Providing and Laying of RMC M-40 grade on road and 2ft and 3ft wide RCC Nallah in 60ft road to Air Force Station main gate in ward No.06, Faridabad alongwith 5 Year Maintenance guarantee.

Amount

Providing and laying in position separation membrane 125 micron thick impermeable plastic sheet of make IPCL Shavalik or equivalent make in transparent white colour over the under surface complete in all respects to the entire satisfaction of the Engineer-in-charge

Providing and laying in position machine batched, machine mixed cement concrete vibrated ready mixed cement concrete (R.M.C.) of grade M-40 with cement content not less than 420 kg./ Cum imparting minimum flexural strength of 40 mpa at 28 days. The slump value will be in the range of 30+15 mm for laying on road including the cost of steel form work with sturdy M.S. Channel section including cost of admixture in recommended proportions (as per IS 9103) to accelerate/ retard-setting of concrete improve workability without imparting strength and durability including pumping concrete with pumps if required. The RMC is to be procured from plants of. ACC RMC plant, Shree Cement RMC plant, Ultra Tech RMC plant, J.K. Cement RMC plant, Ambuja Cement RMC plant, India Cement RMC plant, Binani Cement RMC plant & J.K Laxmi, A.C.C, Nuvoco, Mangla Redimax Pvt. Ltd, Radha cement Products J.P & Bro. RMC, Shree Ram Concrete Faridabad & Gurgaon.The finishing of the laid cement concrete with surface vibrator and mechanical trowel including cost of curing for 28 days, barriers, diversion of traffic, lighting arrangement and chowkidar etc. complete in all respects to the entire satisfaction of the engineer-in-charge.

Providing supplying and using through shapes galvanized steel fibers of diameter 1mm and length 35mm in concrete SFRC crash barriers as per specifaction as laid down in ASTMA820M-2006 The fiber shall be used as per guidelines for design and construction of fiber reinforced concrete pavement (first revision IRC: SP-46:2013) the quality of the fiber shall be used @0.1% by volume equivalent 8kg/cum as laid down in table 3 (page-13) of IRC: SP-46:2013.

Providing and making saw cut transverse joint/construction joint as per approved drawing provided at a maximum distance of 4.5m including the cost of covering of dowel bars with thin plastic sheath for at least 60% of the length made up to depth 20mm before sealing the joint 5mm before sealing the joint 5m thick compressible de-bounding strips with paper bock shall be filled with polysulphide/silicon sealant. The sealant shall be applied slightly to a lower level than the slab with a tolerance to the entire satisfaction of the engineer-in-charge

Extra for making rough surface of the concrete pavement for providing non slippery surface by mechanical cutter for safe plying of vehicles complete to the entire satisfaction of the Engineer-in-charge.

Bidder Name

Amount

HCK Infratech Pvt. Ltd.

Tek Chand

Tek Chand

Tek Chand