Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
Closing Date
19 May 2021, 4:00 pmClosed
Executive Engineer
Executive Engineer Jal Shakti PHE Mechanical Division (South) Awantipora
Design Supply installation testing and commissioning including 5 year operation and maintenance for 4000 GPH 18000 Ltrs Hr Iron Removal Plant with all allied works at Water Supply Scheme Gundipora.
2021_PHE_123206_2
awantipora 01
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
60 days
awantipora
Design Supply installation testing and commissioning including 5 year operation and maintenance for 4000 GPH 18000 Ltrs Hr Iron Removal Plant with all allied works at Water Supply Scheme Gundipora.
2 documents required · 2 mandatory
₹500
Yes
Executive Engineer
Exempted
9 Jun 2021
27 Apr 2021
21 May 2021
27 Apr 2021
19 May 2021
27 Apr 2021
Amount
Design, Supply, installation & commissioning including 5 years operation & maintenance for 18000 LPH Iron Removal Plant with all allied works at Water Supply Scheme Reshipora Uller with following general specifications here as under Source-Tube well Iron content in mg / litre – 3 Filtration Capacity – 18000 Litres per hour Quantity of water to be filtrated / day – 180000 Litres Operational Hours – 10 as par annexure A
Consumables/ Operation & maintenance/The contractor shall provide all the material such as filter media, oxidising media, chemicals, disinfecting chemicals lubricants, pipe breakage (if any) replacements as required for smooth operation of the plant for a period of 5 years. The contract shall include all kinds of consumables required for smooth operation for a period of 05 years which shall be borne by the contractor and have to be supplied and fitted/installed by the contractor from time to time and as and when required.As par annexure A
P/F of Chemical dosing Pump to dose chemical to replace damaged one as per the following specifications : Discharge max. Capacity : 0-20 L/Hr. Max. Pressure: 3 Bar , 300000 N/Sq.Mtr , 300000 Pa,/ 300 Kpa /0.3 MPA / 3.058 Kg/ SQ.CM Make : Cheonsei / Milton ray Metering pump./ Minimax. Frequency : 50/60 Hz. Power : 14 Watt , Single Phase AC220-230 V , 0.08/0.60 A / as per above parameters. The Job includes P/F of suction and delivery flexible pipes complete with strainer in suction side and delivery pipe shall have to be fitted with MS Delivery pipe line going to OHT. The Job also includes P/F of 200 Ltrs capacity of PVC container complete with Top Cover of Sintex make. alongwith wooden base to be fitted at top of the tank complete with nuts and bolts for fitting of dosing pumps. The Job includes Providing of one NO. Plastic container 20 LTR Capacity of Simrudi make for preparation of liquid chlorine. AS par Anexure A
Civil Works.A Foundation and plinth 15 ‘ x 10’ size a) .Earth excavation for foundation/trenches in all kinds of soil including leads and lifts. As par annexure A
Providing/fitting/fabrication of vertical posts to be fabricated out of ISA(50*50) 5 mm thick of about approx 12 feet long with two feet embedded in RCC block for each length. The job includes cutting, welding, hoisting etc as per site requirement. As par annexure A
Providing fitting and fabrication of inclined Truss to be fabricated out of ISA 50*50 5mm thick angle iron as follows. As par Annexure A
Providing and fitting of CGI sheeting of 24 SWG gauge along with P/F of j-hooks with nuts and plane sheeting for whole shed including gables etc. 2’6” x 8’ x 16 No.
Painting of whole shed with one coat of red oxide and two coats of enamel paint after through surface cleaning by using proper grade of emery paper.
Providing installation testing and commissioning of area lighting 48 Watt LED (Street Light Type)on brackets to be installed on walls. Input: 90-240 V 50 Hz Power Factor: >0.9 Colour Temperature: 4K - 6.5K Beam Angle: 120˚ - 170˚ Lumens: >12000 Operating Temperature: -20˚C to 60˚C The LED shall have pressure die cast aluminium housing with power coated finish and having Ingress Protection up to IP-68. The LED shall be properly fitted on the arm of the pole/wall and connected to the2.5mm copper wire & suitable MCB . Job includes all types of mounting & accessories required as per site requirement. Makes: SYSKA SSKSL-, or equivalent in Havel’s
MICROPLUS TECHNOLOGY
MAGNI ENGINEERS PVT LTD
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .