ADDN ALTN REPLACEMENT OF HPSV STREET LIGHTS WITH ENERGY EFFICEINT LED LIGHTS WITH TIMER SWITCH AND LED LIGHTS IN CERTAIN OTM AND MD ACCN AT MEERUT CANTT

Amount

Taking out / unserviceable light fittings any type / make / capacity from pole for replacement complete all as specified and directed

Dismantling of LT UG Cable of any size/type complete all as specified and directed

Dismantling of old U/S rusted PCC pole /steel tubular poles of any size necessary disconnecting cables / over head conductor and removing unserviceable pole from site complete all as specified and directed

Supply and fix in repair pole mounting type junction box factory made of size 300x200x105 mm of FRP sheet, shockproof and rustproof, fire retardant as per IS:11731 with front openable hinged door, locking arrangement with 4 Nos aluminium bus bar 40 Amp rating mounted on porcelain insulator, cable gland, lugs consisting DIN type rails for fixing MCB SP 6 Amps, 10 KA, including mild steel flat iron clamp made out of 40x4 mm FI and nut, bolts & washers duly painted clamps, nuts and bolts with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. (Note:-Rate of MCB shall be included in the quoted unit rate)

Supply and fix in repair pole mounting type junction box factory made of size 200x140x95 mm of FRP sheet, shockproof and rustproof, fire retardant as per IS:11731 with front openable hinged door, locking arrangement with 2 Nos aluminium bus bar 40 Amp rating mounted on porcelain insulator, cable gland, lugs consisting DIN type rails for fixing MCB SP 6 Amps, 10 KA, including mild steel flat iron clamp made out of 40x4 mm FI and nut,bolts & washers duly painted clamps, nuts and bolts with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. (Note:-Rate of MCB shall be included in the quoted unit rate)

M&L for auguring of hole suitable for passing 40mm to 100mm bore pipe in true horizontal position under road, PCC paths etc, by means of mechanical ring/ auger after doing ultrasound to prevent any damage to existing cables pipe line specified and directed coming in the route not exceeding 1.5 m in depth below existing surface level of road and not excd 30M in length complete all as specified and directed. Note : Pipe shall be measured and paid separately under respective item and any damage to existing cables of any type shall be made good by the Bidder without any extra cost to department.

Supply and fixing 50mm nominal bore Galvanized mild steel pipe/ tubing, light grade for protection of earth lead/ passing cable complete with all fittings, laid in trenches/ under roads, drain, paths, fixed to poles/ walls with Mild steel clamps, bolts, nuts and washers complete all as specified & directed. (Note:-Excavation & Earth work, mild steel clamps, bolts, nuts and washers shall be measured and paid separately).

Supplying, transporting, erecting and fixing steel tubular swaged poles type 410 SP-31 (9.0 meters long) complete with cast iron/ mild steel base plate, CI finial taper plug, bolts, nuts and screws as specified, including painting exposed surface steel tubular poles with two coats of aluminium paint over one coat of red oxide primer and black bituminous paint on steel surfaces embedded in concrete and providing 300 mm wide bands (5 bands/ straps with fluorescent synthetic enamel paint in alternate colour of black and white from plinth block and numbering of poles, painting embedded portion of poles with one coat of bituminous paint complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete using necessary form work complete all as specified & directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping using necessary form work complete all as specified & directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundation including form work and finishing the exposed surface of concrete even and smooth complete all as specified & directed.

Supply and fixing in repair Digital street light timing switch having lighting control (ON-OFF) through digital 24 Hrs and pre-wired with suitable size copper conductor single core PVC sheathed cable and all mechanism fitted into LT feeder pillar box (KIOSK) outdoor type, pole mounted. The panel shall be dust and vernin proof, made of CRCA MS sheet fixed with 25mm x 4mm thick MS flat iron strip complete with nuts, bolts & washers, duly powder coated finish. Front opening type with locking arrangement complete all as specified and directed suitable for three phase and neutral with under and over voltage protection relay, contactor 65A/63A TP, MCB 63A TPN, 440 Volts, 50 Hz, AC supply system.

S&F integrated high lumen LED tube light fitting surface mounting, Poly carbonate batten, 4', 240V, T5, 22 Watts, 6500K, Min 100 lumens per watts, including taking down old unserviceable one complete all as specified and directed. Make:- Philips Cat No.BNO21C LED 225 PSU CW GR / Havells Cat No.LHEXA CP71N15022 / Wipro Cat No.D532265

S&F B22 Base, 2 pin, retrofit, LED Lamp, 14 Watts, 240V, 6500K, Min 100 lumens per watts including taking down old unserviceable one complete all as specified and directed.

S&F B22 Base, 2 pin, retrofit, LED Lamp, 9 Watts, 240V, 6500K, Min 100 lumens per watts including taking down old unserviceable one complete all as specified and directed.

S&F B22 Base, 2 pin, retrofit, LED Lamp, 4 Watts, 240V, 6500K, Min 100 lumens per watts including taking down old unserviceable one complete all as specified and directed.

S&F LED integrated Bldg Security Light fitting 25 Watts, 240V, 6500K, Min 100 lumens per watts with built in surge protector alongwith suitable wall bracket, MS Clamps, anchoring bolts, 1.50 Sqmm 3 core PVC sheathed cable including taking down old unserviceable one complete all as specified and directed. Make:- Philips Cat No.BNO42P LED 25 CW SLE S1 PSU GR P4210 / Havells Cat No.LHEXAYP7PN6K030 / Wipro Cat No.D923065

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc or for laying cables, poles, stay assembly, shafts, wells, cesspits, manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out, in soft/loose soil complete all as specified and directed.

Returning, filling in excavated material in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing of excavated material (soil) to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for laying river dry and clean sand filling for cushioning in layer 8 cm before laying cable and 15 cm after laying cable in trenches and punned upto 18 cm thick around under ground cable complete all as specified and directed. (Note:-Thickness after punning shall be measured for payment)

M&L Bricks for protection cover to underground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm complete all as specified and directed.

Supplying fixing, connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 100 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal voltage 240V, AC 50 Hz, operating voltage range 120V -280V, suitable for ambient environemental condition of station, TDH<10%, Pf> 0.95, lumens > 110 LPW, lngress protection not less than IP66, with 10 KV SPD, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 and making connections with cable complete all as specified and directed. Make:- Crompton Cat No.TRP-411-100-57-SL-GL-NSG / Philips Cat No.BRP410 LED 100 CW HEMRPCS2 PSU GR 9405 / Havells Cat No.ENDURACITYLINERNEOSL 100W LED 757SASYBOTG

Supplying fixing, connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 70 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal voltage 240V, AC 50 Hz, operating voltage range 120V -280V, suitable for ambient environemental condition of station, TDH<10%, Pf> 0.95, lumens > 110 LPW, Ingress protection not less than IP66, with 10 KV SPD, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 and making connections with cable complete all as specified and directed. Make:- Crompton Cat No.TRP-409-70-57-SL-GL-NSG / Philips Cat No.BRP 032 LED 70 CW MR PSU GR DX / Havells Cat No.ENDURAPEARLPLUSSL 70W LED 757SASYTOPC

Supplying fixing, connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 45 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal voltage 240V, AC 50 Hz, operating voltage range 120V -280V, suitable for ambient environemental condition of station, TDH<10%, Pf> 0.95, lumens > 110 LPW, Ingress protection not less than IP-66, with 10 KV SPD, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 and making connections with cable complete all as specified and directed. Make:- Crompton Cat No.LSTS-45-CDL / Philips Cat No.BRP 032 LED 45 CW MR PSU GR DX / Havells Cat No.ENDURACITYLINERNEXGENSL45W LED 757SASYBOPC

Supplying fixing, connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 25 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal voltage 240V, AC 50 Hz, operating voltage range 120V -280V, suitable for ambient environemental condition of station, TDH<10%, Pf> 0.95, lumens > 110 LPW, Ingress protection not less than IP-66, with 10 KV SPD, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 and making connections with cable complete all as specified and directed. Make:- Crompton Cat No.LSTS-25-CDL / Philips Cat No.BRP 042 LED 25 CW SLE PSU GR DX / Havells Cat No.ENDURAPEARLSL25W LED757SASYTOPC

Supply and fixing brackets made of 32/40 mm bore or higher size light grade 1.20 Mtr length GI pipe in bend shape of 120 degree including clamp made of mild steel FI 25x4 mm strip nuts, bolts and washers, complete all as specified and directed.

S&F PVC insulated wire copper conductor 3 core 1.5 Sqmm for connection of junction box to street light including PVC conduit 20 mm dia and necessary clamps nuts and bolts for fixing arrangement along the pole complete all as specified and directed.

M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade with cross sectional area 16 sqmm, 4 core, including suitable lugs to connection complete all as specified & directed.

M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade with cross sectional area 16 sqmm, 2 core, including suitable lugs to connection complete all as specified & directed.

M&L for earthing for street light poles/transformer/feeder pillar box etc with galvanized mild steel earth plate (electrode)600 x600x6.00 mm thik burried directly in ground earth pit not less than 2.25 mtr deep below ground level surrounded with adequate quantity of charcole dust mixed with salt ot a packed thickness of 15 cm all round the plate, using 4 mm dia GI wire earth lead riveted to earth plate at one end and other end connected to earthing test point, GI earth wire incased in and including 15 mm dia GI "light grade' pipe from upper end of earth plate upto test point including 20 mm dia GI pipe, light grade as watering pipe from earth chamber to upper edge of earth plate, CI funnel with wire mesh fixed on water pipe and provision of PCC chamber and RCC pit cover with lifting handle and necessary excavation earthwork complete as shown in electrical plate No 3 of SSR Part-I complete all as specified and directed.

Note : (i) Tenderers may note that amount of credit Rs 880878.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. (ii) Contractor will submit Guarantee for LED light fittings for a period of 02 (two) years after completion of contract.

M/S ANIL KUMAR

PK Constructions

pooja construction