REPAIR OF GI CHARPOY,REPAIR AND REPAINTING TO STEEL FURNITURE , REPAIR/RECANNING /POLISHING TO CERTAIN WOODEN FURNITURE OF OMQ, SMQ AND OTM ACCN AT AF STN THANE AND AF STN KHANERI HILL UNDER GE (AF) THANE

Amount

(A) Removal of following existing unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part in-tact and painting / polishing the disturbed portion, as applicable as per drgs. (B) Work will be executed where the furniture articles exist in different User Units of GE(AF) Thane including BSO's Furniture Yard as directed by Engineer-in-Charge. Above Note is applicable to all relevents items considered in BOQ.

Almirah Large Steel, Almirah Small Steel & Almirah Med Steel : FD-1031/67(M)/1032

S & F,in repair, 6 Liver Lock with Duplicate Key ,complete all as specified and as shown in drg and as directed by Engr-in-charge.( Ref drawing as shown in Srl Item No 1.02 above).

S & F, in repair, Stainless steel Handle ,150mm long ,complete all as specified and as shown in drg and as directed by Engr-in-charge. ( Ref drawing as shown in Srl Item No 1.02 above).

S & F, in repair, hings ,complete all as specified and as shown in drg and as directed by Engr-in-charge.( Ref drawing as shown in Srl Item No 1.02 above).

S & F, in repair, Leg of Almirah Large Steel ,complete all as specified and as shown in drg and as directed by Engr-in-charge. ( Ref drawing as shown in Srl Item No 1.02 above).

S & F, in repair, Leg of Almirah Small Steel ,complete all as specified and as shown in drg and as directed by Engr-in-charge.( Ref drawing as shown in Srl Item No 1.02 above).

S & F, in repair, shelves of Almirah Large Steel ,complete all as specified and as shown in drg and as directed by Engr-in-charge.( Ref drawing as shown in Srl Item No 1.02 above).

S & F, in repair, shelves of Almirah Small Steel ,complete all as specified and as shown in drg and as directed by Engr-in-charge. ( Ref drawing as shown in Srl Item No 1.02 above).

S&F,in repair, locking assembly set of Almirah Large Steel ,complete all as specified and as shown in drg and as directed by Engr-in-charge. ( Ref drawing as shown in Srl Item No 1.02 above).

S & F, in repair, locking assembly set complete of Almirah Small Steel ,complete all as specified and as shown in drg and as directed by Engr-in-charge. ( Ref drawing as shown in Srl Item No 1.02 above).

Chair writinng MAP/Chair steel with Arms and cushion seat and Back/ Chair visitor : GE/AF/SK/09/03, FD/E6/MAP/12,(TP - Make: Godrej and Durian)

S&F,in repair, upholstery of seat duly stiched as per exsiting upholstery of chair and drg and as directed by Engr-in-charge.( Ref drawing as shown in Srl Item No 2.00 above).

S&F,in repair, upholstery of back duly stiched as per exsiting upholstery of chair and drg and as directed by Engr-in-charge.( Ref drawing as shown in Srl Item No 2.00 above).

S&F,in repair, Arms ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 2.00 above).

Chair Computer/ Revolving with Arms/w/o Arms : FD/E6/MAP/01 , (TP- Make: Godrej and Durian)

S&F,in repair, star base ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 3.00 above).

S&F,in repair, castor wheel,complete all as specified and as shown in drg and as directed by Engr-in-charge.(Ref drawing as shown in Srl Item No 3.00 above).

S&F,in repair, hydrolic gas pump ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 3.00 above).

S&F,in repair, Arms ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 3.00 above).

S&F,in repair,upholstery of seat matching with existing ,complete all as specified and as shown in drg and as directed by Engr-in-charge.(Ref drawing as shown in Srl Item No 3.00 above).

S&F,in repair,upholstery of Back matching with existing ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 3.00 above).

Charpoy of GI Pipe with Ply top : (FD-220 ) , (FD/E6/MAP-II/01)

S&F,in repair, long rail with 32mm dia GI Pipe including both end threaded suitable for fixing elbow ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 4.00 above).

S&F,in repair, short rail made out of old broken long rail obtained from Srl Item No 4.01 above including both end threaded suitable for fixing elbow ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 4.00 above).

S&F,in repair,leg made out of old broken long/short rail obtained from Srl Item No 4.01 & 4.02 above including both end threaded suitable for fixing elbow ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 4.00 above).

S&F,in repair, GI Elbow 3 Way, 32mm dia ISI marked ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 4.00 above).

S&F,in repair, checknut ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 4.00 above).

S&F,in repair, plywood 12mm thick plywood boiling water proof (BWP) confirming to Grade 710 of size 1980 x 900mm to GI pipe frame by privifing 03 Nos of black painted flat Iron of size 40mm x 6mm length equal to width of GI Charpoy bending the flat iron the shape reqd to fix it tightly to GI Charpoy with the help of nut, bolt & washer of size 62-65mm & 6mm dia by drilling holes into GI pipe alongwith any welding if required . The plywood shall be fixed on the charpoy by drilling 16 Nos holes (03 nos each long Rail & 02 Nos on each iron flat ) & fixing it with nut bolt and washer of size 62-65mm and 6mm dia & tightening the complete frame ,,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 4.00 above). ( Ply wood MAKE :-NOVAPAN / ORCHID/KIT PLY/CENTURY/ARCHID

Chair verandah : FD-359/256

S&F, in repair, canning of seat of chair verandah with 3 mm wide cane plastic white ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 5.00 above).

All as per ser item No 5.02 above but canning of back.

S&F, in repair, Rubber shoe ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 5.00 above).

Chair Cane Bottom with Arms (CBA) Steel : FD-75(M)

S&F, in repair, Handle of chair CBA with 1st class teakwood to chair ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 6.00 above).

S&F, in repair, seat of chair ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 6.00 above).

S&F, in repair, back of chair ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 6.00 above).

M&L for cleaning of steel surface of chair CBA steel by scraping with emery paper, filling the holes where ever required for even and smooth surface and shall be painted externally with one coat of primer and two coat of synthetic enamel paint of approved shade and make ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 6.00 above).

Chair Cane Bottom (CB) without Arms Steel : FD- 75 (M)

S&F, in repair, seat of chair ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 7.00 above).

S&F, in repair, back of chair ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 7.00 above).

M&L for cleaning of steel surface of chair CBA steel by scraping with emery paper including filling the holes where ever required for even and smooth surface and shall be painted externally with one coat of primer and two coat of synthetic enamel paint of approved shade and make ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 7.00 above).

Table Office Officer Steel : (FD/84/1003)

S&F, in repair, top of table made up of 18/19mm thick prelaminated MDF board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination (Size of table top 1.68 mtr x 0.87 mtr), ISI marked of approved shade and make with 6mm thick teak wood beading all around ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 8.00 above).

S&F, in repair, box of set of three drawers of existing size ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 8.00 above).

S&F, in repair, lock with duplicate keys and making all drawers functional and locking as per standard pattern ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 8.00 above).

S&F,in repair,Table office Officer by necessary denting to deshaped portions and greasing to drawers ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 8.00 above).

M&L for cleaning the steel surface of table office officer by scraping with emery paper including filling holes wherever required for even and smooth surface and & shall be spray painted both internally & externally with one coat of primer and two coats of synthetic enamel paint of approved shade and make ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 8.00 above).

Table office clerk steel: (FD-1004)

S&F, in repair, top of table made up of 18/19mm thick prelaminated MDF board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination (Size of table top 1.2 mtr x 0.61 mtr ), ISI marked of approved shade and make with 6mm thick teak wood beading all around ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 9.00 above).

S&F, in repair, box of set of three drawers of existing size with central locking ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 9.00 above).

S&F, in repair, lock with duplicate keys and making all drawers functional and locking as per standard pattern ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 9.00 above).

M&L for cleaning the steel surface of table office officer by scraping with emery paper including filling holes wherever required for even and smooth surface and & shall be spray painted both internally & externally with one coat of primer and two coats of synthetic enamel paint of approved shade and make ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 9.00 above).

Adjustable Steel Rack with shelves

S&F,in repair,screw/bolt with washer of Adjustable Steel Rack as per site requirement ,complete all as specified and as directed by Engr-in-charge.

M&L for cleaning the steel surface of Adjustable Steel Rack with shelves by scraping with emery paper including filling holes wherever required for even and smooth surface and & shall be spray painted both internally & externally with one coat of primer and two coats of synthetic enamel paint of approved shade and make ,complete all as specified and as directed by Engr-in-charge.

Bed hard steel (MAP) : (FD/E6/MAP/08R)

S&F,in repair, Prelaminated particle board of head board of bed hard and providing 18/19mm thick plywood of size 634mm x 196mm BWR Grade as per IS - 303 approved specification covered both sides with laminate sheet of approved shade by Engr-in -charge including 18mm x 4mm thick 1st class teak wood beading all round the edges of ply,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 11.00 above). ( Ply wood MAKE :- NOVAPAN / ORCHID/KIT PLY/CENTURY/ARCHID

S&F,in repair,Prelaminated particle board of foot board of bed hard and providing18/19mm thick plywood of size 638mm x 314mm BWR Grade as per IS 303 approved specification covered both side with laminate sheet of approved shade by Engr-in -charge including 8mm x 4mm thick 1st class teak wood beading all round the edges of ply ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 11.00 above). ( Ply wood MAKE :- NOVAPAN / ORCHID/KIT PLY/CENTURY/ARCHID

S&F,in repair,Ply top of Bed hard steel and provinding ply top of 12mm thick of size 1974mm x 850mm BWR Grade as per IS 303 approved specification with fixing in position all as shown on drg with suitable size screws & cup washer ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 11.00 above) .( Ply wood MAKE :- NOVAPAN / ORCHID/KIT PLY/CENTURY/ARCHID

M&L for preparation of old steel surface of bed hard by scraping /rusting /denting and applying 1 coat of primer and 2 coats of synthetic enamel paint colour black in shade of approved make with spray painting ,complete all as specified and as shown in drg and as directed by Engr-in-charge. (Ref drawing as shown in Srl Item No 11.00 above).

TV Trolley : (FD/E6/MAP/15)

a) Removing unseviceable top and supply and fixing new top os size 750mm x600mm shall be made up of 18mm thick ply wood BWR grade of Make : Archid/Century/greenply) of with both side laminated with laminate sheet of MAKE :-NOVAPAN / ORCHID/KIT PLY/CENTURY/ARCHID of approved colour / shade as directed by GE / Engr -in -charge with polished 4 mm thick teak wood beading all rounfd the drg.

b) All as per item No. 12.01 here-in- before but sides of TV trolley of size 700mm x 500mm

c ) All as per item No. 12.01 here-in- before but back of TV trolley of size 700mm x 550mm

d) Removing old unserviceable castors wheel and supply qand fixing new castors wheel 50mm dia swivel types suitable for TV trolley all as shown on drg .

e) Removing old broken glass and supply and fixing two side movable 2 glass shutter of size 700mm x 275mm on almn channel fixed on front door alround . Glasses shall be of 5mm thick Make; Saint Gobin/modi Guard /swastik fixed with steel wheel of appropriate size for sliding channel irrespective of what shown on drg.

Locker bed side steel : FD-1029 supplying & fixing the following parts in replacement of the old existing unserviceable parts of the locker as approved , shown on drg & as directed by Engr- in- charge.

a) Removing old U/S 6 Liver Lock with S & F new 6 Liver Lock with Duplicate Key as shown in drg.

b) MS steel CP handles high quality 100mm long as per drg.

c) CP steel conduit 19/20mm dia hanging rod with brackets 16 guage as per drg.

d) Removing of U/S shelves of locker bed side steel and supply and fix new shelves of locker bed side steel all as shown as per drg.

Table 3'x2' with Drawer Steel: FD-1008

(a) Removing of U/S Table TOP and S&F New Table TOP as per Drg

(b) Removing of U/S Rubber Shoe and Supply and fix new rubber shoe as per drg

(c) Removing of U/S Drawer and Supply and fix new Drawer as per drg

Charpoy MS angle with hard Top :- (FD//MAP-II/01)

M & L removing off broken/unserviceable Ply top of Bed hard steel and S & F new ply top of 12mm thick of size 1974mm x 850mm BWR Grade as per IS 303 approved specification of MAKE :-NOVAPAN / ORCHID/KIT PLY/CENTURY/ARCHID with fixing in position all as shown on drg with suitable size screws & cup washercomplete all as specified and shown on drg and directed by Engr - in - charge.

b) M & L for preparation of old steel surface of bed hard by scraping /rusting /denting and applying 2 coats of synthetic enamel paint colour black in shade of Make : Berger/Nerolac/Asian with spray gun machine complete as directed by engt- in - charge.

M&L for spot welding of broken joints etc. Various steel furniture not exceeding 2.5cm in length including scraping, preparing surace of welded portion by grinding and buffing to make fit for painting and applying one coats of synthetic enamel paint over a coat of red oxide primer on welded portion to match with existing painting. FD-67,1031,1032, 106(M), 1038, 85,106, 129(M), 1038,,75(M), 84(M), 1003,1004,75,258,77(M), 1029, 257, 255, 208, FD/E6/MAP/02(R), FD/E6/MAP/05, FD-165(M), 1007, 1008, 1009,77, 1027,

Repainting of old painted surfaces of the following steel furniture and touching with red oxide primer where necessary prepairing surfaces and painting one coat SE paint/ powder coated paint as where required as per drg and directed by Engr-in-charge.

a).Almirah Large Steel: FD-1031/67(M)

b) Almirah Small/Medium Steel : FD-1032/67(M)

c) Locker Bed Side Steel :FD-1029

d) Chair verandah : FD-359/256

Table 3'X2' or 900X600mm with / without Drawer : FD-55/284/224/ 41(M)/283

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Long rail as per drg

d) Short rail as per drg

e) Long Stiffener as per drg

f) Short stiffener as per drg

g) Drawer as per drg

h) Knob as per drg

Table 3'X3' wooden :- FD-1009

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Long rail as per drg

d) Short rail as per drg

e) Long Stiffener as per drg

Table Dining for 6 / 8 persons : FD-239/273 FD-274

(a) Top made up of 18mm thick prelaminated MDF board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, ISI marked of approved shade and make with 6mm thick teak wood beading all around, all as specified and directed.

(b) Legs

(c) Long rail

(d) Short rail

Table Writing : FD-275

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Foot Rest as per drg

d) Stiffener as per drg

e) Sides of cabinet with 18mm thick ply wood with 1.5mm thick lamination as per drg

f) Short Rail as per drg

g) Front/Long Rail as per drg

h) Drawer as per Drg

j) Anodized Aluminium Knob as per drg

k) Cabinet Door with locking system

Peg Table : FD-384/277/236

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Short rail as per drg

d) Long rail as per drg

Table bed side :- FD/E6/MAP/15, FD-276

(a) M/L removing U/S old top/ sides of table bed side and supply and fix new top/side made out of 18 mm thick decorative pre-laminated MDF board exterior grade of approved shade and make with 6 mm TW beading all around (size of top 450x450mm) rest all as specified & directed).

(b) M/L removing U/S old back of table bed side and supply and fix new back of exisitng size made out of 12 mm thick BWR Grade plywood

(c) M/L for removing old U/S Knob from drawers of table bedside and supply and fix new decorative CP handle 75mmof approved design and make. rest all as specified and directed.

(d) M/L for removing U/S 18mm MS Square pipe and S&F new MS pipe duly powder coated in Chocobrown colour and fixing necessary PVC shoe

Table Centre : FD-274 / 235/29

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Front/Rear Rail as per drg

d) Side Rail as per drg

Teapoy : FD-278, 232, 382, 343(M)

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Front Rail as per drg

c) Legs as per drg

d) Side Rail as per Drg

e) Stiffner as per Drg

Bed Plywood Top / Hard Bed : FD-246/ 247

a) Long rail as per drg

b) Short rail as per drg

c) Foot board as per drg

d) Head board as per drg

e) Stiffeners as per drg

f) Removing old U/S/ old plytop with 12mm thick BWR (IS-303) marked plywood as per drg. MAKE :-NOVAPAN / ORCHID/KIT PLY/CENTURY/ARCHID

Chair Dinning : FD-69/228/279

a)Canning as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Leg Stiffner as per drg

e) Front/Rear/side Rail as per drg

f) Back Stiffner as per drg

Chair Easy : FD-229/17

a)Canning including seat and back as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Front/Rear Rail of seat frame as per drg

e) All types of rail of back frame as per drg

f) Side Rail of seat frame as per drg

g) Armrest as per drg

Chair Writing : FD- 280/250

a)Canning as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Leg Stiffner as per drg

e) Front/Rear/side Rail as per drg

f) Back Stiffner as per drg

g) Armrest as per drg

Sofa set Single/ two /Three/ four/ five seater with Arms: FD-281/258/373/MAP-II/02

(a) Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 400/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

(b) Replacement of U/SFront/Rear Leg as per Drg

(c) Replacement of U/S Batten of seat and back as per Drg

(d) Replacement of U/S Arms as per Drg

(e) Replacement of U/S front/rear/side rail of single seater of as per Drg

(f) Replacement of U/S front/rear rail of 3 seater of as per Drg

(g) Taking out old Unserviceable Cushion and Supply & Fix new cushion make Sleepwell/ Kurlon or Equivalent 40 density rest all as specified and shown on respective drgs.

(h) Replacement of U/S side rail of 3 seater of as per Drg

Chair Dining with cushion : FD/E6/MAP/10

(a) Replacement of Front leg as per drg

(b) Replacement of Rear leg as per drg

(c) Replacement of Stifner as per drg

(d) Replacement of front/rear/side Rail as per drg

(e) Replacement of seat including Tapestry cloth cushion and ply as per drg

(f) Replacement of Rear verticle strips as per drg

Table Dressing ladies with mirror : FD-251,378

a) Mirror as per drg, Make-Modiguard, Atul

(b) Back ply as per drg

c) Maganatic catcher as per drg

(d) Knob as per drg

(e) Drawer as per drg

Dressing Mirror Gents (MAP) : FD/E6/MAP/16

a) Mirror as per drg, Make-Modiguard, Atul

(b) Back ply as per drg

c) Maganatic catcher as per drg

(d) Hinges as per drg

(e) Glass shelves with mtg arrengement as per drg

(f) wall mounting arrangement as per drg

Table dressing Gents : FD-379

a) Mirror as per drg, Make-Modiguard, Atul

b) Drawer as per drg

(c) Back ply as per drg

d) Knobs as per drg

Table Dining 1200X900MM : FD-273, 30

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Triangular wooden bracket 100X100X20mm thick

c) Legs as per drg

d) Long Rail as per drg

e) Short Rail as per drg

M&L for french polishing of two coat to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and shade as applicable or as directed by Engineer-in-Charge.

(a) Bed Plywood Top : FD-246/247

(b). Chair Dinning : FD-69/228 FD/E6/MAP/10

(c). Chair Writing :FD-280 /250/20

(d) Chair easy : FD-229/17

(e). Locker bed side wooden : FD-54,222

(f). Peg table : FD-384/277/236

(g) Sofa Set 5/4seater : FD-281/258

(h) Table dining 6/8 pers : FD-239 /273

(j) Table 900x600mm with/without Drawer : FD-88/224 /231/291 /284 / 283/41(M)

(k) Table centre : FD-235/274/29

(l) Table wrtiting : FD-275

M&L for Melamine polishing of two coat to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and shade as applicable or as directed by Engineer-in-Charge

(a) Bed Plywood Top : FD-246/247

(b). Chair Dinning : FD-69/228 FD/E6/MAP/10

(c). Chair Writing : FD-280 /250/20

(d). Peg table : FD-384/277/236

(e) Sofa Set 3 seater : FD-281/258

(f) Sofa Set single seater : FD-281/258

(g) Table dining 6/8 pers : FD-239 /273

(h) Table centre : FD-235/274/29

(j) Table wrtiting : FD-275

(k) Teapoy : FD-278, 232, 382, 343(M)

(l) Chair easy : FD-229/17

(e) Sofa Set 3 seater : FD-281/258

SARGAM ENTERPRISES

Mahesh Traders

GAJANAN SALES CORPORATION

dimalsonsdecorator