Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC FLAT NO 04 3RD FLOOR HARI BHAVAN PLOT NO 44 MAHANT ROAD VILLES PARLE EAST MUMBAI 400057 | MUMBAI SUBURBAN | MAHARASHTRA | 400057 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹39.5 L+₹1.4 L (3.60%)Rejected-Finance | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹40.9 L+₹2.8 L (7.21%)Rejected-Finance MHN 284 DRIVER HILL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹41.9 L+₹3.7 L (9.65%)Rejected-Finance | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹44.6 L+₹6.4 L (16.8%)Rejected-Finance | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹49.8 L
EMD Value
₹99,600
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI BIJENDRA SHARMA IDSE EE
GARRISON ENGINEER (NW) VASCO Opposite KV No.2, School, Shantinagar, Vasco-Da-Gama, Goa-403802
8423/22/E8
2022_MES_508510_3
8423/22/E8
Open Tender
Civil Works
Item Rate
180 days
VASCO
Class D Category a i
9 documents required · 9 mandatory
₹500
Yes
GE NW VASCO
₹99,600
Yes
10 Aug 2022
14 Jul 2022
29 Jul 2022
14 Jul 2022
27 Jul 2022
21 Jul 2022
14 Jul 2022 - 20 Jul 2022
60 days
Amount
ESSENTIAL SERVICES TO VACATED QTRS BEFORE REALLOTTMENT AT VARUNAPURI – I, II, III AND MAP AREA UNDER AGE B/R II OF GE (NW) VASCO
M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint.
M&L for preparation of old plastered surface on ceiling and applying one coat of OBD.
M&L for preparation of old painted surfaces of wall and applying one coat of oil boud distemper.
Taking down cement plastering of any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.
M & L Rendering 5 mm thick in CM 1:3 on ceiling/ soffits of slab, including finishing the surface even and smooth without using extra cement all as specified.
M&L for 10mm thick plaster in CM (1:6) finished to even & smooth w/o using extra cement.
Preparing newly plastered surfaces of wall and applying two coats of Oil bound distemper over a coat of alkali resistant primer.
Preparing newly plastered surfaces of wall and applying two coats Oil bound distemper in ceiling
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (Ist quality)
All as per item No. 1.09 above but on steel surfaces
M&L rendering 10mm thick in CM 1:4 on brick work/ concrete surface to receive tiles
M&L screed bed or bedding layer of mortar 15mm thick to rceive floor tiles in cement plaster 1:4
S & F glazed ceramic tiles, coloured of size 300 x 200 x 7 mm thick with on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement to match all as specified.
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.
M & L for Granite or marble (Baroda green) work (table rubbed and polished) 18-20mm in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L CPVC pipes SDR 11 Class 1 laid in trenches/walls outer dia 20mm dia including all fittings
M&L CPVC pipes SDR 11 Class 1 laid in trenches/walls outer dia 25mm dia including all fittings
Taking down steel tubing/CPVC Tubing & connections 15 mm bore and removing from the site.
Taking down steel tubing/CPVC Tubing & connections 20 mm bore and removing from the site.
S&F sheet glass ordinery quality, 4mm thick and glazing with oil putty/wooden beads in squars n exc 0.5 sqm each.
All as per item No 1.21 above but exc 0.5 sqm each pan.
All as per item No 1.21 above but with pin headed/figured glass.
S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and avg width of aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire staples as ordered.
Taking down chowkat/frame with shutters n exc 1.5 Sqm (without taking off shutters from the frame)
All as in item No. 1.25 above but exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking off shutters from the frame)
Taking down shutters only exc 1 Sqm n exc 2 Sqm Each
Taking down shutter of any description n exc 1 sqm each.
M&L for II nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
M&L for Factory made Plain framed, panelled shutter 35mm thick (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.
M&L Factory Made IInd class hard wood and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in position as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rain & bottom rail panelling of plain gap insert for top rail & bottom rail paneling of plain color PVC sheet to be fitted in the MS frame selded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.
M&L 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in repair.
M&L for 2nd class hardwood plain fillet, square, rectangular or triangular in sectional area exc 3sqcm but n exc 6sqcm clean sawn, secured with nails or brands.
S&F 30mm wide flaps brass continous (piano) hinges
S&F mild steel work as in bands, straps, clamps, hold fasts and similar small articles conforming to Fe-290 (Gde E-165) complete all as specified and as directed.
M&L for providing plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in bed blocks for hold fasts, roof kerbs or mud stops, rounded or chamfered on edges etc, including weathering, slightly rounded or chamfered angles and throating as directed.
S&F aluminium anodised barrel tower bolts of extruded section 100mm long.
S&F aluminium anodised barrel tower bolts of extruded sectin 150mm long.
S&F extruded aluminium alloy, fabricated type handle, anodised 100mm long
S&F extruded aluminium alloy, fabricated type handle, anodised 150mm long
S&F Powder coated aluminium sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.
M&L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete
S & F in repair Hasp & staple, safety type of Alu Powder coated 125mm
S & F PVC connections, 450 mm long with brass CP check nuts suitable for connecting 15 mm dia pip[es, superior quality, fixed in repairs.
S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm.
S&F PVC waste pipe 32mm/40mm dia for wash basin and kitchen sink fixed in repairs.
S&F viterous china wash hand basin, white, flat back, size 600X480 mm white, excluding taps, waste pi, chain and plug and porcelain stopper but including brackets fixed in repairs
Supply & Fix WC of size 580 x 440 mm vitreous china squatting pan, Orissa pattern white with "P" or "S" trap front or back inlet and integrated foot rest including provn of lime concrete bedding etc fixed in repairs.
S & F PVC high level /low level flushing cistern, 10 Ltrs capacity including float valve, chain, PVC pipe including dismantling of old unserviceable flush tank in repair.
S & F 15mm dia bib taps standard of PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) fixed in repairs.
Supply only Pillar tap of PTMT 15mm dia any colour high pressure screwed for iron/CPVC pipe fixed to new wash hand basin .
S&F in repairs Pillar taps of PTMT 15mm dia any colour high pressure screwed for iron pipe and fixed.
S &F 15mm stop valves PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) fixed in repairs .
M&L waste coupling of PTMT 32mm/40mm bore fixed in repairs
S & F PTMT grating dome 125 mm dia with waste holes in repairs
S & F 15mm dia angular stop cock standard of PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) fixed in repairs.
S&F Shower rose with shower arm 195mm long of PTMT any colour, for fixing to CPVC/steel pipe of 15mm bore fixed in repairs complete all as specified.
M&L in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm
S&F floor door stopper of aluminium alloy body with rubber shoe 75mm long in repairs.
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with aluminium wire staples to wooden/steel window/ ventilator shutters fixed in repairs.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
M&L figured glass 3mm tick ordinary quality glazing with oil putty in squares not exc 0.5 Sqm in each pane.
M&L Painting to new wooden and wood based surfaces of any description not otherwise described over 10 cm width or girth. Two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.
Dismantling existing water tank of 1000 Ltrs capacity and removing to store.
Dismantling existing water tank of 500 Ltrs capacity and removing to store.
S&F rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltr capacity.
S&F rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltr capacity.
S&F SS curtain rails 19mm dia with brackets stop rollers etc fixed in repairs.
S&F in repair brass CP mixter 15mm dia for mixing hot & cold water screwed down for iron pipe/ PVC pipe
Cleaning of storage water tank of PVC/HDPE exc. 250 ltrs but n. exc 500 ltr capacity staged over RCC roof/floor slab or similar place inside /outside bldgs by removing float valves carefully, thoroughly cleaning the wall, floor and ceiling of the tanks, mouth of pipe etc, removing the dirty water, sludge and other depositions to a distance not exceeding 50 mtr to make the tank totally dirtfree and finally cleaning the water tank with fresh water till water becomes clear to entire satisfaction of Eng-in-Charge and as specified in particular specification and refixing of float valves all as specified and directed
All as per item No. 1.72 above but n exc 250 Ltr (Loft tank).
All as per item No. 1.72 above but water tank of capacity exc 500 ltr but n. exc 1000 ltrs
S&F SS Butt hinges medium weight cold rolled 100mm size.
S&F aluminium powder coated window/ventilators shutter including frame, any type (sliding or openable) with frame, & other similar work etc. fabricated by using the JINDAL/HINDAL CO/CENTURY standard section including necessary arrangements to receive 4mm thick glass or wire mesh with aluminium chanel beading & stainless steel screws including the cost of rubber gasket/rubber beading etc. complete including necessary handles, roller wheels, hinges etc complete all as specified and as directed. (Note :- Wt of aluminium shall be measured exclusive of all fittings fixtures, hinges, handle, bolts, rubber gasket/rubber beading and locking arrangements.)
S&F powder coated aluminium grill of make DG 104 (10mm thick) with DL 102 frame.
S &F in repair 200 Ltr capacity PVC loft tank of rectangular type suitable to fix in kitchen.
S& F PVC water tank covers circular type with suitable nut and bolts complete for water tanks of 500 to 2000 ltr capacity all as specified and as directed.
S&F PVC waste pipe 32mm/40mm dia for wash basin and kitchen sink fixed in repairs.
Treating and finishing the sunken portion of WC area not exceeding 1.2 Sqm each by providing 10mm thick rendering in cm 1:3 with and including water proofing compound and applying two coats of bitumen 85/25 @ 1.25 kg/sqm, providing necessary connection items suitable for WC, providing lime concrete and 1mm thick multiplus plastifelt over 20mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed trap stone aggregate complete all as directed.
All as per item No 1.81 above but for bath/lobby with out any PVC connections/fitting, area exc 1.2 Sqm and n. exc 2 Sqm each.
S&F in repairs CP Jet spray/Health faucet complete all as specified
M&L in repairs stainless steel 1mm thick plate rack of size 600mm x 750mm including fixing in walls with suitable screws wooden plugs including all necessary arrangement etc all as specified and as directed.
S&F in repairs 20mm, 600mm long brass chromium plated towel rail all as specified and as directed.
Dismantling boarding, any description, fixed in any position with nails.
M&L for PVC kitchen Cabinet (18 mm PVC one side prelaminated sheets of Rajshri Plastiwood) complete as directed by Engineer in Charge.
M&L for PVC kitchen Cabinet 18 mm PVC both side plain sheets of Rajshri Plastiwood complete as directed by Engineer in Charge.
S&F Aluminium (extruded section) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed in repairs.
S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm®
PREMONSOON MAINT TO BLDGS AT VARUNAPURI – I, II, III, MAP AREA & MES ESTABLISHMENTS UNDER AGE B/R II OF GE (NW) VASCO.
Dismantling of plain corrugated steel sheeting any thickness including similar pattern roof coverings.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified & directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F mild steel framed work such as grills, gratings etc with ends of bars framed guard bars barred iron doors ladders framed balusters walkways railing framework of watertank and similar work conforming to Fe-290 (Gde E-265) complete all as specified & directed.
M & L for rolled mild steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc; conforming to Fe 410-W(Gde-E- 250)
M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of any description, over 10 cm in width or girth Complete all as Specified..
Dismantling/taking out exisisting hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismatled debris to a distance exc 200m & n exc 250m complete all as specified and as directed.
Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required, reconnecting and refixing in position upto 1000 Ltr capacity complete all as specified and as directed.
M&L APP based polymeric membrane minimum veight 3kg/sqm and minimum 3mm thick reinforced with polyster non- woven fabric (wt. not less than 150gms/sqm) laid on primed surface by torch application method with minimum side overlap 100mm and 150mm as end lap over roofs after cleaning the surfaces properly with water and allowed to dry completely including priming surfaces for applying normal treatment complete all as specified and as directed.
M & L rendering 10mm thick (avg) on concrete surfaces over roof slabs, in cement mortar 1:4,mixed with liquid water proofing compound, finished even and smooth without using extra cement, to receive roof treatment complete all as specified and as directed. (Note: - water proofing compound shall be measured and paid saperately)
M&L for application of bond coat using "Epoxy bonding agent" on prepaired surface, when bond coat becomes tacky apply repair mortar (using universal polymerised repair mortars single pack like Pagel U40 or Microconcrete) at a thickness upto 15mm as per manufacturers instruction and as directed for application of roof treatment. Make : M/s Pidilite Industrues Ltd or Eqult in M/S Krishna Conchen Products/ STP Ltd. Note: Application to be done by authorised applicators only.
M&L for preparation of surface with wire brush and remove loose particle & laitance, wash with clean water, damaged or hollow portion, sharp edges etc. must be cut and removed till the morther slab, filling the crack upto 2mm wide with Dr. Fixit Crack X or equivalent, maintaining a suitable slope for water drainage and reinstate damaged portion with polymer modified mortar as recommended and allow it to cure for 24 hrs. Brush apply the 1st Priming coat on prepared concrete/ plastered surface and allow to dry for 04 (four) hours. Apply the first coat of waterproofing coating over the primed surface. On the wet surface of 1st coat overlay a open-woven fibre glass mesh, min 40 GSM of size 2mm x 2mm and allow it to soak completly. Immediately apply the second coat with a roller, to eusure complete coverage of the fibre mesh. Apply the third coat after 6 to 8 hrs once the second coat is dry. Drying time between coats will be 6 to 8 hours all as directed and as per manufacturers instructions. Make: M/s Pidilite Industrues Ltd or Eqult in M/S Krishna Conchen Products/ STP Ltd. Note: Crack filler, priming coat and water proofing coat used shall be of same Make/Manufacturer. The rate includes crack filling, minor repair reqd for making the surface smooth. Repair mortar for damaged portion will be paid separately.
Supply only liquid waterproofing compound.
Rendering 15mm thick plaster in cement mortar 1:4 in two coats (10 mm thick backing coat + 5mm thick finishing coat) finished even and smooth without using extra cement including water proofing compound (Dr. fixit LW or equivalent 200ML per bag of cement) etc complete all as specified and directed.
M & L preparation of newly plastered surface and applying two coat of raincoat. Prime the surface with a coat of PRIMESEAL diluted with potable water in ration 2:1 by volume prior to application of raincoat and allow it to dry for 2 to 3 hrs. Apply first coat of raincoat. Apply second coat of raincoat with an interval of 5 to 6 hrs and allow to cure for 7 days all as directed and as per manufactures instruction. Make: M/S Pidilite Industries Ltd or Equivalent in M/S Krishana conchen product/STP Ltd Note:- Priming coat and raincoat used shall be same Make/Manufactures.
M & L preparing newly plasterd surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.
M & L preparing the old treated surfaces of wall and applying one coat of exterior grade weather proof antifungal paint complete all as per manufacturers instructions and as directed
M&L preparing damaged chajja, drop, roof projections etc and providing PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) with use and waste of necessary form work & finally plastering the surfaces with 10 mm thick rendering in CM 1:4 complete all as specified and as directed.
Taking down PVC (SWR) pipes 75/110mm from walls including fittings.
M&L UPVC pipe, 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.
All as per serial item No. 2.21 here-in-before, but UPVC (SWR) pipe 110mm bore .
S & F UPVC (SWR) bends, diminishing pieces or tapers, 75mm bore, any radius,
All as per serial item No. 2.23 here-in-before, but 110mm bore
S & F UPVC (SWR) branch piece, single, (Single Y), equal or unequal with access door, 75 mm bore size all as specified and as directed.
S & F UPVC (SWR) branch piece, single, (Single Y), equal or unequal with access door,110mm bore size all as specified and as directed.
S & F UPVC (SWR) branch piece, double, (double Y), equal or unequal with access door, 75mm bore size all as specified and as directed.
S & F UPVC (SWR) branch piece, double, (double Y), equal or unequal with access door, 110 mm bore size all as specified and as directed.
S & F 110 mm dia UPVC (SWR) vent cowl all as specified and as directed.
S & F UPVC (SWR) gully trap 125/110mm, setting and jointing with siolvent cement all as specified and as directed.
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .