REPAIR AND MAINT TO WALL PANELLING, ALUMINIUM JOINERIES AT HQ CIF (K) UNDER AGE (I) CIF (K).

Amount

Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling timber scantling 40 Sq cm and over in section in any position, framed work, complete all as specified and as directed by the Engineer-in-Charge..

2nd class soft wood (Kail) as in scantling, clean sawn timber, fixed in framed work, complete all as specified and as directed by the Engineer-in-Charge.

8mm thick laminated wooden wall panelling interlocking type fixed with nails to timber frame work, complete all as specified and as directed by the Engineer-in-Charge. Note : The pattern and colour of panelling shall be approved by AGE (I) and contractor shall not have any claim whatsoever on this account.

Plain fillets of 2nd class soft wood, square, rectangular or triangular in section, bullnosed, splayed, chamfered or rounded on one edge or face, secured with nails or brads of sectional area exceeding 13 and not exceeding 25 sq.cm, complete all as specified and directed by the Engineer-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) , complete all as specified and directed by the Engineer-in-Charge.

Anodised aluminium powder coating (Thickness of powder coating not less than 50 microns) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified., complete all as specified and directed by the Engineer-in-Charge.

Anodised aluminium window andventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and directed by the Engineer-in-Charge.

Anodised aluminium window andventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed by the Engineer-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified., complete all as specified and directed by the Engineer-in-Charge.

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and directed by the Engineer-in-Charge.

Sheet glass 4mm thick ordinary quality and glazing with in aluminium frame including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screwa, anodised aluminium fittings as required in squares not exc. 0.5 Sqm in each pane, complete all as specified as directed by the Engineer-in-Charge.

Printed PVC sheet 5mm thick in strips and channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site, complete all as specified and directed by the Engineer-in-Charge.

Note :- An amount of Rs. 16,850.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S MIR SAJAD ENTERPRISES

M/S A Q ENTERPRISES

M/S ESS EMM ENTERPRISES