Maintenance work in office premises of the Assistant EngineerA-E of Islampur A-E Sub Division under Raiganj A-M Division

Repairing and Maintenance

Supplying, fitting & fixing 1st quality Ceramic tiles in wall sand floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white

Taking out shutter of door and window, dismantling by parts (for repair orreplacement of damaged parts) , reassembling and refitting and rehanging samewith old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only).

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps.(The quantum should be correted upto three decimals). (c) Sal : Siliguri

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) (iii) 40 mm thick shutters with 19mm thick panel of size 30 to 45 cm. (a) Ordinary Teak Wood

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mm. X 75mm. X 3.50mm.

Taking out old iron higes and fitting, fixing the same with new steel screws.e) 100mm. Long butt hinge.

i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(b) 250mm long.

a) Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.

Removing old paint from blistered painted surface withapplication of soda, sajimati or any approved chemical paint remover and exposing the original surface including cleaning and thorough washing to remove all traces of the removing agent including taking out shutters and refixing the same where necessary.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.). [Vide Page no.200

Applying Acrylic Emulsion Paint of approved make and brand on wall sand ceiling including sandpapering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats) ii) Luxury Quality.

French polishing to wood work including preparing surface (ordinary gloss) (a) On new wood work.

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white b) 2- track sliding window. b)(i) Bottom frame

b)ii) Top and side frame. For 7 nos Window Top

d) Shutter for all track sliding window. Window Bottom=Top.For 7 nos Window Top

d) Shutter for all track sliding window.iii) Interlock membe Window Side member

ii)Style side member.style for 7 nos window

g) Fixed glazing.Top and side member Fixed glazing for 7 nos window

Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. i) For sliding windows.EPDM gusket for 7 nos window

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. for 7 nos window

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. ii) 4mm thick coloured / tinted / smoke glass.

Supplying maruti lock (100mm).

2 ton 5 star Inverter split AC with Copper condensor coil 6 in 1 cooling , Dual Filttration , Auto cleanser facility,Full load capacity: 6000 watts; Half load capacity :3000 watts

Heavy Duty Fix-It Split Ac Stand/ Air Conditioner Outdoor Unit Mount Mounting Bracket for 1 Ton, 1.5 Ton, 2 Ton, 2.5 Ton Ac Load

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 40 AMP-Schneider

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire

Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in EI conduit/GI conduit and painting 4x2.5sqmm wire in 25 mm conduit incl. S&F 2x10 SWG GI ECC

Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals)

Wooden eaves board as per design, fitted and fixed complete: In ground floor (ii) Ornamental eaves board (Ordinary Teak) eaves board (Ordinary Teak) (a) 19mm thick

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (v) 16mm thk for drawer

Providing, fitting and fixing in position, medium density fibre board conforming to IS: 12406-1988 for plain and IS: 14587-1998 for prelaminated made of wood fibre bonded with Urea formaldehyde for interior grade and Phenol Formaldehyde for exterior grade conforming to per IS:848-1974 as per approved make and brand as per direction of Engineer-in-Charge.(For drawer both side lamination In Ground Floor b) Interior grade. 8 mm

Anodised aluminium grip handle with base plate of approved quality fitted and fixed complete. a) With base plate.For Table drawer. (i) 165mm grip x 12mm dia rod x 42mm plate x 3.2mm thick.

Scantling upto 50mm wide and 12mm thick (chamfering or rounding) for ceiling/partion battens including fitting, fixing in position with washers, coach screws etc. complete.:(b) Sishu / Champ / Badam / Gamar / Bhola / Mogra / Hallak 1Mtr. X 5 nos=5 Mtr.

Sub Total = [Sum of item 1.01 to 1.35]

Add GST @18%, as applicable on Sub Total

Add Labour welfare cess @1%

Please Enable Macros to View BoQ information