PROVN OF ADM STORE BEHIND BLDG NO P-78 PROVN FOR PARKING OF 03XALS FOR LOADING, UNLOADING OF AMN NEAR BLDG NO P-290, PROVN OF EFS STORE NEAR BLDG NO T-745, PROVN OF VEH SHED, COVERED PATHWAY FROM BLDG NO T-650 TO T-610 AT PEDONG UNDER GE 867 EWS

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, n.exc. 1.5m wide and n.exc 1.5 m in depth; for foundation, etc. and getting out in hard/dense soil.

M&L PCC (1:4:8) Type C2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks, exc. 10 cm in width type C-1 (1:3:6) (using 20mm grade stone agg) set in cement mortor 1:6 complete all as specified and directed.

M & L for Damp Proof Course in cement mortar 1:2 , 20 mm thick with using water proofing compound 3% by weight of cement including necessary formwork complete all as specified and directed.

Supply of integral water proofing compound .

Returning ,filling in, including, spreading, levelling, watering and well ramming in layers not exc 25cm in hard / dense soil complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and directed.

M&L broken stone or bounders hardcore of gauge n exc. 63 mm , deposited, spread and levelled in layers n exc. 15 cm thick , watered and rammed to a floor/true surface complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) Type D2 (using 40 mm graded aggregate) as in sub base complete all as specified and directed.

M&L 40mm thick PCC type B-1, (1:2:4) (using 20mm graded stone agg) as in floor complete all as specified and as directed.

M&L 38mm wide glass dividing strips 3mm thick as in floors.

M&L for glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

S & F 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F 15 mm bore tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for Glass dividing strips of 38mm width, 3 mm thick as in floor complete all as specified and directed.

M&L for brick work with Fly ash' bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L Hardcore of broken stones gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 150 mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base or sub floors finishing the surfaces even and rough to receive the topping layer complete all as specified and directed.

M & L for providing 100 mm thick cement concrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in path, hardstanding laid in alternative panels with and including use and waste of form work and to divide the area in panels and finishing surface of concrete by brooming complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:4) on external surfaces of wall finished even and fair complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:4) with wpc on external surfaces of wall finished even and fair complete all as specified and directed. [Note : Water proofing compound will be measured and paid separately]

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:6) on internal surfaces of wall finished even and fair complete all as specified and directed.

M & L for preparing new surface, two coats of cement base paint over a coat of alkali resistant primer on external walls incl watering etc complete all as specified and directed.

M & L for preparatio new surfacesand applyiny three coat of white wash on internal walls complete all as specified and directed.

S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A) complete all as specified and directed.

S&F mild steel work as in tubular pipes including necessary welding or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F Pre-painted galvatume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of Ist grade enamel paint over a coate of red oxide primer zinc chrome complete all as specified and directed.

S&F framed work as in door or gates of angle or other section with gusswt plates, rails, braces,etc. complete drilled for fixingof steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-410W9Gde E-250)quality- B complete all as specified and directed.

M&L for 1.6mm thick MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

Supply only 375 mm long MS sliding door bolts, bolt type, stove enamelled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply only 150 mm size MS Pressed handle, oval type, stove enamelled black and fixed complete all as specified and directed.

S&F Pressed steel frames of size 125x60 mm for door with one or more rebates including necessary fixing lugs, butt hings, lock strike plate etc., complete all as specified and directed.

S & F 30mm thick flush door shutters , solid core construction with black board core and plywood face panels,commercial type on both face complete all as specifiedhard & fitted to chowkats complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed complete all as specified and directed by Engineer-in-Charge.

S & F 150mm size aluminium handle cast type anodised complete all as specified and directed by Engineer-in-Charge.

M&L prepration of newly wooden surfaces of any description & applying two coats of synthetic enamel paints over one coat of pink primer incl prepration of surfaces complete all as specified and directed by Engineer-in-Charge.

S & F steel windows for glazed with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

S&F steel ventilator with top hung shutter fixed type including hinges, steel peg stay, complete complete all as specified and directed.

S & F Framed work such as grills framed guard bars etc confiring to Ge 290 , 10 mm sq bar for guard bars complete all as specified and directed.

M & L 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane omplete all as specified and directed.

M & L RCC, (nominal mix) type B-1, (1:2:4) (20mm graded stone aggt) in lintels bands, cills and similar works all as directed by Engineer-in-Charge.

M & L RCC, (nominal mix) type B-1, (1:2:4) (20mm graded stone aggt) in slabs sopported in walls, beams and colmns in floors, roofs landings balconies, canopies, deck slabsand in shelves and similar works etc all as directed by Engineer-in-Charge.

M & L mild steel TMT Bars 10 mm and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed) not less that 0.90 mm dia or securing with chip omplete all as specified and directed.

M & L mild steel TMT Bars 5mm dia and over upto and incl 10mm dia in stirrups, spacer and binders cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed) not less that 0.90 mm dia or securing with chip complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, lintels, cantilivers , shelves including suports, overhangs etc . Also splays between floor and beams etc omplete all as specified and directed.

M&L 75 mm thick PCC type C-2, (1:3:6) (40mm graded stone aggt) as in path, plinth protection etc., complete all as specified and as directed.

Forming construction joint (dummy) joints 65mm deepx 10mm wide filled with sealing compound grade A complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Material & Labour for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Punned layers shall be measured.

Supply & laying reinforced precast concrete cable cover, class LV, type 1, flat, size 250x150x40mm complete all as specified and as directed by Engr-in-Charge.

Supply and laying. jointing, testing and commissioning LT cable, XLPE insulated, PVC Bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor conforming to IS:7098, cross sectional area 10 sq mm 2 core 1100 Volt complete all as specified and directed by Engineer in charge. Make-Havells/Asian/Gloster

Material & Labour for GI tubing light grade for passing through cables under the floor along the wall or along the pole of 25mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and bolts/washers etc all as specified and as directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S & F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing capping not less than 20mm size, with all necessary fittings for light/fan/bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated backlite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per item No 61 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.

All as per item No 61 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on same board.

M&L for one 3 pin socket, outlet,15 amps, independent with cables 4 sq mm size all as specified and as directed.

All as per item No above but for one switch socket outlet 15 Amps on independent board with 2.5 sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and directed.

Supply and fix switch socket combination 2 – in – one, 5 amps flush type all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fix switch socket combination 3 Pin 16A, flush type all as specified and as directed. Make : Anchor/Havells/Plaza

S & F switch socket combination 2-in-one, 6 pin, 5 /15 Amps flush type universal all as specified and as directed. Make : Anchor /Havells / Plaza

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.Make : Anchor/Havells/Plaza

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. Make : Anchor/Havells/Plaza

Supply & Fixing Energy efficient LED tube light fitting 4", 1x18 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 1800lm, aluminium housing, surge protection range 3KV including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge. Make: Philips/Crompton/Havells.

S & F Energy efficient LED tube light fitting 4'',1x20 watt, with bipin holders, connector block, CCT-6500K, system output lumen not less than 1800 lumen, aluminium housing, surge protection range 3KV including connecting up with PVC insulated 3 core sheathed 0.5 sq mm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge. Make : Philips / Havells / Crompton / Luker

Supply & Fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Philips/Crompton/Havells.

Supply and fixing lamp holder insulated body with back plate for batten fitting complete all as specified and directed. Make: Philips/Crompton/Havells.

Supply & Fixing in LED lamp B-22 10W poly carbonate body 3 star (cat part No LED ADORE 10W B22 CDL 3 star of Havells) Make: Philips/Crompton/Havells.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC complete all as specified and as directed by Engineer-in-charge. Make : Legrand or equivalent in Siemens/Schneider/HPL.

S & F MCB, single pole & Neutral (SPN), 40-63 Amps, 240 V , 10 KA 'C' curve, 50 Hz, complete all as specified and directed by Engineer-in-charge. Make : Legrand or equivalent in Siemens / Schneider / HPL

S & F MCB single pole (SP), 10KA of 5 Amps to 32 Amps capacity 240V, conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection all as specified and directed. Make : Legrand or equivalent in Siemens / Schneider / HPL

Supply and fix MCB, Single Pole & Neutral (SPN), 32 Amps, 240V, 10KA 'C' curve, 50 Hz, complete all as specified and directed by Engr-in-Charge. Make- Legrand, Siemens, Schneider.

Supply and fix MCB, Single Pole & Neutral (SPN), 40 Amps, 240V, 10KA 'C' curve, 50 Hz, complete all as specified and directed by Engr-in-Charge. Make- Legrand, Siemens, Schneider.

Supply and fix MCB single pole (SP), 10 kA of 5 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection all as specified and directed by Engr-in-Charge. Make- Legrand, Siemens, Schneider.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1: 3:6) type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

C. M. AGARWAL AND CO

MS BRAHMA CONSTRUCTION

MS MAYA PRAKASH GOEL AND SONS

JAYSHREE CONCERN

GEETA CONSTRUCTION

SANJAY MITTAL

MANOJ JINDAL