Improvement to Airmen Recreation room and Bar at AF Stn Mamaura

Amount

M & L for Glazed ceramic coloured designer tiles of stone/brick pattern, light/dark shade as approved by Engineer-in-Charge for wall cladding as in skirting/dado of size 300 x 600 mm and 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for Vitrified Ceramic coloured designer tiles, light/dark shade (as approved by Engr-in-charge), 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed.

M & L for granite (of any type) tiles/slab, 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

S&F bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle ,screwed down screwed for iron pipe or for brass ferrule and fixed 15mm complete all as specified.

Taking down chowkats from frame (without taking off shutters from frame) exc 1.50 sqm but n.exc 4.00 sqm each and removal to store complete all as specified and directed.

S&F for aluminium windows sliding type powder coated of approved colour with frame made up of three track standard aluminium channel section of size 92x29.5x1.00mm thick and shutters made up of 50x20mmx1.5mm thick section sliding type including 5 mm thick plain glass and 0.46mm dia and 1.18mm aperture stainless steel wire mess, including rubber gasket, aluminium locking handle, aluminium snap beading and jointing cleats for fixing etc, including aluminium deco grills fixed complete all as specified and directed.

M&L for forming jambs, etc to openings, including cutting toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar 1:4 complete all as specified and as directed.

M&L for making good ( in cement mortar 1:4) under cills or over arches, lintels or bressumers including all pinning when necessary complete all as specified and as directed.

Supply and fixing for curtain rods 28 mm dia MS conduit pipe with PVC coated, with powder coated brackets and PVC end knobs (phenol) bright colour polished, fixed over doors/windows complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

S & F for flush shutters, 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F butt hinges, 100 mm, stainless steel, with stainless steel hinge pin, bright polished and fixed complete all as specified and directed.

S & F for aluminium anodised, barrel tower bolts, 150 mm of extruded section and fixed complete all as specified and directed.

S & F for extruded aluminium alloy handles, fabricated type, anodised fixed complete all as specified and directed.

Supply and fixing of single side prelaminated (coloured) PVC sheet fixed or laid on to flush doors by using rubber based adhesive, with PVC sheet heat bent as lipping on the edges of doors as per specification complete all as specified and directed.

Supply and fixing for solid PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed colour PVC sheet reinforced with M.S. Square tube, fixing in opening of cupboards as per specification complete all as specified and directed.

Supply and fixing for factory made solid PVC moulded door shutter as in cupboards, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick Moulded Prelaminated PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing for continuous (piano) hinges, of brass, width of flap (when open) 30 mm, fixed complete all as specified and directed.

S & F for brass handles, cast type, polished bright, 75 mm fixed complete all as specified and directed.

S & F for Mortice lock, brass, 2 levers, size 65 mm, vertical type, fixed complete all as specified and directed.

M & L for grinding, polishing and half rounding off edges of granite/kotastone, any type

Dismantling of aluminium partion including partition boards carefully and refixing/shifting of whole aluminium partion and partion boards with screws in another place in the same room and making good to the original condition after shifting of the aluminium partion along with boards/frames etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 15 mm thick cement screed bed in CM 1:6 including rubbing and mirror polishing complete all as specified and directed.

M & L for 75 mm thick PCC 1:4:8 type-D2 (using 40 mm graded stone aggregate) as in sub base of floor finished fair and even complete all as specified and directed.

M & L for hardcore of broken stone/ boulders broken to guage n.exc 65mm, laid complete all as specified and directed.

M & L for 1 to 3 mm thick wall care putty (Birla Putty) on walls including preparation of surface by scrapping and complete removal of existing treatement, washing down and preparation of newly plastered surfaces etc finished even and smooth complete all as specified and directed.

Taking down cement plaster built in cement mortar complete all as specified and directed.

M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even without using extra cement complete all as specified and directed.

M & L for applying two coat of distemper oil emulsion over a coat of primer including preparation of newly plastered surface and other surface of walls complete all as specified and directed.

Dismantling of GI pipes, any size, embedded on walls and removal to store and making good the disturbed wall surface with plaster and putty finished even and smooth complete all as specified and directed.

M & L for brick work using sub class 'B' bricks, straight or curved on plan exc. 6 M mean radius built C.M. 1:6 all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

M&L RCC 1:2:4 type B-1 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) rough finished surfaces of concrete flat all as specified.

M&L form work to edges of concrete flats such as roofs exc 10cm but, n exc 20 cm wide horizontal or slopping and similar work for rough finished surface of concrete complete all as specified and as directed.

M&L for applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm on concrete or plastered surface to make the surfaces water proof complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps including dismantling of old pipe of any descrption complete all as directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and with concealed in wall pressed steel terminal boxes not less that 1.6mm thick of suitable size duly inside and outside painted with two coats of synthetic enamel paint over one coat of red oxide primer, covered with 3 mm thick phenolic laminated white sheet cover with Neutral & earth continuty bus bar for mounting switches, sockets, fan regulators, complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

S&F Decorative light wall mounting,brushed nickel finish fixture with opal glass diffuser suitable for 4 W candle/A45 LED filament lamp E14 base and connection wire twin core of suitable size from nearest source etc. Make:- Havells cat part No.LHFOAKC1TZ1I040 / Philips / CG / Wipro .

Supply and fix fans energy models ceiling complete without regulator and complete acessories 230 V,1200 mm sweep BEE 5 star rated.complete all as specified and directed.

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.6 mm covered with 3 mm thick phenolic laminated white sheet cover complete for one 16 amp socket outlet controlled by one switch on independent board.

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black, Earth - Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.12 mm covered with 3 mm thick phenolic laminated white sheet cover complete for one 20 amp metal clad socket outlet independent board.

Supplying and fixing switch piano flush button single pole one way 6 amp complete all as specified and as directed..

Supplying and fixing switch piano flush button single pole one way 16 amp complete all as specified and as directed..

Supplying and fixing socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and as directed.

Supplying and fixing hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and as directed..

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and as directed..

Supplying and fixing powder coated, CRCA steel sheet MCB distribution board (minimum thickness 1.2 mm & constructed as per IS : 8623), degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required of SPN, 240 volts, 8 ways. complete all as specified and as directed..

Supplying and fixing as per load requirement 'C' series MCBs of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

SPN,240 Volts 32 amp.

Single pole 5 to 32 amp.

Material and labour for submain wiring in repairs, alongwith earth continuity conductor with PVC insulated FRLS multistrand copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked with all conduit accessories of f2x4 sq mm + 1x4.0 sq mm (earth) in 20 mm dia conduit.

S&F 20 Amps single pole and neutral industrial type socket with 2 pole and earth metal enclosed plug top in powder coated in CRCA steel sheet enclosure recess mounted with chained metal cover for the soket outlet with and including 01 No single pole C,series MCb 20/32 Amp as required Make Legrand /L&T hager HPL/ Havells .

M/s sahaj enterprises

M/S ALOK SRIVASTAVA

m/s pal associates