86103 ROAD WORK YALAHANKA

Amount

Repairs to pot holes any depth, n.exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads paths etc. Cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming complete all as specified and as directed.

M/L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanningthe cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a primer/ tack coat with bituminous 5kg/10 sqm using rapid setting bitumen cationic emulsion confirming to IS-8887-2001 complete all as specified and as directed.

Ditto all as per item No 2 above but 10kg/10 sqm all as specified and as directed.

M& L for bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with paving bitumen of grade VG-30 with 5.5% binder contents by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 ton capacity vibratory power roller laid with mechanical paver all as specified and as directed.

M& L for bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with paving bitumen of grade VG-30 with 5.5% binder contents by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 ton capacity vibratory power roller laid with mechanical paver including used processed plastic content to mix up with binder content during hot mixing all as specified and as directed. Note:-Processed plastic content shall be measured and paid seperately

Supply only processed plastic content to mix up with binder content during hot mixing all as specified and as directed. Make : KK Plastic Waste management Ltd

M&L for painting 2 to 3mm thick road marking strips n.exc 10 cm width or girth for layout of centre line,dashes, rows, speed brakers, writing letters etc, with thermoplastic road marking paint (reflective) of specified shade or colour by using fully automatic thermoplastic paint applicator macine fitted with profile shoe, glass beads speser, propane tank heater and profile shoe heater oven by experienced operator on road surface incuding road marking paint spray machine as in lines, dashes letters, arrows etc complete all as specified and directed.

M&L for bituminous macadam using paving bitumen of grade VG-30 with 4% binder contents by weight of total mix, rolled and compacted to required camber of consolidation thicknes 75mm or less and gradient using 8 to 10 ton capacity vibratory roller laid with mechanincal paver all as specified and as directed.

S&F water proof energy savings and eco-friendly solar energy road stud transparent made of unbreakable ploy carbonate shell 7 clear facing designed for maintenance & free operation Powered by solar panels any colour with working time 36 to 40 hours after battery if fully charged with brightness senstive auto switch & high visibility HD's of size 125x125x25mm with shank 265 mm . including connecting screws copleted all as specified and as directed. Make Dark Eye (model No.-SKUDA-113) or equivalent in 3M.

S&F repairs for road studs (cat eye) with self two way relection 100x100x20mm (minium) single shank, plastic body or aluminum body. Lighting mode-Reflection, having visual range of 600 to 800mm globe comple all as specified and as directed. Make:- Dark eye (Model No. SKUDA-113) or equivalent in 3M

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45 /50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150X150X300mm) type B1 complete all as specified and directed.

S&F in repasirs for plastic speed bump or speed breakers of size 500X425X75mm made of sturdy plastic, highly resistant to srvere impacts and harsh weather conditiond overtail,interlocking submit to make it bend perfectly into one firm bump made for pre coloured materials (Black& Yellow) and UV stabilised to keep intact is colour studded with reflector's on either side to make it clearly visible to mutants during night hours fixed all as per manufacture's instructions complete all as specified and directed. Make:- Dark Eye or equivalent in 3M

Applying one coart of synthetic enamel paint over cement concrete or plaster surface over 10cm grith or width not otherwise described including preparation of old painted surface all as specified and directed.

Demolition of cement concrete in ground floors and pavings n. exc 15cm thickness (below or above ground level) all as specified and directed.

Dismantling floor, earth or wall tilling including cement mortar bedding (but not backing) and rubhish off the premises complete all as specified and directed.

Excavation over areas, n exc 1.5m deep and getting out in soft/ loose soil all as specified and directed.

M&L for hard core of gauge n.exc 63mm deposited,spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface by broken stone or boulders all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in foundations,filling and mass concrete all as specified and directed.

M&L for PCC 1:2:4, type B-2 (40mm graded stone aggregate) as in path finished even & fair of 100mm thick all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking paver block rubber moulded any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and no pigment all as specified and directed.

Ditto- all as per item No.20 above but except tiles.

Sand filling under floors or in foundations including watering consolidation sprading and levelling in layers n.exc 25cm thick,well rammimg including watering complete all as specified and directed.

Forming 20mm thick Expantion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'B' thickness of concrete slab in 100mm complete all as specified and directed.

Forming constraction joint 30mm deep x10mm wide filled with sealing compound Grade 'B' all as specified and directed.

Removing excavated soil material to a distance exc 1.50Km but n.exc 5.00Km and deposit where directed at a level not exc 1.5m above the starting point all as specified and directed.

Taking down steel Gratings of any description area not exc 1.00 sqm fixed on wall and refixing the same in same opening after raising the level (by means of concrete) for free flow of strom water complete all as specified and directed.

Ditto- all as per srl item No.26 above but area not exc 1.00sqm but not exc 2.00 each complete all as specified and directed.

Scarifying or picking gravelled macadam or bituminous macadam surface area exc 400 sqm ,n.exc 50mm deep and removing n exc 50 meters and stacking complete all as specified and directed.

PATEL CONSTRUCTION

MANJUNATHA CONSTRUCTIONS

M.A.R. Construction and Co

G VENKATESH