Repairing Work of Road LOT-2

Scraping old Painted surface i/c disposal of all scraped material to a distance of 30 M (100 ft ) as directed by Engineer in Charge

Cleaning thick bushes & thorony jungle without uprooting i/c cost of all material, Labour, T&P etc required for completion of proper work.

Earth work in cutting or in embankement with dressing & disposal in ordinary soil including 1.50 M.lift 30 m lead with ramming, dressing the surface etc.

Supplying & laying 75 mm. thick (compacted ) size 53mm to 22.4 mm. stone ballast spreading and compacting stone aggregates of specific sizes to water bound macadam specifications including spreading in uniform thickness, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming stone screening/ binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density.(G3)

Providing and applying primer coat over prepared surface of granular base with slow setting bitumen emulsion complying with IS:8887 with spray set including cleaning of WBM surface spraying primer @ 0.70 kg/sqm including cost of all material, Labour, T&P etc required for completion of proper work as per Morth specification.

Cleaning the existing painted surface and laying premix carpet 2 cm thick over a tack coat with graded approved grit and bitumen VG-30 including heating the paint and grit to the required temperature and mixing either in mixer/hand drum or by manual including cartage of material, maintenance of side patries and watering them during operation for proper completion of work as directed by the Engineer-in-charge including tack coat & all material ,labour, T&P and sundries to be arranged by the contractor.

Cleaning the premixing surface and laying seal coat with approved graded grit and bitumen including heating the paint to the required temperature and mixing either in mixer or hand drum including cartage of materials maintenance of sides patreis and watering them during operation for proper completion of the work as directed by the Engineer- incharge including all T&P and sundreis to be provided by the contractor complete.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. Rate are inclusive of all taxes,royality, etc. all T&P/machine and labour requiredfor proper completion of work.