (rect / square or polygonal in plain )

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc

Centring and shuttering for stair cases with sloping with soffits including risers and stringers.

Cement concrete 1: 8: 16 with 40 mm stone aggregate

Cement concrete 1: 8: 16 with 20 mm stone aggregate

Cement concrete 1: 6: 12 with 40 mm stone aggregate

Cement concrete 1: 5: 10 with 40mm stone aggregate

Cement concrete 1: 4: 8 with 40mm stone aggregate

Cement concrete 1: 2: 4 with stone ballast or shingle

RCC M-20 mechanically mixed,vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in fdn. And plinth

RCC M-20 mechanically mixed,vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in s/s

Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded.

Damp proof course 4 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration @ 1.65 kg per sqm laid hot and sanded

Supplying & filling dry brick bats in well

First class burnt work laid in cement sandmmortar 1:7 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

Extra for additional storey upto 4 metres above the top of structural roof of lower storey.

1st class brick work mud mortar

Extra labour for First class burnt brick masonry in well steining of circular well

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3

Providing CC Gola 1:2:4 ratio 10cm x 10cm size

Providing and Fixing ceiling consisting of 600mmX600mmX12.5mm thick Gypsum Board GI Cradling hanged from the ceiling by means of GI hanger complete as per drawings,specifications and to the entire satisfaction of engineer-in- charge.

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge.

Providing and fixing UPVC bend for rain water pipe on wooden plugs fixed on wall face including joints complete as per specifications

Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85%

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling.

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 40mm thick cement concrete topping 1:2:4.

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand)

Plinth protection of Flat brick or tile flooring laid in cement sand mortar 1;4 on 100mm thick CC 1:8:16 &100mm Th sand filling &cement pointing 1:2 on top

Anti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with white cement slurry in joints

Providing and laying vitrified floor tiles 600x600mm size premium quality,manufactured using Double charge Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement Mortar 1:4 for new flooring laid with cement based high polymer modified quick set tile adhesive of approved make IS 15477 marked using 5Kg adhesive per sqm of tile area in average 3mm thickness over existing base etc., complete

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3

White glazed tiles 20 cm x 30 cm and 5 mm thick in skirting and dado on 12 mm thick cement plaster 1:4 in base an joined with white cement slurry in joints

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt

Providing & laying 80mm factory made cement conc interlocking paver block of M-40 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in ordinary grey colour and pattern over and i/c 50mm thick compacted bed of coarse sand filling the joints with fine sand etc all complete

Baroda Green Marble flooring 15mm to 20mm thick over 12.5mm thick base of Cement mortar 1:3 lid and jointed with white cement slurry with pigment to mater the shade of marrble including rubbing & Polishing Tile Size 45 Cm X 60Cm & above

Bearing plaster 10mm 1:4

12.5 m thick Cement plaster 1:3

12.5 mm thick cement plaster 1:4

12.5 mm thick cement plaster 1:5

20mm th. CP 1:3 on wall top

20mm Cement Plaster 1:4 ratio

20mm Cement Plaster 1:5 ratio

Extra for providing and mixing water proofing material in cement plaster work @ 1 kg per 50 kg of cement

20 mm th. Vertical DPC of CP 1:3 with 2-coats of hot bitumen

Painting 2 coats of aluminium paint + priming coat

Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work

Painting one coat with readymixed paint of metallic surfaces in all shades on old steel or iron work

Painting two or more coats with aluminum paint to give an even shade excluding priming coat

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.43 litre/10sqm over and including base coat of water proofing Cement Paint applied

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Painting with acid proof paint of approved brand and manufacture to give an even shadetwo or more coats

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded For fixed portion and chaukhats

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded For shutters of doors, windows &

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded

Providing and fixing glazing in aluminium door 5mm thick glass, window, ventilator shutters and partitions etc.

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make, Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS :6315 marked, for doors including cost of cutting

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000mm)

Powder coating to all aluminium sections

Cold twisted deformed (ribbed/ tor steel) Bars, for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.

Laying MS Strip of required size 100x12

Steel work in flat etc. for cable racks of MS Flat 75x6mm

Structural steel work in angles.tees,flats etc rivetted or welded in/c cutting fixing all gusset plates bolts, nuts complete with hoisting for roof trusses

Welding by gas or by electric plant, including carriage to and from workshop etc.

P&F MS stair case railing made out of MS sq bar 20mmx20mm as vertical post 0.70mm high fixed with MS base plate of 40x40mmx6mm & flat iron 40x6mm as hand rail complete in all respect

Compacting original ground below road crust Loosening, leveling and compacting original ground up to a level of 500mm below road crust, mixed with water at OMC, levelled, graded and compacted in layers by rolling so as to achieve minimum dry density as given in Table 300-2 for sub grade construction as per technical clause 305 of MORT&H specifications

Water Bound Macadam Grading II -Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications

Compaction Extra for rolling to specifications

Providing and laying factory made smooth finish Precast cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing nmwith cement mortar 1:2 as per MORT&H specifications

P/L factory made rubber moulded smooth finish cement concrete channel M-20 grade 300mm wide and75mm thick made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specification

Providing and filling joint sealing compound with coarse sand and 6 percent bitumen by weight complete as per drawings

Boring with 150mm dia casing pipe for tube well in all kinds of soilsexcept ordinary hard rocks requiring blasting including removind the casing pipe after the hand pipe/tube well is lowered and tested Upto150mtr. Depth below G.L.

Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect

supplying,assembling,lowering and fixing in vertical position in bore well unplasticized PVC medium wellscreen RMS pipe 125mm o/dia

P/F foot rest for well shaft made of 20x20mm square bars i/c fixing in man hole/well shaft

Providing & fixing RCC manhole cover light weight

P/F manhole cover 500 dia with frame

P & F CI pipe 75mm dia

P& F of HCI gratings 150mmx150mm

P/F CI cowl 75mm dia

Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (two module).

Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (two module).

Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

Wiring call bell point

Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade

Wiring 3 pin 16/20 amp. power plug control and switch.

PVC insulated copper conductor single core cable (ISI marked) overall 1.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade

PVC insulated copper conductor single core cable (ISI marked) overall 6 sq.mm, 1100volts grade twin core

Heavy gauge welded conduit pipe 25mm dia. (ISI marked 1.60mm thick) Flushed

Heavy gauge welded conduit pipe 32mm dia. (ISI marked 1.60mm thick) On Surface

S&E of pipe for wiring purpose inc.bends inspection boxes etc. where necessary in 25 mm heavy duty pipe

Miniature circuit breaker single pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Miniature circuit breaker double pole 50, 63amp. (Breaking capacity 10kA, Curve-C)suitable for 240/ 415 volts 50cycles AC supply

Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's, 12 way each

P & F of corrotive resistance (Acid vapour proof) completely enclosed type white stove enameled reflector fitting suitable for 2 Nos. 4’x40 walts flourscent tube the canopy made of fibres glass and bottom covered with clear transparent acrylic sheet of crompton Greaves/ Philips India/ Bajaj/Genelac i/c the catalogue No. type of the manfacture.

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete. 15mm1/2”dia G.I. pipe

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete. 20mm 3/4” dia G.I. pipe

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete. 25mm 3/4” dia G.I. pipe

Providing, fixing and jointing Union Couplings in G.I. Pipe lines. i)1/2” dia (15mm) i/d pipe line

Providing, fixing and jointing Union Couplings in G.I. Pipe lines. ii)3/4” dia (20mm) i/d pipe line

20mm i/d Gun Metal peet valve heavy pattern.

Provo/ding, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on G.I. Pipe lines laid in the or inside buildings including all carriages complete. 25mm i/d Gun Metal peet valve heavy pattern.

Providing & fixing Cast Iron suface box for Peet Valve, Stop Cock including all carriages complete.

Cutting holes upto 23cm square thorugh B.B. in cement walls for pipes, and making goo/d including repointing, replastering and finishing according to existing finish where required through wall 22.86 cm thick

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects 110 mm o/d

Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required Through floor or roof 15.00cm thick

Excavation in open cutting or in streets and lanes for intramural sullage drains, extramural intercepting drains and outfall drains above top of drains cunnetes, storm ater channels and other work contingent or incident thereto, to full dimensions and depth as shown on the drawings or as shall be required by Engineer-in-charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic, Providing and fixing and maintenance of ution boards, night signals, crossing over trenches for access to the houses, watching etc. and of removal of surplus spoil from the site of work including all lift and lead for depths to 2 metre below natural ground level upto 60 metres of length of lead in disposing surplus spoil. All classes of soil except rocky

Earth work in excavation in Foundations Trenches etc., for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, creening chambers and other similar works to full dimension and depth as shown on the drawings or as shall be required by Engineerin-charge, including dressing of ottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around Plinth/structures in 15 cms. layers with compaction including Disposal of surplus spoils as Directed within a lead of 30 Metres. For all classes of soil except rocky.

Providing & fixing 560mm, 500mm and 450mm internal Diametre circular or 455 mm x 610mm clear inside opening rectangular cast iron manhole cover and frame ISI marked as per IS12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines and levels in 1:2 cement sand mortar over manholes including cement concrete copping (1:2:4)around the frame etc.Dia of steel for lifting hook is 16mm. R.C.C. Manhole cover 500mm i/d Heavy duty

R.C.C. Manhole cover Light duty Rectangular single/double seal pattern 450mm x 450mm clear inside opening

Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal

Extra for every 0.30 m depth of inspection chamber. 450mm x 450mm

Providing and fixing in position Chinaware Indian Orisa water closet sizes 580mm (to the approval of the Engineer-in-charge) suiteconsisting of 10 ltr. PVC flushing istern supported on angle iron bracket including cost of long bend 32 mm dia complete in all respect and to the entire satisfaction of engineer in charge.

P & F in position Chinaware Europeon type water closet P-trap or S-trap ( to be approved of the Engineer Incharge) suit consisting of 10 ltr PVC flushing cistern supported on angles iron brackets,short bend 32 mm dia i/c cost of solied white cover complete in all respect & to the entire satisfaction of engineer in charge

Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.

Extra for providing and fixing C.P. Brass short flush bend 32mm instead of PVC short bend.

Providing & fixing in position best Indian make (to be approval of the Engineer-incharge) vitreous Chinware white flat back or angular lipped front urinal size 440 x 315 x265 mm C.P. brass flexible tube connection 450 mm long.

Extra for providing & fixing PVC 32 mm dia waste pipe up to floor level & plumbing joints

Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.Size 550 mm x 400 mm x 815 mm

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall 2.8 mm thick upto floor level including cost of wipped solder joint etc. complete as required by the Engineer in charge.

Providing and fixing in position best Indian make chromium plated brass, Bottle trap 32mm dia with 40 mm seal of approved make(to the approval of Engineer Incharge) complete in all respect.

Providing and fixing in position best quality stainless steel sinks with complete fitting Size 600 mm x 450 mm x 225 mm (Net size excluding flat edge)

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass rews, complete in all respects including cutting and making good the walls etc. C.P. brass towel Rails size 20mm dia 600mm long cp Acrylic

Providing and fixing in position glass shelf fixed in with rawl plugs with C.P brass screws complete ncluding cutting and making good the walls etc. C.P. brass Acrylic shelf size 560x130mm

Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick hardboard sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plugs embedded in the walls or chromium plated brass clamps with C.P. rass screws (as required by the Engineer-in- Charge) complete including cutting and making good the walls etc. Size 600mmx450mm

Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge). C.P. brass Bib cock

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-incharge). C.P.brass 15mm stop cock Male and female

PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.. 110 mm o/d of pipe 6 kgf./sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.. 75 mmo/d pipe of 6 kgf./ sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.. 110 mm o/d of pipe 4 kgf./sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications..75 mmo/d pipe of 4 kgf./ sqcm

Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge 110mm o/d

Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge 75mm o/d

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining 75 mm o/d pipe elbow 90 degree

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining110 mm o/d pipe elbow 90 degree

Nahani trap without jali 110mmx110mm

Nahani trap without jali 110mmx75mm

Vent Cowls 110 mm

Coupler (socket) 110 mm

Coupler (socket) 75 mm

Providing & fixing in position HDPE water storage tanks triple layer make as approves by Engineer-in-Charge including hosting and carriage from store to site of work complete with providing and fixing 15mm or 20mm internal Diametre tanki nipple complete.(Excluding cost of platform). Triple layer tank

100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

Landing Rate of materials including extra carriage and difference of rates of Coarse Sand

Extra carriage of Fine Sand

Extra carriage of Cement

Extra carriage of Steel

Landing Rate of materials including extra carriage and difference of rates of Bricks

Landing Rate of materials including extra carriage and difference of rates of Crushed bajri12/13.2mm

Landing Rate of materials including extra carriage and difference of rates of Crushed bajri10/11.2mm

Landing Rate of materials including extra carriage and difference of rates of S.Metal

Landing Rate including Extra carriage and Difference of rate of Stone ballast

Earth filling including watering & compaction as per specification

P & F of 20 Watt Tube set LED type Havells Make

P & F ceiling fans standard make 1400mm sweep with regulator . Bajaj ,Crompton/G.E.C./ Philips/ GEC/Khaitan make.

P & F of 18” dia 1440 RPM single phase Exhaust fan with louvers of make Crompton Greaves /Philips India/ Bajaj /Genelac/ Khaitan as per Technical specification No. 20. The contractor should specify the make.

P & F of 12” dia 1440 RPM single phase Exhaust fan with louvers of make Crompton Greaves /Philips India/ Bajaj /Genelac/ Khaitan as per Technical specification No. 20. The contractor should specify the make.

Supply & Fixing 15 Watt Panel Trim Havells round downliter LED type

Supply & Fixing ceiling light of 42 watt 2' x 2' fitting Havells make of LED type

S & F general purpose tube fittings of crompton make on wall (ModelDIJB12414EB9) of 1x36 W

Prov./Fixing 200 watt gate light posts/ lantern of Crompton Greeves / Bajaj/Equivalent

P/F angle iron posts

P/F barbed wire fencing consisting of galvanized steel barbed wire having dia 2.24mm(2ply) brbed with 4 points complete in 4 row all respects as per drwg.

P/F G.I wire netting mesh of 12 gauge 50x50 mesh 180cms high fastened with 4 nos. M.S wire rope complete in all respects as per drawing

S&F steel gate G-2A ( 5.8 mts) as per drg. No 4, JOB-S/ARCH.-68

P/F GI sheet of TATA make Durashine complete as pr specifecations

P/F of U/C fencing gate 1m wide for station T/F

Providing & Fixing wire mesh of 22 Guage 12mm x 12mm in aluminium door & Windows

Fixing of templates along with fdn. Bolts as per drawing

S/F of ferro-cement trench cover of 3' 4" x 1' 6"

P/f ferro trench cover of size 1000x460

P/f ferro trench cover of size 0.810 mt x 0.450 mt

S/H/Placiing of Ferro-cement trench cover,frame of size given below made of MS flat 50 x 3 mm with 6 mm dia bars at 4.5" & 9' welded to flat with lifting hooks as per Drg.No CW/DS-2537-R/5 & CE /DS-2420-R/3 complete Trench-T-4 Size 2'-6" x 1'-9"

P&F of various size cable racks 40x40x5

P&F of various size cable racks 40x40x6

P/F angle nosing of MS angle 50x50x3 mm

P/F of MS cable racks of M/s flat 75x6mm '@3.54kg / mt

MCB Triple pole 0.5 to 4 amp

P/F steel nosing made of angle 30x30x3 mm with MS flat 15x4mm and 6mm dia bar

P/F MS checqured plate 5mm thick

Recovery of trees

Please Enable Macros to View BoQ information