Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹13.8 L
EMD Value
₹13,900
Closing Date
12 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER UPSIC KANPUR
EXECUTIVE ENGINEER UPSIC KANPUR
Construction of tin shed and platform in the temple of Lord Shankar in village Pawa Raikwar Muhal development block Kabrai .
2026_MSME_1104233_18
1372/EE2/UPSIC/2026-27
Open Tender
Civil Works
Percentage
120 days
KANPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
EXECUTIVE ENGINEER UPSIC KANPUR
₹13,900
6 Jan 2026
6 Jan 2026
13 Jan 2026
6 Jan 2026
12 Jan 2026
6 Jan 2026
clearing of jungle including up rooting of trunk vegetarian grass bushetc DSR 2.32
Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift:D.S.R Code No-2.8.1
Earthwork in cutting or filling in ordinary soil form 3k.m.i/c all complete workDSR. 2.1+1.1.2
Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.DSR.2.27
P/L in position cement concrete of specified grade excluding the cost of Centering and shuttering all work upto plinth level 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from Natural sources:8 graded stone aggregate 40 mm nominal size derived from
M-150 brick work in 1:6Cement & C. Sand Mortar in Foundation and plinth…Complete Item. D.SR-6.1.2
12 mm cement plaster thick 1:4 cement and coarse sand fair side single and half brick wall including internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth. DSR No-13.4.1
Providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600 mm x600 mm size in flooring or skirt ing laid with 1:3 cement mortar (1 cement :3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i
Providing and laying in position specified grade of reinforcement cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement of R.C.C 1:1.5:3 with cement coarse sand .column T beam slab as DSR NO-5.1.2
M.S (Tor steel or plain ) in plain work such as R.C.C or R.B work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item.DSR 5.22.1
Cement concrete floorig 1:2:4 ( 1 cement 2 coarse sand 4graded stone aggregate) finished with a floating coat of neat cement,including cement slurry,excluding the cost of nosing of steps etc complete 40 mm thick with 20 mm nominal size stone aggregate DSR
Steel work inbuilt up Tubular(round,square or ractangular hollow tubes etc) Trusses etc including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer including welding and bolted with with special shaped washers et
S/F Of MS J-hook 16 mm dia i/c all complete work
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(0.63 mm thick sheet) DSR.12.1.3
Finishing walls with two coat of Premium acrylic emulsion smooth exterior paint of best quality supply of all materials,labour and T&P etc DSR NO 13.48.A.1
Painting with synthatic eleamin Paint of Approved and manufactore of reqquierd colour to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture DSR.13.62.1
S/F of 4x2.5 feet size granite stone at site including writing etc complete in all respect
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.11 MB
BOQ_2037163.xls
BOQ • 0.30 MB
TermsandConditionTenderCivilWorks.pdf
Tender Documents • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .