PROVN OF GUARD ROOM AT 13 THIMMAYA ROAD UNDER GE (WEST) LUCKNOW

Amount

Surface excavation n. exc 15 cm deep and gettingout in soft /loose soil complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etc for foundation etc and getting out in any type of soil complete all as specified and as directed

Ditto -as item No 2 Above but exc 1.5 Mtr depth but n.exc 3.00 Sqm Depth complete all as specified and as directed

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass complete all as specified and as directed

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and as directed.

M&L 40 mm thick damp proof course in 1:2:4, type B-0 to horizontal or vertical surfaces incl necessary form work complete all as specified and as directed

Returning filling in and including spreading levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and as directed

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L RCC M-25 (Design mix), using 20mm graded stone aggregate as in foundations, including rafts,footings, foundation beams ; plinth beams; bases for columns, etc. basement slabs,under-reamed piles and mass concrete complete all as specified and as directed

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter of rough finished of concrete surface complete all as specified and as directed

M&L RCC M-25 (Design mix) (20 MM graded stone ) as in Columns, pillars, piers, posts and struts complete all as specified and as directed

M&LFormwork to sides of pillars,posts, struts, piers, columns and stanchions complete of rough finished of concrete surface complete all as specified and as directed

M&L RCC M-25 (Design mix), (20 MM graded stone ) as in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and as directed

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc.of rough finished surfaces of concrete flat complete all as specified and as directed

M&L RCC M-25 (Design mix) (20 MM graded stone ) as in Chajjas complete all as specified and as directed

Formwork to chullah hoods, chajjas,troughs and similar items including edges of rough finished of concrete surfaces complete all as specified and as directed.

M&L RCC M-25 (Design mix) (20 MM graded stone ) as Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) of rough finished of concrete surfaces complete all as specified and as directed

M&L Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm complete all as specified and as directed

S & F for MS TMT bars 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed

All as per above Srl item No 20 here-in-before but but 8 mm dia in stirrups, spacers and binders etc complete all as specified and as directed

M & L for 10 mm thick rendering cement plastering on fair faces of brick work or concrete surfaces 1:4 and finished even and smooth (without using extra cement) complete all as specified and as directed

M&L Rendering 15 mm thick cement plaster in CM 1:6 with on other than fair faces of brick work or concrete surfaces of walls/facias mixed with WPC as specified (WPC measured and paid separatly) and finished even and smooth without using extra cement complete all as specified and as directed

Supply only integral water proofing coumpound conforming to IS-2645 complete all as specified and as directed.

M&L Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including Providing and applying 3mm thick Exterior wall care putty on wall complete all as specified and as directed

M&L preparing surface plastered or un plastered surface and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work with priming plastered and other surfaces with alkali?resistant priming pai complete all as specified and as directed

M&L for 3mm thick wall care putty on wall complete all as specified and as directed

Earth filling under floor Spreading and levelling in layers n exc. 25 cm thick ramming including watering as required complete all as specified and as directed Note- qty reused from item no-08 removal of earth

M&L hard core of broken bricks of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to true surface complete all as specified and as directed

M & L for 75 mm thick PCC 1:4:8, type D2( using 40mm graded stone aggrtegate) as in sub base etc complete all as specified and as directed.

S&F Non skid joint free coloured ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors conforming to IS-13712 grade B-II-(a), set and jointed in neat cement slurry and pointed in white or coloured cement to match including the surface 15 mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and as directed

S&F glazed ceramic coloured tiles of size 600x1200x 8 to 10 mm thick in vertical surfaces of wall conforming to IS-13712 grade B-III, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including screed bed layer 10mm thick in cement mortar 1:4 finished even and rough for receiving tiles on vertical surface complete all as specified and as directed

M&L Double charged (Coloured) Virified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed bedding layers in CM 1 :4 complete all as specified and as directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant complete all as specified and as directed

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars) with edges of sash bars and framing moulded chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed

S&F 8 to 10 mm dia anchor fastner of lentgh exc 75 mm but n. exc 150 long including drilling holes in concrete/masonary walls/ stucture using electrically operated drill machine ccomplete all as specified and as directed Note-Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt.

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 110 x 45 mm & sash 40 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed Note-1. Glazed shutters float glass thickness not less than 5.00 mm and wire mesh shutter with Stainless steel (SS-304) wire mesh 0.36 mm dia with aparture 1.4mm shall also be deemed included in quoted rates and No extra payment will be made separalely 2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F Powder Coating (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F 4.0 mm thick figured glass,pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and as directed

S&F Brass handles,150mm thick cast type, polished bright complete all as specified and as directed

S&F 150 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed

S&F 250 mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed

S&F Brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

Supply and fixed vitreous china table top wash hand basin white of size 530x420mmx140 mm , CP waste coupling with bottle trap suitable lengh with socket, including CP Bottle trap (300x190mm complete all as specified and as directed.

S & F vitreous china wash down water closet Rimless bowl with side Flush cistern for coupled WC,UF soft close seat cover,hinge,conversion bend, single flush cistern fittings and fixing accessoried, size 360 x 730 x 740 mm, single piece complete all as specified and as directed.

S & F 15 mm bore WHB Mixer CP brass single lever tall boy with 180 mm extension boy fixed spout without popup waste system with 600 mm long braided hoses complete all as specified and as directed

S & F CP brass bib taps 15mm bore pipe with wall flange complete all as specified and as directed.

S & F in repair Angle valve chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.

S & F in repair CP brass soap dish recessed type (Stainless steel) type of fixed with screw to wall complete all as specified and as directed

S & F in repair hand shower (Health facut) with 1.20 M long flexible tube with wall hook bracket etc, complete all as specified and as directed.

S & F in repair stainless steel toilet paper holder Recessed type with wall hook bracket etc, complete all as specified and as directed

S & F in repair stainless steel Tabular Towel Rail, 600 mm long complete all as specified and as directed

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long complete all as specified and as directed

S & F glass corner shelves fancy type 6mm thick size and fixed over CP brass brackets complete all as specified and as directed

S & F Vetrious china Urinals with fixing accessories,size -385x325x635 with urinals waste coupling etc complete all as specified and as directed

S&F rectangular/curved shaped urinal partition of size 900x450 mm with 8 to 10 mm thick frosted glass and chrome finished fixing with suitable CP locking arrangement complete all as specified and as directed

S&F Urinal spreader of CP for fixing with 15 mm dia pipe complete all as specified and as directed

S & F stainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed.

S&Finslalation of shower panel 1600x 200 mm with dual tone aluminium body, inbuilt ABS top shower with 60 nozzles, 02 Nos moveable ABS body massage jets, hand shower with flexible hose with brass spout divirter with theramstaic technology smart water mixing diverter. 40 CM stainless steel braided hose and working minimum 2 bar water pressure complete all as specified and as directed

S&F 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes erect as in cubical shape with complete fixing all complete all as specified and as directed

S&F Rotational moulded polyethene Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed

S&F Ball Valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed pf bore of dia of pipe 20 mm (minimum wt 210 gm) complete all as specified and as directed

S&F 100 mm bore floor traps 'P' or 'S' type complete all as specified and as directed

M&L Supplying and laying of CPVC pipes of outer diameter 20 mm,SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified and as directed

M&L Supplying and laying of CPVC pipes of outer diameter 25 mm,SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified .

S&F CPVC Brass Elbow 20 mm dia complete all as specified and as directed

S&F CPVC Brass Elbow 25 mm dia complete all as specified and as directed

S&F CPVC Brass Elbow (3/4 X ½) 20 mm dia complete all as specified and as directed

S&F CPVC Brass Tee 20 mm dia complete all as specified and as directed

S&F CPVC Brass Tee 25 mm dia complete all as specified and as directed

S&F CPVC Male Brass Threaded Adaptor (MTA/ MBTA) 20 mm dia complete all as specified and as directed

S&F CPVC Male Brass Threaded Adaptor (MTA/ MBTA) 25 mm dia complete all as specified and as directed

S&F CPVC Female Brass threaded Adaptor (FTA/ FBTA) 20 mm dia complete all as specified and as directed

S&F CPVC Female Brass Threaded Adaptor (FTA/ FBTA) 25 mm dia complete all as specified and as directed

S&F CPVC Tank Adaptor 25 mm dia complete all as specified and as directed

S&F CPVC UNION 20 mm dia complete all as specified and as directed

S&F CPVC UNION 25 mm dia complete all as specified and as directed

M&L 75 MM Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed

M&L 100 MM Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed

M&L for rubber moulded coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors as with mixer of white & grey cement in equal proportion and no pigment incl 20 mm thick screed bed bedding in CM 1:4 complete all as specified and as directed.

M & L for Providing cement concrete 1:2:4, Type B-1 (20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed

M&L Precast reinforced Cement Concrete Slab for manhole cover of type B-1, 1:2:4 using 20 mm graded crushed stone agg complete all as specified and as directed

M&L 150 mm dia Sail-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed

M&L concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested; using cement concrete 1:3:6 type C2 as in 150 mm dia complete all as specifed and directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F 75 mm bore PVC (SWR) pipes, single socketed in any length witlh rubbeer ring jionts, fixed to walls with PVC holding clamps complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radious complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radious complete all as specified and as directed.

S&F 110 mm PVC (SWR) branch piece,double (double Y) equal or unequal complete all as specified and as directed.

M&L On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc, complete for 10 Users complete all as specified and as directed

M&L Soakage wells of size 1.80 Mtr dia x 4.50 Mtr (effective Depth) incl excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and as directed

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing drawing complete all as specified and as directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed

M&L 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) as in screed plaster and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

ANTI-TERMITE TREATMENT treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed

ANTI-TERMITE TREATMENT Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed

ANTI-TERMITE TREATMENT Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed

ANTI-TERMITE TREATMENT treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed

M & L for 15 mm thick rendering in CM 1:4 using 100% course sand on roof surfaces with WPC @ 3% by weight of cement provided as floating/setting coat of cement complete all as specified and as directed Note :- WPC shall be measured and paid seperately

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (b) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (c) M&L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and as directed.

S&F in repair fancy type 25mm dia stainless steel curtain rods/Cupboard hanging rods including bracket/junctions /wall to wall and with rings of best quality as complete all as specified and as directed

Material & Labour for providing and fixing stainless steel (Grade 304) guard bar made of hollow tubes,channels, plates etc., including welding, grinding, uffing, polishing and making curvature (where ever equired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the grill with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size,complete all as specified.

S&F and testing 'Medium grade',galvanised tubes ,fixed to wall/ceiling or laid in floor/trenches etc. with all fitting like suitable tee.sockets,bend unions etc complete all as specified and as directed (a) 40mm bore

All as per item No 111 above 25mm bore complete all as specified and as directed

Cutting existing steel tubing for alterations or additions including screwing/threading complete all as specified. (a) 40mm bore

All as per item No 114 above 25mm bore complete all as specified and as directed

Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20 mm, All as per item No 111 above 25mm bore complete all as specified and as directed

S&F Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed (a) 25mm bore

All as per item No 118 above 40mm bore complete all as specified and as directed

M & L for Point wiring complete with 1.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through existing rigid non metalic PVC conduit and conduit accesseries fixed on surface of walls/ceiling pressed modular metal flush box 1/2 module to 6 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer plasticalong with white cover plate with plate up to 6 module for housing modular switches, and sockets 1.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly all as specified for :- (Modular frame and plates will paid seprately) (a) One light/fan point controlled by one switch

One socket out let point 5 pin, 5 Amp on an independent board complete all as specified and as directed

Same as item No 121 but one socket on the same board complete all as specified and as directed

All as per item 121 here in before but using 2.5 sq mm PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board complete all as specified and as directed

S&F modular switches 1 way 6A,1 module, complete all as specified and as directed

S&F modular switches 1 way 16A,1 module, complete all as specified and as directed

S&F modular 6 A sockets-2/3 pin combine 2 module complete all as specified and as directed

S&F modular 6A/16A sockets-2/3 pin combine 2 module complete all as specified and as directed

S&F Modular white cover plate with frame 8 module complete all as specified and as directed

S&F Modular white cover plate with frame 6 module complete all as specified and as directed

S&F Modular white cover plate with frame 3 module complete all as specified and as directed

S&F Modular white cover plate with frame 1/2 module complete all as specified and as directed

S&F ceiling rose surface bakelite three terminal complete all as specified and as directed

Supply & fix modular fan regulator 120W, 2 Module for ceiling fan fixed, in board and connecting as directed, after dismantling and removing unserviceable regulator complete all as specified and as directed

S&F MCB single pole 10 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and as directed

Ditto as item No 136 herein before but 32-40 Amp, 240 volts, single pole & neutral complete all as specified and as directed

S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 8 way double door type , 240 volts complete all as specified and as directed

S&F modular type sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed

M&L for two single core PVC insulated cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit complete all as specified and as directed. Note:- PVC Conduit and accessories shall be deemed to be included in the quoted rate

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and as directed

S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs to operate on 230 volt AC, vertical type including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity complete all as specified and as directed

Supply and fixing of heavy duty plastic body exhaust fan single phase 230/240 volt of size 250 mm sweep including holes of suitable size grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076mm, complete all as specified and as directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed

S&F LED Building security light 35Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and as directed

M/S S S A ASSOCIATES

M/s Sudhir Enterprises

M/S KAUSHIK CONSTRUCTION

M/s Ramesh Chandra

SAAR CONSTRUCTIONS

Spectrum Enterprises

M/s Bhadoria Associates

M/S PAVA ENGINEERS