Providing electrical power supply for chillers

Amount

Supply, installation, testing & commissioning of 3.5C X400 sqmm, 1.1 KV grade PVC insulated FRLS, ISI mark, stranded/ round wire armoured Aluminium conductor power cables fixed on wall/ coloum/ ceiling or in shaft/existing trench with screws/ coach screws/ anchor fasteners, all other fixing accessories etc. as per instruction of Engg-In-charge.

Supplying & erecting heavy duty flange type brass cable glands for 3.5cx400sqmm cable for end jointing of PVC armoured cable with brass washers, rubber rings complete with cable ends & leads connected, with gland double earthing, work completed in all respect all as per instructions and as directed by E-I-C.

Supplying & erecting crimping type copper lugs confirming to IS suitable for cables up to 240 sq. mm evenly crimped with high pressure tools & connected to switch gear terminals with brass/ cadmium plated nut bolts in an approved manners. all as directed by O-I-C, ES

Supplying & erecting crimping type copper lugs confirming to IS suitable for cables up to 400 sq. mm evenly crimped with high pressure tools & connected to switch gear terminals with brass/ cadmium plated nut bolts in an approved manners. all as directed by O-I-C, ES

Supply, Installation, Testing and commissioning of Earthing with COPPER earth plate 600 mm x 600 mm x 3.15 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7mtr long etc with charcoal or coke and salt as required.

Supply& laying 25 mm x 3 mm COPPER strip on surface with necessary fixing arrangements for connections to chiller panel as required.

Supply ,Installation,Testing & Commisioning of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 750 mm width & 75 mm height complete with necessary coupler plates, support from ceiling, hardware , making cut-outs in wall & finishing of the same in approved manner.

Design, Supply, Unloading, Handling, Shifting to the location, Reassembling, installation, testing, commissioning of extension panel having 2500A, MDO type ACB with microprocessor based LSI release, MFM, CT, ON-OFF TRIP indication lamp. Panel shall be indoor type with IP-52 degree of protection, made out of 14/16 swg CRCA Sheet steel, floor mounted, top horizontal busbar, cable entry from top, painting with seven tank prosses matching to existing colour shed, horizontal bas bar of existing size, earthing terminal, etc.

kokan electrical works

OM POWER SYSTEMS

DQBYDT PVT LTD

M. L.LABADE ENGINEER & CONTRACTOR