INSTALLATION OF SOLAR WATER SYSTEM WITH OVERHEAD TANK AT TURIVITA WITHIN BAWKALI SANSAD CONSTITUNCY IN HATMURI GRAM PANCHYAT UNDER 15TH F.C TIED 2025-26. Activity ID-130891009

1000litre capacity TANK-1000 L supplying P.V.C, water storage tank of approved quality with closed top with lid (Green) - Multilayer.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Labour for laying 150 mm to 200mm boulder soling including rough dressing hand packing and ramming down small pieces in the Interst ics wihout rolling but including ramming and preparing the bed to proper I evel and filling up all joints with sandy clay or earth. NB. This rat e only for Northern Circle, NBCC-1 & NBCC-

Hire and labour charges for shuttering with centeringand necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without stagingin foundation

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface], 15mm thick with CM (1:6),

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe, etc. and fitting and fixing the same complete including bucket washing and other incidental works In the connection. The tube well should have a minimum 80 mm gap in between the outside of the tube well pipe and the bore. (d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia.

Supply of PVC pipes & fittings Schedule 80 (medium duly) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS: 1239 (Part 1).1) 100 mm dia PVC (ASTMD)

Supply of PVC pipes & fittings Schedule 80 (medium duly) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS: 1239 (Part 1).2) 32 mm dia PVC (ASTMD)

Supply of PVC pipes & fittings Schedule 80 (medium duly) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS: 1239 (Part 1).3) 25 mm dia PVC (ASTMD)