Upgradation of Sowa Rigpa Educational Institute at NIT Deorali, Sikkim.

Amount

(A) : PHC Building

Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth lift all complete.

Earth in excavation in mixed soil in foundation trenches i/c dressing of sides, disposal of excavated earth upto 30m lead and 1.5m lift all complete.

Providing & Laying in position cement concrete of 1:3:6 mix. (1 cement, 3 coarse sand, 6 graded stone aggregate of 20mm & down size)

Filling inside plinth in building works with 23 cm layers, consolidated to 15cm including watering, ramming etc. all complete.

Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge.

Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge.

Providing and Laying in position 1:1:2 Mix (1cement, 1 coarse sand 2 graded stone aggregate 20mm and down nominal gauge) of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.

Providing, fixing & removing form works for casting of R.C.C items all complete.

Foundation Base

Columns

Beams

S/B/B in position tor steel and mild steel reinforcements in all R.C.C works i/c cost of binding wires etc all complete.

Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge including curing etc all complete.

P/L 15mm thick cement plasters in 1:3 mix c.m i/c curing etc all complete.

Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blue or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.

Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.

Providing, fitting and fixing of dressed sal timber in all types of frames complete With imported timber from outside the state

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)

Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Charge all complete:

Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete.

Providing and fixing Brass bright finished butt hinges with necessary screws etc. complete.

Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.M.S (Oxidized)

Providing and fixing 100mm mortise lock with 6 levers and pair of handles with necessary screws etc complete.MS.

Providing and fixing Tower bolt 200x100mm with necessary screws etc complete.Brass (copper oxidized)

Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:

Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.

Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.

Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.

Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim- style roofing as per the standard specification and design and as per the direction of Engineer - in- Charge all complete.

Providing, fitting, fixing of 24 BWG GP sheet roofing by making corrugation of 50mmx50mm x50mm on both side with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete.

Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULAS Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.

Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete.

Providing and fixing 15cm wide 45cm overall semicircular G.P sheet (Class I) gutter with iron brackets 40x3mm size, bolts, nuts, washers etc including making, connection with rain water pipes.

Providing and fixing M.S round or square bars at required spacing in timber frames of windows as per the direction of Engineer - in- Charge all complete.

stair case railing

outdoor column

Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanized Iron steel works including preparation of the surface complete.

Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.

Providing box drain of 60 cm (ht) x 45 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm (road side) with1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones, complete as per the direction of the Engineer-in-Charge.

Providing / Fitting / Fixing in position suspended exposed grid false ceiling using E-Board pearl (tested for inflammability as per IS 11871)& E- Grid of grid size 1200 x 600 x/600 x 600 mm with main runners 39 x 24.7 mm cross Tee 29 x 24.7mm and wall angle 22.2 x 22.2 mm placing 4mm thick E-Board pearl in the grid of E-Grid duly suspended with 4mm dia GI bars hangers fixed with tee dash fastener of fro purlin of the roof with butterfly clips & hold down clips, providing provision for light fixtures air conditioning diffuser and ducts, sprinklers, smoke, detectors i/c paintings water based acrylic cement primer etc all complete:

Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge.

Providing and fixing prelaminated sheet three layer medium density (exterior grade) particle board grade - I type - II confirming IS 12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in panelling fixed in Aluminium doors, wndows, shutters and partition frames with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge.

Stone tile 8mm thick (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.

Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete.

Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishing and including cost of one coat priming on the base frame complete.

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications

Cost of Haulage Excluding Loading and Unloading of stock material within 100 km from Siliguri to Gangtok all complete.

Loading and Unloading of Cement or Steel by Manual Means and Stacking.

Cost of Haulage Excluding Loading and Unloading of Sand within 50 km all complete.

Cost of Haulage Excluding Loading and Unloading of Stone chips within 50 km all complete.

Cost of Haulage Excluding Loading and Unloading of Stone within 50 km all complete.

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.

Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete.

(B) : INTERNAL AND EXTERNAL ELECTRIFICATION

(I) Wiring With PVC Insulated (HR FRLS) Copper Conductor SingleCore Cable in Best Quality Recessed Alathine Pipe.

Wiring for light/Fan/Call bell & 6 A plug point with 2x1.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sqmm HR FRLS PVC insulated copper conductor single core cable as required.

Wiring for 16 A plug point with 2x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required.

Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required.

Wiring for sub-main for 25 amps (2x1000W) plug points with 2x4.0 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required.

(ii)Switch, Socket and Accessories .

Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box including connection etc. as required.

(a)1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box

(b)2 no. 06 amps FT switch with 1 no white 2 moduler plate and 2 moduler metal flux box.

(c)3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box.

(d)4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box.

(d)6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box.

(d)8 no. 06 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box.

Supplying & fixing 1 no. 2 way switch with 1 no 1module white plate & 1 no 1 module metal flux box including connection etc. as required.

Supplying & fixing 1 no. fan step regulator 120 watts, 1 no. white plate (2 module) and 1 no. (2 module) metal flux box including connection etc. as required.

Supplying & fixing Metal plug & socket DB's 63A FP 3P+N+ E

Supplying & fixing Metal plug & socket DB's 32A DP+E

Supplying & fixing 1no. 25 amps socket & 1 no. 25 amps switch with 1 no, 3 module white plate & 1 no. 3 module metal flush box including connection etc. as required.

Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (3 module) & Metal flux box (3 module) including connection etc. as required.

Supplying & fixing 2 no. 16 amps socket, & 2 no.16 amps switch,white plate (6 module) & Metal flux box (6 module) including connection etc. as required.

Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box ) including connection etc. as required.

Supplying & fixing 2 no. 06 amps socket & 2 no. 06 amps switch with 1 no, 6 module white plate & 1 no. 6 module metal flush boxincluding connection etc. as required.

Supplying & fixing 1 no RJ45 data socket with 1 no, 1 module white plate & 1 no. 1 module metal flush box including connection etc. as required.

Supplying & fixing 2 no RJ45 data socket with 1 no,2 module white plate & 1no.2 module metal flush box including connection etc. as required.

Supplying & fixing 1 no RJ11 tele socket with 1 no, 1 module white plate & 1 no. 1 module metal flush box including connection etc. as required.

Supplying & fixing 1 no RJ-45 data socket plus 1 no RJ-11 with 1 no,2 module white plate & 1 no. 2 module metal flush box including connection etc. as required.

Supplying & fixing 1 no HDMI data socket plus 1 no RJ-45 data socket with 1 no, 2 module white plate & 1 no. 2 module metal flush box including connection etc. as required.

(iii)Light Fitting & Accessories.

Supplying & fixing recessed mounted LED panel light fitting 2ft x 2ft 36 watts including connection etc. as required.

Supplying & fixing surfaced LED fitting 20 watts including connection etc. as required.

Supplying & fixing recessed LED fitting 20 watts including connection etc. as required.

Supplying & fixing surface LED fitting 12 watts including connection etc. as required.

Supplying & fixing Ceiling Fan 1200mm with complete accessories including connection as required.

Supplying & fixing Angle/Batten holder with 9 watts LED lamp including connection etc. as required.

Supplying & fixing LED wall mounting mirror light including connection etc. as required.

Supplying, Installation, testing & commissioning of ventilating fan 250mm including connection as required.

Supplying, Installation, testing & commissioning of ceiling mounted ventilating fan including connection as required.

(iv)Earthing and Lightning Conductor..

Supply, Installation, Testing and Commissioning of GI Chemical earthing electrode, cristiline conducting material filled, 2Mtr. long PIP technology inner dia 42.2mm & outer da 76.2mm, placed with 50 Kg. back filled compound mixed with equal quantity of black garden soil replacing the excavated earth including excavation in any kind of soil complete in all respect. Earth pit cover (High grade PVC, Circular, high compressive strength, impact resistant and high heat resistant)

Supply errection testing and commissioning of conventional solid copper air terminal prong 1.5 mtrs long, with threaded type copper ball, finials and base plate complete in all respect.

Supply & laying of Copper / GI / Aluminium earthing strips for connecting the earthing electrodes with the electrical installations / systems / distribution boxes etc, with all fixing accessorieson and placing walls / trenches / ceiling / directly burried in earth as per specification and requirement. All earth strips burried in eatrh will be provided with protective non bio degradable PVC sleevesaccording to the size of conductor. Test certificate of all kind of strips shall be produced by the vendor during supply.

50 x 6 mm G I hot deep galvanised strip 80-100 microne

40 x 6 mm GI hot deep galvanised strip 80-100 microne

25 x 6mm GI hot deep galvanised strip 80-100 microne

10 SWG CU WIRE

Earth pit cover (High grade PVC, Circular, high compressive strength, impact resistant and high heat resistant)

(v)Panels and Distribution boxes

Supplying & installation testing and commissioning of MCCB/MCB distribution board Double Door/Single door (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)

Vertical TPN DB 4 way MCCB)

TPN DB 8 way

TPN DB 6 way

TPN DB 4 way

TPN DB 16 way

TPN DB 12 way

Supplying, installation, testing & commissioning of Residual current circuit breaker (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)

Double pole 25 Amps

Four pole 25 Amps

Four pole 40 Amps

Four pole 63 Amps

Supplying and fixing following rating, double pole, Residual Current Breaker with Over-Current, 240 V, having a sensitive current 30mA in the existing DB complete with connections, testing and commissioning etc. as required

Four pole 16 Amps

Four pole 32 Amps

Supplying, installation, testing & commissioning of Miniature circuit breaker (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)

Single pole 10 Amps

Single pole 16 Amps

Single pole 25 Amps

Double pole 25Amps

Double pole 32Amps

Double pole 63Amps

Triple pole 16 Amps

Triple pole 32 Amps

Triple pole 63 Amps

Four pole 25 Amps

Four pole 32 Amps

Four pole 40 Amps

Four pole 63 Amps

(vi)Laying of 1.1 kv Grade Cables..

Providing & laying 1.1 KV grade XLPE insulated aluminium armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required.

3.5 Core 120 Sqmm Cable

3.5 Core 25 Sqmm Cable

4 Core 16 Sqmm Cable

Providing & laying 1.1 KV grade XLPE insulated copper armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required.

4 Core 4 Sqmm Cable Cu Ar

4 Core 6 Sqmm Cable Cu Ar

3 Core 4 Sqmm Cable (Un Ar)

Termination of cable 3.5 core / 4 core armoured Aluminium cable with required aluminium lugs and compression glands for each end complete in all respect including connection.

3.5 Core 120 Sqmm Cable

3.5 Core 25 Sqmm Cable

4 Core 16 Sqmm Cable

Termination of cable 3 core / 4 core armoured copper cable with required copper lugs and compression glands for each end complete in all respect including connection.

4 Core 4 Sqmm Cable Cu Ar

4 Core 6 Sqmm Cable Cu Ar

3 Core 4.0 Sqmm Cable(Un Ar)

(vii)Main panels.

MAIN LT CUM DG AMF CONTROLLER PANEL Incomer: 320A 4 Pole 36kA MCCB with Microprocessor Based with O/C, S/C, E/F Release-1No., 320A 4 Pole 36kA MCCB with Microprocessor Based with O/C, S/C, E/F Release-1No. Outgoing Feeder: 63A 4Pole 10kA MCB -10nos.,40A 4Pole 10kA MCB- 2nos.,32A 4Pole 10kA MCB- 2nos., 25A 4Pole 10kA MCB-16nos. 25A 2Pole 10kA MCB-06nos., 32A 2Pole 10kA MCB-03nos.,63A 4Pole RCCB 30mA-01nos.

Fire Panel :

(viii)UPS

Supplying, installation, testing & commissioning of 2 x 05kVA UPS system for Parallel Redundancy Mode Single Phase Input and Single Phase Output

(ix)Substation & supporting items

Supply and erection of MS Swaged Type steel tubular pole as per Standard IS: 2713 ( Pat-I and III): 1980 as amended upto date, 410 SP 39 overall length 9 meters , planting depth 1.5 meters, above ground 7.5 meters , effective length of Each section. Bottom 5.0 meters, Middle 2.0 meters, Top 2.0 meters. Outside diameter and Thickness of each Section. Bottom 165.1x 5.40 mm, Middle 139.7x 4.50 mm, Top 114.3x 3.65 mm . Joint Length ( in cm.) Bottom 30 cm. Top 30 cm. Approximate weight of Pole 170 Kg. Point of application of load below/top (mtr.) 0.35 mtr. Breaking load ( in Kgf ) 478. Working load with factor of Safety : 2.5 ( in Kgf ) 210. Crippling load ( in Kgf ) 339 . Complete with MS base plate of 6mm thick and earthing slot. The rate should include painting the pole with two coats of red-oxide primer of approved brand and erection by digging pit (0.6x0.6x1.5M) and concreeting with 1:4:8 cc up to 400 mm above ground level, stay set etc as required complete in all respect. (Make: ISI Standards with test certificate)

Cross arm made with 100x50x6mm MS Channel 2.30 Mtrs long with fixing clamps, nuts bolts etc for mounting SA, DISC, PIN, GOABS and DO etc. complete in all respect.

Horizontal member 2.30 mtrs

Cross member 3.10 mtrs

Gang operated Air Break Switch 11 KV TP 400 Amps Heavy duty as per IS 9920 & 9921 complete with all fittings.and test certificate. ABI/Mayur/Rex/ Eqv

Drope out fuse unit 11 KV TP 400 Amps heavy duty as per IS 9385 complete with all fittings.and test certificate. ABI/Mayur/Rex/ Eqv

9 KV,5 KA single pole unit Metal Oxide gapless Surge Arrestor for 11KV, 50c/s solidly earthed neutral system confirming to IS:3070 (part 3) Raychem RPG make or equivalent

11 KV 10 KN Pin insulator with Pin complete in all respect with spindle.and test certificate. ABI/Mayur/Rex/ Eqv

11 KV Disc Insulator 45KN two disc per set with H/W fittings complete in all respect and test certificate. ABI/Mayur/Rex/ Eqv

ACSR 'DOG" Conductor 100 sq mm

Guy assembly complete with 7/10 SWG GI Stay wire, 140x85 mm HT Guy insulator,18 mm dia stay rod 1.8 mtrs.long wiuth bow thimble,turn buckle and 300 x 300 x 6 mm anchor plate

Red oxide primer and Aluminium Paints for two poles

Danger Notice Plate 11 KV

Danger Notice Plate 440 V

Supply and fixing in position 900MM wide 12MM thick rubber matting of 11KV grade as per electricity rules. Along with test certificate.

Supply, installation, testing ,commissioning of 100kVA, 11kV/433V Oil Type Outdoor Transformer complete in all respect with the following accessories and latest specification.This specification covers design, manufacture, assembly, testing at manufacturer's works, supply & delivery of three phase 50 HZ, 11kV/0.433 V, Delta/Star, Vector Group Dyn11, two winding, outdoor type, oil immersed naturally Oil & Air cooled, Stack Core, non sealed type Distribution Transformer with Outdoor Bushing and cable End Box at both ends .The transformers covered by this specification shall, unless otherwise specified be built to confirm to the latest Indian Electricity Rules, wherever applicable and the requirements of the latest issues of IS: 1180 (Part-I), CBIP Standards and other ISS (All as per latest isuses for level-II)

Supply, installation, testing ,commissioning of Diesel generator set 100 KVA prime rating radiator cooled with alternator of 58.5 kVA output, 3 Phase, 415 V, 50 c/s 0.8 p. f. A.C a totally enclosed liquid cooled multi- cylinder (6/12) in-line 4 stroke, radiator cooled diesel engine developing suitable BHP at 1500 rpm, along with standard accessories, ƒBrushless type, Screen protected, Revolving field, Self excited alternator with static excitation system running at 1500 RPM.

3 Core 150 Sqmm Cable

3 Core 150 Sqmm Cable

(x)Cable Trav

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required

a) 100 mm width X 50 mm depth X 1.6 mm thickness

b) 300 mm width X 50 mm depth X 1.6 mm thickness

(C) : INTERNAL AND EXTERNAL PLUMBING WORK.

(i) sanitary fixtures.

Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008/ Eqv.

Supplying Installing, testing and commissioning of round / rectangle white colour glazed wash basin under counter type with 32 mm dia waste coupling half thread with 80mm height, CP bottle trap with extention pipe, 15 mm CP 450 mm long CP inlet connection pipe, CP wall flange all of approved make etc, complete in all respect.(Oval wash basin/Round wash Basin)

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: Basin Mixer

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Supplying, installing and testing 8 mm dia CP health faucet of approved make with necessary CP flexible hose 1200 mm long, wall hook, CP wall flange complete in all respect.

Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:.

Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.

Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete.

Supplying, fixing and testing uPVC Multi floor trap along with SS frame & cover (125 mm x 125 mm square / 100mm round). Trap of 100 mm dia. Inlet and 75 mm dia outlet fixed on a bed of cement concrete etc., complete in all respect. (The frame and grating shall be approved by Architects)

Supplying, fixing and testing uPVC P trap along with SS frame & cover (125 mm x 125 mm square / 100mm round). Trap of 100 mm dia. Inlet and 75 mm dia outlet fixed on a bed of cement concrete etc., complete in all respect. (The frame and grating shall be approved by Architects)

Fixing CP brass LONG body bib cock including, necessary flange, cutting and making good he walls / floors wherever required complete.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) angular stop cock.

Providing, fitting and fixing towel ring of chromium plated brass complete with CP brass screw and timber cleats.

Providing, Fitting and Fixing C.P. Brass Double coat Hooks with CP screws.

(ii) soil, waste,rain water pipes

Supplying, fitting fixing and testing SWR soil and waste pipes confirming to IS 13592, type B solvent fit (confirming to IS 5382) joint inclusive of all necessary fittings like bends, tees, offsets, door bends, junctions, cowls, etc., laid under floor/ fixed on walls on G.I. brackets with GI 'U' clamps in pipe shafts etc., complete in all respect.

a) 110 mm dia

b) 75 mm dia

Supplying, fitting fixing and testing SWR soil, waste pipes confirming to IS 13592 type B with rubber ring (confirming to IS 5382) with solvent joint inclusive of all necessary fittings like bends 45 or 90 degree, 'Y's, tees, offsets, door bends, junctions, screw type caps, vent cowl etc., fixed in the pipe shafts on pipe racks. complete in all respect.

a) 110mm dia

Supplying,fitting fixing and testing uPVC UV-R pressure pipe (6 Kg/ sq cm) confirming to IS 4985 : 2000 for waste connection from wash basin, kitchen sinks and urinal to floor trap/ anti syphonage pipe with solvent fit joints, including all the fittings, laid under floor/concealed in wall etc, the work shall include wall chase and making good the same in cement mortar etc, complete in all respect.

a) 50 mm dia

Supplying, fitting fixing and testing SWR rain water pipes with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete in all respect.

a) 110 mm dia - Type - A

Supplying, fitting fixing and testing Roof Corner Trap with suitable supports etc., complete in all respect.

a) 110 mm dia

(iii) : water supply system.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

a)20 mm nominal outer dia Pipes

b)25 mm nominal outer dia Pipes

c)32 mm nominal outer dia Pipes

d)40 mm nominal outer dia Pipes

Supplying, installing and testing approved make full way lever operated CPVC ball valves conforming to ASTM D 2846 with unions etc.Complete in all respect.

a) 20 mm dia

b) 25 mm dia

c) 32 mm dia

d)40 mm dia

e)50 mm dia

(iv) : external sewerage system.

Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres.

Supplying, fixing, testing and commissioning precast gully traps, 300X300mm pvc grating (medium duty), 100 mm dia outlet set in PCC 1:4:8 bed, 125 thick masonry chamber in CM 1:4, internal and external plastering 12mm thick in CM 1:6, necessary earthwork, C.I. cover medium duty weighing 12Kgs. etc., complete in all respect. as directed by the Engineer in charge.

Providing and constructing Inspection chambers using 125mm thick burnt brick masonry walls built in CM 1:4 over PCC 1:4:8 bed ,RCC cover slab, benching in CC 1:2:4 internal faces plastered smooth in CM 1:4, 15mm thick and outside exposed faces with cm 1:6 15mm thick including 600x600mm medium duty CI Manhole Frame & cover with necessary earth work excavation and backfilling and disposing surplus soil as directed by the Engineer in charge etc., complete in all respect.

a) 450x500mm size internal & depth upto 600mm

b) 500x500mm dia size internal & depth upto 600mm

Supplying, laying, jointing, testing and commissioning approved make double wall corugated with in line socketed pipe (with rubber ring )SN-4 with joints for Under ground drainage works. The quoted rate shall include necessary fittings, pipe to be laid below ground level in trenches upto required depth, dewatering, jointing of pipes, water testing and setting on sand cushioning 100mm, refilling, and making good the same complete as requiredcomplete in all respect.

a) 170 mm dia

(v) : external water system.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

a) 50 mm nominal outer dia Pipes

PVC TANK DETAILES

Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) 2000 Itrs capacity

(D) : FIRE DETECTION,ALARM AND FIRE SYSTEM WITH AUTO MANUAL OPERATION.

(i) fire detection and alarm system.

Supply, installation, testing and commissioning of 08 Zone UL- 864 listed , NFPA-72 compliant , with switched mode power supply, modular construction, auto resettable fuse, 24V DC output, surge protection, programmable AC loss delay, trouble reminder,alarm verification, battery polarity reversible protection, surface mount conventional Intelligent Main Fire Alarm control Panel with 08 x 2 Dot matrix LCD display, RS 485 Port, IP50.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of heat detector operating at 54°C/57C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying & laying of 2X1.5 sqmm fire alarm armoured cable, 6000/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer seath complete as required.

2C x 1.5 mm Armoured ( power cable)

2C x 1.5 mm Armoured ( hooter cable)

(ii) internal fire riser piping system.

Supplying, installation testing and commissioning of the following

Supply, fabrication , laying, testing & commissioning of heavy grade IS marked & as approved make list black mild steel piping confirming to as per IS 1239/3589(Part 1) complete ( ‘B' class MS ERW pipe ) for undegound/ overground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc.Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the Architect and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over heads pipes and providing and fixing pypkote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm)etc.

150 mm NB 4.8 mm thick and 18.90 Kg. wt./ mtr. Approx.

80 mm NB 4 mm thick and 8.36 Kg.wt./ mtr. Approx.

50 mm NB 3.6 mm thick and 5.03 Kg. wt. / mtr. Approx.

25 mm NB 3.2 mm thick and 2.41 Kg. wt./mtr. Approx.

Supply, Installation, testing & commissioning of CI Gate Valve as per IS:14846 (PN16) with matching flanges complete with nuts & bolts. 150 mm (For riser )

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainles Steel

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304)

Providing, fixing and testing forged brass 25 mm dia screwed inlet single acting air release valve as per IS:9890 with 25 mm dia ball valve on inlet side and pressure gauge with isolating cock.25 mm Air Valve

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:Stainless Steel (Grade 304)

Supplying & fixing first aid fire hose reel confirming to IS 884 of thermoplast braided suitably reinforced 20 mm size (25kg/cm2/ 350 psi bursting pressure ) , 170 degree & 30 m standard length with 5 mm tapering branch nozzle ,25mm dia. Pipe to connect to riser with cut off ball valve attachment. Hose to be swinging type wall mounted drum & recessing into hose cabinet to suit location including fixing with lead anchor fasteners & bolts ( Including drum and swivel arrangement ) etc complete.30m

Supply, Installation, testing & commisssioning of 100 mm dial Pressure gauge with Syphon tubing, isoltaion valve & mounting accessories complete Range : 0 - 16 kg/sq.cm.Pressure Gauge : 0- 16 kg/sq.cm.

(iii) external hydrant system.

B’ class MS ERW Pipe as per IS1239 for undegound/overground pipes with welded /flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc.Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the Architect and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over heads pipes and providing and fixing pypkote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm) etc.150 mm NB 4.8 mm thick and 18.90 Kg. wt./ mtr. Approx.

(iv) spainkler system.

Supplying, installation testing and commissioning of the following

‘B' class MS ERW pipe as per IS1239 (Part 1) for over ground pipes with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports (all with screwed/welded joints) as required including MS pipe of shorter lengths, tapering connecting pieces, short or long bends, forged specials like sockets, union nuts, elbows, reducers, plugs, tees, bends etc. complete to make the system operative as required by LFA / TAC authorities. The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fastners.The work includes making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the Architect/Consultant/Client and painting two coats of approved shade (Post office red) of enamel paint over a coat of approved primer for over ground / overheads pipes.

125 mm NB 4.80 mm thick and 15.9 Kg.wt./ mtr. Approx.

100 mm NB 4.5 mm thick and 12.2 Kg.wt./ mtr. Approx.

80 mm NB 4 mm thick and 8.36 Kg.wt./ mtr. Approx.

65 mm NB 3.6 mm thick and 6.42 Kg.wt./ mtr. Approx.

50 mm NB 3.6 mm thick and 5.03 Kg. wt. / mtr. Approx.

40 mm NB 3.2 mm thick and 3.56 Kg. wt. / mtr. Approx.

32 mm NB 3.2 mm thick and 3.01 Kg. wt. / mtr. Approx.

25 mm NB 3.2 mm thick and 2.41 Kg. wt./mtr. Approx.

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

Pendent Sprinkler

5 mm glass bulb 141 deg. Pendent Sprinkler

Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

SITC of test & drain assembly with all 25 mm dia piping, 25 mm drain valve etc complete in all respect (TEST SPRINKLER ALONG WITH ISOLATION VALVES, SIGHT GLASS ETC & REQUIRED PIPING UPTO NEAREST DRAIN )

Test assembly

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

Size : 125 mm. (For Floor Connection)

Size : 100 mm. (For Floor Connection)

Size : 80 mm. (For Floor Connection)

Supply, erection, testing & commissioning of FLOW SWITCH as per technical specification.

Size : 125 mm. (For Floor Connection)

Size : 100 mm. (For Floor Connection)

Size : 80 mm. (For Floor Connection)

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required :

Size : 125 mm. (For Floor Connection)

Size : 100 mm. (For Floor Connection)

Size : 80 mm. (For Floor Connection)

Pressure Guage with isolation clock: 0-16 kg/sq.cm (for sprinkler header)

Size : 125 mm. (For Floor Connection)

Size : 100 mm. (For Floor Connection)

Size : 80 mm. (For Floor Connection)

(iv) fire extingishers.

Providing & Fixing of fire extinguishers with necessary accessories, stand, trolley, etc.

Supply, erection, testing & commissioning of 4 Kg ABC (Powder Type) Fire Extinguisher. In HP Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal discharge tube, squeeze lever type valve, discharged nozzle, suspension bracket, conforming to IS: 15683 duly charged with ABC powder (Mono Ammonium Phosphate) conforming to IS: 14609 and pressured by Nitrogen suitable for operating .on 30⁰C to + 55⁰C. (4 years maintenance free) complete in all respect.

Supply, erection, testing & commissioning of 4.5 Kg. Cap. CO2 type Fire Extinguisher (ISI marked) complete with tube horn etc.(ISI marked), handle , fixing bracket & other accessories.

ISI Marked Stainless Steel K type fire extinguisher of capacity 4kg assigned to extinguish class F fire for use in kitchen areas with a discharge range of 3 meters and working pressure of 15 bar operating at a temperature -10C to 60C confirming to IS 15683

(v) signages.

Installation in position the "FIRE EXIT" Sign with luminicent colour having size 300 x 100 mm

Fixing in position the signages " FIRE ORDER" contain the following matter on 3 mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 1200 x 1000 mm.

Fixing signage with printed " IN CASE OF FIRE, DO NOT USE LIFT. USE STAIRS ONLY" OF 1.5 cm height letters in red with white background. The size of the board shall be 300 x 250 mm and shaall be fixed at the height of 2 mtrs.from finished floor near Manual Call Point.

(E) : CCTV,IP-PBX,WIFI,NETWORKING,HARDWARE.

(i) network components (active).

L2 Switch: Supply, Installation, Testing & Commissioning of Gigabit fixed chassis in 1RU size. Includes 24 RJ-45 10/100/1G BaseT 4x1/10 Gig SFP+ (uplink/ stacking ports , Switching capacity 51 Gb/s , Switch frame rate 41 MPPS.

L2 Switch: Supply, Installation, Testing & Commissioning of Gigabit fixed chassis in 1RU size. Includes RJ-08 10/100/1G BaseT 2x1 Gig SFP+ (uplink/ stacking ports , Switching capacity 14 Gb/s , Switch frame rate 11 MPPS.

L2 POE Switch: Supply, Installation, Testing & Commissioning of Gigabit fixed chassis in 1RU size. Includes 24 RJ-45 10/100/1G BaseT 4x1/10 Gig SFP+ (uplink/ stacking ports, should support Dual PSU , Switching capacity 51 Gb/s , Switch frame rate 41 MPPS.

SFP: Supply & Installation of SFP Single mode 1G SFP module (1310mm, 10 km., LC-LC)

SFP: Supply & Installation of SFP Single mode 10G SFP module (1310mm, 10 km., SC-LC)

(ii) network components (passive).

Supply, Installation, Testing & Commissioning of Loaded LIU 12 port

Supply , Installation ,Testing & Commissioning 3 mtr LC-LC Fiber Patch Cord

Supply , Installation ,Testing & Commissioning 3 mtr SC-LC Fiber Patch Cord

Supply, Installation, Testing & Commissioning of Cat-6 24-Port UTP Loaded Toolless Patch Panel

Supply of 9U Rack :Frame/500x500 / FM / Casters T2/Glass/Metal Door, Shelf/500, PDU 1Ph, 230V, 8A, IRP Fuse - 1.8KVA, ITE / Server Rack Air Circulation module/Door Mount/ 180CFM, Horz Cable Organiser/1U/Loop, Mounting Hardware-CR (Pack of 10)

Supply of 22U Rack :Frame/480x600 / FM / Casters T2/Glass/Metal Door, Shelf/500, PDU 1Ph, 230V, 8A, IRP Fuse - 1.8KVA, ITE / Server Rack Air Circulation module/Door Mount/ 180CFM, Horz Cable Organiser/1U/Loop, Mounting Hardware-CR (Pack of 10)

Supply, Installation, Testing & Commissioning of Cat-6 1M UTP Copper Patch Cord -Colour-yellow to be used for CCTV.

Supply, Installation, Testing & Commissioning of Cat-6 1M UTP Copper Patch Cord -Colour-blue to be used for data.

Supply & Laying of 6 core armoured single mode optical fiber cable .

Supply & Laying of UTP CAT6 Cable (305 Mtr.)

(iii) IP survrillance.

Dome Camera: Supply, Installation, Testing & Commissioning of 2MP H.264/H.265 NW IR Dome Camera, 0.04Lux (Color), 0Lux (B/W, IR LED on), 2.8mm fixed lens, ONVIFS,G,T, WDR 120dB, 30fps@4MP all resolutions (H.265/H.264), H.265, H.264, MJPEG codec supported, triple streaming with full configuration, defocus detection, Directional detection, Motion detection, Tampering, crossing line, alarm in & out , Micro SD/SDHC/SDXC memory slot (Max. 128GB), IR viewable length 20m or better, PoE, CE, FCC, UL , NDAA, BIS, ROHS .

Bullet Camera: Supply, Installation, Testing & Commissioning of 2MP H.265 NW IR Bullet Camera, 0.04Lux (Color), 0Lux (B/W, IR LED on), 4mm fixed lens, ONVIFS,G,T, WDR 120dB, 30fps@5MP all resolutions (H.265/H.264), H.265, H.264, MJPEG codec supported, triple streaming with full configuration, defocus detection, Directional detection, Motion detection, Tampering, crossing line, alarm in & out , Micro SD/SDHC/SDXC memory slot (Max. 128GB), IR viewable length 30m or better, PoE, CE, FCC, UL , NDAA, BIS, ROHS .

NVR : Supply, Installation, Testing & Commissioning of 32CH NVR, support 12 megapixel camera supported, recording bandwidth 300 Mbps , 4K video out on HDMI monitor support, Dual monitor video out support, H.265, H.264, MJPEG compression support, 8 internal HDDs , e-SATA storage support, ARB & Failover (N+1) support, P2P service (QR code connect) support, CE, FCC,ROHS, UL and BIS.

Supply, Installation, Testing & Commissioning of 8 TB HDD with 7200RPM

Supply, Installation, Testing & Commissioning of 50" 4K Ultra HD Display

Supply & Installation of Wireless Mouse with Mouse Pad

Supply & Laying of HDMI cable 10 Mtr

Supply & Installation of Waterproof PVC Square Junction Box for CCTV Cameras IP65 5x5

(iv) IP-PBX.

Supply , Installation , testing & Commissioning of EPABX SYSTEM : 32 Analog-Extension, Analog Trunk :04 , GSM Port 04 , PRI 30ch 1, SIP trunk -10 , IVRS , Voice mail and expendable up to 128 port .

Supply & Installation of 20 pair (MS/PVC) MDF Box with Krone module having locking facility

Supply, Installation , Testing & commissioning of Table mount Phones having display .

Supply & Laying of 2 Pair 0.50 mm sheathed telephone cable

(v) P A system.

SPEAKER : Supply of In-Ceiling Speakers - 150mm / 4" Full Range Driver, Compatible with 100v Line Volt, Amplifier Power Requirement 6 watts - 16/7 Use - BG/Public Address

AMPLIFIER : Supply, Installation, Testing & Commissioning of Digital 2 Channel mixer Amplifier - Min. 240 watts in Continuous Running Mode.

Supplying and installation of the zone controller cum digital signal processor builtin dante ,Min 16 AEC Inputs , Network Controlled .

Supply, Installation, Testing & Commissioning of networked Call station For PA system.

Supply & Laying of 2 core 1.5 SQ.MM. Heavy-duty audio copper cable ( 16 AWG) For PA system

(vi) power backup.

UPS :Supply, Installation, Testing & Commissioning of 5 kva ONLINE UPS system with 15 minutes battery backup with single SMF battery bank retundancy mode compatible . 3 phase in & sigle phase out.

UPS :19 inch 2U , 1.5 KVA Rack Mountable UPS having 15 Min Backup . Builtin battery bank .

(F) : FURNITURE AND FURNISHING.

Atlas Solid Wood 4 Seater Dining Table With Rickman Lounge Chairs Table: 1200 x 750 x 750; Chair: 500 x 500 x 850

D'aromas Teakwood Café Dining Furniture for Modern Spaces Table: 600 x 610; Chair: 430 x 460 x 810

Bar Table And Stool Set, Seating Capacity: 3 Seater 1600 x 450 x 1050

Key Hinged Polished Mild Steel Locker 910 x 760 x 1830

Office Filing Cabinet 1370 × 685 × 460

Director's Desk (Left Side Storage)1800 x 1350 x 750

Low Back IC 123 Mini Jazz LB Innowin Office Ergonomic Chair 480 x 450 x 960

Nilkamal Trenvi High Back Office Chair 760 x 760 x 1220

Elif Executive Table (Exotic Teak Finish) 1470 x 635 x 762

Modern Black Leather Sofa Set, For Office, Waiting Area

Rustic handmade solid wood sleeper coffee table Xtra Large Xtra wide version 1000 x 690 x 300

Wilber 3 Seater Sofa Set 1870 x 785 x 720

Inspira’ 8 Feet Meeting Table In Norica Walnut Laminate Finish 2400 x 1100 x 760

Vixen Revolving Chair 650 × 680 × 860

Guest Chair for Office Visitors 580 x 510 x 900

Storage Shelf (slotted angle coated with galvanised steel four layers) 1220 x 460

ikea LANGFJAELL conference chair with armrests

(G) : STORM WATER DISPOSAL.

Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.

Providing box drain of 60 cm (ht) x 45 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm (road side) with1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones, complete as per the direction of the Engineer-in-Charge.

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)

Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.

Cost of Haulage Excluding Loading and Unloading of stock material within 120 km all complete.

Loading and Unloading of Cement or Steel by Manual Means and Stacking.

Cost of Haulage Excluding Loading and Unloading of Sand within 50 km all complete.

Cost of Haulage Excluding Loading and Unloading of Stone chips within 50 km all complete.

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.

Head load of non-stock materials for a distance beyond 30 m and within 100 m distance.

Haulage for throwing away of excavated earth via Surfaced Road for the distance of 30 km excluding loading and unloading all complete.

Providing, fitting & fixing of Galvanised Steel Grating of dimension 450 x 500 mm Material(rate as per the quotation attached)(including transportation & installation)For 200 m length

(H) : RAIN WATER HARVESTING SYSTEM.

Engagement of ordinary labour for Clearing and preparing the surface, labour for carriage and placement of water tank at designated platform including throwing of spoils etc all complete

Supply of water tank 5000L capacity (Rate as per STCS proforma invoice 22/STCS/PUR/H&FWD/700/25-26)

Transportation charges/delivery charges (Rate as per STCS)

Providing & fixing 15cm wide 45cm overall semicircular prepainted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, boltsfilled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes.

Soil pipe: 100mm dia PRINCE/SUPREME or equivalent soil pipe

Construction of platform (steel/cement concrete), connecting pipes, valves, labour charges etc. (payment to be made as per the actual measurement)

Provision for water pump etc all complete.

Provision for water filter etc all complete.

(I) : Provision for Laripa Works.

(J) : Provision for Water supply from source to site.

(K) : Provision for Dismantling and site clearance of existing structure.

Diki Palden Bhutia (BID ID -3226)

KARMA DOMA BHUTIA (BID ID -3227)