Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.1 Craccepted-aoc | ₹1.1 Cr | accepted-aoc |
Tender Value
₹1.1 Cr
EMD Value
₹2 L
Closing Date
13 Apr 2026, 11:00 pmClosed
Minor Irrigation Department
RAGHURAM
Rejuvenation of Vyasanakere II stage II Lift LIS in HosapeteTaluk, Vijayanagara Dist.
MI/2025-26/LI/WORK_INDENT11196
MI/2025-26/LI/WORK_INDENT11196
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
Minor Irrigation Division Bellary
5 documents required · 5 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily completed (at least 90% of contract value) in the last five years (i.e. 2021-22 to 2025-26), as a prime contractor, at least one similar work such as Providing Lift irrigation work of value not less than Rs. 56.64 Lakhs. .The weightage of 10% will be given per year to bring them to the price level of the FY 2026-27.
Executed in any one year, during the last five years (2021-22 to 2025-26) the following minimum quantities of work 1.Earthwork in excavation and Desilting combined quantities : 543.00 Cum 2.Cement concrete including RCC and PCC in 608.00 Cum 3.Supply and Fabrication Reinforcement steel 25.90 Tonne 4.centrifugal pump Not less than 100 HP in Nos 1 No
Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5 - B) Where, A Maximum value of civil engineering works executed in any one year during the last five years i.e. 2021-22 to 2025-26 (updated to 2026-27 price level) taking into account the completed as well as works in progress. N, Number of years (11 months) prescribed for completion of the works for which tenders are invited. B, Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 11 months (11/12 (0.917) year i.e. period of completion of the works for which Tenders are invited.
Section 3, Qualification Information
Achieved in at least two financial years during the last five years (i.e. 2021-22 to 2025-26) a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.226.56 Lakhs.Financial turn over of previous years will be given a weightage of 10% per year to bring to them to the price level of the FY 2026-27.
Liquid assets and /or availability of credit facilities of not less than Rs. 31.14 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc
Contractor Registration certificate, Class 3 and Above,
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
The contractor shall quote the rates without adding GST either materials or works contract Service.GST payable by the Contractor under this works Contract will be paid to the Contractor separately over and above the Contractor s bid amount. The increase if any in the GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the Authority.
As per the Govt Ltr No MID/434/MISU/2025 Bangalore dt : 22.08.2025 the cost of work should not exced the grant provided of Rs. 140.00 lakhs for this work hence contractor shall note that, the work will not be awarded over the estimated amount of this work.
₹2,840
₹2 L
13 Apr 2026
4 Apr 2026
16 Apr 2026
10 Apr 2026
8 Apr 2026
Rejuvenation of Vyasanakere II stage II Lift LIS in HosapeteTaluk, Vijayanagara Dist.
CIVIL WORKS:Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations etc.,complete with all lead and lifts including loading and unloading an...
Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all ...
De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of al...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...
Providing and laying insitu vibrated M-15 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery,
Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labo...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Providing and applying grease of approved quality to gate and hoist components requiring greasing as part of the annual maintenance using grease gun wherever necessary including cost of all materials,...
Cleaning gates / hoists / embedded parts for re-painting by removing rust, old paint, grease by using wire brush, scrubber, rust remover including cost of all materials, labour, machinery, scaffolding...
Supplying and fixing rubber seals of approved quality including cost of all materials, labour, removing existing worn out / damaged bulb type rubber seals from gates, cleaning surface, ma...
Providing 50 mm deep cement mortar pointing to face stone masonry in CM 1 : 3 proportion by volume including cost of all materials, labour, raking-out and cleaning joints, pressing mortar into joints,...
Polyurethane based single Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based
acrylic PU di...
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all etc.,complete with all lead and lifts inc...
Treating severe Dampness & Rising dampness in walls Providing and Applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Repair Mortar on int...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...
Providing Sal wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges etc.,complete with all lead and lifts including loading and unloa...
Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key
trench, foundation of Buildings & Bridges and such similar works in all kinds of soils , as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The
granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt
crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved s...
ELECTRICAL AND PUMPING MACHINERY WORKS : Design, manufacturing, supply, errection, trail running, performance test and commissioning of centrifugal pump of approved make conforming to IS:12699 (1989) ...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Bolts / Nuts / Washers ( stainless steel )
Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months etc.,complete with all lead and lifts including loading and unloading and as per specifiction with the ...
Providing thrust bearing as per ISI specifiction with guarantee period of not less than 12 months etc.,complete with all lead and lifts including loading and unloading and as per specifiction with ...
Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months HORIZANTAL PUMP etc.,complete with all lead and lifts including loading and unloading and...
BEARING FOR HORIZONTAL PUMP For 100 to 150HP pump bearing
Providing terminal plate as per ISI specifiction with guarantee period of not less than 12 months etc.,complete with all lead and lifts including loading and unloading and as per specifiction with th...
Water Treatment Plants HORIZANTAL PUMP ALL TYPES-For Pump open & refitting after repairs etc.,complete with all lead and lifts including loading and unloading and as per specifiction with the directio...
Supplying P-2 Class R.C.C spun pipes ( safe for 4 kg / cm2 test pressure) to work spot including cost of all materials, machinery, labour, taxes, duties, levies, royalty & all necessary works as appli...
laying and jointing nP- 2 class hume pipes in CM 1 : 2 proportion by volume including cost of all materials (excluding pipes and collars),labour, aligning pipes, batching and mixing mortar, pack...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make bodyand seat ring of bronze PN 1.0 conforming to IS: 14845 of specified diameter with all fixturesincluding cost of ...
Supplying anddrawingFlexibleMulticoreCablemanufactured with electrolytic grade flexible copper with low conductor confirmingtoIS8130-1984and(Virgin)PVCinsulation sheathed suitable for working voltage ...
Providing and fixing of DI Double flanged wafer type (Concentric) /double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel ...
Work of rewinding of HV side upto 100KVA power transformer as specified below: a.Switch off Power supply of transformer Isolator feeder and discharge with discharge rod. b. Disconnect the input an...
Work of repairing and overhauling of upto 400 amps LT breaker bus coupler as specified below: Complete dismantling of breaker units of 400 amps, breaker of compressor room taking out the fixed and mov...
Work of replacement of faulty control components and modification and rewiring of soft starter panel upto 1250KW/6.6KV motor as specified below: a. Disconnecting the power cables and control cables....
Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12...
Work of supply, erection and commissioning of indoor upto 250 Amps distribution panel as specified below: Supply, erection and commissioning of Indoor type upto 250 Amps MCCB distribution panel with o...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work
completion and liability period etc', having rectangular shape of 1.20m x 0.90m size ma...
Man Power: Engaging Pump operator for Pump Operation at Jackwell for engaging one operator for day and one operator fore night
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-4 vyasanakere ii stage ii lift.doc
Tender Document • 26.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .