REPAIR RESURFACING OF INTERNAL ROADS IN THE AOR OF GE HISAR AT HISAR MIL STN

Amount

Scarrifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 50MM but not exceeding 400 sqm in area and applying evenly a priming tack coat with bituminous primer @ 10kg/10sqm

M & L for premix bituminous, macadam with 4% bitumen binder laid/rolled and compacted to required gradient and camber with power roller 8-12 tonne (consolidated thickness 75mm or less)

Repair to potholes any depth, not exc 1 sqm each including sweeping free from mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to atleast 25mm in depth, making good by applying tack coat @ 9.8kg/10 sqm putting in premixed bituminous macadam (incl supply of premixed, binder and chipping) well ramming etc all as specified and directed.

Preparing black top surfaces by brushing with wire brushaes for removing cake mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with VG 30 paving bitumen @ 5 Kg per 10 Sqm complete all as specified and directed.

M&L for 30mm Bituminous premix asphatic semi dense concrete (30mm consolidated thickness) with minimum 5.5% binder content VG-30 byb weight of total mix, laid. Spread with automatic senser mechanical paver, rolled and compacted with 8 to 10 ton power roller to required camber and gradient complete Note : 1 : The minimum consolidated thickness will be 30 mm. However it may be increased at certain places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting the reates. Note 2 : The minimum consolidated thickness should be 40mm at every road turning and nothing extra shall be admissible on this account Note 3 : Seal coat of minimum consolidated thickness 5 to 6mm will be laid at certain places as directed by Engineer-in-Charge and nothing extra shall be admissible on this account

M&L for praparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the line n exc 10cm wide on roads pavements with hot applied thermo palstic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed.

M&L for mmoorum/ Red bajri, 75 mm thick spread, rolled and consolidated to gradient and camber reqd.

Supply and fixing in repair cat eye solar refective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS stud of suitable size as per manufacture instructions.

S & F in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of gigh efficiency mono stafie solar panel 2.4V/0.3 watts one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufactures instructions etc complete all as specified.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

M & L for stainless steel tube, channel, plates etc made out of stainless steel sheet of grade X 02Cr19Ni1O (304 S2) , surface finish no 4 as per IS 6911 : 2017 as in framed work to support signboard, poster etc, welded suitably as per IS 5206 : 1983 including necessary nuts, bolts etc complete all as specified and as directed

S & F in repairs Aluminium composite materials (ACM) signborad, 4 mm overall thickness, sandwiched construction with a thermoplastic core of Low Density Polyethylene' (LDPE) aluminium skin thickness of 0.4 - 0.5 mm and 0.25 - 0. mm respectively on both sides, a flurocarbon coating applied over the exposed surface of aliminium, type-IV high density retro-reflective sheeting made of micro prismatic retro-reflective element material coated with pressure sensitive adhesive on top surface with aluminium surface, digitally colour printed indicating necessary sign., all as mentioned in IRC 67-2022 complete all as specified and as directed.

Sh. Raj Kumar Malik Contractor (BID ID -3329624)

malik constructions (BID ID -3332525)

M/S Sulakh Brothers (BID ID -3329465)

PAWAN KUMAR (BID ID -3326461)

H S Sandhu Builders Pvt Ltd (BID ID -3327746)