REPAIR/REPLACEMENT OF SEWAGE LINE, CLEANING OF SEPTIC TANK, FILTER BEDS AND DRAINS, FOOTPATH, CULVERT, COMPOUND WALL ANDBARBED WIRE FENCING AT DINJAN MIL STN

Amount

Excavation in trenches not exceeding 1.5m wide ane not exc 1.5m deep for foundation, pipeline etc not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as required and as directed.

Returning filling including spreading, levelling watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as required and as directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as required and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quions, arches, pillars etc. but excluding ashlar facings, dressed stonework complete all as specified and as directed.

M&L for Brick work sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work of concrete surface finished fair and even complete all as specified and as directed.

M&L for preparation of new surfaces of wall and applying three coat of white wash complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed.

M&L for PCC 40mm thick type B-1, (1:2:4) (20mm graded aggregate) finishing cement concrete surfaces even and smooth complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded aggregate) as in foundation filling, mass concrete concrete complete all as specified and as directed.

M&L for 150mm thick cement concrete (1:2:4) type B-2 (using 40 mm graded aggregate) as in foundation, mass concrete complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railings upto 60cm in height, coopings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for reinforced concrete pipe 600mm bore class NP2 laid and jointed with collars complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwide specially provided for including cuting reinforcement to facilitate demolition of concrete complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bending with and including mild steel wire (annealed) not less than 0.9mm dia for securing complete all as specified and as directed.

M&L for precast reinforced concrete (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab of manholes fixed/laid in position & set in cement mortor 1:4 complete all as specified and as directed

S&F for PVC (SWR) pipes type 'B' single socketed in any length with rubber ring joints laid in trenches or floors 110mm bore pipes complete all as specified and as directed

M&L for PVC (SWR) pipes type 'B' 110mm bore, single socketed in any length with rubber ring joints fixed to walls using MS holder bat, fixed in repair complete all as specified and as directed

S&F for PVC (SWR) branch piece single (single Y) 110mm bore with access door fixed in repair complete all as specified and as directed

S&F for PVC (SWR) bends any radius 110mm dia fixed in repair complete all as specified and as directed

Cutting into existing manholes for connecting new drains, making good to pipe and plastering the distrubed portions in cement mortar (1:3) to match with surround surfaces, cutting out existing benching and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B-1 finished smooth and reforming benching as required for 100/110 mm bore pipe complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and plastering the distrubed portions in cement mortar (1:3) to match with surround surfaces, cutting out existing benching and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B-1 finished smooth and reforming benching as required for 150/160mm bore pipe complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and plastering the distrubed portions in cement mortar (1:3) to match with surround surfaces, cutting out existing benching and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B-1 finished smooth and reforming benching as required for 200/225mm bore pipe complete all as specified and as directed.

Dismantiling of cast iron work of any description like manhole cover or similar items etc complete all as specified and as directed.

Demolition and breaking up of drain pipes (salt glazed were or AC or reinforced cement concrete) set in cement mortar of 150/160mm dia complete all as specified and as directed.

Demolition and breaking up of drain pipes (salt glazed were or AC or reinforced cement concrete) set in cement mortar of 200/225mm dia complete all as specified and as directed.

M&L for salt glazed stone ware drain pipes 150 mm bore, grade 'A' laid in trenches, jointed cemnt mortar and tested complete all as specified and as directed.

M&L for salt glazed stone ware drain pipes 200 mm bore, grade 'A' laid in trenches, jointed cemnt mortar and tested complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 for 150mm pipe bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, in complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 for 200 mm pipe bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

Attending of complaint by covering the following items of work :- (a) Cleaning & clearing of blocked sewage line different dia incl manhole by rodding, taking out the muck, mud & other debris from inside the sewage line/manholes, removing the debris to a distance exc 200m & n exc 250m & covering the same with a layer of soil not less than 15cm thick incl excavation of pit soft/loose soil for depositing the substances retreived from manhole/sewage pipe line all as directed by Engr-in-Charge. (b) Cleaning and clearing of blocked IWCs & EWCs to sewage line upto 1st manholes by rodding or any other suitable method & taking out the muck, mud and other debris from WCs and the sewage line cleaning with fresh water & removing the debris upto a distance exceeding 200M and not exceeding 250M and covering the same with a layer of soil not less than 15cm thick all as directed by Engr-in-charge. (c) Cleaning and clearing of blocked chocked floor trap in kitchen & bathrooms including gully trap, the waste water line connection etc by rodding or by any other suitable method & taking out the debris to a distance exceeding 200m & not exceeding 250m & covering the same with a layer of soil not less than 15cm thick complete and drain out the floors taps, gully traps waste pipe and soil pipe with fresh water etc complete all as directed by Engr-in-Charge. Note:- Adequate number of workmen shall be deployed as and when complaint received for immediate execution. If any complaint not attend by the contractor within a day then a sum of Rs. 50.00 will be recovered against per complaint per day from the contractor.

Taking out liquid/solid content from manhole/sump/septic tank and sewage lines either manually or by pumping cleaning throughly including disposal of liquid/solid content out of the Cantt Area and covering with layer of earth complete all as specified and as directed.

M&L for precast cement concrete (1:2:4) type B-0 (using12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid) including all mouldings but excluding frame in cement moetar (1:6) complete all as specified and as directed.

M&L for prepolished machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles store and rubbish off the premises complete all as specified and as directed.

M&L for prepolished chequered cement concrete tiles with white cement and pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry over screed bed or bedding 15mm thick cement mortor (1:6) in floors complete all as specified and as directed.

M&L for non skid cereamic coloured Rustic tiles 7 to 8mm thick (square/rectangle) area of each tiles exceeding 0.11 sqm and not exceeding 0.18 sqm over screed bed or bedding 15mm thick cement mortor (1:6) in floors etc. set and joined in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Renewing cement concrete tiles in patches, area not exceeding 5 sqm including removing and cleaing old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles over screed bed or bedding 15mm thick cement mortor (1:6) in floors etc.complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion concrete, brick work, masonry work, etc and making good disturbed complete all as specified and as directed.

Dismantling fencing wiremesh, any type, any size complete all as specified and as directed.

Supply only 4mm thick mild steel galvanised chainlink fencing 40x40mm size complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including porvision of binding wire complete all as specified and as directed.

S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed wire with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvinised mild steel wire, staples or steel pins, etc. complete all as specified and as directed.

S&F for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.;conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F for flat iron fillets (for securing chain link fencing etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

M&L for TMT bar 10mm dia and over cut into length, bend to shape required including cranking bending spirally for hoping as in tie bar for fixing chain link fencing complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer surfaces of any description, not exceeding 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces on steel surfaces exceeding 10cm girth or width complete all as specified and as directed.

M&L for mild steel screw bolts(machine made) diameter of neck 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and as directed.