The work of release new connection/LT/11 KV line erection/shifting of 33 KV line in deposit scheme on Semi Turnkey basis.

Amount

Supply of Material by the Contractor as per relevant ISS :-

Stone Pad

Earthing Rod Complete 2540x20 mm

Stay Clamp

Danger Board with clamp and N&B

Barbed wire

Number Plate

Stay Set 16x1800

Stay Set Complete

Earth wire clamp with N&B

DP Clamp

PG Clamp

Cabel Jointing Kit 11 KV 3x 70 sqmm OD

Cabel Jointing Kit 11 KV 3x 70 sqmm ID

Clamp for LT Tee-off Channel with N&B

MS Top Channel 125x65x6x2240 mm

T-Channel 125x65x6x1300 mm with clamp

Nut Bolt & Washer

F Bracket Clamp

Dead And Clamp

Suspension Clamp

I Hook with Clamp

AL. Tape (0.77x6.4 mm)

AL. Lug Long Barrel, off size

4 Core LT MCB Box

Guarding Angel Clamp

MS Angle Iron 65x65x6x4300 mm Bracing with for clamp

Al. Paint

Red Oxide Paint

Holding Clamp For T/F, Top & Dropper and Dropper Channel with N&B

Distribution Box Clamp

Distribution Box 1 Phase

Distribution Box 3 Phase

Piercing Connector

Copper L-Piece 62x225x12 sqmm

Copper L-Piece 50x225x10 sqmm

LT Clamp with N&B

11 KV Fuse Set

11 KV Cross Arm Clamp

LT Incoming Panel with Metering Equipment

G.I. Pipe 6" Dia

G.I. Wire 6 SWG

Safe Carriage of following material from Electricity Store Center Etah to pit site of work from the Kaccha & Pakka Road including loading & unloading at the respective ends including the cost of arrangement of labour, T&P etc. which required for poper completion of work (Distance 0 to 60 kms.)

T/F Base Angle with Clamp 65x65x6x2028 mm

Stay wire 7/10 SWG

GI wire 8 SWG

MS Top Channel 100x50x5x2240 mm

Guarding Angel with Clamp, Nut & Bolt 50x50x6x1600 mm

M.S. Dropper Channel 100x50x5x2028 mm

11 KV TPMO with Polymer Insulator

11 KV Cross Arm V Type

11 KV Pin Insulator with Pin, N&B

33 KV Pin Insulator with Pin, N&B

11 KV Disc Insulator

11 KV Disc fitting

ABC 3x95 (PH)+1x70+1x16

LT ABC 3x120+1x70+1x16

AB Cable 1x16+1x25 sq mm

AB Cable 3x50+1x35+1x16 sq. mm

Cable HT XLPE 11 KV 3x120 sq. mm

11 KV XLPE Cable H.T. 3x70 sq. mm

PVC Al. Cable 3x70 sq. mm

LT AL. XLPE Cable 1x400 sq. mm

33 KV XLPE Cable 3x300 sq. mm

Cable Jointing Kit 11 KV 3x 120 sq. mm OD/ID

Cable Jointing Kit 33 KV 3x 300 sq. mm OD

LT XLPE Cable AL1x240 sq. mm

25 KVA 11/0.4 KV T/F

63 KVA 11/0.4 KV T/F

100 KVA 11/0.4 KV T/F

10 KVA 11/0.25 KV T/F

250 KVA 11/0.4 KV T/F

PCC Pole 8.5 mtr. Long

PCC Pole 9 mtr. Long

ST Pole SP-55 11 mtr. Long

G.I. Wire 4mm/8 SWG

G.I. Wire 10 SWG

ACSR Dog conductor

ACSR Weasel conductor

Modem

11 KV CT/PT Pole mounting metering unit (CTR10/5A)

3 Ph.-4w Static LT TVM with Metering Cubical

Pilfer proof 11 KV CTR 10/5A

Cable LT PVC 4x16 sq mm

Al. armoud cable 3.5x70 sq. mm

Cable Al. conductor 2x4 sq. mm armoud

Erection of Material

Erection of single support including complete H.T/L.T fittings PCC Pole 8.5 Mtr including Grouting & Muffing of pole per DVVNL/RESPO norms.

Erection of single support including complete H.T/L.T fittings PCC Pole 9 Mtr including Grouting & Muffing of pole per DVVNL/RESPO norms.

Erection of Single Support including complete H.T/L.T fittings etc. S.T. Pole 11 Mtr SP-55 including Grouting & Muffing of pole per DVVNL/RESPO norms.

Erection of Double Support including complete H.T/L.T fittings etc. S.T. Pole 11 Mtr SP-55 including Grouting & Muffing of pole per DVVNL/RESPO norms.

Erection of Tri Support including complete H.T/L.T fittings etc. S.T. Pole 11 Mtr SP-55 including Grouting & Muffing of pole per DVVNL/RESPO norms.

Erection of Double support including complete H.T/L.T fittings PCC Pole 8.5 Mtr including Grouting & Muffing of pole per DVVNL/RESPO norms.

Installation of 11 KV TPMO with polymar Insulator

Erection of stay set complete including the work of nuzzling etc.

Erection of Earthing rod complete

Laying sagging stringing, binding and jumpering ACSR Weasel conductor

Laying sagging stringing, binding and jumpering ACSR Dog conductor

Painting of Pole by AL. Paint & Rad Oxide Paint

Laying & Termination of AB Cable 3x95 (PH) +1x70+1x16

Laying & Termination of LT AB Cable 3x120+1x70+1x16 sqmm.

Laying & Termination of AB Cable 1x16+1x25 sqmm.

Laying & Termination of AB Cable 3x50+1x35+1x16 sqmm.

Laying and Termination of 11 KV Cable HT XLPE 3x120 sq. mm

Laying and Termination of 11 KV Cable HT XLPE 3x70 sq. mm

Laying and Termination of PVC AL. Cable 3x70 sq. mm

Laying and Termination of LT AL. XLPE Cable 1x400 sq. mm

Laying and Termination of LT PVC Cable 4x16 sq. mm

Laying and Termination of AL. Armoured Cable 3.5x70 sq. mm

Laying and Termination of Cable AL. Conductor 2x4 sq. mm Armoured

Laying and Termination of LT AL. XLPE Cable 1x240 sq. mm

Laying and Termination of 33 KV XLPE Cable 3x300 sq. mm

Laying and Termination of GI wire 4 mm/8 SWG

Laying and Termination of GI wire 6 SWG/10 SWG

Installation of Modem

Erection/Fixing of Copper L-Piece 50x225x10 sq. mm & 62x225x10 sq. mm

Laying and Termination of Stay wire 7/10 SWG

Installation of 11 KV Fuse Set

Installation of Distribution Box 1 Phase/3 Phase

Installation of Danger Board

Installation Barbed wire including jumper

Installation of 10 KVA T/F 11/0.4 KV New at site in all respect

Installation of 25 KVA T/F 11/0.4 KV New at site in all respect

Installation of 63 KVA T/F 11/0.4 KV New at site in all respect

Installation of 100 KVA T/F 11/0.4 KV New at site in all respect

Installation of 250 KVA T/F 11/0.4 KV New at site in all respect

Installation of 11 KV Cable Jointing Kit I/D & O/D 3x70 & 3x120 sq. mm

Installation of 33 KV Cable Jointing Kit O/D 3x300 sq. mm

Installation of T/F Base Angle with Clamp 65x65x6x2028 mm

Installation of Guarding Angel with Clamp, Nut & Bolt 50x50x6x1600 mm

Installation of 11 KV CT/PT Pole Mounting Metering Unit CTR 10/5A

Installation of 4 core LT MCB Box

Installation of 3 Phase-4W Static LT TVM with Metering Cubical

Installation of Pilfer Proof 11 KV CTR 10/5A

Construction of 250 KVA T/F plinth for size 2x2x1.5 M with the help of first class brick and masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely as per norms with RCC top 1:2:4 cement, sand coarse and stone grit with MS Bar and MS channel for resting transformer wheel (100x50x6mm) and plaster. All material shall be provided by the contractor.

Providing and erection of welded wire mesh fencing around transformer plinth with MS Angle of size 40x40x6 mm length and 1.20 mtrs height. Such panels shall be supported on MS angle from of size 40x40x6 mm having 04 nos corner supports of height 1.65 mtrs including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc for locking arrangement as per drawing and specifications. The fencing will be painted in the green colour synthetic enamel paint after painting with one coat of red oxide primer. The rates should be inclusive of all materials required for completion of above work. (Length of each fencing approx. 11 mtrs) with T& P labour etc. All material shall be provided by the contractor.

Pipe earthing up to water level of 250 KVA medium Power Transformers (Body & Nutral). All material shall be provided by the contractor.

Charges for Dismantling Work:- Work includes dismantling from site and cartage of same materails from site/location to central store as per instruction of JE/SDO/EE concerned.

Old Rail Pole

Iron Scrap (Cross Arm with Clamp & Pin)

Dog Condctor Scrap

11/0.4 KV 63 KVA T/F old

shiva engineering AND suppliers (BID ID -5063489)