Construction of Sports Stadium in village Sewah Distt. Panipat (Providing Estate Electrical services, Compact Substation and DG set).

Amount

21.84.1 Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping

20.62.1 Providing, lowering, laying, cutting (cut surface to be uniformly finished), jointing with rubber rings marked with IS : 5382 and testing of SPIGOT AND SOCKETTED RCC, NP2 MARKED WITH IS : 458-1988 and specials into trenches for all depths including carriage, loading, unloading, stacking, handling, re-handling etc. complete is all respects to the satisfaction to the Engineer - in -charge. 200mm i/d

23.5.6 Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm)

23.22.1.9 Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA

23.22.1.11 4 pole MCCB 200 to 250 amp, 25 KA

23.22.2.1 MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP

23.22.3.2 Supply and erection of sheet steel enclosures 1 pole/2 pole/4 pole on walVon existing pedestal complete as required. S.P.N. or DP enclosure suitable for DP MCB

23.22.4 Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. 23.22.4.1 SPN DB Double Door 4 way ( 2 incoming and 2 outgoing).

23.22.4.5 TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing)

23.22.4.7 TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing)

23.22.4.8 TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing)

23.22.5 Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 23.22.5.3 6 amp. to 32 amp Double POLE

23.22.5.5 6 amp. to 32 amp MCB's TRIPLE POLE

23.22.6 Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. 23.22.6.1 DP RCCB 30ma sensitivity , 25 A

23.22.7 Supply and erection of blanking sheet in existing distribution board.

23.23.1.2 Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- Size 20 mm dia

23.26.1 Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages

23.26.2 Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages

23.26.4 Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6'x4' made of GI pipe 32mm dia).

23.27 Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1 :2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineerin-charge of the work:- 23.27.1 M.S. pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in 1 :2:4 cement concrete block of size 750 mm x 450 mm x 200 mm above ground level , having a base of size 900 mm x 600 mm x 250 mm below ground level

23.27.2 M.S. pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level

23.27.6 M.S. pedestal of size 1500 mm wide , 1800 mm high ,450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1650 mm x 600 mm x 200 mm above ground level , having a base of size 1 BOO mm x 750 mm x 250 mm below ground level

24.1.1 Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required

24.1.2 Extra for using salt and char coal/coke for pipe earth electrode as required

24.1.3 Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required

24.1.4 Earthing with tinned copper earth plate 6D0mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required

24.1.5 Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode

24.1.8 Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material

24.1.10 Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material

24.2.7 Supply and erection of suitable compression type brass cable glands for underground Cable 24.2.7.2) 1O sqmm to 16s qmm Cable 2 to 4 Core

24.2.7.3) 25 sqmm to 50 sqmm Cable 2 to 4 Core

24.2.7.4) 70 sqmm to 95 sqmm Cable 3 to 3½ Core

24.2.7.5) 120 sqmm to 185 sqmm Cable 3 to 3½ Core

24.2.8 Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work 24.2.8.3 (10sqmm).

24.2.10 Supply and erection of cable route marker made of 50 cm long 1 O mm dia M.S. Rod welded/riveted at the top with 1 O cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level

24.3.3.1 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 70 to 120 sqmm

24.3.4.1 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 70 to 120 sqmm

24.5.2 S/E mark double walled corrugated (DWC) HOPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. 24.5.2.2 DWC/HOPE pipe 50/40 mm outer dial inner dia

24.5.2.6 DWC/HOPE pipe 145/123 mm outer dial inner dia

24.7 RCC FOUNDATIONS FOR DG SET Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1 .Bx1 .Om)

24.7.3 100 KVA DG Set

25.1.2 Supplying, fixing, testing and commissioning of condenser water pipes/ non insulated chilled water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect 250 mm dia

NS items Supply and erection of under ground Armoured cable loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab / Grandlay 10 Sq. mm 2 Core Cable .

16 Sq. mm 4 Core Cable .

25 Sq. mm 4 Core Cable .

35 Sq. mm 4 Core Cable .

50 Sq. mm 3.5 Core Cable .

95 Sq. mm 3.5 Core Cable .

185 Sq. mm 3.5 Core Cable .

Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 Kg. burried 1.80 m in ground. (As per UHBVNL specification and make) including Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1 :3:6) layer on top with including excavation and refilling etc as required (As per HSR 24.4.10.4.) Above 8.0 metre and up to 11.0 metre.

S/E of XLPE (E)11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work including Laying and erection of XLPE II or 33 kv HT aluminium conductor armoured cable ISi mark laid on surface/ pipe/cable tray with all labour and material as required up to 120 sqmm 3 core XLPE Cable (As per HSR 24.3.2.1 Make RR / Havells / Polycab. 70 sqmm 3 core XLPE Cable

S/I/T/C of DG exhaust pipe sport structure made of Angle iron 100x50x6 duly groted in RCC foundation (the design of structure will be got approved from structure design consultant before fabrication / installation) Complete structure duly painted in all respect including cost of foundation and erection Make Tata / SAIL / Rathi.

S/I/T/C of SS bellow for DG exhaust system 200 mm dia complete with necessary inlet and outlet connection duly sealed complete in all respect.

Supply & Erection of rubber mat of size 1Mx2 M X 12mm thick suitable for 11 KV ISI marked complete in all respect upto the entire satisfaction of the engineer In-charge of the work.

Supply & erection of fire extinguisher ISI marked Co 2 type 4.5 Kg. Capacity as Per ISI 7285 duly erected on wall with hook including the cost of hook, screw etc. with all the labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer In charge of the work. Make: Ajay, Zenith, Minimax / Victor.

Supply & Erection of fire buckets of 9 ltr. capacity made out of 24guage G.l sheet and duly painted with one coat of red oxide and 2 coats of approved paint in red colour and written with the fire' as per fire protection necessar sand filling in the bucket hung the bucket on stand with all labour and material required to complete the job all respect up to entire \satisfaction of the Engineer m charge of the work

Supply and erection of ACSR conductor (ISI Marked) with accessories including stringing and sagging of conductor of various sizes as well as jointing and binding with insulator at support complete in all respect up to entire satisfaction of Engineer-in-charge of the work. (As per UHBVNL make and specification) ACSR Cond. 50 Sqmm

Supply, stringing and sagging of GSL wire 8 SWG complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work (As per UHBVNL make and specification)

Supply and erection of MS channel 100x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge (As per UHBVNL make and specification).

Supply and erection of MS angle 50x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (As per UHBVNL make and specification).

Supply and erection of MS flat 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (As per UHBVNL make and specification)

Providing and fixing of Nut & Bolt of size as per ISI specification of Engineer-in-charge. (As per UHBVNL make and specification)

Providing & fixing of stay set complete in all respect upto the entire satisfaction of Engineer-in-Charge (As per UHBVNL make and specification).

Supply and erections of V-shape X-arm on PCC poles as per state electricity Nigam design and requirement it should be made out of MS channel size 100x50mm 13.200 Kg complete in all respect (As per UHBVNL make and specification).

Supply & erection of 11KV GI pin insulator with pin Rashtriya / Jayshree / BHEL make with pin with all labour and material required to the complete the job included the fixing the same on existing channels up to entire satisfaction of the Engineer-in-Charge of the works (As per UHBVNL make and specification).

Supply & erection of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H'pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the work (As per UHBVNL make and specification).

Supply Erection Testing & Commissioning of 11kV indoor HT metering panel indoor / outdoor complete with C.Ts P.Ts Cubical .as per requirement / approved by DHBVNL consisting of the following. - Cubical panel free standing floor mounting type made out of sheet steel 16 SWG CRCA sheet with channel iron base frame spray painted with strong synthetic light grey enamel paint as per size and design approved by the DHBVNL. - 3 Nos. 11KV CTS of rating as approved by DHBVNL for indoor installation of approved make of DHBVNL. - 1 Nos. 11KVPTS 11000/10 VA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of UHBVNL. The cubical panel will be completed in all respect including inter connection, internal wiring with PVC copper cable, modem & allied accessries its testing and approval of all item by DHBVNL cost of all testing/ approval charges or all items of DHBVNL with a guarantee of one year from the date of commissioning. including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work

Supply & Erection of Digital Electronic Meter 3 phase 4 wires 0.5 accuracy for recording reading in KWH of make and rating approved by DHBVNL with push button display operating system for different kind of readingssuitable for dual metering including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work.

Providing and fixing of wire mesh jali around the transformer of size 4’ x 8’ made out of 75x25x3.25mm jali fixed with angle iron frame made out of M.S Angle 50 x 50 x 6 mm support of M.S flat 50 x 6mm and fixed in C.C block 1:2:4 including cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer in charge

Supply of Disc insulator Rashtriya / Jayshree / BHEL make with Disc fitting T&C type complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work

Providing and fixing of 11 KV oil cooled CT/PT combined unit ratio 40/5 A.C 0.5 (5) VA 5 and PT ratio 11/110 volt AC 0.5 VA / 0 along with metering cubical etc. fixing on H. pole metering cubical wiring with plate form required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work as per approved make of UHBVNL for dual metering.

Supply, installation, testing and commissioning of 30 Mtr. Long Sports Mast manufactured from B.S.E.N 10025 or equivalent grade material in, 3 (three) section hot dip, galvanized inside and outside in single dip, The mast sections shall be manufactured from M.S. sheets conforming to BSEN 10025, S355 J0 or equivalent, cut and folded to form a continuously tapered polygonal section having maximum one longitudinal weld. The welding shall comply IS 9595. Masts shall be delivered in three sections of approximately 10.7 m which shall be assembled at site by slip-stress-fit method. The minimum overlap distance shall be 1.5 times the diameter at penetration. There will be no circumferential welding in any section. No site welding or bolted joints in the mast sections will be allowed suitable for wind velocity as per IS 4759 loading fully motorized motor 3 phase 415 volt min 3 HPwith starter & cable 5 core x4sqmm, 2 no. trailing cable permanent for 2 circuit complete along with standard accessories Mast base section will have a lockable door of size 1200mm X 300mm for easy access to winch and power tool operations and provided with 2 no. 4 way SPN MCB enclosure with 2 no. TPN MCB 16A. each. Bottom of door shall be 500mm above the top of the base plate. M.S. fabricated hot dip galvanized housing using IS2062 grade steel accommodating CA pulleys with stainless steel pins for the suspension of wire ropes and the electrical cables. Pulleys are grooved suitably to ensure that the wire ropes/cables do not get dislodged from their positions while raising / lowering. Self-lubricating bearings and stainless steel shaft shall be provided for smooth and maintenance free operation throughout the mast life. The head-frame shall be made in three compartments placed 120 degree apart for most optimum balancing of lantern carriage. Head frame shall have top canopy to protect the mast from entry of water / solid particles etc from the top. Top canopy shall have provision for fixing lightning arrestor of suitable design. LANTERN CARRIAGE A fabricated MS hot dip galvanized lantern carriage shall be provided for mounting of luminaires 500W LED flood light 20 Nos. The luminaire arms shall be welded or bolted to the carriage as per bidder’s design. The lantern carriage shall be made of steel pipes. The flanges shall be jointed at site by stainless steel bolts and nuts. Inner side of the lantern carriage shall have a PVC guide ring to protect the mast surface while raising and lowering of the lantern carriage. The diameter of the lantern carriage shall be of size approximately 1000 mm-1100 mm to accommodate 20 LED light fittings in four tiers and for this double lantern ring will be required. The lantern ring should be fabricated with pipes/channels on the front and back side to get a flat mounting of 20 LED luminaires to take load of luminaires and equal counter weight on other side . The length of the bars should be suitable to mount the LED luminaires. The Double lantern carriage will have top ring at approximately 29.8 m and the second ring will be at approximately 28.5 m. 2 junction boxes shall be provided on the lantern carriage for connecting the luminaries and the trailing cables. A suitable PVC/Hylam BOARD shall be provided at the base of the mast at door level. This will have an MCB of suitable rating for the lighting load of the mast. The MCB will terminate the in-coming supply cable and can be used as a local isolator during maintenance work. Each High mast shall have a weather proof control panel for switching ON and OFF of the luminaires. The control panel is placed at a distance of about 3 m from the mast centre. The control panel shall have provision for operation of the power tool. The control panel should contain an Incomer 4 pole MCB of 63 A rating. The lighting control should be through 2 nos. of 32A contactor, for switching ON and OFF the lights 2 nos. of pushbutton sets shall be provided. For power tool operation there should be 2 nos. of 9 A contactors and suitable overload relay. (Panel to be placed in existing MS pedestal including required material for connection / inter connection with High mast).Two nos. of push buttons shall be provided in the panel for the operation of ‘RAISING’ and ‘LOWERING’ with 16 Nos. foundation bolts & foundation size as per company design supplied by the manufacturer with 2 / 3nos. steel wire rope grade AISI 316, 7/19 Con. dia 8mm, double drum system for safe working load not less than 1500 Kg. and twin dome aviation light with LED including cost of suitable RCC (M-20) foundation as per standard design recommended by manufacture taking soil bearing capacity 4 ton wind speed 180Km per hour including shuttering, bar binding fixing of foundation bolts reffiling the etc. to complete the job in all respect upto entire satisfaction of Engineer-in-charge as per standard design duly approved by structure engineer. Thickness of the mast shall have a minimum top OAF of 200 mm and minimum bottom OAF OF 725mm. Bottom section shall be of 6 mm, Middle section shall be 5 mm and top section shall be of 5 mm Base plate size 925x38x38mm thick.Thickness of Galvanization = Top = 65micron (Min.) middle = 75micron Bottom = 86micron (Min.) Make Philips / Bajaj / Vipin / Valmont. Note:- only 2 nos. moters will be required to be provided by the contractor for 6 No. High mast.

Supply, installation, testing and commissioning of 10 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 1 (one) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 along with head frame / lantern carriage (GI) suitable for 10 nos. luminaire loading fully motorized (power tool) with suitable moter, starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED with RCC foundation including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge Thickness of section = 4 mm (minimum) Top Dia= 150 mm and Bottom Dia= 360mm Thickness of Galvanization = 85 micron (minimum) Make Philips / Bajaj / Vipin / Valmont. Note:- only 3 nos. moters will be required to be provided by the contractor for 21 No. High mast. (No extra payment / deduction on this ground will be made).

S/I/T/C of Ornamental pole of Twinkle Luxmax TDUL-ASTN-HRS-01 Austin Pole 3350mm long with single arm bracket BKT 3133-500 and single Harmony Small PT-169S 40W LED light duly erected on RCC foundation of 1:2:4 size 60x60x150cm having 8 no. vertical bars of 10mm dia and 8mm dia size at 30cm CC duly embedded 1 mtr. below ground levelincluding petty material required complete in all respect. or equivelent Bajaj / Jaquar / Twinkle Lite / Vipin.

S/I/T/C of Gate light / Post top lantern of dia cast aluminium base and spun aluminum top fited with LED PT Module. Power LED on in built extruded Head Sink AUV stabilized injection moulded Prismatic PC diffuser for Glare free Light Luxmax PT-155 40W or equivelent Bajaj / Jaquar / Twinkle Lite etc. duly wired erected on existing GI pipe complete in all respect including all petty material required.

Labour charges for Installation Testing and commissioning of LED flood light fitting suitable for sports on existing pole 10/30 mtr. High mast duly wired including mounting accessories of suitable size to complete the job as per specification of Engineer-in-Charge (But excluding the cost of Luminaires).

M/S PANJETA ELECTRICALS