REPAIR TO JOINERY, INTERNAL WATER SUPPLY AND CONNECTED WORK AT MEDICAL COMPLEX AND ADJOINING AREA UNDER AGE BR-I OF GE (NORTH) UDHAMPUR.

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness as in floors, aprons etc, laid, beded and pointed, complete all as specified and directed.

M&L for non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectanglear), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

All as per serial item No. 5.00 here-in-above but as in skirting, dados, vertical surfaces, fixed over and including 10mm thick rendering in CM 1:4.

M&L for non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectanglear), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

All as per serial item No. 7.00 here-in-above but as in skirting, dados, vertical surfaces, fixed over and including 10mm thick rendering in CM 1:4.

M&L for coloured glazed ceramic tiles of size 350mm x 250mm x 7mm or 450mm x 350mm x 7mm as on vertical surfaces of walls, dados, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for 10mm thick vitrified light shade ceramic tiles (square/ rectangular), polished, area of each tiles not exceeding 0.36 Sqm as in floors, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 10mm thick vitrified light shade ceramic tiles (square/ rectangular), polished, area of each tiles exceeding 0.64 Sqm but not exceeding 1.0 Sqm as in floors, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing with rounding to edges of stone slabs one edge complete, laid/ fixed over and including 10mm thick screed bed or backing coat in CM 1:4, complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering into two layers consisting 10mm thick in CM 1:4 followed by 5mm thick in CM 1:4 with using WPC on fair faces of brick work or concrete surface including finishing the surface even and fair without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

M&L for 5mm thick rendering on ceiling surfaces of concrete or brick work in CM 1:3, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer and 1mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer, complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.

All as per serial item No. 20.00 here-in-before but except bricks. Note :- Old bricks obtained from serial item No. 19.00 here-in-above shall be used.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and directed.

All as per serial item 22.00 here-in-above but except stone. Note :- Old stones obtained from serial item No. 19.00 here-in-above shall be used.

M&L for raised pointing to random rubble, uncoursed on brought upto course stone masonry or concrete block walling in cement mortar 1:4, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping etc including necessary formwork as required, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

M&L for RCC 1:2:4 (Nominal Mix) type B-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use and waste of dormwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways (not exc 2.0 Sqm each) and finished the surface even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

M&L for water proofing treatment to the sunken portion area of each sunken portion with removing of exiting treatment with demolition of existing floor of any type upto depth not exc 0.60 mtr including filling of floor with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates), WC & P/S trap and cleaning with wire brush, one coat of bitumen @ 1.70 Kg per Sqm, 15mm thick plaster in CM 1:4 on all sides portion, one 450mm long 32mm dia spout, water proofing powder @ 3% mixed by weight of cement, complete all as specified and directed.

S&F in replacement WC (squatt pattern) including cement concrete bedding, size 580mm x 440mm including PVC 'P or 'S' trap, front and back inlet and with internal foot rests (excluding flushing cistern) including flush pipe and connector pices of PVC and removed old CI Pipe including demolition of PCC upto 450mm depth, complete all as specified and directed.

S&F in replacement wash down water closet (Pedestal pattern), complete with pedestal pan and 'P' trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. including PVC seat and cover for pedestal pan and CP Jet spray alongwith flexible tube/ pipe, complete all as specified and directed.

S&F in replacement PVC low level flushing cistern of capacity 10 ltrs, white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipe, complete all as specified and directed.

S&F in replacement wash basin, vitreous china (flat back or angle back type), size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling of 32mm dia and PVC waste pipe of 32mm dia, complete all as specified and directed.

S&F in replacement vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) but including urinal spreader with PVC connection of 15mm dia with PTMT nuts of length 450mm and PVC waste pipe of 32mm bore and CP waste coupling, complete all as specified and directed.

S&F 12mm thick toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes and necessary fittings as required at site, complete all as specified and directed.

S&F in replacement chromium plated swan neck pillar cock, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F in replacement sheet glass shelf assembly, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in replacement PVC connection pipe of 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in replacement health faucet, CP, brass with 8mm dia and 1 mtr long flexible tube with wall hook, complete all as specified and directed.

S&F in replacement CP Jet for EWC's with required size of jet pipe (flexible) and connections, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes of any size or pattern including all fittings, heads, shoes, bends, swan necks etc. including necessary arragement for fixing of pipe like scaffolding, ladder and all other fittings / accessories, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamps of suitable size with nuts and bolts, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamps of suitable size with nuts and bolts, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with access door, any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with access door, any radius, complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal of bore 110mm, complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal of bore 75mm, complete all as specified and directed.

Cleaning of water tank of capacity exc 250 ltrs but not exc 500 ltrs including removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc, complete all as specified and directed.

Cleaning of water tank of capacity exc 500 ltrs but not exc 1000 ltrs including removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc, complete all as specified and directed.

Cleaning of water tank of capacity exc 1000 ltrs but not exc 2000 ltrs including removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc, complete all as specified and directed.

Dismantling water tank of capacity exc 250 litres but not exc 500 litres with all necessary fittings and removing to store, complete all as specified and directed.

Dismantling water tank of capacity exc 500 litres but not exc 1000 litres with all necessary fittings and removing to store, complete all as specified and directed.

Dismantling water tank of capacity exc 1000 litres but not exc 2000 litres with all necessary fittings and removing to store, complete all as specified and directed.

S&F tripple layered rotational moulded polyethylene water storage tank of 500 ltrs Capacity (cylindrical vertical with closed top) with and including 20mm dia ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank nipple inlet and outlet and connecting pipes, complete all as specified and directed.

S&F tripple layered rotational moulded polyethylene water storage tank of 1000 ltrs Capacity (cylindrical vertical with closed top) with and including 20mm dia ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank nipple inlet and outlet and connecting pipes, complete all as specified and directed.

S&F tripple layered rotational moulded polyethylene water storage tank of 2000 ltrs Capacity (cylindrical vertical with closed top) with and including 20mm dia ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank nipple inlet and outlet and connecting pipes, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F 25mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F in replacement bib tap, long body, chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule including elbow/ socket etc as required at site, complete all as specified and directed.

S&F CP shower with arm 15mm dia, 195mm long with bend of 45 degree with wall flange including taking down existing UNSV shower of any type/ shape, complete all as specified and directed.

S&F in replacemetnt angle cock, chromium plated, cast copper alloy, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F in replacement stop valve, concealed type, long shank, chromium plated, brass, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed for 15mm bore iron pipe or for union, complete all as specified and directed.

S&F in replacement plastic water closet seat cover, white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in replacement chromium plated tubular towel rail, 'D' type, 600mm long between flanges, complete all as specified and directed.

S&F in replacement waste fittings, brass chromium plated for glazed ware sink, sink coupling, basins etc. with long screwed shank and fly nuts, flanges end bedded in red lead cement and other end fixed 40/32mm dia, complete all as specified and directed.

S&F in replacement CP brass grating of 100mm dia, with centre hole, complete all as specified and directed.

S&F in replacement PTMT ball valve, high pressure with polythene float and fly nut, screwed for 20mm bore iron pipe, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of pink primer, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as filling in back of pressed steel door frame / hold fasts, complete all as specified and directed.

Checking of joinery (wooden/ steel) iron/ aluminium mongery, pelmet box, door springs etc. requiring carpentry work and carrying out minor repairs such as tightening of screws/ nails, minor adjustment of joinery, door/ windows by means of planer/ chisling etc. including petty repairs material like screws, nails, plug etc. to make it functional, complete all as specified and directed.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/ fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc. including petty materials like washers of all sizes, thread (shoot), M-seal, screws, nails and white cement to make water supply/ plumbing lines functional and leak proof, complete all as specified and directed. Notes for serial item Nos 77.00 & 78.00 :- (a) Any items required to be replaced except mentioned shall be paid under respective items and in that case this items shall not be measured and paid. (b) The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell / Engr-in-charge daily and all complaint will be rectified by the contractor with in same day than the returned the complaint slip after completion of complaint and get recipt from concered JE/ Engr-in-charge. If he fails to complete the work with in same day then recovery will be made @ RS. 150.00 per complaint per day.

S&F in replacment 25mm dia stainless steel curtain rod with fixing of domes, stainless steel brackets etc, complete all as specified and directed.

S&F in replacement sink with drainage board, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including waste coupling and waste pipe and bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1040mm x 510mm x 203mm, bowl size 510mm x 405mm x 203mm, complete all as specified and directed.

S&F in replacement sink, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling inlcuding bedding in cement mortar to dwarf wall or including fixing cantilever brackets, PVC waste pipe and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking down chowkats or frames of any type or description (without taking off shutters from frame), area not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down and refixing in same opening of wooden/ PVC shutters of any description after easing/ cutting as per requirement, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm, made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per site, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 4mm thick plain/ pin headed sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4mm thick plain/ pin headed sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, complete all as specified and directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm long aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 100mm long stainless steel butt hinges, heavy weight, cold rolled, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S&F MS helical door spring 150mm size including roller and roller plate, fixed to wooden or steel frames with welding etc, complete all as specified and directed.

Taking down chowkats or frames of any type or description (without taking off shutters from frame), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

S&F pressed steel frames of section size 105x60mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete and including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F pressed steel frames of section size 125x60mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete and including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F 35mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face sanmika (pattern and design as approved by GE) with lipping/ frame to match and polished on sides of shutters, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton, factory made, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, complete all as specified and directed.

Taking down shutters of any description, area nor exc 1.0 Sqm each, complete all as specified and directed.

S&F in repair 18mm thick prelaminated medium density fibre boards, glossy finish/ UV finish interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in cup board, shelves, kitchen cabinet etc, complete all as specified and directed.

S&F 100mm size anodised aluminium hasp and staple, safety type, with hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in replacement 100mm size anodised aluminium hasp and staple, safety type, with hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling including provn of parts such as rubber gasket, blanket cloth but hinges etc. to make door or window fully functional, complete all as specified and directed.

S&F mortice lock with two lever, mild steel body (vertical type), 100mm length of latch with 3 set of keys, fixed in door shutter with proper in position, complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets, complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling, complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building boards designer, fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws, complete all as specified and directed.

S&F powder coated (of approved colour) aluminium sections as in frame and shutter of doors, windows (hung/ sliding type), ventilators (louvers/ fixed type) and fixed frame etc, fixed to wall including preparation of disturbed portion both side (internal & external surfaces of wall) to match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/ outer face), complete all as specified and directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete as per site requirement and direction of Engineer-in-Charge.

S&F powder coated aluminium hinges, suitable for aluminium openable windows, 100mm long match with ventilator/ window shutters, fixed with screws, complete all as specified and directed.

S&F 5mm thick frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/ windows in square/ rectangular exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 5mm thick frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/ windows in square/ rectangular not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 5mm thick printed colour PVC sheet as in aluminium doors/ partitions, fixing wirh rubber neoprene packing and powder coated aluminium beading, complete all as specified and directed.

S&F in replacement door closer of aluminium die cast body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to1000mm in width and of weight between 61 to 80 KG, complete all as specified and directed.

S&F 5mm thick insulated PVC Wall Lining honeycombed (As per sample kept in GE's office), consisting of PVC insulated panels with approved colour and design, printed PVC sheet used colour, PVC sheet duly fitted into the wall including PVC sheet in strips feathered at the edges including removing and re-fixing electric switch boards and plates and covered with PVC stripes or beading after fixing wall panelling as per specifications, complete all as specified and directed.

S&F in replacement double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium glass door shutters of 851 to1000mm in width and of weight between 61 to 80 KG, complete all as specified and directed.

HANS RAJ SHARMA (BID ID -3290135)

KUMAR CONSTRUCTION CO (BID ID -3289746)

MAHAJAN TRADING CO (BID ID -3294499)

ASHOK KUMAR PURI (BID ID -3292622)