Supply, Installation, Testing, Commissioning of 63KVA Sub Station and Laying of HT/LT Network for SMF Burmal on Turnkey Basis falling under the jurisdiction of Electric Sub Division Hira Nagar of OM Division, Kathua, JPDCL

Amount

Creation of 63KVA Sub Station for SMF Burmal on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

11/0.433kV, 63KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al. wound ).

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70mm² Single Core Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long ST Pole( 410SP33)

11kV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps(Sizes and quantity as per Drawing No.F-2 of REC Construction Standards)

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge Connectors / PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

Prodigy Meter

Cement Bottoming of Pole with 1:2:4 mix as per RE Standard upto 0.25 Mtr above ground and 1.5Mtr below ground width 0.6MtrX 0.6Mtr including plastering and curing of the concrete

LT Distribution Box for 63KVA DTR with MCCBs for Incomer & SFUs for outgoing Circuits

Sundry items like aluminium lugs, Jumpers, binding Tape,

Laying of HT Line on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9.0 Mtr PCC Pole(WL-300Kg)

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

30 mm² ACSR Weasel Conductor

GI Channel X-arm including Clamps and Braces

GI V Cross Arms with Top Bracket including Clamps

Galvanized Nuts and Bolts

Anti-climbing device with clamps

Danger Plates with clamps

Stone Pad(300mm X 300mm X 75mm)

Aluminium Jointing Sleeves

9Mtr PCC Pole Cement bottoming with 1:2:4 mix as per RE Standard upto 0.25 Mtr above ground and 1.5 Mtr below ground width 0.6 Mtr X 0.6 Mtr including plastering and curing of Concrete

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Pole Earthing complete by GI Pipe of 40mm or GI rod 20mm , 2.5 Mtr long through GI Strip of 25 X 3 mm to each pole( As per J-2 REC Drawing) for 11KV Line

Laying of LT Line on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8.0 Mtr PCC Pole(WL-200Kg)

30 mm² ACSR Weasel Conductor

GI U Clamp for Shackle Insulators

16kN Polymer Shackle Insulators

Galvanized Nuts and Bolts.

Anti-climbing device with clamps

Danger Plates with clamps

Stone Pad(300mm X 300mm X 75mm)

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

M/S LUMEN ENGINEERS

ROCKEY SALES CORPORATION