Dismantling,Overhauling and Erection Of VT Pump Of DC-1 & DC-2 and Supplying Of Necessary Spares ,Testing and Calibration Of Electro-Mechanical System at ARBC & TLIS Headwork

Dismantling,Overhauling and Erection Of VT Pump Of DC-1 & DC-2 and Supplying Of Necessary Spares ,Testing and Calibration Of Electro-Mechanical System at ARBC & TLIS Headwork

Dismantling, identification of deteriorated spares, replacement of requisite spares if necessary, rectifying friction between shaft and bearing inside VT pumps, cleaning of bearing, conducting dynami...

Dismantling, identification of deteriorated spares, replacement of requisite spares if necessary, rectifying friction between shaft and bearing inside VT pumps, cleaning of bearing, conducting dynami...

Supplying of HRC Fuse for Capacitor Panel 7.2kv/71A for at ARBC& TLIS HW and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of line Shaft sleeve of part no 312-558 & make/code ST ST ASTMA 276-410 340 BHN(GLAND PACKING) and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Shaft sleeve of part no 316.1-558 & make/code ST ST ASTMA 276-410 340 BHN( top Ball Shaft sleve) and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Shaft sleeve of part no 316.2-558 & make/code ST ST ASTMA 276-410 340 BHN ( bottom Ball Shaft sleve) and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Shaft sleeve (Stuffing box shaft sleeve) of part no 310-558 & make/code ST ST ASTMA 276-410 340 BHN and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Gland packing of part no 430-345 & make/code CHAMPION 1094 (TIWA) and as directed by Engineer-In-Charge, complete with all leads and lifts.

Split Ring part no 253 & make/code ST ST ASTMA 276-410 ANLD and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Trans/Thordan Bearing of part no 357-391 & make/code Thordan BRG and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Thordan Bearing of part no 354.1-391 & make/code Thordan BRG(Bowl Bearing) and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Thordan Bearing of part no 354.2-391 & make/code Thordan BRG (Bowl throden Bearing) and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Thordan Bearing of part no 353-391 & make/code Thordan BRG (Bell mouth bearing) and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Thordan Bearing of part no 352.1-391 & make/code Thordan BRG (Stuffing box thorden bearing) and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Set of O-ring for pump and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of spring washer ss 30 x 5mm thick and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Cooling Coil 370-257 and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of oil Level Indlcator and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Temperature Indlcator and as directed by Engineer-In-Charge, complete with all leads and lifts.

Repair Incluing of Materials. and Fabricated of Strainer-502 and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Rubber bush (Coupling) of part no 400 and as directed by Engineer-In-Charge, complete with all leads and lifts.

Supply of Nut, Bolt & Washer (M30 x 150mm) SS-410 and as directed by Engineer-In-Charge, complete with all leads and lifts.

Wiring Testing & Commissioning of 6.3 MVA, 33/6.6 kV at Timmapur LIS headwork and 7.2 MVA, 33/6.6 KV at ARBC headwork Power Transformers Ratio Test, SC test, Excitation test, Magnetic Balance test, Ve...

Wiring: Identification of 6.3 MVA, 33/6.6 kV at Timmapur LIS headwork and 7.2 MVA, 33/6.6 KV at ARBC headwork Power Transformers wires, Ferruling crimping and termination of wires. Wiring of Protec...

Testing and Calibration of 33KV SF - 6 Breakers at Timmapur LIS headwork and ARBC headwork :Breaker erection, assembly, alignment & interpole wiring of breakers with its connected equipment including ...

Testing and Calibration of 33KV SF - 6 Breakers at Timmapur LIS headwork and ARBC headwork :Wiring:Identification, ferruling, crimping and termination of wires in Breaker limbs, marshalling box & wiri...

TESTING OF CTS of 33KV Current Transformer : Wiring : Identification of wires,Ferruling,Crimping of lugs,Connections up to marshaling box and control panel,Insulation,Polarity, Ratio, Excitation at ...

TESTING OF CTS & PTS of 33KV Current Transformer : Testing and Commissioning of CT: Insulation resistance, polarity,

ratio, excitation, Core identification, tan-delta & capacitance test. at Timmapu...

Test & Commissioning: Control and Relay Panels of 33KV/6.6 kv Transformers Wiring:Identification, Ferruling, Crimping, termination of wires in C&R panels at Timmapur LIS headwork and ARBC headwork and...

Test & Commissioning: Control and Relay Panels of 33KV /6.6 kv Transformers Testing: Testing for insulation level, Testing of relays, control operations for closing tripping etc., interlocks Alarm, An...

Testing and Calibration of feeder panel & incomer panel at Timmapur LIS headwork and ARBC headwork Testing & Commissioning Test for insulation level/IR value, gas leakage, testing for travel time (C, ...

TESTING OF feeder panel and incomer panel (ALL HT& LT ) PANEL Testing Assisting in Testing

Testing & Commissioning: 33/6.6 KV panel indoor (Capacitor Bank with reactors)and as directed by Engineer-In-Charge, complete with all leads and lifts.