REPAIR MAINTENACE AND POLISHING OF WOODEN FURNITURE AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

SOFA SET 4/5 SEATER FD-281/373:- (a) S&F of cushion foam for sofa set size 525x525x100mm, 32 density (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 300/- per RM

(b) M&L for polishing of sofa set 4 seater with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

(c) M&L for polishing of sofa set 5 seater with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

BED PLY WOOD TOP FD-246/247:- S&F in repair following parts of bed Ply wood top as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. (a) Head rest

(b) Foot Rest

(c) Long rails and shall be made of Ist class hard wood (Shisham)

(d)Short rails and shall be made of Ist class hard wood (Shisham)

(e) Stiffener and shall be made of Ist class hard wood (Shisham)

(f) MS bracket of flat iron 25x3mm,200mm long fixed with screw

(g) Ply wood top 12mm thick BWR plywood as per existing shape and size in One piece

(h) M&L for polishing of bed Plywood top with high class French polish to all exposed surfaces except top & bottom after preparation of surfaces complete all as specified and directed.

CHAIR DINING FD-16(M)/203/ 279 :- S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. (a) Rear Legs

(b) Front Legs

(c) Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(d) Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(e) Bottom stiffener

(f) Back stiffener

(g) M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR WRITING FD-20(M)/202/280:- S&F in repair following part of chair writing with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. (a) Rear legs

(b) Front Legs

(c) Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(d) Front/Back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(e) Bottom stiffener

(f) Back stiffener

(g) Arm rest

(h) M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR EASY FD-17(M)/201/229:- S&F in repairs following parts of the chair easy with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. (a) Rear Legs

(b) Front Legs

(c) Side Rails

(d) Front/Back Rails

(e) Back Stiffener

(f) Bottom Stiffener

(g) Arms rest

(h) M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

REPAIR OF PEG TABLE FD-236/266 /277/384 :- S&F in repair of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly planned as shown on drawing complete all as specified and directed. (a) Legs

(b) Long rail

(c) Short rail

(d) Side stiffener

(e)Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed

(f) M&L for polishing of table Peg with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO TABLE DINING 06/08 PERSON FD-239/269 /273:- S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specified and directed. (a) Taking down old U/S top of table dining 06/08 pers and S&F new top of 18 mm thick pre-laminated patrticle board one side teak face and other side white balancing exterior grade with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed.

(b) Legs

(c) Long rail

(d) Short rail

(e) Stiffener

(f) M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

REPAIR OF TRESTLE STORE ROOM WOODEN FD-141(M):- Repair of following parts of trestle store room wooden as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- (a) Taking out u/s legs of trestle store room wooden, supply and fixing of new leg of size 400mm x 100mm x 100mm of first class teak wood, as per drg

(b) Taking out u/s rails of trestle store room wooden, supply and fixing of new rail of size 2440mm x 100mm x 100mm of first class teak wood, as per drg

(c) Taking out u/s centre stiffener of trestle store room wooden, supply and fixing of new centre stiffener of size 1220mm x 65mm x 100mm of first class teak wood, as per drg

(d)Taking out u/s side stiffener of trestle store room wooden, supply and fixing of new side stiffener of size 1980mm x 65mm x 100mm of first class teak wood, as per drg

(e) M&L for Creosote oiling of trestle store room wooden with creosote oil on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed.

REPAIR OF TEAPOY FD-232/ 278/382 : S&F in repair of the following parts of teapoy with Ist class hard wood (teak) as per existing shape and size duly planned shown on drawing complete all as specified and directed:- (a) Legs

(b) Long rail

(c) Short rail

(d) Side stiffener

(e) Centre stiffener

(f) Top-Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick wood beading all round the top complete all as specified and directed

(g) M&L for polishing of teapoy with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

TABLE WRITING FD-275: S&F in repair to the following parts of table writing with Ist class hard wood(teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.:- (a) Legs

(b) Long rail of table frame

(c) Short rail of table frame

(d) Drawer including chromium plated knob of 40mm Dia

(e) Bottom centre stiffener

(f) Bottom side stiffener.

(g) Taking out old U/S top and S&F new top of pre-laminated particle board one side teak wood face incl 6mm thick teak wood beadging all round top duly high class French polished complete all as shown in drg and directed.

(h) M&L for polishing of table writing with high class French polish on all exposed surfaces except top & bottom incl matching new components with old one after preparation of surfaces complete all as specified and directed.

REPAIR TO TABLE 900mm x 600mm WITH OUT DRAWER FD-231/284:- S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as specified and directed :-(a) Legs

(b) Long Rail

(c) Short Rail

(d) Bottom Side stiffener

(e) Bottom Centre stiffener

(f) Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all around complete all as shown in drg and directed

(g) M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

REPAIR TO TABLE 900mm x 600mm WITH DRAWER FD-283:- S&F in repair of the following parts of table 900mm x 600mm with drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as specified and directed:- (a) Legs

(b) Long Rail

(c) Short Rail

(d) Bottom Side stiffener

(e) Bottom Centre stiffener

(f) Drawer

(g) Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all around complete all as shown in drg and directed

(h) M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

REPAIR OF TABLE DRESSING LADIES FD-32 (M)/ 251:- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- (a) Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

(b) Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size

(c) Removal of old U/S sliding glass and fixing new glass of 3mm thick as per existing.

(d) Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

(e) Removal of old U/S leg of table and fixing new legs of ist class hard wood (teak)

(f) Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size

REPAIR TO SIDE BOARD FD-241 : S&F in repair to the following parts of side board as per existing shape and size duly planned complete all as specified and directed. (a) Top

(b) Bottom

(c) Side

(d) Shelves

(e) Drawer shall be made of 6mm thick commercial plywood with 18mm thick pre-laminated particle board front

(f) Shutter with 40mm size knob

(g) Back shall be made of 6mm thick commercial plywood.

(h) Bottom frame with 4 Nos of legs shall be made of Ist class hard wood (teak)

(j) M&L for polishing of side board with high class French polish on all exposed surfaces except topand bottom incl after preparation of surfaces complete all as specified and directed

REPAIR OF TABLE BED SIDE FD-248 /276: S&F in repair of the following parts of Table Bed Side with 18mm th pre-laminated particle board as per existing shape and size duly planned and wrought finished as shown on drawing complete all as specified and directed: -(a) Top

(b) Side

(c) Shelf

(d) Bottom

(e) Back shall be made of 6mm thick ply wood commercial as per existing shape and size and shown in drgs and directed

(f) Ist class hard wood (teak) 6mm thick beading at front on 18 th pre-laminated particle exposed portion of table bed side

(g) Ist class hard wood (teak) frame with 4 nos of legs duly french polish.

REPAIR TO TABLE CENTRE FD-235/274:-S&F in repair of the following parts of table centre with Ist class wood (teak)As per existing shape and size duly planned as shown on drawing completed all as specified and directed:-(a) Legs

(b) Long rail

(c) Short rail

(d) Side stiffener

(e) Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 4mm thick wood beading all round the top complete all as specified and directed

(f) M&L for polishing of Table Centre with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO TABLE 900mm x 900mm FD-88(M)/ 291:- S&F in repair following parts of the table 900x900mm with Ist class hard wood (teak) as per existing shape and size duly Planned as shown on drawing complete all as specified and directed :- (a) Legs

(b) Long rail

(c) Short rail

(d) Table top of 18/19MM thick pre-laminated particle board one side teak wood face and other side white balancing incl 6mm thick teak wood edging all round complete as shown in drg and directed.

(e) M&L for polishing of table 900x900mm with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed.

REPAIR OF TABLE DRESSING GENTS FD-31 (M)/230:- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- (a) Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

(b) Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size

(c) Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

(d) Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size

CHAIR EASY WITH CUSHION FD-358: - S&F in repairs following parts of the chair easy with cushion with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed :- (a) Rear Legs

(b) Front Legs

(c) Side Rails

(d) Front/Back Rails

(e) Back Stiffener

(f) Bottom Stiffener

(g) Arms rest

(h) S&F of cushion foam for chair easy 28 density 75mm thick (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 300/- per RM

(f) M&L for polishing of chair easy with cushion with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

RE-CANNING OF CHAIRS FD-228,229, 279,280,252,244 :- Taking out old u/s cane from chairs etc and re-canning of wooden chairs, dressing stool,Bin solied linen etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed.

REPAIR TO BENCH WORKSHOP WOODEN FD-301:- S&F in repair of following parts of bench workshop with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specified and directed. (a) Taking down old U/S top of bench workshop wooden and S&F new top of 40mm thick 1st class hard wood complete all as specified and directed.

(b) Removing of old unserviceable drawer and S&F of new drawer made of 6 mm thich plywood complete all as specified and directed.

(c) Legs

(d) Long rails

(e) Short rails

(f) Stiffener

(g) M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

REPAIR OF RIFLE RACK HQ/134/F/22/89:- Repair of following parts of rifle rack as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- (a) Taking out u/s top for hanging the rifle of rifle rack and supply and fixing of new top of first class teak wood, as per drg.

(b) Taking out u/s Base of rifle rack and supply and fixing of new base of first class teak wood, as per drg

(c) M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

CHAIR DINING LONG BACK FD-357:- S&F in repair following part of chair dining long back of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- (a) Rear Legs

(b) Front Legs

(c) Side rail of seat frame

(d) Front/back rails of seat frame

(e) Foam cushioned of 50mm, 28 density with fabric on seat of 12mm thick ply

(f) Foam cushioned of 50mm, 28 density with fabric on back of 12mm thick ply

(g) Bottom stiffener

(h) Nylon buffers on the bottom of legs

(j) M&L for polishing of chair dining long back with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

REPAIR TO TABLE 900mm x 600mm FD-231/284:- S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as specified and directed :- (a) Legs

(b) Long Rail

(c) Short Rail

(d) Bottom Side stiffener

(e) Bottom Centre stiffener

(f) Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all around complete all as shown in drg and directed

(g) M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

Lalit and Brothers

M/S Tanisha Traders

M/S TANUSHREE CONSTRUCTION COMPANY

M/s godara infratech and power industries

SK INDUSTRIES

M/s B. S. Solanki Builders

Narender Constrution Company