WORK OF PROVDING REPAIR & CONSTRUCTION OF SSM WALL TO FLOW METER INLET/OUTLET CHAMBERS WITH FABRICATION OF MS STRUCTURE AND OTHER ALLIED WORKS AT DIFFERENT LOCATIONS UNDER AEEUFW 2 SUBDIVISION

WORK OF PROVDING REPAIR & CONSTRUCTION OF SSM WALL TO FLOW METER INLET/OUTLET CHAMBERS WITH FABRICATION OF MS STRUCTURE AND OTHER ALLIED WORKS AT DIFFERENT LOCATIONS UNDER AEEUFW 2 SUBDIVISION

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Depth exceeding 1.5 m, but not exceeding 3 m

Depth exceeding 3.0 m, but not exceeding 4.50 m

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for leveling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fin e aggregates as per relevant IS Codes...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Solid Concrete Bricks of size 225x100x75mm having strength 5Mpa & above for superstructure above plinth level in all shapes and sizes with Cement mortar 1:4 (1 cement : 4 coarse sand) includ...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Shifting of transmitter Panel with all points accessories from one location to other location as per direction of Engineer in charge.

Dewatering Pump 10HP

Generator 33KVA