Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹34.8 L+₹2.4 L (7.38%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹34.8 L+₹2.4 L (7.42%)Rejected-Finance AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹36.7 L+₹4.3 L (13.3%)Rejected-Finance 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹43.6 L+₹11.3 L (34.8%)Rejected-Finance 23 47 25D BHAGABARI ROAD ALLAHPUR ALLAHABAD UP | AGRA | UTTAR PRADESH | 282001 | L5 | Rejected-Finance Being L5 |
Tender Value
₹43.3 L
EMD Value
₹86,600
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
Provn of waste MGT infra at old cant Prayagraj.
2023_MES_595971_1
8646/E8
Open Tender
Civil Works
Item Rate
180 days
Prayagraj
AS Per NIT
8 documents required · 8 mandatory
₹500
GE (East) Allahabad
₹86,600
Yes
24 Jun 2023
17 May 2023
16 Jun 2023
17 May 2023
14 Jun 2023
31 May 2023
Amount
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete as specified and directed.
M&L for PCC 1 : 4 : 8 Type D2 ( using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cm 1:4, finished even and smooth without using extra cement complete all as specified and directed .
M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:6, finished even and smooth without using extra cement complete all as specified and directed .
M&L for preparation of new plastered surfaces of wall and applying 2 coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying 2 coats of cement base paint complete all as specified and directed
Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed.
M&L for removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.
M&L for excavation in post holes or similar holes, each n.exc 0.50 Cum and getting out in soft/loose soil including returning, filling in and ramming earth etc , removing surplus soil to a distance n exc 50 M and making good surface complete all as specified and directed.
M&L for PCC 1:2:4 Type B-2 (using 40 mm graded stone aggregate) as in foundation fillig and mass concrete complete all as specified and directed.
Surface excavation n.exc 30 cm deep and averaging 24 cm deep and getting out in soft and loose soil complete all as specified and directed.
M&L for hardcore of broken stones or boulders not exc 15 cm thick of gauge not exc 63 mm, deposited, sprayed and levelled in layers not exc 15 cm thick watered and rammed to a true surfaces, complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 Type C-2 (using 40 mm graded stone aggregate) in subbase for flooring, finish surface even and rough to receive toping layer of floor complete all specified and directed.
M&L for 25 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) in floor, finish surface even and smooth without using extra cement complete all as specified and directed.
S&F coloured pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F coloured pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.
M&L for RCC ( Design Mix) , M-25 grade (using 20 mm grade aggregate) as in foundations, footings, foundation beam,plinth beams and bases of columns basement slabs, and mass concrete complete all as specified and directed.
M&L for RCC ( Design Mix) , M-25 grade(using 20 mm grade aggregat) as in columns pillers, piers, posts and struts complete all as specified and directed.
M&L for form work to sides of concrete foundation, footings, bases of column plinth beam etc, vertical or to batter, rough finished surfaces of concrete, flat surface complete all as specified and directed.
M&L for form work to sides of concrete foundation, footings, bases of column plinth beam etc, vertical or to batter, rough finished surfaces of concrete, curved surface complete all as specified and directed.
M&L for form work to sides of pillars, posts, struts, piers, columns, fair finished surface of square, rectangular section rough finished surfaces of concrete, flat surface complete all as specified and directed.
S&F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clipscomplete all as specified and directed.
S & F TMT steel bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or with securing clips complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded aggregate ) in leveling course, finish surface even and rough to receive toping layer of floor complete all specified and directed.
M&L for machine cut kota stone slab flooring 18-20 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including cement screed bed or bedding layer ,15 mm thick or bedding layer CM 1 : 6 complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floors and pavings complete all as specified and directed.
M&L for Forming Contraction (Dummy), joints 65mm deep x 10mm wide, filled with sealing compound, Grade 'A' complete all as specified and directed.
M&L for Forming Contraction, joints 30mm deep x 10mm wide, filled with sealing compound, Grade 'A' complete all as specified and directed.
Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.
M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and directed.
M&L for mild steel work in roof trusses (Framed), trussed, Purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleats etc.,conforming to Fe 410-W-(Gde-E-250) Quality A complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.
S&F plastic dividing strips, 38 mm wide and 1.5mm thick complete all as specified and directed.
M&L for 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floors, finishing the suface even and smooth without using extra cement etc. complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing surface even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coat of Synthetic enamel paint over a coat of red oxide, primer complete all as specified and directed.
Surface excavation n.exc. 30 cm deep and averaging 7.5 cm deep and getting out in soft/ loose soil complete all as specified and directed.
Spreading and levelling excavated earth in layers n exc. 25 cm thick and well ramming including watering as required below flooring complete all as specified and directed.
Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
Supply and laying burnt clay bricks, class 'B', old size, laid in trenches for cable protection with length of brick equal to width of trench, complete all as specified and directed.
Supply and spreading of natural, clean and dry river sand in trenches 8cm before laying of cable & 15cm after laying of cable for cable cushioning, including punning the sand upto 18cm thicknes and consolidated, complete all as specified and directed. NOTE: Punned thickness shall only be measured and paid.
Supply, laying and testing XLPE aluminium conductor power cable (Heavy Duty) , PVC insulated, armoured , 1100 Volt grade cross size 50sqmm 3.5 core, fixed to pole/ walls, complete all as specified and directed.
All asper item No. 45 above but size 35sqmm 3.5 core
All asper item No. 45 above but size 16sqmm 4 core
All asper item No. 45 above but size 6sqmm 2 core
Bore hole for passing cable through / insertion of 100mm dia GI pipe under PCC road/ taxi track/ runway/ hard standing (without damaging the surfac), upto the depth 450mm to 1200 mm complete all as specified and directed. NOTES :- (i) Cost of equipments, tools & plants, material required for boring shall be deemed to be included in unit quoted rates above. (ii) GI pipe 100mm dia shall be measured and paid separetely.
Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI strip of size 32x6mm by means of bolts, nuts, washers of galvanised iron or steel, protected by 40mm dia GI pipe 'light grade', with meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40mm thick pre-cast RCC cover (1:2:4), type B-1 (using 20mm graded crushed aggregate) mix with 8mm dia MS bars @75mm c/c both ways, mild steel handle 12mm dia, PGI funnel and wire mesh, 15mm dia GI pipe 'medium' grade(ISI marked) for watering, etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- The quoted rates shall also deemed to include the cost of Earth Test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode.
S&F LED flood light fitting/ luminaires 80 watt in powder coated with aluminium die cast housing and frame, high efficiency, long life LEDs, loop in loop out connector, toughned glass cover and IP 66 protection complete assembly with LEDs driver and accessaries pre wired up to terminal block in control gear compartment including connection on pole or building complete all as specified and directed.
S&F 50mm bore ,GI pipes, light grade, ISI marked, galvanised, laid in trenches / fixed to walls / ceilings or laid in floors / laid in ducts / laid under road crossing for cables protection, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), complete all as specified and directed. NOTE:- Necessary excavation and earthwork for GI pipe shall be measured and paid separately under respective items of this Schedule.
M&L for concealed point wiring in PVC conduit with 1.5 sqmm (nominal area), single core copper conductor including non metallic PVC conduit not less than 20 mm dia, pressed steel terminal boxes (not less than 1.6 mm thick of reqd size,factory made) with 3 mm thick plastic laminated sheets top cover of required colour, painting terminal boxes inside and outside with two coats of block bituminous paint over a coat of red oxide primer complete with all accessories and including, 1.5 sqmm (nominal area) PVC earth wire , connected to earth dolly, drawn in same concealed conduit, making good disturbed surfaces and finished to match with existing surface complete for One light/fan/exhaust fan point controlled by one switch as specified and directed.
All asper item No. 55 above but for One 5 amp socket outlet point on an independent board with 2.5 sqmm (nominal area) cable
All asper item No. 55 above but for One 5 amp socket outlet point on same board
All asper item No. 55 above but for One 15 Amp socket outlet
S&F switch piano, single pole one way 5 Amps 240 Volt capacity, flush type complete all as specified and directed.
S&F 5 pin 5 Amps 2 in 1 socket outlet 230volt, flush type complete all as specified and directed.
S&F switch piano, single pole one way 15/16 Amps 240 Volt flush type complete all as specified and directed.
S&F 6 pin 15/16 Amps socket outlet, flush type multi purpose 2 in 1 type complete all as specified and directed.
S&F ceiling rose of suitable size of bakelite 240 Volts three terminal complete all as specified and directed.
S&F Sheet metal enclosure for Double Door DBs SPN (single pole & neutral), 8 way ,240 volts with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, with incoming/outgoing connection through proper size of lugs and cable glands, complete all as specified and directed
S&F MCB, 6 to 32 Amps, SPN (single pole & neutral ), 240 volt , 'C' curve, with rupturing capacity 10 KA , inculding providing thimble for out going cable complete all as specified and directed .
S&F MCB, 6 to 32 Amps, SP (single pole), 240 volt , 'B' curve, with rupturing capacity 10 KA , inculding providing thimble for out going cable complete all as specified and directed .
S&F 1x18W LED wall mounted tube light fitting LED fitting LED 6000K, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient, complete with all accessories prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed .
S&F Sheet metal enclosure for Double Door DBs TPN, (triple pole & neutral) 4 Way, 415 V, IP-43 IK-09 protection, with 200 amps rated bus bar and neutral link complete with incoming/outgoing connection through proper size of lugs and cable glands, in repair, complete all as specified and directed
S&F MCCB TPN 63 Amp, 415 Volt, conforming to 'C' curve, 16 kA breaking capacity, complete all as specified and directed.
S&F Junction box for light control made of PVC/SMC box size and connected MCB SP 20 Amps including clamp, nut, bolt ans all fixing accessory, complete all as specified and directed.
M&L for sub main wiring with 2 runs of 6.0 sq.mm copper conductor cable (for phase, neutral) and one run as earth continuty wire (green cloour),drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc and connecting terminal ends to DB's, and earth continuity conductor connecting to common earth dolly, and making good disturbed surfaces to match with existing , complete all as specified and directed. NOTE :- (i) Two run of submain wiring, one run of earth wire (copper conductor), and one run of PVC conduit with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive. (iii) Single core PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable shall only be used
S&F industrial wall mounted plug socket suitable for IP 67 degree of protection 63 Amp rating 3P+N+E complete all as specified and directed .
KRISHNA BAHADUR
M/S A P CONSTRUCTION
Mohit Enterprises
Shivagya Engineering
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .