Loading
Loading…
Loading…
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
19 Sept 2026, 6:00 pm6d left
GE (P) Navy Mandovi
GE (P) Navy Mandovi Military Engineer Services INS Mandovi
As per tender documents
2026_MES_787199_1
8708/E8 GE (P) NAVY MANDOVI
Open Tender
Civil Works
Item Rate
180 days
Mandovi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (P) Navy Mandovi
₹90,000
Yes
1 Sept 2026
1 Sept 2026
21 Sept 2026
1 Sept 2026
19 Sept 2026
14 Sept 2026
2 Sept 2026 - 12 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Attending complaints of leaking/unserviceable pillar cocks, wall mixers, WHB mixers, bib taps, two-way bib taps, stop valves, angle cocks, etc. of 15 mm to 20 mm dia and making the same fully functional and leak-proof, including taking down carefully, dismantling, servicing, refixing and replacing minor unserviceable parts such as rubber washers, leather washers, brass jumpers and other similar consumable components of suitable size, complete all as specified and directed by the Engineer-in-Charge. Note: The quoted rate shall be deemed to include cost of all labour, tools & plants, minor spare parts, consumables, thread, PTFE tape, sealing materials and other incidental items required for satisfactory repair and functioning of fittings. However, major replacement parts such as spindle/headgear assemblies, cartridges/phases of CP pillar cocks, wall mixers, WHB mixers, two-way bib taps, CP bib cocks, angle cocks, etc., if replaced, shall be measured and paid for separately under respective items. | |||||
| 2Attending complaints of leaking/unserviceable low level flushing cisterns of PVC or chinaware type and making the same fully functional and leak-proof, including taking down carefully, dismantling, servicing, refixing and replacing defective/minor unserviceable parts such as rubber washers, PVC levers, PVC/CP knobs and other similar consumable components, if required, complete all as specified and directed by the Engineer-in-Charge. Note:The quoted rate shall be deemed to include cost of all labour, tools & plants, minor spare parts, consumables, thread, PTFE tape, sealing materials and all other incidental items required for satisfactory repair and functioning of the flushing cistern complete. | |||||
| 3Attending complaints of internal water supply pipes, fittings and bottle traps for removal of blockages, leakages, air locks, deterioration of concealed/exposed pipes and fittings, and other defects of any description, including clearing of choke/air lock by pressure pump or any other suitable means, taking down carefully and refixing of pipes and fittings, and replacing old/unserviceable pipes and fittings with new ones wherever required, complete all as specified and directed by the Engineer-in-Charge. The work shall include checking, dismantling, servicing, testing and restoring the water supply system to proper functional condition, including rectification of minor leakage complaints and allied works complete. Note: The quoted rate shall be deemed to include cost of all labour, tools & plants, consumables, thread, PTFE tape, sealing materials and all incidental charges required for attending complaints and restoration of system. New GI/CPVC/PVC pipes and fittings replaced, if any, shall be measured and paid separately under respective Supply & Fix items of this schedule. This item includes labour component only for removal of blockages, air locks, leakage rectification and associated repair works. | |||||
| 4Checking and Attending to Carpenter work in repairs to Joinery ,(wooden/ steel/aluminium)of iron alumunium mongery , pelmet box ,toughened glass door and partition, door spring ,rooling shutter etc requring carpenter work and carrying out minor repair such as tighting of screw nails ,wire of false celling ,easening of joinery,door spring etc including replacement of glass panes,wire cloth to joinery or any defective items /materials complete all as specified and directed by Engr-in-charges. Note:Cost of tools, plants, spare parts, nails or screws, etc.,. materials shall be deemed included in quoted rates. | |||||
| 5Checking and Attending to welding work in repairs to steel windows, handles,door spring,iron frame of doors,rolling shutter garrages and other iron misc works, welding (run or spot welding as per site require maint) including replacement of defective items/material alongwith and including welding machine gloves ,welding glass welding rodany other tools required ,as per requirement complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, etc.,. materials shall be deemed included in quoted rates. | |||||
| 6Material & Labour for seven-stage cleaning and sterilization of RCC/PVC water storage tanks of capacity as below, of any description and at any height/position, including complete cleaning, disinfection and bacteriological treatment of internal surfaces using approved chemicals such as TERBAC-G5/Inchlor-5/NB-10 and TERBAC-G65/Inoxi-60/NB-69 or equivalent approved products, along with Ultra Violet (UV) sterilization treatment, complete all as specified and directed by the Engineer-in-Charge. The seven-stage cleaning and sterilization process shall comprise the following operations:- (i) Draining Stage: Complete draining/dewatering of water from the tank using outlet valve or high-capacity dewatering system/pump. (ii) Algae Removal & Scrubbing Stage: Cleaning and removal of algae, fungus, scaling and deposits from inner surfaces of tank using approved laboratory-tested branded chemicals such as TERBAC-G10/Inoxi-60/NB-69 or equivalent, including manual/mechanical scrubbing of walls, floor and ceiling surfaces. (iii) Fresh Water Jet Cleaning Stage: Thorough cleaning of tank surfaces with fresh water using high-pressure/high-speed jet pump. (iv) First Bacteriological Treatment Stage: Disinfection and first bacteria screening using Government Laboratory certified halogen compound such as TERBAC-G5/Inchlor-5/NB-10 or Engineer-in-Charge approved equivalent disinfectant. (v) Vacuum Cleaning Stage: Removal of sludge, sediments and residual waste material from tank floor using industrial vacuum cleaner. (vi) UV Sterilization Stage: Second bacteriological screening and sterilization using Ultra Violet Ray equipment inside the tank for elimination of suspended bacteria and microorganisms. (vii) Final Sterilization Stage: Final sterilization and third bacteriological treatment of tank floor and internal surfaces using laboratory-certified strong oxidizing agents such as TERBAC-G65/Inoxi-60/NB-69 or equivalent approved product. The work shall also include plugging/disconnecting outlet pipe of overhead tank prior to cleaning to prevent entry of scales/sludge into pipe system and reconnecting the same after completion of cleaning operation. After completion of cleaning and sterilization, contractor shall fix a sticker indicating date of cleaning, name of site/station and agency details, and submit sterilization/completion certificate to the Engineer-in-Charge. Make/Agency: Rays Cleantech / Inus Watertech / Satya Enterprise or equivalent approved specialized agency. Note: (i) Contractor/agency shall submit Government Laboratory Test Certificates for disinfectants/chemicals proposed for use before commencement of work. (ii) All cleaning and sterilization staff shall be covered under accidental insurance policy. (iii) Minimum 30% of deployed sterilization team members shall possess minimum three months’ certificate/training in water tank sterilization work. (iv) Contractor shall be responsible for rectification of complaints arising during/after cleaning operation such as non-filling of tank, overflow due to damaged float valve, blockage/choking etc., and quoted rates shall be deemed to include the same. (v) The quoted rate shall include cost of all labour, chemicals, consumables, dewatering arrangements, UV equipment, tools & plants, safety equipment, transportation, insurance, testing, certificates, stickers and all incidental charges required for complete execution of work. | |||||
| 6.01 | Tank not exceeding 500 Litre capacity | 40 | Each | - | - |
| 6.02 | Tank not exceeding 1000 Litre capacity | 20 | Each | - | - |
| 7M & L for cleaning of manholes/chambers not exceeding 2.00 Sqm in area and upto 1.50 m depth, including pumping out liquid sludge, sewage, wastewater and other waste materials; removing and disposing of all solid materials such as stones, bricks, pipes, plastic articles, debris, etc. from the manholes/chambers; plugging, blocking or diverting flow, if required, during execution of work. The work shall also include taking all necessary safety precautions and protective measures for safe entry and cleaning operations, such as provision and use of gas masks, safety belts, hand gloves, gum boots, cell torch/lighting arrangements and other safety equipment as required. Spreading of bleaching powder/disinfectant on the removed silt/sludge to avoid foul smell and unhygienic conditions, complete all as specified and directed by the Engineer-in-Charge. Note: The quoted rate shall be deemed to include cost of all labour, tools & plants, dewatering arrangements, safety equipment, consumables, transportation, disposal of removed sludge/debris at approved location, and all incidental charges required for complete execution of work. | |||||
| 8Cleaning of the blockage of water closets, bath rooms, nahani traps, floor traps and gully traps of any type and size and up to any depth and removing all silts and solid materials to out side MD land complete all as specified and as directed by Engr-in-Charge. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
TenderPages.pdf
Tender Documents • 0.86 MB
BOQ_882213.xls
BOQ • 0.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .