Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹22.4 L+₹17,929.40 (0.81%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹26.9 L+₹4.6 L (20.7%)Rejected-Finance SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹28.7 L+₹6.4 L (28.9%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
Refer Docs
EMD Value
₹63,700
Closing Date
6 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH AND RH KIRKEE
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Kirkee Pune 411003
REPAIR TO JOINERY CEILING ROLLING SHUTTERS OTHER CERTAIN CONNECTED WORKS IN OTM ACCN AT MH AREA UNDER GE MH AND RH KIRKEE
2023_MES_574153_1
8372/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH AND RH KIRKEE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KIRKEE
₹63,700
3 Mar 2023
10 Jan 2023
8 Feb 2023
10 Jan 2023
6 Feb 2023
25 Jan 2023
10 Jan 2023 - 30 Jan 2023
Amount
Taking down chowkat without taking off shutter from frame n.exc 1.5 sqm each all as specified and directed.
Taking down chowkat without taking off shutter from frame exc 1.5 and n.exc 4 Sqm each all as specified and directed
Taking down shutters of any description exceeding 1 Sqm and n.exc 2 Sqm each all as specified and directed.
Taking down shutter from frame exc 2 Sqm each and removing from the site all as specified and directed
S&F 125x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.
S&F 105x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.
M&L for PCC M-10 grade (nominal mix) using 12.50mm graded stone aggregate as in filling of pressed steel chowkat all as specified and directed
S&F 35mm thick (1st Class hardwood) factory made gauzed and skeleton door shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a), supplied and fitted to chowkats all as specified and directed
S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed.
S&F 30mm thick flush shutters, solid core construction with block board core and plywood face panels, decorative face veneer on both sides with lipping / frame to match complete all as specified and directed.
S&F 30mm thick single piece, coloured ABC(ACRYLONITRILE BRUTADINESTYRENE) coated, PUF filled doorshutters with PUF (Poly UrethaneFoam) insulation of minimum density 40 Kg/Cum filled in between two ABSsheets of thickness 1.2mm (min), bordercovered with insitu pasted ABS stripsof width equal to thickness of doorshutters, 1.2mm thickness, reinforced with two number 10mm CTD bars, included with wooden blocks of suitable sizes for receiving hinges,tower / sliding bolts, towel rails,handles etc,with/without embossed pattern for operation theatres and ICU Wards all as specified and directed
Supply and fixing Fiber Glass Reinforced plastic (FRP)Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides. M.S.stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed.
S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed.
S&F aluminium powder coated (minimum thickness of power coating shall not be less than 50 microns of approved colour) window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as directed. Note : 4mm thick glazing & 0.56 mm dia SS wire mesh shall be deemed to be included in unit rate quoted.
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
S&F aluminium louvered ventilators of section size 100mm x 25mm x 1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator all as directed by Engr-in-Charge. Note : 4mm thick frosted glass & 0.56 mm dia SS wire mesh shall be deemed to be included in unit rate quoted.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron of approved colour) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all as specified and directed.
S&F powder coated (minimum thickness of powder coating shall not be less than 50 microns of approved colour) aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed
S&F powder coated (minimum thickness of powder coating shall not be less than 50 microns of approved colour) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F in repair locking arrangements of CP brass for aluminium doors i.e , by placing new lock 4 lever, vertcal type of 65mm , with triplicate key etc complete all as specified and directed.
S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.
S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.
S&F in repairs 150mm rubber door stopper of aluminium alloy body, anodised all as specified and directed.
M&L 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work , aluminium works etc all as specified.
S& F 4 mm thick sheet glass ordinary quality glazing in square exc. 0.5 sqm in each pane all as specified and directed.
S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing with shutters complete all as specified and directed.
S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing with shutters complete all as specified and directed.
S&F in repair 2nd class hard wood plain, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in cupboards, almirah in any position including polish complete all as specified and directed.
S&F in repairs 40mm width continuous (paino) hinges, mild steel, bright finish or electrogalvanised all as specified and directed
S&F in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves all as specified and directed.
S&F in repairs cup board knobs 40mm size with all fixing screws etc complete all as sepcified and directed.
Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S&F in ordinary glass 3mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed
S & F stainless steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed & fixed length of bolt 250 mm all as directed.
S & F Aluminium anodised sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed & fixed length of bolt 250 mm all as directed.
S & F Stainless steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 150mm long all as specified and directed
S & F in repair of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 125mm all as directed.
S&F 75 mm stainless steel butt hinges medium weight, cold rolled all as directed.
S&F 125 mm stainless steel butt hinges medium weight, cold rolled all as directed.
S & F 150 mm size Stainless steel handles all as specified and directed.
S & F in 125 mm size extruded aluminium alloy handles, fabricated type anodised all as specified and directed.
M&L for preparation to new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer all as specified and directed.
Dismantling steel rolling shutter including assembly exceeding 4 Sqm but not exceeding 12 Sqm and repair for proper functioning by replacing rolling assembly and re-erecting the shutter, including straightening, cutting and welding of shutter angles, channels providing proper guides as required and making good, functioning by applying greasing , oiling for smooth and easy movement of the shutter and applying two coats of synthetic enamel paint of matching colour/shade, including preparation of old steel surfaces complete all as specified and directed.
S&F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivot flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete M-15 grade (nominal mix) using 20mm graded stone aggregrate, depth of embedded portion of holdfast exc half bricks and not exc one brick all as specified and directed
M & L for cement concrete M-15 grade (nominal mix) using 20mm graded stone aggregate for filling in holdfast complete all as directed.
M&L for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete all as specified.
M&L for preparation of primed surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour complete all as specified.
S&F in repairs vertical type venitian blinds with sliding & revolving track & 100mm wide approved coloured fabric etc complete all as specified and directed.
S&F in repairs Stainless steel pipe 25 mm dia as in curtain rod fixed to brakets all as specified and directed. Note :- Brakets shall be measured and paid separately.
S & F in repairs decorative type stainless steel brakets for curtain rods all as specified and directed.
Dismantling wall and ceiling boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets all as specified and directed.
Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.
S&F 19mm thick gypsum semi - perforated edge 60 x 60 cm as in ceiling board laid over GI grid all complete for all heights as per specifications and as directed by Engineer-in-charge.
S & F gypsum wallboard, 12.5 mm thick as per IS 2095 (Part 1): 2011, tapered edge, fixing to ceiling section and perimeter channel using dry wall screws of size 3.5 mm X 25 mm at 230 mm c/c including jointing and finishing to a flush finish of tapered edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and applying two coats of plastic emulsion paint including prepartion of surface complete all as specified and as directed.
S&F POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction all as specified and directed.
S&F in repairs Trac ceiling by installating round edge panels 84mm width x 16mm deep x length upto 5m formed from 0.50mm thick aluminium alloy IS-31000/AA3105 with stove enamelled coil coated on the exposed side as per standard colour shades, the aluminium flush profile shall be inserted in 16mm gap between the panels (close type) & 25mm glass wool, panel carrier 32mm wide, 39mm deep made of 0.60mm galvanised steel upto 5m made of double backed enameled black with cutout to hold on panel in a module of 100mm close, the carries shall be suspended from slab by J hook and 4mm dia galvanised rod with special height adjustment clip made out of GI sheet at max 1.20m centre to centre, the edge profile aluminium shall be matching with the panel complete all as specified and directed.
V.R.PRAJAPATI AND CO.
VP DEVELOPERS AND CONTRACTOR
ARK ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .