Landscape, Open Gym, Kids Play Equipment, Fountain, other beatufication work and O and M at Ranjeet Nagar E Zone

Amount

Landscape Development Supply & planting of different varities of ornamental plants in polyethyiene bags/earthen pots according to height & age of the plant at site, loading, unloading & transportation etc complete Cucus revoluta 3 ft ht. with thick trunk.

…do...Bottle Palam 8-10 feet ht.

…do...Ashoka Pendula 8-10 feet ht.

…do...Foxtail Palam 8-10 feet ht.

…do...Fishtail Palam 8-10 feet ht.

…do...Shampane Palam 5-6 feet ht.

ORNAMENTAL ITEMS Construction of " HUT/ Gajebo/" as per following specification and enclosed photograph. - Circular platform at ground level having overall dia not less than 7.66 Mtr. annular shape footpath. - Plinth Level area 17 Sqm (dia. of circular platform not less than 4.66 Mtr.).- Plinth height 0.60Mtr. from ground level should be in three equal steps having rise 15cm with one side gentle slope ramp having width 1.0Mtr. and with side railing. - Ist roof level height should be not less than 3Mtr. from plinth level.- Total Covered area of Ist roof level not less than 21.50 Sqm.- Roof should be made in frustum of cone shape having frustum height 0.60Mtr. and thickness of roof slab should not be less than 0.125Mtr.- 2nd roof should be made not less than 2.0Mtr. dia. at bottom with 0.60Mtr. cone height at center.- Difference of level between both roofs should be not less than 1 Mtr.- Minimum 6 Nos. R.C.C. (M-20) circular columns having dia 0.23Mtr.with required reinforcement from plinth level to support Ist roof level having load bearing capacity of both roofs with required foundation.- The "Hut" should be facilitated with 1No. round sitting bench of 0.45Mtr. width and 0.10Mtr. thick should be made in R.C.C. of M-20.- R.C.C. work should be complete in M-20 with required reinforcement (not less than minimum) as per relevant IS code. All work should be ornamental and having natural look of wooden finishing with ornamental plaster in rich mortar, using white cement oxide color and bamboo/balli design with final finishing in touchwood color (two or more coats) as per photograph enclosed. With giving asthetic look. The job work should be complete as per direction of engineer incharge and upto satisfaction of engineer incharge .

Making of railing as per following Specifaion desing 2. Nos. vertical pole should be made in 1.0 mtr Distance & 1.0 Mtr. Height and also of 3" thikness. 2 Nos. cross pole should be made per above specification.1 Nos. horizontal pole should be use made on top side as per above specification3 Nos. 8mm size bars should be use every pole with 6 nos. ringhs of 4m. G.I. Wire.The Stainless steel murga jhali should be fixed with every pole for C.C. Work. All poles should be complete by 1:1:2 R.C.C. Mixture The Plaster work should be complete by 1:2 mortar of not less than 12 mm thick. Finishing work should be complete by white cement oxide colours as per direction & made the pillar in Bally or Bamboo desing or as per deriction after finishing work should be done two couts of touch wood.Work should be done as per direction of incharge

Decoration & Desing of the wall by ornamental woodmarking art in cement Mortar 1:2 by using various colour chemicals cement and others material, witch look as wood made as per site requirement and as per enclose desing and following detal complete in all respect as per direction and following detal complete in all respect as per deriction of in charge as per approved pattern and desing by using colourchemicals ect.

S/F FOUR SEATER MGR :- As per following Specification :- Rec. Age 3-8 yrs The area - 1.5 m dia safe play area - 2.5 m dia The item is having its main frame made up of 20 & 40 NB GI pipes the stand is made in 80 NB GI pipe. The whole stracture is mounted on heavy duty bearing shaft. The bearing used is of heavy duty bearing permanently lubricated with water sealant The seat frame is made in 20 NB GI pipes. The seats attached area made out of molded plastic type in rotational molding process in LLDP the seats have handrails so that the child does not fall. it accomodates 4 children at a time

Providing & Installation its equivalent WAVE SLIDE recommended age 4 to 12 year , required area 4.8 X 0.5m & safe Play area 5.8 x 1.5m . The Platform Heightis 2.1m the chute is made up of 4mm thick FRP. The slide lenth is 3.0m. The ladder Frame is 25mm NB pipe . the handrail is made up of 20mm nb pipe . the step width is 75mm . the support structure is made up of 25mm NB pipe “B” class class complete as per manufactures specifications & As per Direction Of In charge .

SEE SAW : Providing and installation of Arihant Playtime or equivalent MULTI SEATER SEE SAW with over all covering area 3.0m x0.9 with safe play area 4.0mx1.5m and height formthe ground level 0.5m level is made up of 80 NB “B” class GI ISI marked pipe, Column stand is made up of 50 NB “B” class GI ISI marked pipe. Seat is made up of moulded plastic the painting and fabrication shall be as per annex. Attached as per specification. As per direction of the eng. In charge

S/F OF FOUR SEATER ARCH SWING :- As per following specification :- Rec. Age 4-14 yrs The area 6.0m x 1.5m safe play area - 7m x 3.5m As the name suggests 04 children can enjoy the swing at one time. The arched shaped side frame is made of 80 NB GI pipes and top pipe is made up of 10 mm thick anti skid chequerd reinforced rubber top the rubber belt seat is suspended on 6mm rubber coated GI chain. The ball bearing are mounted inside a specially designed nylon clamp.

CHEST PRESS • DIMENSIONS: -1500mm (Length) x 500mm (Width) x 1500mm. (Height). • SAFE AREA: - 2.0Mtr x 1.Mtr. • Chest press equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters.The powder coating done with Pure Polyester powders

Cross Trainer DIMENSIONS: - 1000mm (Length) x 400mm (Width) x 1250mm. (Height). • SAFE AREA: - 1 x 1.2Mtr.

Surf Board DIMENSIONS: -700mm (Length) x 560mm (Width) x 1000mm.(Height). • Safe Area:-1.39 x 1.27Mtr

Seated Puller • DIMENSIONS: - 1500mm (Length) x 540mm (Width) x 1520mm. (Height). • SAFE AREA:- 1.2Mtr x 3Mtr

Double Twister Standing DIMENSIONS: - 1200mm (Length) x 500mm (Width) x 1000mm. (Height). • SAFE AREA: - 2.5Mtr.X 1.5Mtr

Air Walker • DIMENSIONS :- 800mm (Length) x 610mm (Width) x 1200mm. (Height). • SAFE AREA: - 2.0 Meter x 1.8 Meter

Thaichi Spinner 2 Wheel DIMENSIONS: - 500mm (Length) x 800mm (Width) x 880mm (Height). • Safe Area:- 1.9Mtr X 1.9Mtr

Fountain Supply and fixing Glass Mosaic tiles of 20 X 20 X 4 mm size of approved shade and design with required adhesive over bed of 15 mm thick cement, sand mortar 1:3 including nicely finished joints. Thickness of joints shall not be more than 1.5mm using water proof joints filler (as recommended by manufacture) & finished with flush pointing in white cement mixed with pigment to match the shade of tiles. Complete work as required in all respect.

Designing, supply, erection, commissioning and testing of ring type Dome fountain which shall contain the following specifications. 1 The Fountain Shall Contain a ring of 10ft dia with 62 nos. brass made nozzles. The nozzles shall be adjustable with ball joint made of brass fitted on the pipe. The pipe ring should be made of Gi “B” class with flanges, Nut bolts, gasket, Leg Stands etc. Pipe ring, manifold, stands are shall be Powder Coated on surfaces with welding finishing work. The Fountain Nozzles shall be made of machined brass including all final Chrome Finishing work. ISI marked control valve are used for control the fountain height. Complete set Make Premier/Famous/Ripples

Supply and fixing of 3 HP monoblock submersible pump of kirlosker/Pluga/Texmo or equivalent make AC three phase 380/440 Volts, 50 cycle with foundation bolts, suction bend and 10 mtr. Of submersible cable duly insulated.

Providing & Fixing of 3'' S.S. 304 grade wire mesh Mesh Filter for Pump filtration of water at inlet of mono submersible pump. Filter made out of M.S.Sheet & Flats with inlet threaded nipple as per pump inlet. The S.S.mesh fitted on filter body aluminium but type rivet for proper strength.Make Premier/Famous/Ripples

Designing, Supply and fixing of (3 HP X2) 1no. Electirc sequencing control panel box above pump of steel sheet enclosure with front door, back wall mounting type with detachable bottom plate with provision for incoming & outgoing cable. Red oxide under coat and paint finish work on surfaces with Proper fixing of main incoming four pole MCB for Pump and saperate mcb for lights, HRC fuse with base, Contactor, Relay, wiring, Strips complete set. 7 station Pre programmed Microcontroller based Electric controller shall be used to control the lights.

Designing, Supply, erection. Commissioning and testing of of IP68 Protecetd (Certified by any lab of Govt. of India ) underwater lighting system dynamic color changing capability continually red , green, blue shall consist of 9 X 3W, 12 V/24V DC Led lamps Mounted on MCPCB comprising high quality water proof luminaries. The Luminaries shall have die cast aluminum alloy helices for strength and totally protected by fused epoxy polyester coating on all surfaces. The wall thickness of Luminaries not less than 5 mm. The wiring shall be reputed make double insulated PVC within copper conductor. The Connection shall be fully water proof. All external nuts, bolts and stands of stainless steel.

4 sq.mm. 3 core submersible cable of approved make

1.5 sq.mm. 4 core submersible cable of approved make

LALCHAND GARDENING ENTERPRISES

GUPTA ENTERPRISES