Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹24.4 L
EMD Value
₹24,413
Closing Date
2 Dec 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer
Singannagudem,Bhongir Town
CONSTRUCTION OF SC COMMUNITY HALL AT DHARMARAM VILLAGE OF ADDAGUDUR MANDAL OF YADADRI BHONGIR DISTRICT, ESTIMATE COST RS.:30.00 LAKHS, GRANT:SDF 2025-26
748910
PRSEBNG/40/2026-27 Dt:26.10.2026 (1st Call)
OPEN
Buildings
YADADRI BHUVANAGIRI, TELANGANA
18 documents required · 17 mandatory · 1 optional
₹1,441
₹24,413
16 Nov 2026
16 Nov 2026
16 Nov 2026
90 days
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc., complete.
Plain Cement Concrete of (1:4:8:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG M/c (SS5) metal with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, overhead charges & Contractors profit etc., complete but excluding GST & seigniorage charges, sales & other taxes on all materials,for finished item of work for Foundations (APSS No. 402).
Plain Cement Concrete of (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG M/c (SS5) metal with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, overhead charges & Contractors profit etc., complete but excluding GST & seigniorage charges, sales & other taxes on all materials,for finished item of work (APSS No. 402).
Supply and filling of earth (ordinary soil) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) including cost and conveyance of all material and labour charges,and contractors profit & over heads but excluding seignorage charges and GST etc., complete.
Filling with gravel in basement as per APSS No.309 & 310 with initial lead in layers not exceeding 150mm thick, compacting each deposited layer by watering and ramming including cost of water to work site and all operational, incidental, labour charges, overhead charges & Contractors profit etc., complete for finished item of work (including GST on materials) and excluding seignorage charges for Basement including GST on material.
Construction of RR Masonry in CM (1:6) Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including cost and conveyance of all material and all operational, incidental, and labor charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., and including over heads & contractor's profit, but excluding VAT and seigniorage charges complete for finished item of work for foundation and basement (APSS No. 601 & 615) (BLD-CSTN-6-12)
Providing RCC M20 grade nominal mix using 43 grade Cement, Crushed granite metal of 20mm nominal graded size as Coarse aggregate and River sand as Fine aggregate as per APSS No.403 including cost & conveyance of all materials, hire charges for centering and scaffolding using casuarinas bullies, wooden reapers, runners, wood posts and wall plates, machine mixing charges and labour charges etc.,complete including GST on material. Footings
Providing RCC M20 grade nominal mix using 43 grade Cement, Crushed granite metal of 20mm nominal graded size as Coarse aggregate and River sand as Fine aggregate as per APSS No.403 including cost & conveyance of all materials, hire charges for centering and scaffolding using casuarinas bullies, wooden reapers, runners, wood posts and wall plates, machine mixing charges and labour charges etc.,complete including GST on material. Pedestals
Providing RCC M20 grade nominal mix using 43 grade Cement, Crushed granite metal of 20mm nominal graded size as Coarse aggregate and River sand as Fine aggregate as per APSS No.403 including cost & conveyance of all materials, hire charges for centering and scaffolding using casuarinas bullies, wooden reapers, runners, wood posts and wall plates, machine mixing charges and labour charges etc.,complete including GST on material. Plinth Beam
Providing RCC M20 grade nominal mix using 43 grade Cement, Crushed granite metal of 20mm nominal graded size as Coarse aggregate and River sand as Fine aggregate as per APSS No.403 including cost & conveyance of all materials, hire charges for centering and scaffolding using casuarinas bullies, wooden reapers, runners, wood posts and wall plates, machine mixing charges and labour charges etc.,complete including GST on material. Columns
Providing RCC M20 grade nominal mix using 43 grade Cement, Crushed granite metal of 20mm nominal graded size as Coarse aggregate and River sand as Fine aggregate as per APSS No.403 including cost & conveyance of all materials, hire charges for centering and scaffolding using casuarinas bullies, wooden reapers, runners, wood posts and wall plates, machine mixing charges and labour charges etc.,complete including GST on material. Roof Beams
Providing RCC M20 grade nominal mix using 43 grade Cement, Crushed granite metal of 20mm nominal graded size as Coarse aggregate and River sand as Fine aggregate as per APSS No.403 including cost & conveyance of all materials, hire charges for centering and scaffolding using casuarinas bullies, wooden reapers, runners, wood posts and wall plates, machine mixing charges and labour charges etc.,complete including GST on material. For roof slab 125mm thick
Providing RCC M20 grade nominal mix using 43 grade Cement, Crushed granite metal of 20mm nominal graded size as Coarse aggregate and River sand as Fine aggregate as per APSS No.403 including cost & conveyance of all materials, hire charges for centering and scaffolding using casuarinas bullies, wooden reapers, runners, wood posts and wall plates, machine mixing charges and labour charges etc.,complete including GST on material. For slab100mm Thick
Providing RCC M20 grade nominal mix using 43 grade Cement, Crushed granite metal of 20mm nominal graded size as Coarse aggregate and River sand as Fine aggregate as per APSS No.403 including cost & conveyance of all materials, hire charges for centering and scaffolding using casuarinas bullies, wooden reapers, runners, wood posts and wall plates, machine mixing charges and labour charges etc.,complete including GST on material. Lintels
Providing RCC M20 grade nominal mix using 43 grade Cement, Crushed granite metal of 20mm nominal graded size as Coarse aggregate and River sand as Fine aggregate as per APSS No.403 including cost & conveyance of all materials, hire charges for centering and scaffolding using casuarinas bullies, wooden reapers, runners, wood posts and wall plates, machine mixing charges and labour charges etc.,complete including GST on material. Sun shades (0.6025 mtrs avg.thick)
Plain Cement concrete (M 15) Nominal Mix 1:2.5:5 using 40mm, 20mm & 10 mm metal wih concrete mixture including cost & conveyance of all materials like cement, sand, coarse aggreagate, water etc to site all operational, incidental and labour charges such as mixing, laying and ramming, curing including OH & contractors profit etc.., complete but excluding GST & seigniorage chrges, for finished item of work for bed blocks
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including Cost and Conveyance of all materials like cement, sand, bricks, water etc., to site, including materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).
Supply and fixing of Sal Wood Door frame and double shutter of size 1.50 X 2.10mts including fixing of 6 Nos of M.S. Hold fasts, 6 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges etc., complete including GST on material.
Supply and fixing of Sal Wood Door frame and double shutter of size 1.20 X 2.10mts including fixing of 6 Nos of M.S. Hold fasts, 6 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges etc., complete including GST on material.
Supply and fixing of Sal Wood Door frame and double shutter of size 1.05 X 2.10mts including fixing of 6 Nos of M.S. Hold fasts, 6 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges etc., complete including GST on material.
Plastering to brick masonary wall with 20mm thick double coat in CM (1:6) 16 mm thick base coat and CM (1:4) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for outer Walls.
Ceiling plastering of 12mm thick with CM (1:3) including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for CEILING PLASTERING.
Plastering to brick masonary wall with 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for Internal Walls.
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including soverhead charges & Contractors profit but exlcuding GST and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
Painting to Wood work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of wood primer making three coats in all to give an even shade after thoroughly brushing the surface to remove all remains of loose powdered materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work (APSS No.1201,1207 &1212).
Flooring with Vitrified Tiles tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including over heads & contractor profit cost and conveyrance of all materials like tiles, cement, sand and water etc., complete but excluding GST and seigniorage charges, etc., complete for finished item of work.
Providing dadooing to walls with 5 to 7mm thick ceramic wall tiles 1st quality of 7.30mm and of size approved by Engineer-in-Charge, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including over heads & contractor profit, cost of all materials like tiles, cement, sand and water etc., complete including complete for finished item of work, but excluding GST and seignorage charges.
Flooring with Ceramic non skid tiles of not less than 7.3mm thick 1st quality laid over floor bed /VRCC slab set over 12.0 mm th.in CM (1:8 ) prop. base coat and neat grey cement slurry of honey like consistence spread at the rate of 3.3 kg of cement per Sqm and jointed with neat white cement paste mixed with pigment of matching shade including cost and conveyance of all materials to site, including cost of mixing of mortar and watering, leveling to proper slope and curing including over heads & contractor profit, all labour charges etc., and excluding GST and seignorage charges for finished item of work but excluding cost of CC bed and dadooing to walls
Supplying and fixing of Unplasticized Poly with mesh shutter provision – (2-glass shutters)- 95 -Series duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (108 mm x 45 mm)/(95.50 mm x 60 mm) x 2.20 mm for outer frames, (75 mm x 39 mm)/(66 mm x 42 mm) x 2.20 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be itted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with rey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of Patio/Bent espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and onveyance of all materials, accessories, labour charges for transportation, erection at site complete for Vinyl Chloride (UPVC) 3 track sliding doors finished item of work.
Providing Mild steel flats and bars for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, all operational, incidental, and labour charges such as cutting, bending, placing in position etc., but excluding GST for finished item of work (APSS No.126) in all floors. For window grills, staircase railing & Compound wall grills etc
Supply and Laying of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe of makes Sudhakar / Maco Plast / Modi. make concealed in Roof Slabs with all required PVC / Metallic Deep Boxes including masonary work and labour charges, cost and conveyance of all material, all labour charges, and contractor profit etc., complete
Supply and laying of 25mm dia 2.0mm thick P.V.C.pipe ISI mark of Sudhakar / Maco Plast / Modi make concealed in wall with PVC / Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size Metallic deep box including all labour charges etc., complete including masonary work, cost, conveyance of all material, labour charges etc., complete.
Wiring with run of 2 of 14/0.3mm (1.0 Sq.mm) FR / FRLS PVC insulated flexible ISI mark copper cable ( 100V grade as perIS:694/1990 ) of KEI / Polycab / Havells / GM / Million / HPL / Gold Medal / Power Flex / RPG / Anchor / Great White / Sun Cab / Fortune Art make in existing pipe with 6A 1 Way flush type Swich of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega, Ceiling rose 3 Plate of makes Anchor / Gold Medal Olive / Million Zoom and Supply of Decolam Board of Size 8" x 10" as switch control box including cost, conveyance of all material, labour charges etc., complete for light, bell, fan points
Supply and Run of 2 of 36/0.3mm (2.50 Sq.mm) FRLS PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable of makes Ploycab / Havells / Sun Cab / Gold Medal / Million /Fortune Art / Paragon / HPL / L&T / Power Flex / RPG /Anchor / Bonton. with Run 1 of 14/0.3mm(1.0Sqmm) FRLS PVC insulated 1100Vgrade as perIS:694/1990 specification for Copper cable of makes Ploycab / Havells / Sun Cab / Gold Medal / Million /Fortune Art / Paragon / HPL / L&T / Power Flex / RPG /Anchor / Bonton make including cost and conveyance of all material and labour chages
Supply and fixing of 6A 3 Pin flush type wall plug socket with 6A switch control of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega on a common switch board with earth connections in surface / consealed wiring including cost and conveyance of all material and labour charges
Supply and fixing of 16A 3pin / 6A 3pin ISI mark Flush type plug Modular socket with 16 Amps flush type Switch Socket combined (2 in one) of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega make duly recessed in wall with wooden deep box of 6" x8" x2 1/2" size covered with 3mm thick hylam sheet including earth connections and cost and conveyance of all material and all labour charges etc., complete
Supply and Run of 2 of 56/0.3mm (4.0 Sq.mm) FRLS PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable of makes Ploycab / Havells / Sun Cab / Gold Medal / Million /Fortune Art / Paragon / HPL / L&T / Power Flex / RPG /Anchor / Bonton. with Run 1 of 36/0.3mm(2.5 Sqmm) FRLS PVC insulated 1100Vgrade as perIS:694/1990 specification for Copper cable of makes Ploycab / Havells / Sun Cab / Gold Medal / Million /Fortune Art / Paragon / HPL / L&T / Power Flex / RPG /Anchor / Bonton make including cost and conveyance of all material and labour chages
Supply and fixing 8 way SPN Distribution board with IP-20 protection of make Milltec / Sputnik / Crystal / Bentec/ Gold medal suitable for single phase 40A Double pole Isolator of make Standard / Havells / HPL / Toyoma as incomer and 10kA single pole miniature circuit breakers six numbers (6Nos) as out going with internal connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work.cost and conveyance of all material, all labour charges, and contractor profit etc., complete but excluding VAT.
Supply and Fixing of Batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W LED bulb (for new installation)
Supply, Transportation and Fixing of 1200mm (48") Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings but without Regulator of makes Crompton / Bajaj Kassels 50 / Usha atom make with all standard accessories but without regulator including all labour charges etc., complete including cost and conveyance of all material and labour charges
Supply and fixing of Modular Stepped type Electronic Regulator with Cover Frame with fixing accessories etc., including labour charges complete as required confirming to IS.(independent)
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.1 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters including cost & conveyance of all material, labour charges, etc., complete
Supply and fixing Distribution board with 20A single phase plug and Socket, in sheet steel enclosure with 10/16/20A SP MCB including internal connection and labour charges for surface / flush mounting etc., complete
Supply and Fixing of CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) of Ashirvad / Ajay Flowguard including cost and conveyance of all material, labour charges 28.60 mm OD Pipe - SDR 13.5
Supply and Fixing of CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) of Ashirvad / Ajay Flowguard including cost and conveyance of all material, labour charges 22.20mm OD Pipe - SDR 13.5
Supplying, laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 1524mm (5'0") depth and refilling with watering and tamping.
Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm ( 1'-6" x 1'-6") C.I. frame and cover of 20Kg. including cost and conveyance of all materials to site, all labour charges, for finished item of work.
Supply,fixing of 110 mm dia PVC Floor Traps with Jali 1st Quality ISI Marked conforming to IS:1729-1979 with C P Grating fixing with white cement as per site requirements with standard practice for 100 mm dia Inlet - 75 mm [3"] outlet pipe including cost and conveyance of all materials and labour charges etc., complete for finished item of work
Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock
Supplying & fixing approved make Orissa Pan whiteglazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap: 580 mm x440 mm
Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 10 Litres capacity Single Flush
S&F of 15mm brass body CP finish self closing tap push type conforming to IS 1711 including cost and conveyance of all materials to site, all labour charges complete
Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995
Providing & placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes with all fittings including supply and fixing of 76.20mm dia PVC elbow 1st quality and 38.10mm dia PVC waste pipe outlet including coat and conveyance of all materials all labour charges etc. complete
Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457.2 mm including coat and conveyance of all materials all labour charges etc. complete for finished item of work
Providing & fixing PVC SWR pipes TYPE-B (Single socket 4 Kg/sq.cm - Prince/Sudhakar or any ISI Brand) conforming to IS 13592:1992 including necessary specials,jointing with adhesives ,fixing vertical pipes over wooden battens including cost and conveyance of all materials at site, all taxes etc., complete for finished item of work 90mm dia pipes
Providing & fixing PVC SWR pipes TYPE-B (Single socket 4 Kg/sq.cm - Prince/Sudhakar or any ISI Brand) conforming to IS 13592:1992 including necessary specials,jointing with adhesives ,fixing vertical pipes over wooden battens including cost and conveyance of all materials at site, all taxes etc., complete for finished item of work 75mm dia pipes
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Schedules and BOQ.xlsx
TENDER_DOCUMENT • 0.91 MB
SBD.pdf
TENDER_DOCUMENT • 1.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .