REPAIRS ROUTINE MAINTENANCE OF LIFTS IN MEENA KANYA SWATI CHITRA ANURADHA WNC O MESS MAIN OLD ANNEX NEW ANNEX 42 SOQ WNC O MESS AND OLD ANNEX ALONGWITH MANNING AND OPERATION UNDER GE NW NOFRA

Amount

Repair/maintenacne of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of crack/broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of unserviceable damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work ,cabin, minor repair of cabin light and minor repair of cabin fan , ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engineer-in-Charge. for the following lifts:- Note : - (i) Two mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (ii) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department.(iii) The detailed duty mechanics of the firm shall report to the JE Concerned at the Lift complaint cell for receiving the complaints round the clock daily including sunday and holiday.(iv) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell.Location- Meena, Kanya (G+13 upper floor) 02 Nos lift

All as per item No 1.00 above here in before but 06PS (408 Kgs) in WNC (O) mess main building (G+7 upper floor) 02 Nos lift at Nofra complete all as directed by Engr-in-Charge

All as per item No 1.00 above here in before but 08PS (544 Kgs) in building in WNC (O) Mess old Annex-2 (G+6 upper floor) 02 Nos lift complete all as directed by Engr-in-Charge

All as per item No 1.00 above here in before but 13PS (884 Kgs) in building in Meena, Kanya (G+13 upper floor) 02 Nos lift complete all as directed by Engr-in-Charge

All as per item No 1.00 above here in before but 1000kg goods lift in building in Swati & Meena, (G+13 upper floor) 02 Nos lift complete all as directed by Engr-in-Charge

All as per item No 1.00 above here in before but 6 PS (408 Kgs) in building in WNC (O) Mess VIP (G+7 upper floor) 01 No lift complete all as directed by Engr-in-Charge

All as per item No 1.00 above here in before but 13PS lift (884 Kgs) in building : Chitra & Anuradha (G+14 upper floor) 02 Nos lift complete all as directed by Engr-in-Charge

Dismantling and taking out unserviceable travelling cable from hoistway & supply and fixing new travelling cable PVC insulated 12 Core flate round type with standared copper conductor, 1100 volts grade of size 0.75 sqmm conforming to relavent IS in and including thimbles, suspended type freely move with car cabin up and down movement between ground and upper floors including necessary proper connection with mid way junction and other connection require in circuit complete all as specified and directed by engr-in-charge Locations: MEENA AND KANYA

Dismantling and taking out old unserviceable landing door from various floors & supply and fixing new landing door comprise of 02 No power operated auto telescopic / centre opening by horizontal sliding stainless steel panel 800 mm Opeing 1.2 mm thick complete with door suitable for (1000 Kgs Goods Lift) complete all as directed by Engr-in-Charge Locations : MEENA, SWATI

Dismantling and taking out unserviceable car door from car cabin supplying and fixing new car door comprises of 02 No power operated, auto telescopic / centre opening by horizontal sliding stainless steel panel of 800 mm Opening 18 SWG with hairline finish (N-304) flush type panels complete with removed headers, hangers, door drive unit with full beam infrared sensor up to full length of car door, aluminium sill VVVF door drive unit for motor complete with all accessories control connection etc. for 1000 KG Goods lift all as Specified and directed by Engr-in-Charge Locations : MEENA, SWATI

Dismantling existing lift car and supply and fix new car made of stainless steel hair line finish, 1.5 mm thick, stainless steel 304 grade, as per existing size, arrangement to fix car door operator, made of MS sheet platform covered with 5 mm thick aluminium flooring, SS false ceiling with LED lights, Fan, ETc for 1000 Kg Goods Lift complete all as directed by Engr-in-Charge Locations : MEENA , SWATI

Taking down old speed governor complete with pit pulley and machine room pulley and Supply and fixing new pulley complete all as directed by Engr-in-Charge. Location Meena Goods,Swati Goods,WNCO MESS (05 Nos) Kanya Officer lift

Dismantling and taking out all defective batteries from existing ARD and supply and fixing new maintenance free batteries suitable for ARD including necessary connection like battery terminals of brass and copper lead heavy duty to connect the battery terminal of 12 VDC, 18 AH (one set-04 nos batteries for each) ARD.complete all as directed by Engr-in-Charge

Disconnecting & taking out unserviceable landing push button and supply and fixing landing push button complete new with LED indicator and button for operation suitable for communication system all as specified and directed by Engr-In-Charge. Locations Chitra, Kanya

Dismantling and taking out old unserviceable Buffer springs of Existing Dia and size for suitable for 13 passenger lifts complete all as directed by Engr-in-Charge Locations : NOFRA area

Dismantling and taking out all defective existing old defective sensor and supply and fix INFRA RED safety edge with power unit on car door to safe guard passenger entering and leaving the lift suitable for Passsenger lift and 800/900 mm x 2000 mm door opening Location : NOFRA

Manual operation of electrically operated lift (08 to 13 PS /1000Kg Goods) of any Make and model to serve up to G+6 upper floor(old annex building at WNC (O) mess, G+7 upper floor WNC (O) mess main, building G+13 upper floor (Meena,Kanya and Swati) and G+14 upper floor (Chitra, Anuradha), G+06 upper floors (New Annex building old annex ,42 SOQ building at WNC (O) mess main daily 16hrs) daily 16 hrs (including sundays and holidays) in two shift from 0600 hrs to 1400 hrs and 1400 hrs to 2200 hrs, including taking care of from any pilfrerage/ theft or damage etc, complete all as directed by Engineer-in-Charge.( total-09 buildings) Note :- (i) 09 Nos of lift operator should be employed for above bldgs in two shifts per day. (ii) Passes will be processed only after verification of antecedence of deployed employees and submission of verified experience certificate, Pass shall not be granted without submission of qualification proof & experience certificate for lift operator. In case of OEM, the qualification mentioned in note is not applicable which shall be verified by Engineer-in-Charge before issue of passes (iii) Contractor shall submit ID proof, Residential proof, Bank A/C details to department and obtain approval of Engineer-in-Charge before employing a person as Operator (iv) Payment to employees shall be done by crossed cheque through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. The contractor shall submit proof to Engineer-in-Charge before claiming any payment. (v) Lift operator (semi skilled) shall be available with lift cell as per the shift timings specified in the tender and he will report to JE E/M in-Charge or Lift Cell in-Charge. In case of emergency he will function according to their direction. If he is found absent or move without intimating to in-Charge of Lift Cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs 1500/- per shift shall be affected.(v) Payment as per quoted rate shall also be deducted in addition to the penalty as specified above. (vi) In case of malfunctioning if any noticed, lift operator shall intimate to the lift cell. The individual employed as lift operator should has minimum qualification of 10th or equivalent from state or central board

(vii) Contractor shall submit the labour licenece VAT as applicable as per latest laws/acts & Copy of GST Regn registered number issued by concerned authority. (viii) Insurance coverage, compensation if any applicable or necessitated due to mis operation of lift shall be the responsibility of contractor. The quantum of compensation shall be assessed based on the BOO composing of Lift Inspector of Maharashtra State, representatives of both agencies carrying out M&O works and routine maintenance work of lift and members from department. (ix) Contractor has to submit proof of payment of EPF subscription made by him as applicable as per latest laws/acts alongwith RAR failing which RAR will not be progressed for payment. (x) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable. (xi) The bidders are advised not to quote rate less than minimum fair wages as circulated by competent authority. If the quoted amount is less than the estimated cost of work mentioned in BOQ item No 17.00 i.e Rs 30,69,000.00, the lowest bidder will have to deposit FDR/BGB as elaborated herein after in favour of Accepting Officer within 07 days of opening of financial bid (Cover No 2). The deposited amount shall be the difference between estimated cost mentioned in BOQ item No 17.00 (i.e) Rs 30,69,000.00 and amount quoted by lowest bidder. FDR/BGB shall be released only after satisfactory completion of work. If the contractor fails to pay minimum wages to employees, the department shall have right to withhold the said amount which will be verified by GE. The decision of Accepting Officer regarding amount to be withhold shall be final and binding. The withhold amount will be utilised by GE for payment to employees if contractor fails to pay minimum wages and balance amount if any shall only be released. If the lowest bidder fails to deposit the amount as stated above within 07 days, the contractor shall be banned for 06 months & his bid shall be rejected. The contractor shall sumbit 03 Nos of BGBs/FDRs of equal amount as mentioned above. The BGBs/FDRs validity shall be 04 months, 08 month & 12 months respectively for the purpose of encashment/ release as the case may be. (xii) The rates quoted shall be inclusive of suitable reliver wherever sundays & holidays are mentioned for working

Veer High Tech Solution

Shree Elevator Engineering Co.

Escon Elevators Pvt Ltd

shakti engineering and electrical works