Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹17.5 Cr
EMD Value
₹17.5 L
Closing Date
12 Sept 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of Stadium at Angul District, Odisha.
NBCC/ODISHA/ZO/ANGUL/22-23/69
NBCC/ODISHA/ZO/ANGUL/22-23/69
Open Tender-Domestic
Civil Works General
Anugul, Odisha
₹11,800
₹17.5 L
12 Sept 2022
22 Aug 2022
12 Sept 2022
12 Sept 2022
15 Sept 2022
BILL OF QUANTITY FOR PROPOSED STADIUM AT- ANGUL.
Sl.no. Description of Items Units Quantity Rate Amount
A. Gallery-2 & 4 (CIVIL WORK)
1 Earthwork Excavation.
Earthwork in excavation in all types of soil for site leveling, foundation,
pits, trenches and other civil works upto and including 1.5 metre depth
and stacking the soil upto a lead of 100 metre and including dewatering,
removing slush,shoring and strutting (as required), complete as per
specification and as directed by the Engineer-In-Charge.
2 Back Filling.
Filling in foundation trenches and plinth, with excavated earth including
laying the earth in layers not exceeding 23.5 cm thick ramming &
watering with all leads & lifts including cost of all labour,T&P completed
as directed by the Engineer-In-charge.
3 Sand Filling.
Supplying and filling sand in foundation and over areas including
watering, ramming, consolidating and dressing, labours, tools, taxes etc.
all complete as per the specification and direction of Engineer-In-
Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8
stone agregate 40mm nominal size) as levelling course in foundation and
plinth etc. including tempering, curring, shuttering etc. complete all depth
5 Fly Ash bricks Masinary (1:6) (in F & P).
First class Fly Ash Brick masonry using F.A. bricks of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm.
in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC)
and screened & washed sand for mortar after immersing the bricks for 6
(Six) hours in water before use in Foundation & Plinth including splays
cutting, circular moulding, corbelling, chamfering and similar such type of Cum 198.97 4903.76 975701.92
works, watering and curing etc. including cost, conveyance, loading,
unloading, royalties and taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the works etc. complete in all
respect as directed by the Engineer-in-Charge.
6 Fly Ash bricks Masonary (1:6) (Superstructure).
First class Fly Ash Brick masonry using F.A. bricks of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm.
in cement mortar of mix( 1:6) with ordinary Portland slag cement (PSC)
and screened & washed sand for mortar after immersing the bricks for 6
(Six) hours in water before use in Superstructure including splays
cutting, circular moulding, corbelling, chamfering and similar such type of Cum 131.38 4948.99 650173.56
works, watering and curing etc. including cost, conveyance, loading,
unloading, royalties and taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the works etc. complete in all
respect as directed by the Engineer-in-Charge.
Providing, lifting, hoisting and laying Reinforced cement concrete of M-
250 grade as per approved designs and drawings having a minimum
compressive strength (in work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test conducted in accordance with I.S.
516 using 12 mm. to 20 mm. size black hard crushed broken granite
stone chips and screened and washed sharp sand for mortar of
approved quality from approved quarry, washed and cleaned ( 20mm.
size chips not to exceeds 25 % ) to be mixed in concrete mixture with
Portland slag cement (PSC) including hoisting, lowering, laying and
compaction concrete by using vibrators, watering and curing for 28 days,
centering and shuttering then after dismantling and removing debris from
the work site and finishing the exposed surface smooth providing
grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all
labours, sundries, T & P required of the work etc. complete in all respect
as directed by the Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending etc. of M.S. rods or tor steel
tying the grills and placing in proper position.
c)Cloumn up to PL Cum 71.87 13198.42 948530.85
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
e) Column in Super - Structure :- Cum 110.57 13198.42 1459283.64
f) Staircase in Gallery :- Cum 1111.93 12624.67 14037680.63
8 Reinforcement.
Providing & fixing TMT Fe-500 reinforcement bars for RCC work of
required diameter of approved quality with straightening, cutting,
bending, binding welding and joining (if necessary) and tying the grills
and placing in position as required for R.C.C. work and providing fan
hooks, hoisting, lowering and laying including cost, conveyance and
taxes of M.S. Rods or tor steel and binding wires of 18 to 20 gauge and Qtl 3047.06 10414.34 31733127.98
labour required for the work for bending, binding and tying the grills in all
heights as per the specification & direction of Engineer-in-charge.
(Linear measurements will be taken & quantity will be calculated on
standard weight. Weight of binding wire will not be considered for
Providing and fixing 20mm thick Granite stone in steps (sample of
Granite stone should be approved by EIC) for any locations where ever
required in horizontal/vertical surfaces of required size of approved
shade, colour and texture, with moulding edge etc. laid over 25mm thick
9 bed of cement mortar 1:1 (1 cement: 1 coarse sand) with joints treated Sqm 131.57 2879.64 378859.97
with white cement mixed with matching pigment, epoxy touch ups
including rubbing, curing, moulding and polishing to give high gloss finish
etc. complete as per direction of Engineer-in-charge. In all floors and all
Providing and fixing 16mm thick Kota stone flooring/skirting (sample of
Kota stone should be approved by EIC) for stair case trade, riser and
similar locations where ever required in horizontal/vertical surfaces of
required size of approved shade, colour and texture, with moulding edge
etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse
sand) with joints treated with white cement mixed with matching pigment,
epoxy touch ups including rubbing, curing, moulding and polishing to
give high gloss finish etc. complete as per direction of Engineer-in-
charge. In all floors and all heights.
11 12 mm Plastering. 0.00 0.00
Providing 12mm. thick cement plaster in all floors at all height with
cement mortar of mix (1:6) with OPC 53 grade cement finished smooth
to outside surface of brick masonry walls after racking out joints
including watering and curing rounding of corners etc. complete with
cost, coveyance, loading and unloading, royalties and taxes of all
materials and cost of all labour, T&P, sundries and scaffolding required
for the work etc. with providing grooves as directed by the Engineer in
12 CEMENT PRIMER. 0.00 0.00
Providing & Applying priming one coat with water based Cement primer
of approved brand and manufacture on plastered surface including cost,
conveyance, loading and unloading and taxes of all materials, cost of all
labour, sundries, T & P, scaffolding etc. required for the work and
complete in all respect as per specification and direction of Engineer-in-
13 Weather Coat.
Painting to external surface of building with two coats of weather coat of
approved shade and quality of approved design, after cleaning by
watering & removing the dirts etc. to the surface to be painted including
watering, curing, cost, conveyance and taxes of all materials, cost of all
labour, brushes, T&P etc. and necessary scaffolding work complete as
directed by the Engineer-in-charge.
14 Plastic Emulsion Paint.
Providing & painting Two coats of Plastic Emusion paint with 1st quality
oil bound washable distemper of approved brand and manufacturer to
give an even shade as per the instruction of Engineer - In- Charge at all Sqm 1153.75 92.98 107280.29
elevations including all material & labour complete.
15 Expansion joint Treatment
a) Treatment of Surface/groove will be done manually. Size of groove to
be minimizes to 50mm/ 25mm by using Micro concrete.
b) Trerma cool to be applied.
C) Providing & applying bonding materials in both side of groove.
D) Providing & applying Poly- sealant.
e) 7 days gap is required for curing.
f) Bonding materials to be applied and tape on the groove.
B. Gallery-3 CIVIL WORK. (Ground Floor .)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Earthwork in excavation in all types of soil for site leveling, foundation,
pits, trenches and other civil works upto and including 2.4metre depth
and stacking the soil upto a lead of 100 metre and including dewatering,
removing slush, shoring and strutting (as required), complete as per
specification and as directed by the Engineer-In-Charge.
i All type of Soil Cum 1918.86 253.94 487267.63
Filling in foundation trenches and plinth, with excavated earth including
laying the earth in layers not exceeding 23.5 cm thick ramming &
watering with all leads & lifts including cost of all labour,T&P completed
as directed by the Engineer-In-charge.
Supplying and filling in plinth with locally available river sand under floors
including watering, ramming, consolidating and dressing complete to
3 achieve relative density of minimum 80% (Measured consolidated Cum 2558.37 560.52 1434026.76
volume only) complete as per drawing, design and direction of
Architect/Engineer-in-charge.
Pre-Construction Anti-termite treatment to your site with lmidachloprid
4 30.5 SC or chloropyrifos 20% EC as per IS 6313 Part-III (2013) revision Sqm 1986.77 123.31 244988.36
including all materials and Labour cost etc.
Providing and lying plain cement concrete of proportion (1:4:8) in
foundation and floors using Portland slag cement (PSC) with 40 mm.
Size black hard crusher broken granite stone metal and screened and
washed sharp sand for mortar of approved quality from approved quarry,
washed and cleaned including hoisting, lowering, laying concrete,
ramming, watering and curing etc. complete to required levels laid in
layers not exceeding 15 cm thick in each layer including cost,
conveyance, loading, unloading, royalties and taxes all materials and
cost all labours, sundries, T & P required for the work including shoring,
shuttering and dewatering if required including hire & running charges of
water pump complete as per the instruction of the Engineer-in-Charge.
Providing and lying plain cement concrete of proportion (1:3:6) in
foundation and floors using Portland slag cement (PSC) with 20 mm.
Size black hard crusher broken granite stone metal and screened and
washed sharp sand for mortar of approved quality from approved quarry,
washed and cleaned including hoisting, lowering, laying concrete,
ramming, watering and curing etc. complete to required levels laid in
layers not exceeding 15 cm thick in each layer including cost,
conveyance, loading, unloading, royalties and taxes all materials and
cost all labours, sundries, T & P required for the work including shoring,
shuttering and dewatering if required including hire & running charges of
water pump complete as per the instruction of the Engineer-in-Charge.
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x
8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after immersing the bricks for 6 (Six)
hours in water before use in Foundation & Plinth including splays
7 cutting, circular moulding, corbelling, chamfering and similar such type of Cum 237.53 4903.76 1164791.06
works, watering and curing etc. including cost, conveyance, loading,
unloading, royalties and taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the works etc. complete in all
respect as directed by the Engineer-In-Charge.
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x
8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after immersing the bricks for 6 (Six)
hours in water before use in Super stracture including splays cutting,
8 circular moulding, corbelling, chamfering and similar such type of works, Cum 324.34 4948.99 1605160.63
watering and curing etc. including cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc. complete in all respect as
directed by the Engineer-In-Charge.
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x
8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after immersing the bricks for 6 (Six)
hours in water before use in Super stracture including splays cutting,
9 circular moulding, corbelling, chamfering and similar such type of works, Cum 46.17 5185.28 239404.42
watering and curing etc. including cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc. complete in all respect as
directed by the Engineer-In-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Providing, lifting, hoisting and laying Reinforced cement concrete of M-
25 grade as per approved designs and drawings having a minimum
compressive strength (in work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test conducted in accordance with I.S.
516 using 12 mm. to 20 mm. size black hard crushed broken granite
stone chips and screened and washed sharp sand for mortar of
approved quality from approved quarry, washed and cleaned ( 20mm.
size chips not to exceeds 25 % ) to be mixed in concrete mixture with
Portland slag cement (PSC) including hoisting, lowering, laying and
compaction concrete by using vibrators, watering and curing for 28 days,
10 centering and shuttering then after dismantling and removing debris from
the work site and finishing the exposed surface smooth providing
grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all
labours, sundries, T & P required of the work etc. complete in all respect
as directed by the Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending etc. of M.S. rods or tor steel
tying the grills and placing in proper position.
a) Column Pedestal top to NGL lvl. Cum 37.10 13198.42 489621.90
Internal Drain Work, Raft, wall CUM 373.28 6229.71 2325393.49
Supplying, straightening, cutting, bending, placing in position and binding
reinforcement steel work in RCC/reinforced brick works as per drawing
and specification including preparation of respective bar bending
11 schedule and binding ( Binding wire to be used as per the IS code) etc. Qtl 1403.90 10414.34 14620664.92
all complete as per direction of Engineer-in-charge Cold Twisted bars,
Thermo-Mechanically-treated bars.
12mm cement plaster on external RCC/brick surfaces in cement plaster
1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing
etc. all complete at all floors and all heights. (External Surface)
16mm cement plaster on internal smooth side of RCC/brick surfaces
with cement mortar of mix 1:6 (1 cement : 6 fine sand) including
necessary scaffolding, curing etc. all complete at all floors and all
heights. (Internal Surface)
6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other
locations with cement mortar of mix 1:4 (1 cement : 4 fine sand)
including necessary scaffolding, curing etc. all complete at all floors and
all heights. (Ceilling Surface)
Providing and laying Vitrified floor tiles 600x600 mm (thickness to be
specified by the manufacturer) 1st quality conforming to IS: 15622 of
NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make,
colours & shades, except white, ivory, grey, fume red brown, laid on 20
mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing
the joints with white cement and matching pigments, etc. complete as
per direction of EIC at all floors and all heights.
Providing and laying Vitrified skirting tiles 600x600 mm (thickness to be
specified by the manufacturer) 1st quality conforming to IS: 15622 of
NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make,
colours & shades, except white, ivory, grey, fume red brown, laid on 20
mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing
the joints with white cement and matching pigments, etc. complete as
per direction of EIC at all floors and all heights.
Providing and fixing 20mm thick Granite stone flooring (sample of
Granite stone should be approved by EIC) for stair case trade, riser and
similar locations where ever required in horizontal/vertical surfaces of
required size of approved shade, colour and texture, with moulding edge
etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse
17 sand) with joints treated with white cement mixed with matching pigment, Sqm 386.00 2879.64 1111527.25
epoxy touch ups including rubbing, curing, moulding and polishing to
give high gloss finish and groove in staircase where required etc.
complete as per direction of Engineer-in-charge. In all floors and all
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Providing and fixing 16mm thick Kota stone flooring/skirting (sample of
Kota stone should be approved by EIC) for stair case trade, riser and
similar locations where ever required in horizontal/vertical surfaces of
required size of approved shade, colour and texture, with moulding edge
etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse
sand) with joints treated with white cement mixed with matching pigment,
epoxy touch ups including rubbing, curing, moulding and polishing to
give high gloss finish etc. complete as per direction of Engineer-in-
charge. In all floors and all heights.
Providing and fixing seasoned sal wood work in frames at any locations
including doors, windows, cupboard, clerestory and other frames fixing
in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and length as per drawing /
specification, at all floors and all heights.
Providing and fixing ISI marked Flush door shutter conforming to IS:
2202 (part-I) decorative type, core of block board construction with frame
of 1st class hard wood and well matched teak 3 ply veneering with
vertical grains or cross bands and face veneers on both faces of shutter,
including all materials and labours and direction of Engineer-In-Charge in
all floors & all heights.
Providing, fixing, fitting of fully glazed door made out of Black powder
coated aluminum frame using door section of 19501 of Jindal make
with top, bottom and vertical member, Glazing clip no19352 and jointing
angles and 10mm thick. toughened clear glass with itching as per
21 drawing/design with all necessary hardware including long S.S handle to Sqm 20.16 7377.36 148727.58
both side, including all cost of labour, T&P, hire charges of drilling
machine, labour charges etc. complete as per direction of Engineer-In-
Charge at all floors and all heights.
Providing and Fixing pristine white uPVC doors & windows make:
Fenesta. Company must have own production facilities (extrusion &
fabrication) & control the entire cycle from Extrusion to Installation to
Post Sales Service. Providing and fixing of factory-made uPVC Sliding
window (White Colour) complete, comprising uPVC multi-chambered
frame having in-built uPVC roller track on top and uPVC sash with wall
thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.6 mm
(+-0.2 mm), profile shall be manufactured from Tropicalized Blend with
TiO2 and required additives. Profile must be colorfast and conform to
standard EN12608. The profile sections should have multi hollow (min 2
to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc
coated, fitted in continuous length, in closed chamber. The thickness of
GI should be selected to meet the wind load requirement as per IS 875-
22 Part III on sash/mullion. Supplier should be submitting wind load
calculation & validation complying with IS-875-III before material supply.
Minimum steel reinforcement thickness of 1.2mm to 2.5mm. UPVC
Windows & Doors must be fabricated with fusion welded corners & must
conform to the strength requirements based on wind load as per IS 875-
Part III. All hardware fitted should be Non-SS, except handles to be of
zinc/Al. alloy casted with powder coated. Glass should be of 6mm single
clear Glass with weather seal (EPDM/TPE). There would be Warranty of
10 years on Profile & one year on hardware from the date of installation.
UPVC windows & doors must be installed by profile manufacturer only.
Only manufacturer Warranty is acceptable.
After placing 6 mm Green Reflective Toughened glass in the sash,
uPVC glazing bead, interlock, EPDM gasket, brush shall be provided
including touch lock( above 1500 mm Multi Lock ) and rollers & proper
drainage system shall be provided. Window frame will be fixed to the
wall with 100mm long and 8mm dia. Fasteners and after fixing frame the
gap between frame & wall should be filled with silicon sealant (not more
than 5 mm x 5 mm), complete in all respect as per direction of Engineer-
Providing and fixing M.S grill of required patterns for windows/verandahs
etc. with M.S flats, square or round bars etc. including applying a coat of
approved steel primer and two or more coats of synthetic enamel paint
of approved make & shade, all complete as per drawing & specification.
(All steel sections contractor's own supply).
Providing & Applying priming one coat with Cement primer of approved
brand and manufacture on plaster surface as per the instruction of
Engineer-In-Charge at all elevations including all material & labour
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Providing and applying to outside walls with two or more coats of Anti-
Fungal Weather coat water proofing paint including scaffolding and
cleaning the surface before application of approved colour and
manufacture as per specification, instruction of Engineer-In-charge at all
elevations including all material labour complete.
Providing and applying white cement based putty of average thickness 1
mm of approved brand and manufacturer, over the plastered wall
26 surfaces to prepare the surface even and smooth as per the instruction Sqm 4837.32 79.87 386377.07
of Engineer-In-Charge at all elevations including all material & labour
Providing & painting two coats of Plastic emulsion paint with 1st quality
of approved brand and manufacturer to give an even shade as per the
instruction of Engineer-In-Charge at all elevations including all material &
labour complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
28 TEXTURE PAINT.
Providing and applying two coats unitile's Royal/Rivera make in
approved shade on a smooth cement sand plaster. The composition of
the texture paint should consist of Acrylic Copolymer Resigns combined
with Quartz, Silica,mineral aggregates, synthetic inorganic pigments,
bactericide, fungicides and various other additives,giving the product
water repellant properties. The first coat to be applied by brush or wool
roller as a base coat, diluted with sufficient water and the final coat
applied undiluted with trowel and then finished with acrylic trowel to
obtain the specified grooves.The thickness of both coats dhould be 1.0
to 1.5 mm. The water repellency of the product is 86gm/m2 as per test
method IS: 5410-1969.
Providing & Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade as per the instruction of Engineer -
In- Charge at all floors and all heights including all material & labour
Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling
using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm
X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of
30 size 32mm X 32mm X 2mm in 3 rows in stair case as per approved KG 1677.71 395.18 663000.79
design and specification, buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required for the complete in all
31 Expansion joint Treatment
a) Treatment of Surface/groove will be done manually. Size of groove to
be minimizes to 50mm/ 25mm by using Micro concrete.
b) Trerma cool to be applied.
C) Providing & applying bonding materials in both side of groove.
D) Providing & applying Poly- sealant.
e) 7 days gap is required for curing.
f) Bonding materials to be applied and tape on the groove.
32 G.R.C. JALI
Providing and fixing glass reinforced concrete (G.R.C) Screens in
approved size, pattern, design, shadeand thickness of 50mm on frame
and design element in 30mm thick have weight approximately between
3.5 - 4 kg per sq.ft .and color of M/S Unistone make or equivalent. The
above weight and having at least 50% void space. The screens should
be made from 53 grade white portlsnd cement manufactured by N.E.G
JAPAN or equivalent, super plasticizers manufactured by BASF or
equivalent, polymers manufactured by BASF or equivalent and U.V
resistant synthetic inorganic pigments should be used for pigmentation
manufactured by BAYFERROX (Germany) or equivalent. The matrial
casting should take place in frp molds. The fixing of screens should be
Dry fixing i.e. to be done with M.S Galvanized clamps, fixtures and
fasteners of Hilti/fischer.
33 FAÇADE DESIGN
Designing, fabricating, supplying, assembling and fixing in position as
per site conditions bracket fitted Glass of 25.52 mm (12mm thk. Clear FT
glass + 1.52 PVB + 12mm thk. clear) as per the approved shop
drawings. Brackets of GI with HDG 60-80 micron to support and fixing
the glass at top fittings and at bottom with 38X38X2mm Aluminium
extruded `U' channel at the floor level, by the help of setting blocks to
align and filling the grooves by weather silicon of Dow cornning 789
clear, at the approved shop drawings adhering to manufacturers
specifications. This also includes providing necessary profiled cut-outs
and enough numbers of machine made holes to facilitate fixing of
fittings, specifications. All the edges of the glass panels including profiled
cutting shall be neatly machine polished as per the manufacturers
specifications. Rate will be scaffolding included as per drawing and
direction of Engineer-In-Charge at all floors and all heights.. The
contractor will submite the detail design, drawing and stability certificate
to the Engineer-in-charge.
Providing of mural artistic wall painting with 1st quality of approved
brand and manufacturer to give an even shade as per the instruction of
Engineer-In-Charge at all elevations including all material & labour
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
35 HPL Cladding.
Supplying and fixing of Fundermax brand or equivalent Clades of
standard dimension of 1300mm x 3050mm of thickness 6mm.(WOOD
FINISH) for fixing used Al. sub structure is made up of Aluminum box
sections of 38x38x2mm the. and 38x75x2mm the. The section size
75x38 x2mm will be using on the vertical joint of the two panels. As per
the standard procedures in riveting system. Spacing of two verticals
should always be maintained at 600mm. MS Brackets are of two types,
Wind load brackets and Dead load brackets of size 85x50x5mm the. and
to be placed in 1500 mm intervals in vertical. Wind load brackets will
have vertical slot and Dead load brackets will have horizontal slots.
Thermal separators to be placed between MS brackets and concrete
structure. Bimetallic separators to be placed between Al. sub structure
and MS brackets. Brackets fixing with nylon fasteners or self tapping
bolts. Aluminum grid frame fixing in between brackets by ss nut and Sqm 123.95 9676.00 1199320.85
bolts. After framing done the panels fixing started with maintaining 6mm
horizontal and vertical gaps between one panels to another. For fixing of
panels done by riveting. Rivet distance maintain horizontally 600mm and
vertically 600mm Maximum. First drill hole of the panel for rivet should
be maintain 40mm from top and 20mm from side. For proper ventilation
providing 20mm gap on top and bottom of the facade for maintaining air
circulation.Including all materials and labour complete as per drawing
and direction of Engineer-in-charge at all floors and all heights. Note.
The contractor will provide 10 year Guaranty certificate for the
above clading works.
36 FALSE CEILLING
a. GYP BOARD CEILLING.
Providing and fixing False ceiling as per Saint Gobain Specifications
made of standard G.I. Sections and 12mm thick gyp board sheets
inclusive of all hangers, edge members and other clips complete, with
sheets fixed with proper Philip fastner by power drills and joints duly
finished ensuring level in line, complete with putty, primer and painting of
approved make and colour. Cost includes cutouts for electrical fittings,
materials, labour, T&P etc complete as per direction of the Engineer-in-
charge. (Basic Rate of Gypsum Board 12mm thk. Rs.303/ sheet).
b. GRID CEILING WITH ANUTONE SUBTEX NUBBY STEP EDGE
Supply and Installation of Anutone 15 mm glassfiber steppe edge Glass
fibre core ceiling tile of size 595 x 595 x 15mm having all edges
encapsulated with chemical treated paint & having density 100-120 Kgs/
m3, weight 1.5 - 3.0 kg/m2 which is suspended by using 0.3mm thick
and 15 mm wide pre coated metal T15/24 grid system. The technical
parameters are as follows :Core - Glassfibre, Fire – Class 1 & P ,
Acoustics – NRC 0.95,Climate (OC RH) – 40, 95,Termite resistance
,Light reflectance – 85 %,Green (RC %) – 35, Hygiene (VoC, Clean
room) – Low, Class 3 Strength, Load capacity (Kg) - Antisag. The
T15/24 Grid system of 600 x 600 mm module shall include wall
angle(WA15) with unequal flanges of size 14 x 20 x3000mm wide, length
3000mm, 0.43 mm thick fixed along the perimeter of wall with the help of
nylon sleeves and suitable fasteners at 300mm centers. Then suspend
the Main T15(MT15W36) having flange width 15mm /24 mm , height
32/38 mm and length 3600mm thickness 0.30 mm from the soffit with Sqm 499.04 2709.28 1352039.09
help of soffit cleat and wire at 1200mm c/c. Cross T15 (CT15W12) with
flange width 15 mm, height 32 mm and length 1200 mm is then
interlocked into the pre-cut slots in the Main T15 at 600mm centers in
the direction perpendicular to the Main T15. Finally Cross T15
(CT15W06) having flange width 15 mm, height 32mm and length 600mm
are then interlocked into the pre cut slots in the 1200 mm Cross T15 at
1200mm centers and in direction parallel to the Main T15. Anuton
Subtex Nubby steppe edge of size 595 x 595 x 15mm thick shall be
placed into the grid size of 600 x 600 mm. Ensure arrow marks behind
subtex panels are orianted in one direction to achieve uniform shade.
Test certificate will be submmited after procurement of materials.
B. Gallery-3 CIVIL WORK. (UPPER FLOOR) 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x
8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after immersing the bricks for 6 (Six)
hours in water before use in Super stracture including splays cutting,
1 circular moulding, corbelling, chamfering and similar such type of works, Cum 66.56 5271.41 350865.32
watering and curing etc. including cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc. complete in all respect as
directed by the Engineer-In-Charge.
Providing, lifting, hoisting and laying Reinforced cement concrete of M-
25 grade as per approved designs and drawings having a minimum
compressive strength (in work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test conducted in accordance with I.S.
516 using 12 mm. to 20 mm. size black hard crushed broken granite
stone chips and screened and washed sharp sand for mortar of
approved quality from approved quarry, washed and cleaned ( 20mm.
size chips not to exceeds 25 % ) to be mixed in concrete mixture with
Portland slag cement (PSC) including hoisting, lowering, laying and
compaction concrete by using vibrators, watering and curing for 28 days,
2 centering and shuttering then after dismantling and removing debris from
the work site and finishing the exposed surface smooth providing
grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all
labours, sundries, T & P required of the work etc. complete in all respect
as directed by the Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending etc. of M.S. rods or tor steel
tying the grills and placing in proper position.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying, straightening, cutting, bending, placing in position and binding
reinforcement steel work in RCC/reinforced brick works as per drawing
and specification including preparation of respective bar bending
3 schedule and binding ( Binding wire to be used as per the IS code) etc. Qtl 957.75 10443.10 10001883.53
all complete as per direction of Engineer-in-charge Cold Twisted bars,
Thermo-Mechanically-treated bars.
12mm cement plaster on external RCC/brick surfaces in cement plaster
1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing
etc. all complete at all floors and all heights. (External Surface)
Providing and fixing 16mm thick Kota stone flooring/skirting (sample of
Kota stone should be approved by EIC) for stair case trade, riser and
similar locations where ever required in horizontal/vertical surfaces of
required size of approved shade, colour and texture, with moulding edge
etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse
sand) with joints treated with white cement mixed with matching pigment,
epoxy touch ups including rubbing, curing, moulding and polishing to
give high gloss finish etc. complete as per direction of Engineer-in-
charge. In all floors and all heights.
Providing & Applying priming one coat with Cement primer of approved
brand and manufacture on plaster surface as per the instruction of
Engineer-In-Charge at all elevations including all material & labour
Providing and applying to outside walls with two or more coats of Anti-
Fungal Weather coat water proofing paint including scaffolding and
cleaning the surface before application of approved colour and
manufacture as per specification, instruction of Engineer-In-charge at all
elevations including all material labour complete.
8 TEXTURE PAINT.
Providing and applying two coats unitile's Royal/Rivera make in
approved shade on a smooth cement sand plaster. The composition of
the texture paint should consist of Acrylic Copolymer Resigns combined
with Quartz, Silica,mineral aggregates, synthetic inorganic pigments,
bactericide, fungicides and various other additives,giving the product
water repellant properties. The first coat to be applied by brush or wool
roller as a base coat, diluted with sufficient water and the final coat
applied undiluted with trowel and then finished with acrylic trowel to
obtain the specified grooves.The thickness of both coats dhould be 1.0
to 1.5 mm. The water repellency of the product is 86gm/m2 as per test
method IS: 5410-1969.
Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling
using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm
X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of
9 size 32mm X 32mm X 2mm in 3 rows in stair case as per approved KG 1311.89 395.18 518435.71
design and specification, buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required for the complete in all
10 HPL Cladding.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying and fixing of Fundermax brand or equivalent Clades of
standard dimension of 1300mm x 3050mm of thickness 6mm.(WOOD
FINISH) for fixing used Al. sub structure is made up of Aluminum box
sections of 38x38x2mm the. and 38x75x2mm the. The section size
75x38 x2mm will be using on the vertical joint of the two panels. As per
the standard procedures in riveting system. Spacing of two verticals
should always be maintained at 600mm. MS Brackets are of two types,
Wind load brackets and Dead load brackets of size 85x50x5mm the. and
to be placed in 1500 mm intervals in vertical. Wind load brackets will
have vertical slot and Dead load brackets will have horizontal slots.
Thermal separators to be placed between MS brackets and concrete
structure. Bimetallic separators to be placed between Al. sub structure
and MS brackets. Brackets fixing with nylon fasteners or self tapping
bolts. Aluminum grid frame fixing in between brackets by ss nut and Sqm 117.03 9676.00 1132353.25
bolts. After framing done the panels fixing started with maintaining 6mm
horizontal and vertical gaps between one panels to another. For fixing of
panels done by riveting. Rivet distance maintain horizontally 600mm and
vertically 600mm Maximum. First drill hole of the panel for rivet should
be maintain 40mm from top and 20mm from side. For proper ventilation
providing 20mm gap on top and bottom of the facade for maintaining air
circulation.Including all materials and labour complete as per drawing
and direction of Engineer-in-charge at all floors and all heights. Note.
The contractor will provide 10 year Guaranty certificate for the
above clading works.
C. TOILET BLOCK
Earthwork in excavation in all types of soil for site leveling, foundation,
pits, trenches and other civil works upto and including 2.4metre depth
and stacking the soil upto a lead of 100 metre and including dewatering,
removing slush, shoring and strutting (as required), complete as per
specification and as directed by the Engineer-In-Charge.
a. All type of Soil Cum 240.26 253.94 61010.66
Filling in foundation trenches and plinth, with excavated earth including
laying the earth in layers not exceeding 23.5 cm thick ramming &
watering with all leads & lifts including cost of all labour,T&P completed
as directed by the Engineer-In-charge.
Supplying and filling in plinth with locally available river sand under floors
including watering, ramming, consolidating and dressing complete to
3 achieve relative density of minimum 80% (Measured consolidated Cum 260.69 560.52 146122.90
volume only) complete as per drawing, design and direction of
Architect/Engineer-in-charge.
Providing and lying plain cement concrete of proportion (1:3:6) in
foundation and floors using Portland slag cement (PSC) with 40 mm.
Size black hard crusher broken granite stone metal and screened and
washed sharp sand for mortar of approved quality from approved quarry,
washed and cleaned including hoisting, lowering, laying concrete,
ramming, watering and curing etc. complete to required levels laid in
layers not exceeding 15 cm thick in each layer including cost,
conveyance, loading, unloading, royalties and taxes all materials and
cost all labours, sundries, T & P required for the work including shoring,
shuttering and dewatering if required including hire & running charges of
water pump complete as per the instruction of the Engineer-in-Charge.
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x
8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after immersing the bricks for 6 (Six)
hours in water before use in Foundation & Plinth including splays
5 cutting, circular moulding, corbelling, chamfering and similar such type of Cum 29.93 4903.76 146764.77
works, watering and curing etc. including cost, conveyance, loading,
unloading, royalties and taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the works etc. complete in all
respect as directed by the Engineer-In-Charge.
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x
8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after immersing the bricks for 6 (Six)
hours in water before use in Super stracture including splays cutting,
6 circular moulding, corbelling, chamfering and similar such type of works, Cum 65.22 4948.99 322773.18
watering and curing etc. including cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc. complete in all respect as
directed by the Engineer-In-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x
8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after immersing the bricks for 6 (Six)
hours in water before use in Super stracture including splays cutting,
7 circular moulding, corbelling, chamfering and similar such type of works, Cum 14.26 5185.28 73931.74
watering and curing etc. including cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc. complete in all respect as
directed by the Engineer-In-Charge.
Providing, lifting, hoisting and laying Reinforced cement concrete of M-
25 grade as per approved designs and drawings having a minimum
compressive strength (in work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test conducted in accordance with I.S.
516 using 12 mm. to 20 mm. size black hard crushed broken granite
stone chips and screened and washed sharp sand for mortar of
approved quality from approved quarry, washed and cleaned ( 20mm.
size chips not to exceeds 25 % ) to be mixed in concrete mixture with
Portland slag cement (PSC) including hoisting, lowering, laying and
compaction concrete by using vibrators, watering and curing for 28 days,
8 centering and shuttering then after dismantling and removing debris from
the work site and finishing the exposed surface smooth providing
grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all
labours, sundries, T & P required of the work etc. complete in all respect
as directed by the Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending etc. of M.S. rods or tor steel
tying the grills and placing in proper position.
c) Column up to NGL lvl. Cum 3.60 13198.42 47514.33
d) Column upto slab level Cum 10.80 13198.42 142542.98
f) Plinth Beam Cum 12.08 6670.64 80581.38
Supplying, straightening, cutting, bending, placing in position and binding
reinforcement steel work in RCC/reinforced brick works as per drawing
and specification including preparation of respective bar bending
9 schedule and binding ( Binding wire to be used as per the IS code) etc. Qtl 147.35 10414.34 1534553.44
all complete as per direction of Engineer-in-charge Cold Twisted bars,
Thermo-Mechanically-treated bars.
12mm cement plaster on external RCC/brick surfaces in cement plaster
1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing
etc. all complete at all floors and all heights. (External Surface)
16mm cement plaster on internal smooth side of RCC/brick surfaces
with cement mortar of mix 1:6 (1 cement : 6 fine sand) including
necessary scaffolding, curing etc. all complete at all floors and all
heights. (Internal Surface)
6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other
locations with cement mortar of mix 1:4 (1 cement : 4 fine sand)
including necessary scaffolding, curing etc. all complete at all floors and
all heights. (Ceilling Surface)
Providing and fixing 20mm thick Granite stone flooring (sample of
Granite stone should be approved by EIC) for stair case trade, riser and
similar locations where ever required in horizontal/vertical surfaces of
required size of approved shade, colour and texture, with moulding edge
etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse
13 sand) with joints treated with white cement mixed with matching pigment, Sqm 19.50 2879.64 56148.69
epoxy touch ups including rubbing, curing, moulding and polishing to
give high gloss finish and groove in staircase where required etc.
complete as per direction of Engineer-in-charge. In all floors and all
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Providing and laying Matte Finish Vitrified floor tiles 300x300 mm
(thickness to be specified by the manufacturer) 1st quality conforming to
IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent
approved make, colours & shades, except white, ivory, grey, fume red
brown, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand)
including pointing the joints with white cement and matching pigments,
etc. complete as per direction of Engineer-In-Charge at all floors and all
Providing and fixing 1st quality Ceramic glazed wall tiles conforming to
IS : 15622 (thickness to be specified by the manufacturer) minimum
thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent
approved make in all colours, shades except burgundy, bottle green,
black of size 300x200 in skirting and dados over 12 mm thick bed of
cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3 kg per sqm including pointing in white cement
mixed with pigment of matching shade complete as per direction of
Engineer-In-Charge. In all floors and all heights.
Providing and fixing seasoned sal wood work in frames at any locations
including doors, windows, cupboard, clerestory and other frames fixing
in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and length as per drawing /
specification, at all floors and all heights.
Providing and fixing ISI marked Flush door shutter conforming to IS:
2202 (part-I) decorative type, core of block board construction with frame
of 1st class hard wood and well matched teak 3 ply veneering with
vertical grains or cross bands and face veneers on both faces of shutter,
including all materials and labours and direction of Engineer-In-Charge in
all floors & all heights.
Factory made single leaf rigid FRP(alternately called GRP) sandwich
composite door shutter of 32mm thick laminated with two GRP skins with
wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and
one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated
with orthopthalic palyester resin. The thickness of the skins shall not be
less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of
29mm thickness and a density of 20kg/cu.mtr shall be used as core
material. Wooden reinforcements made of seasoned sal wood block of
cross section not less than 28mmx32mm and also necessary sal wood
reinforcements for fitting the metal fittings such as tower bolts, aldrops,
handles etc shall be provided. A structural adhesive compatible with
18 (EPS) foam shall be used for bending the core material, the sal wood Sqm 47.25 6419.55 303323.93
reiforcements and the skins. The material and process for manufacturing
the door shutters shall conform to RV-TIFAC composites Design
Centre's standards and specifications and the door shutters tested in
conformation to IS: 4020-1998. The finish of door shutter will be plain
colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any
other colour using high quality pigments. Three heavy whight mild steel
butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of
shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Providing and Fixing pristine white uPVC doors & windows make:
Fenesta. Company must have own production facilities (extrusion &
fabrication) & control the entire cycle from Extrusion to Installation to
Post Sales Service. Providing and fixing of factory-made uPVC Sliding
window (White Colour) complete, comprising uPVC multi-chambered
frame having in-built uPVC roller track on top and uPVC sash with wall
thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.6 mm
(+-0.2 mm), profile shall be manufactured from Tropicalized Blend with
TiO2 and required additives. Profile must be colorfast and conform to
standard EN12608. The profile sections should have multi hollow (min 2
to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc
coated, fitted in continuous length, in closed chamber. The thickness of
GI should be selected to meet the wind load requirement as per IS 875-
19 Part III on sash/mullion. Supplier should be submitting wind load
calculation & validation complying with IS-875-III before material supply.
Minimum steel reinforcement thickness of 1.2mm to 2.5mm. UPVC
Windows & Doors must be fabricated with fusion welded corners & must
conform to the strength requirements based on wind load as per IS 875-
Part III. All hardware fitted should be Non-SS, except handles to be of
zinc/Al. alloy casted with powder coated. Glass should be of 6mm single
clear Glass with weather seal (EPDM/TPE). There would be Warranty of
10 years on Profile & one year on hardware from the date of installation.
UPVC windows & doors must be installed by profile manufacturer only.
Only manufacturer Warranty is acceptable.
After placing 6 mm Green Reflective Toughened glass in the sash,
uPVC glazing bead, interlock, EPDM gasket, brush shall be provided
including touch lock( above 1500 mm Multi Lock ) and rollers & proper
drainage system shall be provided. Window frame will be fixed to the
wall with 100mm long and 8mm dia. Fasteners and after fixing frame the
gap between frame & wall should be filled with silicon sealant (not more
than 5 mm x 5 mm), complete in all respect as per direction of Engineer-
Providing & Applying priming one coat with Cement primer of approved
brand and manufacture on plaster surface as per the instruction of
Engineer-In-Charge at all elevations including all material & labour
Providing and applying to outside walls with two or more coats of Anti-
Fungal Weather coat water proofing paint including scaffolding and
cleaning the surface before application of approved colour and
manufacture as per specification, instruction of Engineer-In-charge at all
elevations including all material labour complete.
Providing and applying white cement based putty of average thickness 1
mm of approved brand and manufacturer, over the plastered wall
22 surfaces to prepare the surface even and smooth as per the instruction Sqm 1120.69 79.87 89514.14
of Engineer-In-Charge at all elevations including all material & labour
Providing & painting two coats of Plastic emulsion paint with 1st quality
of approved brand and manufacturer to give an even shade as per the
instruction of Engineer-In-Charge at all elevations including all material &
labour complete.
Providing and fixing M.S grill of required patterns for windows/verandahs
etc. with M.S flats, square or round bars etc. including applying a coat of
approved steel primer and two or more coats of synthetic enamel paint
of approved make & shade, all complete as per drawing & specification.
(All steel sections contractor's own supply).
Providing & Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade as per the instruction of Engineer -
In- Charge at all floors and all heights including all material & labour
Providing and laying grading conc. 25 mm (avg. thickness) cement
concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone
aggregate of 10 mm nominal size) mixed with approved water proof
compound as per manufacturer's specification on top of slab including
cement slurry, all complete, including the cost of water proofing
admixture, which should be approved by the Engineer-In-Charge prior to
material procurement by the contractor.
27 Waterproofing Treatment :- Terrcae Roof Top Surface.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Waterproofing Treatment of Terrace:- Ponding test first to be done,
application of Nerolac-Perma Coat & Seal in 2 coats over the roof slab &
continue over the parapet wall reinforced with Nerolac-Perma Non-
Woven Polyester Fabric coving with 1:4 C.M admixed with Nerolac-
Perma Plast-o-Proof STD @ 100 gram per 50kg cement over the joint
terrace to parapet over bond coat Nerolac-Perma latex SBR (1:4:6)
followed by a the protection screed (1:1.5:3) in panel of size 2 mtr x 2
mtr to drain the water towards the rain water pipe & finally filled the
grooves 8mm x 10mm with Nerolac-Perma Polyseal (Poly Sulphide
Sealant) complete as per manufacture specification & direction of
engineer in charge.
i)- Waterproofing of Roof Top--- ii)- Groove Sqm 222.00 702.10 155866.20
Filling & Sealing Exposed Screed plaster-
iii)- Admixture Nerolac-Perma Plast-o-Proof STD-
( Rate Excluding Protection Plaster)
N:B: All the waterproofing treatment shall be executed by an authorized
applicator of our company. A written guarantee on non-judicial stamp
paper shall be submitted by the applicator for a minimum period of
5(Five) years from the date of completion for the satisfactory
performance of the entire waterproofing treatment system.
D. Dismantling Work 0.00 0.00
Dismantling brick or stone masonry in lime or cement mortar above 3m
1 height including stacking the useful materials for reuse and removing the Cum 603.36 1420.72 857205.62
debris within 50m lead. (Super structure)
Dismantling and removing doors, windows and ventilators including
2 removal of frame, hinges, fastening and stacking the same for reuse and Sqm 116.39 384.68 44773.87
removing the debris within 50m lead
Dismantling and removing old tiled flooring including removing the base
3 coarse and stacking the useful materials for reuse and removing the Sqm 455.00 120.36 54763.80
debris within 50m lead
Dismantling and removing R.C.C. columns beams slab staircase landing
4 lintels including stacking the useful materials for reuse and removing the Cum 438.92 1423.08 624618.27
debris within 50m lead
Dismantling and removing R.C.C. columns beams slab staircase landing
5 lintels including stacking the useful materials for reuse and removing the Sqm 97.44 168.74 16442.03
debris within 50m lead
Removal Of debrix by mechanical means including all cost conveyance
etc all complete.
INTERNAL P.H. & SANITARY WORK. :- GALLERY-3
GPH Works: Supplying all materials, labour, T&P and providing and
fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-
1 1785/89 (Sch-80) and pipe fittings of the following nominal borewith
clamps including making good the wall, ceiling and floor, testing all
complete as per specification and direction of the Engineer-in-charge.
a) Ground floor
20 mm CPVC SDR-11 pipes (Sentini/Oriplast/Supreme) Mtr 175.00 271.16 47453.70
25 mm CPVC SDR-11 pipes (Sentini/Oriplast/Supreme) Mtr 165.00 365.33 60279.12
32 mm UPVC SCH-40 pipes (Sentini/Oriplast/Supreme) Mtr 70.00 447.10 31297.14
40 mm UPVC SCH-40 pipes (Sentini/Oriplast/Supreme) Mtr 60.00 505.51 30330.72
50 mm UPVC SCH-40 pipes (Sentini/Oriplast/Supreme) Mtr 75.00 628.35 47126.25
supplying all materials, labour, T&P and cutting holes through existing
brick work including making good the damages in cement mortar (1:4)
for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all
complete as per P.H. specification and direction of Engineer-in-charge.
a) Ground Floor :- 250 mm thick wall Each 35.00 59.00 2065.00
Supplying all materials, labour, T&P and cutting hole in R.C.C floors,
roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and
3 fittings etc and repairing the holes after insertion of pipes etc with
cement concrete (1:2:4 ) including finishing complete so as to make it
leak proof as per direction of the Engineer-in-charge.
a) Ground Floor :- 250 mm thick wall Each 30.00 185.61 5568.42
Supplying all materials, labour, T&P and cutting grooves in pucca floors
4 and walls for taking G.I./P.V.C. pipes and making good the damages as
per direction of the E.I.C.
a) Ground Floor Mtr 340.00 198.95 67642.32
Supplying all materials, labour T&P and fitting and fixing brass/CP
5 fittings of the following nominal bore with supply of all joiniting materials
complete as per specification and direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour, T&P and fixing standard sized two way
Bib cock of Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making good the damages,
including cost of all materials complete as per PH specification complete
as per direction of Er-in-charge. 15mm dia CP Two way bib cock with
Flange Jaquar FUS-CHR-29041
Ground Floor Each 35.00 2458.53 86048.55
Supplying all materials, labour, T&P and fixing standard sized Bib cock
of Hindware/Jaquar/Parryware of approved make etc complete
including cutting the wall and making good the damages, including cost
of all materials complete as per PH specification complete as per
direction of Er-in-charge.15mm dia. nominal bore Short body Bib Cock
Jaquar CON-047KN
Ground Floor Each 6.00 1047.25 6283.50
Supplying all materials, labour, T&P and fixing Wall mixture 3-in-1
system with provision for both hand shower & overhead shower
c) complete with 115mm long bend pipe,connecting legs & wall flange .
including cost of all materials complete as per PH specification complete
as per direction of Er-in-charge.Jaquar FUS-CHR-29281
Ground Floor Each 18.00 6814.15 122654.63
Supplying all materials, labour, T&P and fixing standard sized 15mm dia
angular Stop cock of Hindware/Jaquar/Parryware of approved make
etc complete including cutting the wall and making good the damages,
including cost of all materials complete as per PH specification complete
as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall
flange Jaquar FUS-CHR-29053
Ground Floor Each 80.00 1442.20 115375.68
Supplying all materials, labour, T&P and fixing standard sized pillar
cock of Hindware/Jaquar/Parryware of approved make etc complete
including cutting the wall and making good the damages, including cost
of all materials complete as per PH specification and direction of
Engineering-in-charge. 15mm dia brass pillar cock Jaquar Jaquar FUS -
Ground Floor Each 26.00 2139.10 55616.70
Fixing of 32mm dia Brass / Gun meta ball Valve confirming to IS : 781-
f) 1995 of approved make as per specification complete as per direction of Each 12.00 1205.84 14470.10
Er-in-charge.32mm dia brass or gun metal full way valve (shakti make)
Fixing of 40mm dia Brass / Gun meta ball Valve confirming to IS : 781-
1995 of of approved make as per specification complete as per
direction of Er-in-charge.40mm dia brass or gun metal full way
valve(shakti make)
h) 15mm dia PVC connection pipe 450 mm long Each 25.00 118.00 2950.00
i) 15mm dia CP Extention Nipple Each 50.00 47.67 2383.60
Providing and fixing circular type stainless steel jalli (grating) with hole
j) for floor /nahani trap etc complete as per specification and direction of
the Engineer in charge.
Ground Floor Each 54.00 91.45 4938.30
Supplying all materials, labour, T&P and fixing 100 mm dia wall
mounted over head shower & Shower arm Hindware/Jaquar/Parryware
including cutting the wall and making good the damages, including cost
of all materials complete as per PH specification and direction of
Engineer-in-charge. 100 mm dia CP overhead shower with ArmJaquar -
Ground Floor Each 16.00 2813.83 45021.25
Supplying all materials, labour, T&P and fixing standard sized 15mm dia
Concealed Stop cock of Hindware/Jaquar/Parryware of approved
make etc complete including cutting the wall and making good the
damages, including cost of all materials complete as per PH specification
complete as per direction of Er-in-charge. Concealed stop cock Jaquar
Ground Floor Each 16.00 704.70 11275.14
Supplying all materials, labour, T&P and fixing Health Faucet of
Hindware/Jaquar/Parryware complete with Chromium plated brass
brackets fixed to wooden plugs with Chromium plated brass screws as
per specification and direction of the Engineer-In-Charge.
15mm dia CP Health Faucet of Jaquar 1.2mtr long, 8MM dia Jaquar
Ground Floor Each 35.00 2237.16 78300.67
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour, T&P and fixing Rotational moulded
polyethylene cylindrical vertical water storage tanks conforming to
IS:12701--1996 including cutting holes through the tank and fixing mild
steel ltubes and fittings and providing extra sockets and jam nuts, fixing
ball valve etc, including hoisting up to a height of 5 meters above ground
level and placing the tank to the required position and providing 1st class
K.B.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in
circular protection wall to support the tank, 12mm thick cement plaster
(1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt.
thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in
cement concrete (1:2:4) using 12mm size h.g.chips including centering
and shuttering, watering, curing, conveyance of all materials to worksite
etc all complete as per specification and direction of the Engineer-In-
2000 litre capacity water storage tanks in the roof of 1st floor. Each 15.00 32003.04 480045.62
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR
soil waste ventilating pipes and fittings of the following outside diameter
conforming to ISI No 13592/1992 to walls with nails, bobbins and
wooden plugs or laying in trenches including jointing with supply of
approved rubber lubricant by non-heat application method/as per
manufacturer's specification, testing, earthwork in excavation in all kinds
of soil and refilling of trenches as per specification and direction of the
Engineer-In-Charge.
a) In ground floor 0.00 0.00
110mm diameter U-PVC SWR pipes(Oriplast type-B/Supreme) Mtr 130.00 454.54 59089.68
110mm U-PVC door Tee Each 25.00 161.90 4047.40
110mm U-PVC offset Each 30.00 135.94 4078.08
110mm U-PVC door bend Each 35.00 155.41 5439.21
110mm U-PVC plain shoe bend Each 40.00 220.07 8802.80
110mm U-PVC vent cowl Each 30.00 45.31 1359.36
110mm U-PVC plain bend Each 40.00 85.31 3412.56
Supplying all materials,labour T&P and cutting holels through existing
brick or laterite masonry wall for taking H.C.I pipes and fittings including
making good the damages etc. all complete as per P.H.Specification and
direction of the Engineer-In-Charge.
250mm to 375mm thick wall Each 30.00 59.00 1770.00
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters
capacity low level flushing cistern of Hindware/Jaquar/Parryware with a
pair of cast iron or M.S. brackets complete with fittings such as siphonic
arrangements 15mm nominal size brass/pvc ball valve with polythene
float CP brass handle,unions and couplings for connection with inlet,
outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc
inlet connection pipe including cutting holes and making good the same
and connecting the flush bend with cistern and closet and connceting the
inlet pipe with suupply main etc all complete as per the specification and
direction of the Engineer-in-charge.
10 Liters capacity PVC cistern with 32mm dia flush bend. Hindware
sleek fresh single flush Starwhite, Size 47.6 X 15.5 X 32.5 cm
Ground Floor Each 41.00 1892.13 77577.33
Supplying all materials, labour, T&P and fixing vitreous china water
closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan)
of Hindware/Jaquar/Parryware duly embedded in cement concrete
(1:4:8) using 4cm size hard granite metal including fixing a pair of
11 vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI
'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan
including jointing the trap with pan in cement mortar (1:1) cutting the
floor and mending good the damages etc all complete as per
specification and direction of the Engineer-In-Charge.
Hindware Orissa Pan cat no 20004 Starwhite. Size- 53x41 cm
Ground Floor Each 6.00 3026.82 18160.91
Supplying all materials, labour, T&P and fixing the following vitreous
china Wash Down Water Closet (European type W.C. pan) of
Hindware/Jaquar/Parryware with integral 'p' or 's' trap to the floor with
wooden plug and chromium plated pedestal screws including jointing the
trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for
wash down water closet with chromium plated brass hinges and rubber
buffers including polishing etc all complete as per specification and
direction of the Engineer-In-Charge.
EWC with 'p' / S trap plain Hindware Cat No-20087 (S-10) Starwhite
type, size-57x35x39 cm, seat cover for Hindware seat cover
Premium starwhite.
Ground Floor Each 35.00 6660.16 233105.46
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour T&P and fixing wash basins of
Hindware/Jaquar/Parryware with hole for pillar taps with cast iron or
M.S.brackets painted white including cutting holes in walls and making
good the damages with supply of wooden plugs, screws and cement etc,
fixing pedestal for wash basin recessed at the back for the reception of
pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for
13 wash basin including brass check nut complete, fixing pillar taps capstan
head screw down high pressure lettered 'Hot' and 'Cold' with long
screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm
dia PVC inlet connection pipe and making connection with pillar cocks
and supply mains for wash basin, fixing 32mm dia CP brass waste, etc
all complete as per specification and direction of the Engineer-In-
Hindware ARIEL Wash Basin Size - 550mmx400x790mm, Cat.No.
10100 Starwhite & Hindware ARIEL Pedestal Cat -no- 11003
Ground Floor Each 2.00 5501.75 11003.50
14 Table Top Wash Basin
Supplying all materials, labour T&P and fixing Table top Wash Basin
Size - 565mmx425x140mm, Cat.No. Cat.No. KUS-WHT-35935 with all
fittings as per direction of the engineer-in -charge.
Ground Floor Each 26.00 9427.85 245124.00
Supplying all materials, labour, T&P and fixing Flat back large pattern
urinal of Hindware/Jaquar/Parryware the following sizes including
connecting the urinal with 32mm dia pvc waste pipe 910mm long by
means of white lead mixed with chopped hemp, fixing 32mm dia CP
15 dome waste, 15mm dia CP spreader including cutting holes in walls land
making good the damages with supply of wooden plugs, screws and
cement etc all complete as per specification and direction of the
Engineer in charge. Hindware Flat back large urinal cat no-60002
starwhite, Size-37.5x39x59 cm.
Ground Floor Each 20.00 7436.83 148736.64
Supply and fixing all materials, labour, T & P and providing urinal
partition with italian collection (pastel)- size- 75x16.5x36.5 cm Cat no-
61005 etc all complete as per direction of the Engineer-In-Charge. Make-
Ground Floor Each 21.00 1586.04 33306.80
Supplying all materials, labour, T&P and fixing mirror of superior glass
mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden
plugs with CP screws and washers complete as per specification and
direction of the Engineer-in-charge.
900mmx900mm size B.E.mirror (Alpina/Golden fish/Belgion)
Ground Floor Nos 28.00 908.95 25450.71
Supplying all materials, labour, T&P and fixing standard size glass-shelf
of Hindware/Jaquar/Parryware with CP brass brackets and guard rails
complete fixed to wooden plugs with CP screws as per specification and
direction of the Engineer-in-charge.
Jaquar glass shelf ACN-1171 N 600mm long
Ground Floor Each 28.00 1803.87 50508.25
Supplying all materials,labour, T&P and fixing standard sized CP towel
rail 24" of Hindware/Jaquar/Parryware complete with CP brass
brackets fixed to wooden plugs with CP screws as per specification and
direction of the Engineer-In-Charge
25mmx600mm long CP towel rail (Jaguar make) ACN-1111NM.
Ground Floor Each 16.00 1745.93 27934.85
Supplying all materials, labour, T&P and fixing standard sized
Chromium Plated brass towel ring complete with Chromium Plated
brass brackets fixed to wooden plugs with Chromium Plated brass
screws as per specification and direction of the Engineer in charge
Ground Floor Each 28.00 1450.85 40623.84
Supplying all materials, labour, T&P and fixing standard sized
Chromium Plated soap case of Hindware/Jaquar/Parryware complete
20 with Chromium Plated brass brackets fixed to wooden plugs with
Chromium Plated brass screws as per specification and direction of the
Engineer in charge
CP soap holder (Jaguar make) ACN-1131N.
Ground Floor Each 41.00 900.81 36933.29
Supplying all materials, labour, T&P and fixing standard sized Robe
Hook of Hindware/Jaquar/Parryware complete with all as per
specification and direction of the Engineer in charge. Jaquar Robe
hook AGA-BIV-31791
Ground Floor Nos 41.00 976.21 40024.77
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour, T&P and fixing standard sized Soap
Dispensor of Hindware/Jaquar/Parryware complete with all as per
specification and direction of the Engineer in charge. Soap dispense with
Glass Bottle. CAN-1135N.
Ground Floor Nos 28.00 2052.14 57459.86
Supply all materials, labour, T&P and providing fitting & fixing (Aqua
guard) pure Chill 80 PSS UV of size 750x570x1350 mm height with
water storage capacity 120 liters along with 2 nos of fancets 1 for cold
water and 1 for normal water including a flow of 1.5 ltr per minute etc. all
complete as per approved drawing, specification and direction of the
Ground Floor Nos 2.00 119528.10 239056.20
Matrix Set-1 (WB 65X35 with one pair mounting brackets, EWC &
24 cistern complete with fittings & seat cover, one no hinged rail 76 cm and
five nos of grab rail 60cm)
Ground Floor Nos 2.00 78575.02 157150.04
Providing and laying Matte Finish Vitrified floor tiles Model: Geostone
Mist 600x600 mm (thickness to be specified by the manufacturer) 1st
quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA
or equivalent approved make, colours & shades, except white, ivory,
grey, fume red brown, laid on 20 mm thick cement mortar 1:4
(1cement:4coarse sand) including pointing the joints with white cement
and matching pigments, etc. complete as per direction of Engineer-In-
Charge at all floors and all heights.
Ground Floor Sqm 167.69 1001.15 167886.99
Providing and fixing 1st quality Ceramic glazed wall tiles Model: Daino
light (Glossy) size-(300x600 )conforming to IS : 15622 (thickness to be
specified by the manufacturer) minimum thickness 5mm of NITCO,
SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours,
26 shades except burgundy, bottle green, black in skirting and dados over
12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3 kg per sqm including pointing in
white cement mixed with pigment of matching shade complete as per
direction of Engineer-In-Charge. In all floors and all heights.
Ground Floor Sqm 945.89 888.34 840271.74
Factory made single leaf rigid FRP(alternately called GRP) sandwich
composite door shutter of 32mm thick laminated with two GRP skins with
wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and
one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated
with orthopthalic palyester resin. The thickness of the skins shall not be
less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of
29mm thickness and a density of 20kg/cu.mtr shall be used as core
material. Wooden reinforcements made of seasoned sal wood block of
cross section not less than 28mmx32mm and also necessary sal wood
reinforcements for fitting the metal fittings such as tower bolts, aldrops,
handles etc shall be provided. A structural adhesive compatible with
(EPS) foam shall be used for bending the core material, the sal wood
reiforcements and the skins. The material and process for manufacturing
the door shutters shall conform to RV-TIFAC composites Design
Centre's standards and specifications and the door shutters tested in
conformation to IS: 4020-1998. The finish of door shutter will be plain
colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any
other colour using high quality pigments. Three heavy whight mild steel
butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of
shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)
Ground floor Sqm 86.94 6419.55 558116.02
EXTERNAL P.H. & SANITARY WORK. :- GALLERY-3 0 0.00
Supplying all materials, labour, T & P and constructing Gully trap
chamber of the following inside size with 8 cm thick R.C.C. precast cover
slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete
(1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash
brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering
(1:3) finished with a floating coat of neat cement including fixing 100mm
x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as
per aproved drawing, specification and direction of Engineer-in-charge.
250mmx250mm with RCC cover Each 17.00 1327.62 22569.51
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour, T & P and constructing Inspection
chamber of the following inside size with CC (1:3:6) mix using 40mm size
h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and
shaping the channel inside and benching with CC (1:2:4) using 12mm
size h.g. chips, 12mm thick cement plastering (1:3) finished with punning
2 to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in
(1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth
work in excavation in all kinds of soil and refilling the cavity around the
chamber including watering ,curing, conveyance of all materials to
worksite , payment of royality , taxes etc. all complete as per aproved
drawing , specification and direction of Engineer-in-charge.
Inside size 760mm x760mm x450mm Each 15.00 9659.95 144899.28
Supplying all materials, labour, T&P and laying in trenches (to level or
slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the
following outside dia for class-3(0.60mpa) including jointing with supply
of approved solvent cement by non-heat application method/as per
3 manufacturer’s specification, providing and laying in trench cement
concrete (1:4:8) with 40mm size hard granite metal in the Type C-1
standard bedding surrounding or encasing including concrete for
bedding and curing etc all complete as per PH specification and direction
of the Engineer-in-charge.
a) 110 mm dia U-PVC pipes Class-3 (0.60 mpa) mtr 60.00 1202.07 72123.96
b) 160 mm dia U-PVC pipes Class-3 (0.60 mpa) mtr 80.00 1956.09 156486.88
Supplying all materials, labour, T&P and constructing Man hole chamber
of the following size with cement concrete (1:3:6) using 40 mm size HG
metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and
shaping the channel inside and benching with CC (1:2:4) mix using 12
mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to
4 inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4)
mix using 12 mm size H.G chips with RCC man hole cover , earth work
in all kinds of soil and refilling the cavity around the camber including
watering, curing, conveyance of all materials to worksite payment of
royalty, taxes etc. all completed as per approved drawing, specification
and direction of Engineer-in-charge.
a) Inside size 900mmx900mmx900mm each 12.00 17828.97 213947.69
b) addl depth of 0.30m upto 4.50m depth each 5.00 2051.08 10255.38
5 Construction of 50 users septic tank (2nos)Size-(4x1.4x2)mtr
Earth work in excavation of foundation in all kinds of soil within 50m
initial lead and 1.5m initial lift including rough dressing & breaking clods
to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in
depth and as per direction of the Engineer-in-Charge.
All type of Soil Cum 74.25 253.94 18854.75
Filling at all depth with available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not exceeding 15 cm
in depth : consolidating each deposited layer by ramming and watering
complete (lead upto 100m) as directed by the Engineer-In-charge.
Supplying of filling sand in foundation and over areas including watering,
c) ramming, consolidating and dressing, labours, tools, taxes etc. all Cum 9.90 560.52 5549.18
complete as per the specification and direction of E.I.C.
Providing and laying plain cement concrete 1:3:6 (1 cement: 3 sand : 6
stone aggregate 40mm nominal size) as levelling course in foundation
and plinth etc. including tempering, curring, shuttering etc. complete all
depth and height.
Supplying all materials, labour, T&P and providing cement concrete
(1:2:4) with 12m size hard broken granite chips including watering,
d) curing, conveyance of all materials to worksite, payment of royalty, taxes Cum 3.90 7029.17 27413.75
etc all complete as per specification and direction of the Engineer in
Supplying all materials, labour, T&P and providing brick work with Fly
Ash bricks having crushing strength not less than 75kg/cm² with
dimensional tolerance ± 8 percent in cement mortar (1:4) including
watering, curing, conveyance of all materials to worksite, payment of
royalty, taxes etc all complete as per specification and direction of the
Engineer in charge
Supplying all materials, labour, T&P and providing 12mm thick cement
plaster (1:6) on brickwork including watering, curing, conveyance of all
materials to worksite, payment of royalty, taxes etc all complete as per
specification and direction of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Providing 16mm. thick cement plaster in all floors at all height with
cement mortar of mix (1:6) with OPC 53 grade cement finished smooth
to inside smooth surface of brick masonry walls after racking out the
joints including watering and curing, rounding of corners etc. complete
with cost, coveyance, loading and unloading, royalties and taxes of all
materials and cost of all labours, sundries, T&P and scaffolding required
for the work etc. complete in all respect as desired by the Engineer in
Supplying all materials, labour, T&P and providing cement punning
including watering, curing, conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as per specification and
direction of the Engineer in charge
Supplying all materials, labour, T&P and providing M.S reinforcement for
R.C.C work including cutting, bending, binding, and tying the grills and
h) placing in position including cost of binding wire 18 to 20 gauge, Qntl 9.13 10414.34 95061.60
conveyance of all materials to worksite, payment of royalty, taxes etc all
complete as per specification and direction of the Engineer in charge
Providing, lifting, hoisting and laying Reinforced cement concrete of M-
250 grade as per approved designs and drawings having a minimum
compressive strength (in work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test conducted in accordance with I.S.
516 using 12 mm. to 20 mm. size black hard crushed broken granite
stone chips and screened and washed sharp sand for mortar of
approved quality from approved quarry, washed and cleaned ( 20mm.
size chips not to exceeds 25 % ) to be mixed in concrete mixture with
Portland slag cement (PSC) including hoisting, lowering, laying and
i) compaction concrete by using vibrators, watering and curing for 28 days, Cum 0.08 5822.47 458.52
centering and shuttering then after dismantling and removing debris from
the work site and finishing the exposed surface smooth providing
grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all
labours, sundries, T & P required of the work etc. complete in all respect
as directed by the Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending etc. of M.S. rods or tor steel
tying the grills and placing in proper position.
Supplying all materials, labour, T&P and making MS step iron in 20mm
diameter MS steel bars and fixing into walls of man hole/septic tank duly
embedded in cement concrete (1:3:6) complete as per specification and
direction of the Engineer in charge.
Supplying all materials, labour, T&P and laying in trenches ( to level or
slope ) and jointing with provision of stiff mixture of cement mortar in
k) proportion of 1:1 for salt glazed stoneware pipes, Grade—A of the Mtr 5.00 885.00 4425.00
following internal diameters including testing of pipes and joints
complete. 110mm diameter UPC pipe
Supplying all materials, labour, T&P and constructing soakway pit of the
following size with precast RCC rings joined loose, gravel backing in the
rear of well steining, precast RCC cover slab in cement concrete (1:2:4)
using 12mm size hg chips fitted with iron lifting handles including cutting
6 hole in the rings for inlet pipe,earthwork in open well excavation in all 0.00 0.00
kinds of soil and refilling of cavity around the pit & painting the iron
works, watering, curing, conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as per approved specification
and direction of the Engineer-In-Charge
a) RCC rings soakway pit 1.2m dia x 2.0m deep each 1.00 19667.53 19667.53
Construction of 1 No production wells including scientific source
finding through consolidated and unconsolidated rock with down
the hammer drilling rig or combination rig with PVC pipe and
installation of submersible pump set with all acessories
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Labour for drilling a perfectly vertical bore hole of specified dia for a
specified depth below ground level through consolidated and
unconsolidated rock with down the hole hammer drilling rig or
combination rig as required to suit the site condition as per the direction
of the Engineer in charge including use of own rig with its accessories,
tools and plant and consumables etc for lowering of 200mm/150mm dia
1 G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or
without well screen as per the necessity for soft, medium, hard and
boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent
collapse of overburden is to be provided by the contractor including
lowering and withdrawing after completion of the tube well), 200mm dia
to 400mm dia in overburden portion including packing of gravel supplied
by the contractor for 400mm dia bore only
a Drilling of 200mm dia bore
b Drilling of 150mm dia bore
Lowering the following size of G.I/P.V.C/M.S housing pipes with or
without slotted pipes as per the necessity from ground level up to
45.00m depth and fitted and fixed up in perfectly vertical position
2 including cutting and threading of pipes and slotted pipes and supplying
and fixing all jointing materials, tools and plant etc all complete and
keeping the top of casing pipe threaded including plugging tube wells to
prevent entry of foreign materials.
a Lowering of 200mm dia P.V.C casing pipes
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having
threads in accordance with DIN 2999 part-1/DIN-42225 part-II
specification length of pipe (laying length) will be 3 mtrs. The pipes shall
be supplied with both external and threaded with free socket. The pipe
having external thread at one end i.e female and or belled end. The
3 female end having internal thread is to be belled in order to accept the
male end while jointing pipes with a bore threading shall be provided with
a greave at the roof of the male thread accomodate flexible PVC/Rubber
'O' ring to make the joint water tight colour of the pipe shall be blue. The
name of the manufacture along with batch No class of pipe shall be
stranded legibly of each pipe length.
i 200mm dia PVC (sch-80) pipe mtr 45.00 1927.88 86754.78
Supplying all materials, labour, T&P and providing and providing sanitary
sealing by cement concrete grouting of annular space around
GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to
plug the bore hole excluding cost of cement all complete as per direction
of the Engineer in charge. Minimum one metre of casing pipe to be
inserted in the bore into the rock at the bottom to ensure sanitary sealing
(excluding cost of cement which will be supplied directly by the
Cleaning and developing the tube well with supply of compressor worked
till clear and adequate discharge is obtained from the tube well including
supply and use of all necessary equipment and labour as per direction of
the Engineer in charge
i By DTH Rig Each 1.00 5893.86 5893.86
Supplying all materials, labour, T&P and providing, fitting and fixing
submersible pump with squirrel cage induction type submersible type
submersible electric motor to run on 3 phase/1 phase line voltage
ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following
6 specifications with suitable control panel, jointing with GI/PVC/HDPE
pipes, electrification, testing, commissioning, trial running, conveyance of
all materials to worksite, payment of taxes etc all complete as per
specification and direction of the Engineer in charge (Texmo/Crompton
Greaves/Kirloskar make)
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr
a with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm Each 2.00 19749.90 39499.79
(keeping 100% standby)
b DOL Control panel Each 1.00 4490.49 4490.49
c 40mm dia steel short piece Each 1.00 179.71 179.71
d Well cap Each 1.00 179.71 179.71
e 50mm size CI bracket Pair 1.00 107.73 107.73
f 2.50sqmm flat cable Mtr 90.00 151.16 13604.22
g 20mm dia rigid UPVC pipes Mtr 35.00 8.14 284.97
i Steel rope with cover Mtr 35.00 31.51 1102.71
j Labour charges for lowering including transportation Each 1.00 2360.00 2360.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour, T&P and providing and fixing to wall or
ceiling and floor HDPE pipes and pipe fittings conforming to IS:
4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and
jointing by Fusion welding method including testing, making good the
wall, ceiling and floor all complete as per specification and direction of
the Engineer in charge
i 32mm HDPE pipes (Finolex/Supreme make) mtr 85.00 117.76 10009.94
INTERNAL P.H. & SANITARY WORK. :- TOILET BLOCK
GPH Works: Supplying all materials, labour, T&P and providing and
fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-
1 1785/89 (Sch-80) and pipe fittings of the following nominal borewith
clamps including making good the wall, ceiling and floor, testing all
complete as per specification and direction of the Engineer-in-charge.
a) Ground floor
20 mm CPVC SDR-11 pipes (Sentini/Oriplast/Supreme) Mtr 150.00 271.16 40674.60
25 mm CPVC SDR-11 pipes (Sentini/Oriplast/Supreme) Mtr 160.00 365.33 58452.48
32 mm UPVC SCH-40 pipes (Sentini/Oriplast/Supreme) Mtr 80.00 447.10 35768.16
40 mm UPVC SCH-40 pipes (Sentini/Oriplast/Supreme) Mtr 90.00 505.51 45496.08
50 mm UPVC SCH-40 pipes (Sentini/Oriplast/Supreme) Mtr 100.00 628.35 62835.00
supplying all materials, labour, T&P and cutting holes through existing
brick work including making good the damages in cement mortar (1:4)
for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all
complete as per P.H. specification and direction of Engineer-in-charge.
a) Ground Floor :- 250 mm thick wall Each 60.00 59.00 3540.00
Supplying all materials, labour, T&P and cutting hole in R.C.C floors,
roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and
3 fittings etc and repairing the holes after insertion of pipes etc with
cement concrete (1:2:4 ) including finishing complete so as to make it
leak proof as per direction of the Engineer-in-charge.
a) Ground Floor :- 250 mm thick wall Each 70.00 185.61 12992.98
Supplying all materials, labour, T&P and cutting grooves in pucca floors
4 and walls for taking G.I./P.V.C. pipes and making good the damages as
per direction of the E.I.C.
a) Ground Floor Mtr 310.00 198.95 61673.88
Supplying all materials, labour T&P and fitting and fixing brass/CP
5 fittings of the following nominal bore with supply of all joiniting materials
complete as per specification and direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and fixing standard sized two way
Bib cock of Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making good the damages,
including cost of all materials complete as per PH specification complete
as per direction of Er-in-charge. 15mm dia CP Two way bib cock with
Flange Jaquar CON-041KN.
Ground Floor Each 22.00 1389.92 30578.28
Supplying all materials, labour, T&P and fixing standard sized Bib cock
of Hindware/Jaquar/Parryware of approved make etc complete
including cutting the wall and making good the damages, including cost
of all materials complete as per PH specification complete as per
direction of Er-in-charge.15mm dia. nominal bore Short body Bib Cock
Jaquar-CON-047KN.
Ground Floor Each 8.00 1047.25 8378.00
Supplying all materials, labour, T&P and fixing standard sized 15mm dia
angular Stop cock of Hindware/Jaquar/Parryware of approved make
etc complete including cutting the wall and making good the damages,
including cost of all materials complete as per PH specification complete
as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall
flange Jaquar CON-059KN.
Ground Floor Each 84.00 1047.25 87969.00
Supplying all materials, labour, T&P and fixing standard sized pillar
cock of Hindware/Jaquar/Parryware of approved make etc complete
including cutting the wall and making good the damages, including cost
of all materials complete as per PH specification and direction of
Engineering-in-charge. 15mm dia brass pillar cock Jaquar Continental
Cat. No.- CON -011KN.
Ground Floor Each 22.00 1047.25 23039.50
Fixing of 32mm dia Brass / Gun meta ball Valve confirming to IS : 781-
f) 1995 of approved make as per specification complete as per direction of Each 8.00 1205.84 9646.74
Er-in-charge.32mm dia brass or gun metal full way valve (shakti make)
Fixing of 40mm dia Brass / Gun meta ball Valve confirming to IS : 781-
1995 of of approved make as per specification complete as per
direction of Er-in-charge.40mm dia brass or gun metal full way
valve(shakti make)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
h) 15mm dia PVC connection pipe 450 mm long Each 30.00 118.00 3540.00
i) 15mm dia CP Extention Nipple Each 30.00 47.67 1430.16
Providing and fixing circular type stainless steel jalli (grating) with hole
j) for floor /nahani trap etc complete as per specification and direction of
the Engineer in charge.
Ground Floor Each 30.00 91.45 2743.50
Supplying all materials, labour, T&P and fixing Health Faucet of
Hindware/Jaquar/Parryware complete with Chromium plated brass
brackets fixed to wooden plugs with Chromium plated brass screws as
per specification and direction of the Engineer-In-Charge.
15mm dia CP Health Faucet of Jaquar 1.2mtr long, 8MM dia Jaquar
Ground Floor Each 22.00 2237.16 49217.56
Supplying all materials, labour, T&P and fixing Rotational moulded
polyethylene cylindrical vertical water storage tanks conforming to
IS:12701--1996 including cutting holes through the tank and fixing mild
steel ltubes and fittings and providing extra sockets and jam nuts, fixing
ball valve etc, including hoisting up to a height of 5 meters above ground
level and placing the tank to the required position and providing 1st class
K.B.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in
circular protection wall to support the tank, 12mm thick cement plaster
(1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt.
thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in
cement concrete (1:2:4) using 12mm size h.g.chips including centering
and shuttering, watering, curing, conveyance of all materials to worksite
etc all complete as per specification and direction of the Engineer-In-
2000 litre capacity water storage tanks in the roof of 1st floor. Each 8.00 32003.04 256024.33
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR
soil waste ventilating pipes and fittings of the following outside diameter
conforming to ISI No 13592/1992 to walls with nails, bobbins and
wooden plugs or laying in trenches including jointing with supply of
approved rubber lubricant by non-heat application method/as per
manufacturer's specification, testing, earthwork in excavation in all kinds
of soil and refilling of trenches as per specification and direction of the
Engineer-In-Charge.
a) In ground floor 0.00 0.00
110mm diameter U-PVC SWR pipes(Oriplast type-B/Supreme) Mtr 100.00 454.54 45453.60
110mm U-PVC door Tee Each 30.00 161.90 4856.88
110mm U-PVC offset Each 30.00 135.94 4078.08
110mm U-PVC door bend Each 40.00 155.41 6216.24
110mm U-PVC plain shoe bend Each 40.00 220.07 8802.80
110mm U-PVC vent cowl Each 30.00 45.31 1359.36
110mm U-PVC plain bend Each 40.00 85.31 3412.56
Supplying all materials,labour T&P and cutting holels through existing
brick or laterite masonry wall for taking H.C.I pipes and fittings including
making good the damages etc. all complete as per P.H.Specification and
direction of the Engineer-In-Charge.
250mm to 375mm thick wall Each 60.00 59.00 3540.00
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters
capacity low level flushing cistern of Hindware/Jaquar/Parryware with a
pair of cast iron or M.S. brackets complete with fittings such as siphonic
arrangements 15mm nominal size brass/pvc ball valve with polythene
float CP brass handle,unions and couplings for connection with inlet,
outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc
inlet connection pipe including cutting holes and making good the same
and connecting the flush bend with cistern and closet and connceting the
inlet pipe with suupply main etc all complete as per the specification and
direction of the Engineer-in-charge.
10 Liters capacity PVC cistern with 32mm dia flush bend. Hindware
sleek fresh single flush Starwhite, Size 47.6 X 15.5 X 32.5 cm
Ground Floor Each 30.00 1892.13 56763.90
Supplying all materials, labour, T&P and fixing vitreous china water
closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan)
of Hindware/Jaquar/Parryware duly embedded in cement concrete
(1:4:8) using 4cm size hard granite metal including fixing a pair of
11 vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI
'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan
including jointing the trap with pan in cement mortar (1:1) cutting the
floor and mending good the damages etc all complete as per
specification and direction of the Engineer-In-Charge.
Hindware Orissa Pan cat no 20004 Starwhite. Size- 53x41 cm
Ground Floor Each 8.00 3026.82 24214.54
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour, T&P and fixing the following vitreous
china Wash Down Water Closet (European type W.C. pan) of
Hindware/Jaquar/Parryware with integral 'p' or 's' trap to the floor with
wooden plug and chromium plated pedestal screws including jointing the
trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for
wash down water closet with chromium plated brass hinges and rubber
buffers including polishing etc all complete as per specification and
direction of the Engineer-In-Charge.
EWC with 'p' / S trap plain Hindware Cat No-20087 (S-10) Starwhite
type, size-57x35x39 cm, seat cover for Hindware seat cover
Premium starwhite.
Ground Floor Each 22.00 6660.16 146523.43
13 Counter Top Wash Basin
Supplying all materials, labour T&P and fixing counter top Wash Basin
Size - 545mmx545x180mm, Cat.No. FSS-WHT-29601 with all fittings as
per direction of the engineer-in -charge.
Ground Floor Each 12.00 8071.55 96858.65
Supplying all materials, labour, T&P and fixing Flat back large pattern
urinal of Hindware/Jaquar/Parryware the following sizes including
connecting the urinal with 32mm dia pvc waste pipe 910mm long by
means of white lead mixed with chopped hemp, fixing 32mm dia CP
14 dome waste, 15mm dia CP spreader including cutting holes in walls land
making good the damages with supply of wooden plugs, screws and
cement etc all complete as per specification and direction of the
Engineer in charge. Hindware Flat back large urinal cat no-60002
starwhite, Size-37.5x39x59 cm.
Ground Floor Each 40.00 7436.83 297473.28
Supply and fixing all materials, labour, T & P and providing urinal
partition with italian collection (pastel)- size- 75x16.5x36.5 cm Cat no-
61005 etc all complete as per direction of the Engineer-In-Charge. Make-
Ground Floor Each 42.00 1586.04 66613.60
Supplying all materials, labour, T&P and fixing mirror of superior glass
mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden
plugs with CP screws and washers complete as per specification and
direction of the Engineer-in-charge.
900mmx900mm size B.E.mirror (Alpina/Golden fish/Belgion)
Ground Floor Nos 12.00 908.95 10907.45
Supplying all materials, labour, T&P and fixing standard size glass-shelf
of Hindware/Jaquar/Parryware with CP brass brackets and guard rails
complete fixed to wooden plugs with CP screws as per specification and
direction of the Engineer-in-charge.
Jaquar glass shelf ACN-1171 N 600mm long
Ground Floor Each 12.00 1803.87 21646.39
Supplying all materials,labour, T&P and fixing standard sized CP towel
rail 24" of Hindware/Jaquar/Parryware complete with CP brass
brackets fixed to wooden plugs with CP screws as per specification and
direction of the Engineer-In-Charge
25mmx600mm long CP towel rail (Jaguar make) ACN-1111NM.
Ground Floor Each 4.00 1745.93 6983.71
Supplying all materials, labour, T&P and fixing standard sized
Chromium Plated brass towel ring complete with Chromium Plated
brass brackets fixed to wooden plugs with Chromium Plated brass
screws as per specification and direction of the Engineer in charge
Ground Floor Each 12.00 1450.85 17410.22
Supplying all materials, labour, T&P and fixing standard sized
Chromium Plated soap case of Hindware/Jaquar/Parryware complete
20 with Chromium Plated brass brackets fixed to wooden plugs with
Chromium Plated brass screws as per specification and direction of the
Engineer in charge
CP soap holder (Jaguar make) ACN-1131N.
Ground Floor Each 12.00 900.81 10809.74
Supplying all materials, labour, T&P and fixing standard sized Robe
Hook of Hindware/Jaquar/Parryware complete with all as per
specification and direction of the Engineer in charge. Jaquar Robe
hook AGA-BIV-31791
Ground Floor Nos 30.00 976.21 29286.42
Supplying all materials, labour, T&P and fixing standard sized Soap
Dispensor of Hindware/Jaquar/Parryware complete with all as per
specification and direction of the Engineer in charge. Soap dispense with
Glass Bottle. CAN-1135N.
Ground Floor Nos 12.00 2052.14 24625.66
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supply all materials, labour, T&P and providing fitting & fixing (Aqua
guard) pure Chill 80 PSS UV of size 750x570x1350 mm height with
water storage capacity 120 liters along with 2 nos of fancets 1 for cold
water and 1 for normal water including a flow of 1.5 ltr per minute etc. all
complete as per approved drawing, specification and direction of the
Ground Floor Nos 4.00 119528.10 478112.40
EXTERNAL P.H. & SANITARY WORK. :- TOILET BLOCK
Supplying all materials, labour, T & P and constructing Gully trap
chamber of the following inside size with 8 cm thick R.C.C. precast cover
slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete
(1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash
brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering
(1:3) finished with a floating coat of neat cement including fixing 100mm
x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as
per aproved drawing, specification and direction of Engineer-in-charge.
250mmx250mm with RCC cover Each 16.00 1327.62 21241.89
Supplying all materials, labour, T & P and constructing Inspection
chamber of the following inside size with CC (1:3:6) mix using 40mm size
h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and
shaping the channel inside and benching with CC (1:2:4) using 12mm
size h.g. chips, 12mm thick cement plastering (1:3) finished with punning
2 to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in
(1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth
work in excavation in all kinds of soil and refilling the cavity around the
chamber including watering ,curing, conveyance of all materials to
worksite , payment of royality , taxes etc. all complete as per aproved
drawing , specification and direction of Engineer-in-charge.
Inside size 760mm x760mm x450mm Each 20.00 9659.95 193199.04
Supplying all materials, labour, T&P and laying in trenches (to level or
slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the
following outside dia for class-3(0.60mpa) including jointing with supply
of approved solvent cement by non-heat application method/as per
3 manufacturer’s specification, providing and laying in trench cement
concrete (1:4:8) with 40mm size hard granite metal in the Type C-1
standard bedding surrounding or encasing including concrete for
bedding and curing etc all complete as per PH specification and direction
of the Engineer-in-charge.
a) 110 mm dia U-PVC pipes Class-3 (0.60 mpa) mtr 140.00 1202.07 168289.24
b) 160 mm dia U-PVC pipes Class-3 (0.60 mpa) mtr 120.00 1956.09 234730.32
Supplying all materials, labour, T&P and constructing Man hole chamber
of the following size with cement concrete (1:3:6) using 40 mm size HG
metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and
shaping the channel inside and benching with CC (1:2:4) mix using 12
mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to
4 inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4)
mix using 12 mm size H.G chips with RCC man hole cover , earth work
in all kinds of soil and refilling the cavity around the camber including
watering, curing, conveyance of all materials to worksite payment of
royalty, taxes etc. all completed as per approved drawing, specification
and direction of Engineer-in-charge.
a) Inside size 900mmx900mmx900mm each 20.00 17828.97 356579.48
b) addl depth of 0.30m upto 4.50m depth each 10.00 2051.08 20510.76
5 Construction of 100 users septic tank. Size:- (8x2.6x2) mtr
Earth work in excavation of foundation in all kinds of soil within 50m
initial lead and 1.5m initial lift including rough dressing & breaking clods
to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in
depth and as per direction of the Engineer-in-Charge.
All type of Soil Cum 171.00 253.94 43423.06
Filling at all depth with available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not exceeding 15 cm
in depth : consolidating each deposited layer by ramming and watering
complete (lead upto 100m) as directed by the Engineer-In-charge.
Supplying of filling sand in foundation and over areas including watering,
c) ramming, consolidating and dressing, labours, tools, taxes etc. all Cum 11.40 560.52 6389.97
complete as per the specification and direction of E.I.C.
Providing and laying plain cement concrete 1:3:6 (1 cement: 3 sand : 6
stone aggregate 40mm nominal size) as levelling course in foundation
and plinth etc. including tempering, curring, shuttering etc. complete all
depth and height.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour, T&P and providing cement concrete
(1:2:4) with 12m size hard broken granite chips including watering,
e) curing, conveyance of all materials to worksite, payment of royalty, taxes Cum 5.20 7029.17 36551.66
etc all complete as per specification and direction of the Engineer in
First class Fly Ash Brick masonry using F.A. bricks of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm.
in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC)
and screened & washed sand for mortar after immersing the bricks for 6
(Six) hours in water before use in Foundation & Plinth including splays
cutting, circular moulding, corbelling, chamfering and similar such type of
works, watering and curing etc. including cost, conveyance, loading,
unloading, royalties and taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the works etc. complete in all
respect as directed by the Engineer-in-Charge.
Supplying all materials, labour, T&P and providing 12mm thick cement
plaster (1:6) on brickwork including watering, curing, conveyance of all
materials to worksite, payment of royalty, taxes etc all complete as per
specification and direction of the Engineer in charge
Providing 16mm. thick cement plaster in all floors at all height with
cement mortar of mix (1:6) with OPC 53 grade cement finished smooth
to inside smooth surface of brick masonry walls after racking out the
joints including watering and curing, rounding of corners etc. complete
with cost, coveyance, loading and unloading, royalties and taxes of all
materials and cost of all labours, sundries, T&P and scaffolding required
for the work etc. complete in all respect as desired by the Engineer in
Supplying all materials, labour, T&P and providing cement punning
including watering, curing, conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as per specification and
direction of the Engineer in charge
Supplying all materials, labour, T&P and providing M.S reinforcement for
R.C.C work including cutting, bending, binding, and tying the grills and
j) placing in position including cost of binding wire 18 to 20 gauge, Qntl 9.98 10414.34 103924.73
conveyance of all materials to worksite, payment of royalty, taxes etc all
complete as per specification and direction of the Engineer in charge
Providing, lifting, hoisting and laying Reinforced cement concrete of M-
250 grade as per approved designs and drawings having a minimum
compressive strength (in work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test conducted in accordance with I.S.
516 using 12 mm. to 20 mm. size black hard crushed broken granite
stone chips and screened and washed sharp sand for mortar of
approved quality from approved quarry, washed and cleaned ( 20mm.
size chips not to exceeds 25 % ) to be mixed in concrete mixture with
Portland slag cement (PSC) including hoisting, lowering, laying and
k) compaction concrete by using vibrators, watering and curing for 28 days, Cum 10.73 6229.71 66844.74
centering and shuttering then after dismantling and removing debris from
the work site and finishing the exposed surface smooth providing
grooves or beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and cost of all
labours, sundries, T & P required of the work etc. complete in all respect
as directed by the Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending etc. of M.S. rods or tor steel
tying the grills and placing in proper position.
Supplying all materials, labour, T&P and making MS step iron in 20mm
diameter MS steel bars and fixing into walls of man hole/septic tank duly
embedded in cement concrete (1:3:6) complete as per specification and
direction of the Engineer in charge.
Supplying all materials, labour, T&P and laying in trenches ( to level or
slope ) and jointing with provision of stiff mixture of cement mortar in
m) proportion of 1:1 for salt glazed stoneware pipes, Grade—A of the Mtr 10.00 885.00 8850.00
following internal diameters including testing of pipes and joints
complete. 110mm diameter UPC pipe
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour, T&P and constructing soakway pit of the
following size with precast RCC rings joined loose, gravel backing in the
rear of well steining, precast RCC cover slab in cement concrete (1:2:4)
using 12mm size hg chips fitted with iron lifting handles including cutting
6 hole in the rings for inlet pipe,earthwork in open well excavation in all
kinds of soil and refilling of cavity around the pit & painting the iron
works, watering, curing, conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as per approved specification
and direction of the Engineer-In-Charge
a) RCC rings soakway pit 1.2m dia x 2.0m deep each 2.00 19667.53 39335.06
Construction of 1 No production wells including scientific source
finding through consolidated and unconsolidated rock with down
the hammer drilling rig or combination rig with PVC pipe and
installation of submersible pump set with all acessories
Labour for drilling a perfectly vertical bore hole of specified dia for a
specified depth below ground level through consolidated and
unconsolidated rock with down the hole hammer drilling rig or
combination rig as required to suit the site condition as per the direction
of the Engineer in charge including use of own rig with its accessories,
tools and plant and consumables etc for lowering of 200mm/150mm dia
1 G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or
without well screen as per the necessity for soft, medium, hard and
boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent
collapse of overburden is to be provided by the contractor including
lowering and withdrawing after completion of the tube well), 200mm dia
to 400mm dia in overburden portion including packing of gravel supplied
by the contractor for 400mm dia bore only
a Drilling of 200mm dia bore
b Drilling of 150mm dia bore
Lowering the following size of G.I/P.V.C/M.S housing pipes with or
without slotted pipes as per the necessity from ground level up to
45.00m depth and fitted and fixed up in perfectly vertical position
2 including cutting and threading of pipes and slotted pipes and supplying
and fixing all jointing materials, tools and plant etc all complete and
keeping the top of casing pipe threaded including plugging tube wells to
prevent entry of foreign materials.
a Lowering of 200mm dia P.V.C casing pipes
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having
threads in accordance with DIN 2999 part-1/DIN-42225 part-II
specification length of pipe (laying length) will be 3 mtrs. The pipes shall
be supplied with both external and threaded with free socket. The pipe
having external thread at one end i.e female and or belled end. The
3 female end having internal thread is to be belled in order to accept the
male end while jointing pipes with a bore threading shall be provided with
a greave at the roof of the male thread accomodate flexible PVC/Rubber
'O' ring to make the joint water tight colour of the pipe shall be blue. The
name of the manufacture along with batch No class of pipe shall be
stranded legibly of each pipe length.
i 200mm dia PVC (sch-80) pipe mtr 90.00 1927.88 173509.56
Supplying all materials, labour, T&P and providing and providing sanitary
sealing by cement concrete grouting of annular space around
GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to
plug the bore hole excluding cost of cement all complete as per direction
of the Engineer in charge. Minimum one metre of casing pipe to be
inserted in the bore into the rock at the bottom to ensure sanitary sealing
(excluding cost of cement which will be supplied directly by the
Cleaning and developing the tube well with supply of compressor worked
till clear and adequate discharge is obtained from the tube well including
supply and use of all necessary equipment and labour as per direction of
the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supplying all materials, labour, T&P and providing, fitting and fixing
submersible pump with squirrel cage induction type submersible type
submersible electric motor to run on 3 phase/1 phase line voltage
ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following
6 specifications with suitable control panel, jointing with GI/PVC/HDPE
pipes, electrification, testing, commissioning, trial running, conveyance of
all materials to worksite, payment of taxes etc all complete as per
specification and direction of the Engineer in charge (Texmo/Crompton
Greaves/Kirloskar make)
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr
a with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm Each 4.00 19749.90 78999.58
(keeping 100% standby)
b DOL Control panel Each 2.00 4490.49 8980.98
c 40mm dia steel short piece Each 2.00 179.71 359.43
d Well cap Each 2.00 179.71 359.43
e 50mm size CI bracket Pair 2.00 107.73 215.47
f 2.50sqmm flat cable Mtr 180.00 151.16 27208.44
g 20mm dia rigid UPVC pipes Mtr 70.00 8.14 569.94
i Steel rope with cover Mtr 70.00 31.51 2205.42
j Labour charges for lowering including transportation Each 2.00 2360.00 4720.00
Supplying all materials, labour, T&P and providing and fixing to wall or
ceiling and floor HDPE pipes and pipe fittings conforming to IS:
4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and
jointing by Fusion welding method including testing, making good the
wall, ceiling and floor all complete as per specification and direction of
the Engineer in charge
i 32mm HDPE pipes (Finolex/Supreme make) mtr 170.00 117.76 20019.88
A. GALLERY -2&4 (ELECTRICAL WORK)
INTERNAL WIRING.
Recessed wiring to light point / first light of group control/ call bell point/
exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked in 20 mm dia non-
metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked
and ceiling rose ISI marked mounted on G.I modular box with face plate
& cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single
core multistrand copper conductor as earth wire including all accesories
and connection as per direction of Engineer in Charge. (Make of wire
Finolex /Polycab/ Anchor / Havels) (Make of modular
box,cover,switch & socket-Legrand Myrios/schneider opale)
Recessed wiring to secondary light point looped from primary light point
with 1.5sqmm FRLSH PVC insulated single core multistrand copper
conductor of ISI marked with 20mm dia non-metallic PVC conduit with
1.5sqmm FRLSH PVC insulated single core multistrand copper
conductor for running earth including 3 plate ISI marked Ceiling rose
with all accessories & connection as per direction of Engineer-in-charge.
(Make of wire Finolex /Polycab/ Anchor / Havels) Average Length: 3
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in
type modular switch ISI marked mounted on G.I moular box with face
plate & cover of suitable size including all accesories and connection on
same switch board as per direction of Engineer-in-charge.
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH
PVC insulated single core multistrand copper conductor of ISI marked in
20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type
switch ISI marked mounted on G.I moular box with face plate & cover of
suitable size , with 1.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire including all accesories and
connection on separate board as per direction of Engineer-in-
charge.(Make of wire Finolex /Polycab/ Anchor / Havels) Group C
Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos
6Amp, 250 V clip in type switch ISI marked mounted on single G.I
5 moular box with face plate & cover of suitable size including all Nos. 10 1096.22 10962.20
accesories and connection on separate board as per direction of
Engineer-in-charge.
Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip
in type switch ISI marked mounted on G.I moular box with face plate &
6 cover of suitable size including all accesories and connection as per Nos. 10 928.66 9286.60
direction of Engineer-in-charge. 25Nos for Stage Light,3Nos For
Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 2 x 6 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm
10 thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core Mtrs 750 160.98 120731.70
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels) (For Switch Board Looping)
Supply and fixing of following way three pole and neutral, sheet steel,
MCB distribution, 415 V on surface / recess, complete with tinned copper
bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for
the MCB knobs detachable gland plate, interconnections, phosphatized
and powder painted including earthing etc. as required wih necessary
MCB , RCCB / ISOLATORS as required.Note for MCB- There should be
colour indication for tripping On ,Off & Trip/There should be mid trip
position for toggles for electrical fault conditions.
Supply, fixing, erecting, connecting and commissioning of indoor type
dust and vermin proof, sheet steel clad ready made, double door
horizontal type powder coated wall mounted 4 way TPN Distribution
a) Boards For LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Nos. 2 11941.60 23883.20
Supply complete with bottom detachable plate for interconnections etc
as below.Incommer 1 No-40A FP MCB (10KA) Outgoings-10A SP
MCB 10KA-12Nos.(Make-L&T/ Schneider/Legrand)
Laying of one number of PVC insulated and PVC seathed / XLPE power
12 cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as Rmt 350 326.86 114401.00
required.(Make-polycab/RR Kable/Rhino cable)
END TERMINATION
Supplying and making end termination with brass compression gland
and aluminum lugs for following size of PVC insulated and PVC
sheathed / XLPE aluminum cable of 1.1 KV as required.
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI
marked including accessories and providing masonary with cover plate
having loccking arrangement and watering pipe etc with charcoal and
salt as required.
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5
16 meter below ground level as strip earth electrode including soldering etc. Rmt 80 569.94 45595.20
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on
surface or in recess for connection etc as required.
Providing and fixing 8 SWG CU wire on surface or in recess for loop
earthing as required.
19 Lightning Arrester.
Supply & fixing of lightning arrester of size 2.6' length made of
(a) 0.5"diameter copper rod, over which 5nos 5" length pointed copper rods Nos 10 2950.00 29500.00
of 0.3" diameter with suitable size of nuts and bolts.
(b) Supply & fixing of GI flat of 25mmx5mm size. kg 200 608.88 121776.00
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI
marked including accessories and providing masonary with cover plate
having loccking arrangement and watering pipe etc with charcoal and
salt as required.
Supply, Installation, Testing and Commissioning of pre-wired fluorescent
fiiting / compact fluorescent fitting /LED fitting of all sizes complete with
all accessories and lamp etc. directly on ceiling /wall or recessed in false
ceiling , including connection with 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor and earthing as required.Make-
Bajaj/philips/wipro/JAQUAR.
Ceiling mounted indoor type batten type LED Luminaire with LED
Lamp Similar to JAQUAR Cat No. LGLZPCX022XW or equivalent.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Ceiling/ Wall mounted type BULK HEAD Luminaire with Similar to
JAQUAR Cat No.LBLK02X010XW or equivalent.
Supply & fixing of 3W LED STEP LIGHT similar to JAQUAR CAT NO-
LFTL01S003XW/Equivalant With all accessories.
SAFETY EQUIPMENTS
Supply and installation of Rubber Mats 12mm thick of size 2000mm x
1000mm x 12 mm thick Electrical tested with test certificate.
Supply and fixing of fire buckets with angular fabricated stand to fix 4
24 buckets in each stand for Electrical fire protection as per standards of sets 4 1770.00 7080.00
Electrical Inspectorate.
Supply and fixing of Co2 fire extinguisher with mounting clamps with
pressure test certificate .
Supply and fixing of shock treatement charts duly laminated along with
26 separate colour single line diagram laminated, to be fixed in Electrical sets 3 767.00 2301.00
control panel room.
Supply and fixing of first aid box with medicines complete with medicine
with three years expiry date to be fixed in Electrical control panel room.
INTERNAL WIRING.
Recessed wiring to light point / first light of group control/ call bell point/
exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked in 20 mm dia non-
metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked
and ceiling rose ISI marked mounted on G.I modular box with face plate
& cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single
core multistrand copper conductor as earth wire including all accesories
and connection as per direction of Engineer in Charge. (Make of wire
Finolex /Polycab/ Anchor / Havels) (Make of modular
box,cover,switch & socket-Legrand Myrios/schneider opale)
Recessed wiring to secondary light point looped from primary light point
with 1.5sqmm FRLSH PVC insulated single core multistrand copper
conductor of ISI marked with 20mm dia non-metallic PVC conduit with
1.5sqmm FRLSH PVC insulated single core multistrand copper
conductor for running earth including 3 plate ISI marked Ceiling rose
with all accessories & connection as per direction of Engineer-in-charge.
(Make of wire Finolex /Polycab/ Anchor / Havels) Average Length: 3
Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked with 20mm dia
non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped
3 type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC Nos. 55 1648.46 90665.30
insulated single core multistrand copper conductor for running earth
including all accessories & connection as per direction of Engineer in
charge. (Make of wire Finolex /Polycab/ Anchor / Havels) Group B
Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC
insulated single core multistrand copper conductor of ISI marked in 20
mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way
switch ISI marked and ceiling rose ISI marked mounted on G.I modular
box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH
PVC insulated single core multistrand copper conductor as earth wire
including all accesories and connection as per direction of Engineer-in-
charge. (Make of wire Finolex /Polycab/ Anchor / Havels) Group C
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in
type modular switch ISI marked mounted on G.I moular box with face
plate & cover of suitable size including all accesories and connection on
same switch board as per direction of Engineer-in-charge.
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH
PVC insulated single core multistrand copper conductor of ISI marked in
20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type
switch ISI marked mounted on G.I moular box with face plate & cover of
suitable size , with 1.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire including all accesories and
connection on separate board as per direction of Engineer-in-
charge.(Make of wire Finolex /Polycab/ Anchor / Havels) Group C
Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos
6Amp, 250 V clip in type switch ISI marked mounted on single G.I
7 moular box with face plate & cover of suitable size including all Nos. 30 1096.22 32886.60
accesories and connection on separate board as per direction of
Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip
in type switch ISI marked mounted on G.I moular box with face plate &
8 cover of suitable size including all accesories and connection as per Nos. 15 928.66 13929.90
direction of Engineer-in-charge. 25Nos for Stage Light,3Nos For
Recessed wiring for A.C/ Power socket outlet with industrial type
socket outlet, plug top and metal chained cover in sheet steel enclosure
,20A/32A SP MCB including all accesories and connection as per
direction of Engineer-in-charge.
Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH
PVC insulated single core multistrand copper conductor of ISI marked
with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular
10 Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core Nos. 50 1201.24 60062.00
multistrand copper conductor for running earth including all accessories
& connection as per direction of Engineer in charge. (Make of wire
Finolex /Polycab/ Anchor / Havels) Group B
11 Call bell point Nos. 10 1,393.58 13935.80
Recessed wiring for 3 x 6 amp socket outlet controlled by 2 nos
6Amp, 250 V clip in type switch ISI marked mounted on single G.I
12 moular box with face plate & cover of suitable size including all Nos. 10 1249.62 12496.20
accesories and connection on separate board as per direction of
Engineer-in-charge.
Recessed wiring to submain in 4 x 16 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 50 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 2 x 10 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 2 x 6 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 4 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm
18 thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core Mtrs 500 160.98 80487.80
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels) (For Switch Board Looping)
Supply and fixing of following way three pole and neutral, sheet steel,
MCB distribution, 415 V on surface / recess, complete with tinned copper
bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for
the MCB knobs detachable gland plate, interconnections, phosphatized
and powder painted including earthing etc. as required wih necessary
MCB , RCCB / ISOLATORS as required.Note for MCB- There should be
colour indication for tripping On ,Off & Trip/There should be mid trip
position for toggles for electrical fault conditions.
Supply, fixing, erecting, connecting and commissioning of indoor type
dust and vermin proof, sheet steel clad ready made, double door
horizontal type powder coated wall mounted 4 way TPN Distribution
a) Boards For PDB suitable for 440 V, three phase, 4 wire 50 Hz AC Nos. 2 11941.60 23883.20
Supply complete with bottom detachable plate for interconnections etc
as below.Incommer 1 No-63A FP MCB (10KA) Outgoings-10/20A SP
MCB 10KA-12Nos.(Make-L&T/ Schneider/Legrand)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supply, fixing, erecting, connecting and commissioning of indoor type
dust and vermin proof, sheet steel clad ready made, double door
horizontal type powder coated wall mounted 4 way TPN Distribution
b) Boards For LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Nos. 2 11941.60 23883.20
Supply complete with bottom detachable plate for interconnections etc
as below.Incommer 1 No-40A FP MCB (10KA) Outgoings-10A SP
MCB 10KA-12Nos.(Make-L&T/ Schneider/Legrand)
Laying of one number of PVC insulated and PVC seathed / XLPE power
cable of 1.1 KV grade of 3.5core 240 sq.mm direct in ground including
excavation , sand cushining protective covering and refilling the trench
etc. as required.(Make-polycab/RR Kable/Rhino cable)
Laying of one number of PVC insulated and PVC seathed / XLPE power
cable of 1.1 KV grade of 3.5core 150 sq.mm direct in ground including
excavation , sand cushining protective covering and refilling the trench
etc. as required.(Make-polycab/RR Kable/Rhino cable)
Laying of one number of PVC insulated and PVC seathed / XLPE power
cable of 1.1 KV grade of 95 3.5core sq.mm direct in ground including
excavation , sand cushining protective covering and refilling the trench
etc. as required.(Make-polycab/RR Kable/Rhino cable)
Laying of one number of PVC insulated and PVC seathed / XLPE power
cable of 1.1 KV grade of 3.5core 50 sq.mm direct in ground including
excavation , sand cushining protective covering and refilling the trench
etc. as required.(Make-polycab/RR Kable/Rhino cable)
Laying of one number of PVC insulated and PVC seathed / XLPE power
cable of 1.1 KV grade of 3.5core 35 sq.mm direct in ground including
excavation , sand cushining protective covering and refilling the trench
etc. as required.(Make-polycab/RR Kable/Rhino cable)
Laying of one number of PVC insulated and PVC seathed / XLPE power
25 cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as Rmt 200 326.86 65372.00
required.(Make-polycab/RR Kable/Rhino cable)
END TERMINATION
Supplying and making end termination with brass compression gland
and aluminum lugs for following size of PVC insulated and PVC
sheathed / XLPE aluminum cable of 1.1 KV as required.
Supply, installation,testing & commissioning of floor mounting front
operated front access extensible type cubicle panel totally enclosed, dust
and vermin proof with IP-42 /55 protection with hinged and lockabale
doors.CRCA sheets including interconnections,tinned copper crimping
lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4
wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical
for 1 sec at 415 V complete as per specifications, as required and as
below : All switchboards shall have provision for entry of cables from the
bottom as required. All live accessible parts shall be shrouded and all
equipment shall be finger touch proof. The bus bars shall be insulated
with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports
shall be used with Indication lamp, C.T , Digital Voltmeter, Digital
Ammeter and control fuse etc. complete.MAKE- Legrand / Schneider/
MAIN PANEL with 400A 4P MCCB 50KA -1 No as incomer, 63A 4P
MCB 10KA.-8Nos(for 4Nos Area Lighting Feeder pilar, 2Nos For 2nos
Open Gallery and 2 Nos Spare)100A 4P MCCB 25KA -3Nos (2Nos for 2
32 Gallery 1Nos Spare) & 250A 4P Change over switch-1Nos, 80A 4P set 1 373007.44 373007.44
MCB 10KA -6Nos, (for 4Nos Mast Light Feeder pilar and 2 Nos
Spare)with E.C Busbars with 4nos 65KA VSD along with 4nos 32A SP
Gallery Floor Panel with 100A 4P MCCB (25KA) as Incomer ,
33 Outgoings-63A 4P MCB 10KA-3Nos,63A 4p Changeover switch set 1 96938.18 96938.18
1Nos,40A 4P MCB 10KA -3Nos with E.C Busbars.
SUB FEEDER PILLAR with 63A 4P MCB (10KA) as Incomer ,
34 Outgoings-20 A DP MCB 10KA-6Nos, with E.C Busbars. (For Area set 0 25126.92 0.00
Lighting Feeder Pilar)
PUMP Panel Board with 63A 4P MCB (10KA) as Incomer , Outgoings-
35 32A 4P MAB 10KA-2Nos, 20 A DP MCB 10KA-3Nos, with E.C set 1 26804.88 26804.88
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI
marked including accessories and providing masonary with cover plate
having loccking arrangement and watering pipe etc with charcoal and
salt as required.
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5
37 meter below ground level as strip earth electrode including soldering etc. Rmt 100 569.94 56994.00
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on
surface or in recess for connection etc as required.
Providing and fixing 8 SWG CU wire on surface or in recess for loop
earthing as required.
40 Lightning Arrester.
Supply & fixing of lightning arrester of size 2.6' length made of
(a) 0.5"diameter copper rod, over which 5nos 5" length pointed copper rods Nos 10 2950.00 29500.00
of 0.3" diameter with suitable size of nuts and bolts.
(b) Supply & fixing of GI flat of 25mmx5mm size. kg 150 608.88 91332.00
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI
marked including accessories and providing masonary with cover plate
having loccking arrangement and watering pipe etc with charcoal and
salt as required.
Supply, Installation, Testing and Commissioning of pre-wired fluorescent
fiiting / compact fluorescent fitting /LED fitting of all sizes complete with
all accessories and lamp etc. directly on ceiling /wall or recessed in false
ceiling , including connection with 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor and earthing as required.Make-
Bajaj/philips/wipro/JAQUAR.
Ceiling mounted indoor type batten type LED Luminaire with LED
Lamp Similar to JAQUAR Cat No. LGLZPCX022XW or equivalent.
Ceiling/ Wall mounted type BULK HEAD Luminaire with Similar to
JAQUAR Cat No.LBLK02X010XW or equivalent.
Supply, Installation, testing and commissioning of 10W Mirror Light
Similar to JAQUAR Cat no-LGLZ01X010XW/Equivalent.
Supply, Installation, Testing and Commissioning of ceiling fan 1200mm
sweep, including wiring the down rods of standard length (upto 30 cm)
with 1.5 sq.mm FR PVC insulated single core multiatrand copper
conductor etc. as required.
Supply, Installation, testing and commissioning of exhaust fan of 300 mm
sweep 900 rpm in the existing opening, including making the hole to suit
the size of the above fan, making good the damage complete,
connection, etc as required.
Supply & fixing of 18W LED Down Light (S) similat to Jaquar Cat no-
LNRO02R018SC/Equivalant With all accessories.
Supply & fixing of LED 36w 2'x2' Surface Mounted Light similar to jaquar
cat no-LSVR01S036SN / Equivalent. etc as required .
Supply & fixing of 3W LED STEP LIGHT similar to JAQUAR CAT NO-
LFTL01S003XW/Equivalant With all accessories.
Supply & fixing of 5W LED Wall Decorative LIGHT similar to JAQUAR
CAT NO-5386LL5H.INX /Equivalant With all accessories.
SAFETY EQUIPMENTS
Supply and installation of Rubber Mats 12mm thick of size 2000mm x
1000mm x 12 mm thick Electrical tested with test certificate.
Supply and fixing of fire buckets with angular fabricated stand to fix 4
51 buckets in each stand for Electrical fire protection as per standards of sets 4 1770.00 7080.00
Electrical Inspectorate.
Supply and fixing of Co2 fire extinguisher with mounting clamps with
pressure test certificate .
Supply and fixing of shock treatement charts duly laminated along with
53 separate colour single line diagram laminated, to be fixed in Electrical sets 3 767.00 2301.00
control panel room.
Supply and fixing of first aid box with medicines complete with medicine
with three years expiry date to be fixed in Electrical control panel room.
C PUBLIC TOILET
INTERNAL WIRING.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Recessed wiring to light point / first light of group control/ call bell point/
exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked in 20 mm dia non-
metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked
and ceiling rose ISI marked mounted on G.I modular box with face plate
& cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single
core multistrand copper conductor as earth wire including all accesories
and connection as per direction of Engineer in Charge. (Make of wire
Finolex /Polycab/ Anchor / Havels) (Make of modular
box,cover,switch & socket-Legrand Myrios/schneider opale)
Recessed wiring to secondary light point looped from primary light point
with 1.5sqmm FRLSH PVC insulated single core multistrand copper
conductor of ISI marked with 20mm dia non-metallic PVC conduit with
1.5sqmm FRLSH PVC insulated single core multistrand copper
conductor for running earth including 3 plate ISI marked Ceiling rose
with all accessories & connection as per direction of Engineer-in-charge.
(Make of wire Finolex /Polycab/ Anchor / Havels) Average Length: 3
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in
type modular switch ISI marked mounted on G.I moular box with face
plate & cover of suitable size including all accesories and connection on
same switch board as per direction of Engineer-in-charge.
Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip
in type switch ISI marked mounted on G.I moular box with face plate &
4 cover of suitable size including all accesories and connection as per Nos. 6 928.66 5571.96
direction of Engineer-in-charge. 25Nos for Stage Light,3Nos For
Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH
PVC insulated single core multistrand copper conductor of ISI marked
with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular
5 Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core Nos. 24 1201.24 28829.76
multistrand copper conductor for running earth including all accessories
& connection as per direction of Engineer in charge. (Make of wire
Finolex /Polycab/ Anchor / Havels) Group B
Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 4 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels)
Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated
single core multistrand copper conductor of ISI marked confirming to IS-
694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm
9 thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core Mtrs 40 160.98 6439.02
multistrand copper conductor as earth wire as equired. (Make of wire
Finolex /Polycab/ Anchor / Havels) (For Switch Board Looping)
Supply and fixing of following way three pole and neutral, sheet steel,
MCB distribution, 415 V on surface / recess, complete with tinned copper
bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for
the MCB knobs detachable gland plate, interconnections, phosphatized
and powder painted including earthing etc. as required wih necessary
MCB , RCCB / ISOLATORS as required.Note for MCB- There should be
colour indication for tripping On ,Off & Trip/There should be mid trip
position for toggles for electrical fault conditions.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supply, fixing, erecting, connecting and commissioning of indoor type
dust and vermin proof, sheet steel clad ready made, double door
horizontal type powder coated wall mounted 8 way SPN Distribution
a) Boards For LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Nos. 2 11742.18 23484.36
Supply complete with bottom detachable plate for interconnections etc
as below.Incommer 1 No-40A DP MCB (10KA) Outgoings-10 A SP
MCB 10KA- 6 Nos,(Make-L&T/ Schneider/Legrand) For LDB .
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI
marked including accessories and providing masonary with cover plate
having loccking arrangement and watering pipe etc with charcoal and
salt as required.
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5
12 meter below ground level as strip earth electrode including soldering etc. Rmt 20 569.94 11398.80
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on
surface or in recess for connection etc as required.
Providing and fixing 8 SWG CU wire on surface or in recess for loop
earthing as required.
Supply, Installation, Testing and Commissioning of pre-wired fluorescent
fiiting / compact fluorescent fitting /LED fitting of all sizes complete with
all accessories and lamp etc. directly on ceiling /wall or recessed in false
ceiling , including connection with 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor and earthing as required.Make-
Bajaj/philips/wipro/JAQUAR.
Ceiling/ Wall mounted type BULK HEAD Luminaire with Similar to
JAQUAR Cat No.LBLK02X010XW or equivalent.
Supply, Installation, testing and commissioning of 10W Mirror Light
Similar to JAQUAR Cat no-LGLZ01X010XW/Equivalent.
Supply, Installation, testing and commissioning of exhaust fan of 300 mm
sweep 900 rpm in the existing opening, including making the hole to suit
the size of the above fan, making good the damage complete,
connection, etc as required.
Supply & fixing of 18W LED Down Light (S) similat to Jaquar Cat no-
LNRO02R018SC/Equivalant With all accessories.
D EXTERNAL ELECTRICAL
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single
core multistrand copper conductor of ISI marked confirming to IS-
1 694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm Mtrs 150 177.42 26613.72
thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand
copper conductor as earth wire as equired.
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor of ISI marked confirming to IS-
2 694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm Mtrs 200 160.98 32195.12
thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand
copper conductor as earth wire as equired.
Laying of one number of PVC insulated and PVC seathed / XLPE power
cable of 1.1 KV grade of 25 sq.mm direct in ground including
excavation , sand cushining protective covering and refilling the trench
etc. as required.
Laying of one number of PVC insulated and PVC seathed / XLPE power
4 cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as Rmt 200 326.86 65372.00
Laying of one number of PVC insulated and PVC seathed / XLPE power
cable of 1.1 KV grade of 3Core 6 sq.mm direct in ground in the same
trench in one tier horizontal formation including excavation , sand
cushining protective covering and refilling the trench etc. as required.
END TERMINATION
Supplying and making end termination with brass compression gland
and aluminum lugs for following size of PVC insulated and PVC
sheathed / XLPE aluminum cable of 1.1 KV as required.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
Supply, installation & testing of L.T. outdoor floor mounted type
distribution boards made out of 2 mm thick CR sheet metal cubicle, duly
acid treated for derusting, primered and painted with 2 coats of enamel
paint of approved shade; dust, damp & vermin proved; having hinged
door and compartmental arrangement for each equipment & busbar
chamber on the top of the panel running horizontally; having provision
for cable/ conduit entry, earthing studs as per specification mentioned
below duly factory wired conforming to the relevant ISS and as per
special conditions of contract making good the damages caused
complete as per the direction of Engineer-in-charge.
SUB FEEDER PILLAR with 63A 4P MCB (10KA) as Incomer ,
8 Outgoings-20 A DP MCB 10KA-6Nos, with E.C Busbars. (For Area set 4 25126.92 100507.68
Lighting Feeder Pilar)
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI
marked including accessories and providing masonary with cover plate
having loccking arrangement and watering pipe etc with charcoal and
salt as required.
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5
10 meter below ground level as strip earth electrode including soldering etc. Rmt 100 569.94 56994.00
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on
surface or in recess for connection etc as required.
Providing and fixing 8 SWG CU wire on surface or in recess for loop
earthing as required.
Supply & fixing of LED Bollards light Similar to JAQUAR Cat no-
LBLD03R108XW LED with all accessories.
Supply & fixing of LED Spike light for Monuments Decoration Similar to
JAQUAR Cat no-LSPK05R112SW with all accessories.
Supply & fixing of LED Wall Decorative Light Similar to JAQUAR Cat no-
5385LL5H.INX with all accessories.
Supply & fixing of LED Under water Fountain Light Similar to JAQUAR
Cat no-LSPK68R103SW with all accessories.
Supply & fixing of LED Gate Light Similar to JAQUAR Cat no-
LGTP02X006XW with all accessories.
Supply & fixing of LED POST TOP light Similar to JAQUAR
340.PE8.NGG with all accessories.
Supply & fixing of LED outdoor type Strip light 5mtr long roll similar to
jaquar cat no-LSTP04X008XM and all accessories.
Supply & fixing of DECORATIVE LED POLE light Similar to HALONIX
20 Cat no-HLOSL-04-40-CWL with Decorative Ornamental 4mtr pole CAT Nos 12 32550.30 390603.60
NO-HLOP-S46-3.5M-114/76 and all accessories.
E TRANSFORMER & DG WORKS
(A) 11KV OH Line & SS with 500KVA Transformer
1 Supply of all materials, labour and construction of 11-KV overhead line
from tapping point of CESU with 10.0 metre long 200mmx100mm Joist
pole ( 200 ISMB) , 55-sqmm AAAC conductor complete with required
insulators, cross arms, stays, struts, guarding complete as per site
requirement and direction of Engineer-in-charge.
SUB STATION DP WITH 500KVA Transformer
2 Supply, installation testing and Commissioning of 11/0.4KV Sub station
DP structure made out of 10.0 metre long ISMB 200 joist pole with 400 x
400 x 6mm base plate & one set of 11-KV 400 Amp horizontal gang
operated A.B. switch ,11KV 400 Amp horn gap fuse ,3nos. 12KV
lightning arrestors etc complete with associated structural members
made out of fabricated m.s. channels, angles etc as per the approved
drawing including cost of clamp, nut bolts, painting with 2 coats of red
oxide primer & 2 coats of aluminium paint including excavation of pole pit
in all kinds of soil, PCC base padding, back filling of the pit with 1:3:6
PCC, painting with two coats of redoxide primer & two coats of
aluminium paint, construction of brick masonary couping, fixing of danger
board etc complete as required including fencing around the DP Sructure
with M.S grille
3 Supply, delivery, of energy efficient low loss 500-KVA, 11/0.415 KV
Copper wound ONAN Dyn-11 transformer complete including first filling Set 1.0 10,91,500.00 1091500.00
of transformer oil.
4 Installation, testing and commissioning of energy efficient low loss 500-
KVA, 11/0.415 KV Copper wound ONAN Dyn-11 transformer complete L.S 1.0 59,000.00 59000.00
including first filling of transformer oil.
5 Supply, laying, installation, testing and commissioning of 3Core 95sqmm
11KV XLPE ( E) cable
6 Supply of material , installation, testing and commissioning of 3Core
95sqmm 11KV XLPE outdoor jointing kit
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
7 Substation yard devlopment including barbared wire fencing,T/R plingth
,M.S grille,& spreading of Hard granite metal,sand etc as required. L.S 1.0 70,800.00 70800.00
(B) 500-KVA Silent D.G. SET
8 Supply & delivery of 500-KVA silent DG sets along with engine-
alternator, Control panel containing 1 No 850-A, 4P MCCB & required
protections and metering arrangement (in tamper proof compartment
with locking arrangement) with 5-A digital KWH meter & CTs for DG set,
etc as required, With AMF Panel , acoustic enclosure, diesel tank,
residential silencer and complete as required as per the technical
specification and as per direction of Engineer-in-charge.
9 Installation, testing and commissioning of 500-KVA silent DG sets along
with engine-alternator, Control panel containing 1 No 850-A, 4P MCCB &
required protections and metering arrangement (in tamper proof
compartment with locking arrangement) with 5-A digital KWH meter &
CTs for DG set, etc as required , acoustic enclosure, diesel tank,
residential silencer and complete as required as per the technical
specification and as per direction of Engineer-in-charge.
10 DG Set Foundation including barbared wire fencing / Roof shade as
Supply, installation and testing of L.T. outdoor/ indoor floor mounted type
distribution boards made out of 2mm thick CR sheet metal cubicle, duly
acid treated for derusting, primered and painted with 2 coats of enamel
paint of approved shade; dust, damp & vermin proved; having hinged
door and compartmental arrangement for each equipment & busbar
chamber on the top of the panel running horizontally; having provision
for cable/ conduit entry, earthing studs as per specification mentioned
below duly factory wired conforming to the relevant ISS and as per
special conditions of contract making good the damages caused
complete as per the direction of Engineer-in-charge.
Outdoor Sub Station Panel
11 Panel having 850A 3P MCCB (36KA) -1 No as incomer with suitable
arrangement for cable termination of complete duly factory wired as per Set 1.0 1,03,250.00 103250.00
TP Meter Box of 250 KVA DG set
12 1 No 3 phase 4 wire 5amp CT operated digital KWH meter in tamper
proof enclosure with locking and sealing arrangement along with
suitable bus bar arrangement,for mounting of C.T's & 850/5-A CTs,
cable termination arrangement complete as required
13 Supply, laying & testing of following sizes XLPE insulated, PVC
sheathed, strip/ wire armoured aluminium conductor power cable of 1100
volt grade laid directly in ground/ on surface of wall/ column/ existing
RCC/ stone ware/ through G.I. pipe/ hume pipe as the case may be
including excavation of earth in all kinds of soil & rock, sand cushioning,
protective covering, refilling the trench with sand and brick covering
but excluding the cost of G. I. pipe/ hume pipe and cable end termination
complete with making good the damages caused as required and as per
direction of Engineer-in-charge.
Laying of one number of PVC insulated and PVC seathed / XLPE power
cable of 1.1 KV grade of 3.5core 240 sq.mm direct in ground including
excavation , sand cushining protective covering and refilling the trench
etc. as required.(Make-polycab/RR Kable/Rhino cable)
14 Supply of materials and end termination of following cables including
supply of single compression brass cable glands, cable sockets etc
complete as required and as per direction of Engineer-in-charge.
15 Construction of Man hole chamber for cable pulling / crossing of size
[600mm(W) x 600mm(D)] complete including with suitable size of Hume
pipe, base foundation with C.C 1:3:6, 250mm brick walls, filling the
inside area with sand, removable RCC slab for chambers with C.C 1:2:4
on the top, wall and top plastering etc complete as required
16 Providing , laying and fixing of of 100mm dia PVC Pipe (8kg/psi) along
with G.I /PVC accessories in ground for road crossing including Mtrs 20.0 459.02 9180.40
trenching (450mm) and refilling as required.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
17 Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI
marked including accessories and providing masonary with cover plate
having loccking arrangement and watering pipe etc with charcoal and
salt as required.
18 Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5
meter below ground level as strip earth electrode including soldering etc. Rmt 25.0 559.32 13983.00
19 Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on
surface or in recess for connection etc as required.
20 Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including
accessories and providing masonary enclosure with cover plate having
locking arrangment and watering pipe etc with charcoal and salt as
21 Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5
meter below ground level as strip earth electrode including soldering etc. Rmt 50.0 89.68 4484.00
22 Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on
surface or in recess for connection etc as required.
23 Providing and fixing 6 SWG G.I. wire on surface or in recess for loop
earthing as required.
24 Supply of material & laying under ground/ floor/ wall including making
end termination and testing of following size of Cu/G.I. wire for loop
earthing of equipments, switch boards & panels as required comlete as
per direction of Engineer-in-charge.
(a) 8SWG HDBC Wire on surface or in recess for loop earthing as required.
(b) 8 swg G.I wire on surface or in recess for loop earthing as required.
F. FIRE SAFETY SYSTEM :
1 Supplying, installation, testing and commissioning of electric driven
terrace pump 900 LPM,35 MTR HEAD suitable for automatic
operation and consisting of following, complete in all respects, as
required: (Terrace Pump) Horizontal type, multistage, centrifugal,
split casing pump of cast iron body & bronze impeller with stainless
steel shaft, mechanical confirming to IS : 1520,
Suitable HP squirell cage induction motor TEFC type suitable for
operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55
class of protection for enclosure, horiziontal foot mounted type
with Class-'F' insulation, conforming to IS-325 , M.S.fabricated common Nos 1.00 89493.56 89493.56
base plate, coupling, coupling guard, foundation bolts etc.as required.
Suitable cement concrete foundation duly plastered and with anti
vibration pads.
2 Providing, installation, testing and commissioning of non- return
valve of 100 mm dia confirming to IS: 5312 complete with rubber gasket, Nos 1.00 14797.20 14797.20
MS bolts, nuts, washers etc.as required
3 Supply & Installation of Electrical Control panel for Terrace
Booster Pump auto system.
4 Supply & Installation of Pressure guage 100mm dial type with
5 Supply & Installation of Pressure Switch with GI Fittings Nos 1.00 2655.00 2655.00
6 Supply & Installation of CI Ball Valve 15mm dia Nos 2.00 1298.00 2596.00
7 Supply & Installation of Over head tank connection material
like-UPVC Pipe, Elbow, Socket, MTA.FTA, Union,Ball Valve, all size- Lot 1.00 11800.00 11800.00
8 Supply & Laying of Electrical Cableing for your power supply to pump
panel cableing Make- Policab (10 sqarmm x 4core ALUM armode
cable & 4 Sqarmm x 4 core copper flexi
9 FIRE HYDRANT & DOWN COMMER
Providing all materials, labour, T&P for laying of following dia
M.S. heavy class pipes conforming to IS:1239/IS:3589 with ISI
mark & required sizes of fitting like off set, bend, tee, reducer
flange & flange joints etc. as per site condition including gas
cutting by oxygen and acetelene gas flame, fitting and setting as
per required size wherever necessary, jointing the pipes by
electric welding confirming to IS specification and electrodes
confirming to IS specification after 'V' grove cutting. Aligning the pipes
inside the trenches including necessary excavation of earth work of
required width & depth in all kinds of soil /rock and back filling or
supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers
(using anchor fasteners) or angle iron, G.I. pipe sleeve of suitable
higher size shall be provided wherever the pipes are crossing the
walls/floors and sealing the sleeves with glass wool in between & fire
sealent compound at either end all as per the approved specification
including cutting holes and chases in brick/RCC wall/roof/chajja and
making good the same to original condition.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
All hangers, clamps, brackets etc. shall be of galvanized iron unless
specified otherwise and then supply of the same shall also be
included. Painting 2 (two) or more coats with synthetic enamel
paint of Post office red shade over a coat of primer for above ground
level & painting 2 (two) or more coats with anticorrosive epoxy
paint for below ground level. Prior to application of primer the
surface should be cleaned for any dirt, rusts, rough substance etc.
Including painting of legends both direction arrow as per the
approved specification including testing & commissioning the
system.The cost inclusive of hire and running charges of welding
generator set & all taxes, duties, transportation, hire & running charges
of machineries, POL, to & fro charges with all consumables for all
floors etc. all complete as per pecification & direction of EIC.
(I) 100mm dia (Heavy class) as per IS-1239 Part-I/2004 Rmt 72.00 2478.00 178416.00
(II) 80mm dia (Heavy class) as per IS-1239(Part-I)/2004 Rmt 7.00 1711.00 11977.00
(II) 25mm dia (Heavy class) as per IS-1239(Part-I)/2004 Rmt 7.00 495.60 3469.20
10 Providing, fitting & fixing of Stainless Steel fire hydrant landing
valve with 80mm NB flanged inlet (Table-E Flange), SS spindle
controlled 63mm dia female instantaneous outlet type. SS coupling,
blank cap, chain, twist release type lug & all accessories Conforming
to IS-5290 with ISI mark. Including flange joint & tapping from wet
rise & testing and commissioning the system for all floors etc. all
complete as per approved specification & direction of EIC.
Single Landing Valve (oblique type) Nos 3.00 7762.04 23286.12
11 Providing, fitting and fixing of 63 mm dia stainless steel
instantaneous male inlet pattern branch short pipe
conforming to IS:903 with ISI mark suitable for
interconnection to hose pipe coupling including testing &
commissioning the system for all floors etc. all complete as per
approved specification & direction of EIC.
12 Providing, fitting and fixing of MS/ GI partly glazed
single/double hung lockable shutter fabricated from MS/GI section
as required with 5mm thick glass for fire station complete
including stove enamelled painting of door and frame and words
"Fire Hydrant" written on glass, suitable to accommodate 2 (two) RRL
,15m long 63 mm dia hose (RRL),1(One)-branch pipe including Nos 3.00 4130.00 12390.00
suitably mounted on a raised masonry/ vertical MS
platform of size 0.6mx0.5mx0.25m (external type with rain
cap) including testing & commissioning the system for all floors etc.
all complete as per approved specification & direction of EIC.
13 Providing, fitting & fixing of Non-percolating flexible hose (RRL type-
'A' with EPDM Lined) confirming to IS:636 with ISI mark (63 mm dia x
15 M long) complete with instantaneous type stainless steel male and
female couplings confirming to IS:903 with ISI mark wounded & riveted
to hose pipe with 18 SWG stainless steel wire including testing &
commissioning the system for all floors etc. all complete as per
approved specification & direction of EIC.
14 Providing, fitting and fixing of first aid fire hose reel wall mounting
swinging type fitted with 20mm dia 30.00 m long high pressure
(10Kg/cm2) themo plastic hose tube conforming to IS: 12585
with ISI mark Type II with 5mm outlet stainless steel/ Brass
nozzle with shut off valve confirming to IS 884-1969 with ISI
mark including testing & commissioning the system for all floors etc.
all complete all complete as per apporved specification & direction of
15 Providing, fitting & fixing of following size Ductile Iron double flanged
slim seal wafer type Butterfly valves with EPDM rubber lined with
lever operated as per IS-13095 with ISI mark of pressure ratting
PN-1.60 including fixing the same with supply of required jointing
materials like rubber insertion, MS nuts & bolts, paint etc. and testing the
joints with required water pressure for all floors etc. all complete
as per specification & direction of E.I.C.
16 Supply of Ball Valve 25mm dia Make-Kartar Nos 3.00 1416.00 4248.00
17 Providing, fitting and fixing of 25 MM DIA D.I. single Air relief valve with
stop cock confirming to IS:14845/2000 with ISI mark for water works
purpose including fixing the same with hydrant riser including testing & Nos 1.00 2950.00 2950.00
commissioning the system etc. all complete as per approved
specification & direction of EIC.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
18 Providing, fitting & fixing of GM fire brigade connection consisting
of 63 mm dia 2 WAY instantaneous type male couplings with built-
in check valves, 100mm dia flanged outlet complete with bolts,
nuts and rubber insertions confirming to IS:904 with ISI mark Nos 1.00 12059.60 12059.60
including testing & commissioning the system etc. all
complete as per apporoved specification & direction of EIC.
AUTOMATIC FIRE ALARMING AND DETECTION SYSTEM
19 Supplying installation testing and commissioning of
Microprocessor based Addressable Fire Alarm Control Panel (2 loop )
suitable for serving the followingg detectors & Devices in maximum
with LCD display all complete) 2 Nos 12 Volt 40 Ah SMF battery,
Battery backup and also provision for 2 Nos potential free Normally
open contact per loop to be used for interlocking of AHUs in the event of
fire for all floors etc. as per direction of Engineer-incharge.
20 Supplying installation testing and commissioning of
Addressable Photoelectric type Smoke Detector, complete with base
and accessories for Above False Ceiling for all floors etc. as per
direction of Engineer-in-charge.
21 Supplying installation testing and commissioning of
Addressable Manual Pull Station, complete with addressable mini input
module, back box and accessories for all floors etc. as per direction of
Engineer-in-charge.
22 Supplying installation testing and commissioning of Audio Visual
Strobe, complete with mounting box and accessories and module if
require for all floors etc. as per direction of Engineer-incharge.
23 Providing & fixing of Isolator Module with Base complete for all floors etc.
as per the direction of Engineer-in-charge.
24 Providing and laying of a pair of 1.5 sq.mm single core flexible
copper cable (2X 1.5) to be laid within Existing PVC conduit of suitable
size to be erected above the wall or concealed, as the case may Rmt 950.00 206.50 196175.00
be, with all accessories for all floors etc. as per direction of Engineer-
FIRE EXTINGUISHERS
25 Supplying installation testing and commissioning of ABC type fire
extinguishers of 6 kg capacity confirming to IS:14609 including cost
of all material & labour for all floors & service building etc. all complete.
26 Supplying, installation, testing and commissioning of CO2 type Fire
Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI
marked seamless cylinder confirming to IS: 7285, fitted with ISI
marked controlled valve confirming to IS: 3224, high pressure 1mtr Nos 2.00 8850.00 17700.00
discharge hose & horn complete with initial gas charged with carrying
handle & wall mounting bracket for all floors & service building etc. as
per direction of Engineer-in-charge.
27 Supply & Installation Fire Bucket 9 Ltr Capacity ( 4 nos Bucket
with one MS Stand)
a Supply & Installaton of S 400T High Fidelity sound for music. Speaker
System consists of woofer & dome tweeter. Elegant plastic cabinet in
white colour. Ideal for background music in offices, banks, restaurants,
showrooms etc. High fidelity 2- Way, 100V multi purpose PA
speaker system. 100V Power taps of 16W, . Power taps can be
selected through rotary switch. Facility to use as 8 ohms Low
Impedance Speaker available. Weather Resistant Speaker. Movable
mounting bracket supplied, can be mounted in vertical or horizontal
b Supply & Installation of High Power PA Amplifier,his is a rugged
and highly reliable product, ideally suited for a wide variety of
music and public address applications.6 Mic & 2 Aux Inputs. Built-in
MP3 player with LCD display, remote control, for USB, SD/MMC
cards.Preamplifier and Line Output for connecting to a Booster
Amplifier and for recording the programme. Line Input for connecting
the output from any external mixer or permitting SSA-250DP to be
used as a Booster Power Amplifier Resettable circuit breaker for
protection against overload and short circuit.Instant transfer to DC
power (2Ã- 12C Car Battery) if AC power fails. Box Speaker/Driver Unit
selector switch. Bass boost defeated at Driver Unit position for
safer operation of driver units. if AC power fails. with booster
c Supply & Installation of Mouthpiece with stand Nos 1.00 30444.00 30444.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Sl.no. Description of Items Units Quantity Rate Amount
d Providing and laying of a pair of 1 sq.mm single core flexible copper
cable (2X 1) to be laid within Existing PVC conduit of suitable size to
be erected above the wall or concealed, as the case may be, with all Rmt 250.00 92.04 23010.20
accessories for all floors etc. as per direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.08.22
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT69.pdf
Tender Document
BOQ69.pdf
Tender Document
GCC CONTRACTING.pdf
Tender Document
MAKE LIST.pdf
Tender Document
SCC.pdf
Tender Document
Signed IP.pdf
Tender Document
Physical Milestone.pdf
Tender Document
SITE PLAN.pdf
Tender Document
GALLERY 2 AND 4 FLOOR PLAN.pdf
Tender Document
GALLERY 3 FLOOR PLAN.pdf
Tender Document
TOILET BLOCK.pdf
Tender Document
corrigendum-968-CORRIGENDUM_ADDENDUM_01.pdf
pdf • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .