SITC of Automatic Sprinkler System, Yard Hydrant, Under Ground Static Storage Water Storage Tank and Pump House for newly Constructed CHC Building Tileibani Buildings.

FIRE PUMP ROOM EQUIPMENT Supplying, installing testing and commissioning of electrical motor driven Main Pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 1620LPM (96 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting, coupling, coupling guard and base plate for pump, fabricated mild steel channel,foundation bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall be coupled to electrical motor with speed of 2900 RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc. WILO/KIRLOSKAR/KSB

Supplying, installing and commissioning of Diesel Engine driven common stand by pump, horizontal centrifugal end suction backpull out radiator cooling type with gland packing and capable to deliver 1620 LPM (96 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting, coupling, gear box, base plate for pump, fabricated mild steel channel with foundation bolts etc., It includes providing and fixing fuel oil tank (capacity as perTAC requirements) with supports and necessary pipe works for diesel engine, battery and battery charger to be connected to control panel of diesel engine and exhaust silencer including necessary pipe work and lagging, pump should have the dry run sensor provision, etc., and shall be automatic in operation with diesel engine control diesel engine control panel with 24V DC storage battery & its battery charger with required Ampere - hour rating, terminal box (2 nos. of 12volts), as per TAC including all associated electrical works. WILO/KIRLOSKAR/KSB

Supplying, installing and commissioning of electrical motor driven Jockey pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 180LPM (10.8 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting pad and flexible connections at discharge end of the pipes, pump should have the dry run sensor provision etc. and shall be automatic in operation.The pump shall be coupled to motor of with speed of 2900RPM and complete set shall be mounted on common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc. WILO/KIRLOSKAR/KSB

Control Panel for Fire pumps. Supply,Installation,Testing & Commissioning of dust and vermin proof front operated compartmentalised cubicle type control panel suitable for operation on 415 Volt, 3 ph, 50 c/s power supply with 180 Amp TPN Aluminium busbar fabricated out of 2 mm thick CRCA sheet duly powder coated after treatment in 7 tank process with top entry cable gland plate including interconnections, earth bus as required comprising of : INCOMING One(1) 160 Amp 25 KA 3P with solid neutral SDFU Voltmeter with s/s, Ammeter with S/s, 3 Nos 100/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and 4P 6A MCB OUTGOING one(1) 125 Amp 3PMCCB,25kA with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs 100/5, Ammeter S/S. b) 1 No (Outgoing) 63 Amp 3PMCCB, 25Ka with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 50/5 CT,Ammeter,S/S c) 1 Set Relay, Auto/ Manual Selector Switch, Battery Charger, Annunciation Panel, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump as per direction of Engineer-in-charge.d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required. Make of switchgear-Legrand/Schneider/Siemens FABRICATED CPRI APPROVED

1100 V GRADE POWER / CONTROL CABLES Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. The quoted rate shall includes the end termination for 1.1KV cables with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. Above 10 mm² shall be aluminium conductor type. The minimum size of the cables shall as mentioned below,Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI a)3 core x 35 sqmm Aluminium conductor cable

b) 3 core x 10 sqmm Aluminium conductor cable

c) 8 core x 2.5 sqmm

d) 2 core x 1.5 sqmm

e) 3 core x 6 sqmm Aluminium conductor cable

CABLE TRAY Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables.