Construction of Community Centre, Sector 12 A, Gurugram

Amount

Supply and Plantation of Shrubs Height 1 m minimum Supplied in unit packs and plantation in complete, digging,manuring , watering, pruning, dressing with maintenance for 3 months (NS) 01 Allamanda nerifolia BUSH ALLAMANDA 02 Caesalpinia pulcherrima PEACOCK FLOWER 03 Calliandra brevipes PINK POWDEPUFF 05 Cestrum nocturnum NIGHT JASMINE 10 Hibiscus rosa - sinensis CHINA ROSE 11 Ixora sps IXORA / RKMANI 12 Jasminum grandiflorum CHAMELI / JUHI / MALTI 19 Laltana camara LALTANA 20 Laltana montevidensis TRAILING LALTANA 21 Murraya paniculata ORANGE JASMINE 22 Poinsettia pulcherrima POINSETTIA 25 Tecoma stans TECOMA

`Providing and fixing pavilions with traditional Red Roof Tiles on MS tubular structure and steel posts with CC flooring of size 3.6m x 3.6 m as per plan shape and height 2.7m with pendent LED lights 32 W `

`SITC of of LLDPE Drip Tubing 16 mm OD, 4 Kg rating with all fittings including 100 mm trenching, backfilling and fixing U Clips.The shrub plantings shall be irrigated by 16 mm drip tubing with in-built pressure compensating and self flushing drippers spaced at regular intervals of 60 cm c/c. The drip tubes shall be placed on the soil and shall be staked at every 10 mtr intervals to prevent lateral movement. The drip tubing shall be laid such that the pre-fixed drippers on drip tubing shall be facing the ground. The spacing between the drip tubing rows shall not be more than 600 mm or as directed by the Engineer-in-Charge. For Shrub Area- • spacing between lateral -0.6 Mtr • Spacing between Drippers -0.4 Mtr • Discharge of Drippers – 4 Lph `

`SITC of 800 KVA, 11/0.433 KV Copper Wound Outdoor Type Transformer Complete with first filling Of Transformer Oil and All other Standard Accessories. (As per BIS Level-I Specification.) (IS:1180) and as per ECBC compliance. `

`Supply, installing, testing, commissioning and handing over of Axial Fans (min. efficiency 70%) with MS Supports structure to suspend from ceiling sound level - 70db (A) @ 3mtr w/o silencers (The cost of FAN Motor Starter Panel with BMS Connectivity complete with necessary control, indicating OLP.SPP, ON/OFF push Buttons with ON indication, 2 nos, Non Polarised NO-NC contacts for tripping on signal from Fire Dampers/Fire Alarm Panel with all required accessories should also be included in the quoted Price with required cable from starter panel to Fan with max. length of cable considered up to 15 mtr. with end termination. Extra length of cable will be paid as per BOQ rate.) ` Capacity- 8000 CFM - 30 mm TSP

`Supplying, fixing, testing commissioning of butterfly valve PN 1.6, with Bronze/ Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required. ` 150 mm dia

19` 42U APW President Rack with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate CCTV systems equipment and accessories as mentioned in the BOQ above and including all connections and terminations as required.

3 Meter long with Single arm (1M size) suitable for required light fixture mounting and with arrangement, Bajaj or equivelent approved from the list of makes

Barricading of Powder coated MS sheet 3Mtr high arround the working space as per prevailing instructions (N.S)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 300x300 mm 400mm deep including with heavy duty ductile double sealed iron recessed frame and cover with load rating not less than 12.5 tonnes and as per Euro norms BS EN -124

Construction of tubewell up to 100m depth and above to accomodate housing and assembly pipe in all types of alluvium strata by rotay drilling method with `code of practice for construction and testing of tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both amended up to date) with supply of bail plug if necessary.The work will not include cost of housing pipe and strainer pipe assembly cost, gravel and development work. Work would be deemed completed only after obtaining sound free water during pumping.

Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design :Depth up to 1.5 M

Construction of raised planters with black granite ledge and wall cladding (surface area of perimeter face to be measured

EXTERNAL LIGHTING Feeder Pillar INCOMER: 32A, FP MCB, 10 kA `C` curve protection release, ON LED indicating light with control MCB -9Set BUS BAR - 32A, 415V three Phase 4 wire, four equal ratting colour coded, non-adhesive PVC insulated electrolytic `Al` conductor bus bars OUTGOINGS 16 A, FP MCB, 10 kA `C` curve protection release, ON LED indicating light with control MCB - 7Set NOTES: 1)L.T.Panel shall be suitable to receive all incoming and outgoing from Top /Bottom 2)MCCB`s shall be with extended type Door operating mechanism with door interlock, phase barriers and copper spreaders. 3) Ics=100%Icu, for all MCCBs 4)All CT`s shall be cast resin type. 5) All Incomers and Bus coupler of main LT panel shall be interlocked. 6) Floor mounted type panels shall have ISMC base channel at entire bottem of ISMC-100MMsize.

Extra Provision for for OH tank water indicators

Making sewer connection with existing sewer line 450 mm

P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 and 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia. 300 / 260 mm

P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 and 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia. 50/55 mm

P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 and 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia. 110 / 95 mm

P and F of IP 66 protected High Power LED Flood Light system with extruded aluminium housing, toughened glass diffuser with suitable lenses on LED to acheive various beam angles, System power 40W - 60W 240V, 50 - 400 Lumens system output of High Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency ) 85% and in compliance to IEC standards (Price to be quoted with light fixture). System life of 25,000 Burning Hours with 70% of initial Lumens maintained. Light output in Red, Green, Blue, Cool white or Warm White Colour as per engineers choice. Fixtures shall be CE and KEMA compliance High Power LED Flood Light 60W

P and F of IP65 IK10 protected LED Bollard fixture with extrusion aluminium housing, LED 8W - 12W, 220V-240V, 50Hz LEDs with available in quick connecting cable coupled with various mounting accessories.Driver shall be high efficiency having efficiency ) 85% and in compliance to IEC standards (Integral with light fixture). System Power Consumption of 8W - 12W ~ 300 - 400 lumens, system life of 25,000 Burning Hours with 70% of initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. Fixtures shall be CE and KEMA compliance. 0.8 mtr high bollard

Powder coated, extruded aluminium Diffuser in as required and as shown in the drawings.With Damper

Powder coated, extruded aluminium Diffuser in as required and as shown in the drawings.Without Damper

Providing Accent lights for plantation includin (skipes), wall recessed lights, in planters, uplighters , refelcetors alongwith wiring , commissionong and necessary hardware

Providing and fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 ` BSP bottom entry on Pump Delivery Line complete with Ball valve

Providing and fixing 1200 mm high and 600 mm wide PVC /Metal letters with lighting,power supply etc as per details and design with suitable hardware to anchor the same on subsurface (NS)

Providing and fixing 900 mm wide Vertical fins consisting of M.S. pipe 65x38mm coverd with aluminium composit panel 4mm thick on both side as per drawing complete fixed at site. (N.S)

Providing and fixing C.P. flange (cap)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( work Exposed on wall)of make Aquagold /supreme .32mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( work Exposed on wall)of make Aquagold /supreme .40 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Enternal work Exposed on Terrace )of make Aquagold /supreme .32mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Enternal work Exposed on Terrace )of make Aquagold /supreme .40 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Enternal work Exposed on Terrace )of make Aquagold /supreme .50 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) of make Aquagold /supreme .15 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) of make Aquagold /supreme .20mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) of make Aquagold /supreme .25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) of make Aquagold /supreme .32mm nominal outer dia pipes

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 30KA, FP MCCB

Providing and fixing forged brass body quarter turn lever operated ball valve with forged brass hard chrome plated ball, disc and gland packing shall be PTEF tested to 25 Kg/Sq.cm pressure.25 mm nominal bore

Providing and fixing forged brass body quarter turn lever operated ball valve with forged brass hard chrome plated ball, disc and gland packing shall be PTEF tested to 25 Kg/Sq.cm pressure.40 mm nominal bore

Providing and fixing forged brass body quarter turn lever operated ball valve with forged brass hard chrome plated ball, disc and gland packing shall be PTEF tested to 25 Kg/Sq.cm pressure.50 mm nominal bore

Providing and fixing Glass fiber reinforced concrete (GRC) lattice screen of thikness for 40mm or as per manufactuarer blocks complete fixed and painted at site includinf scaffolding (N.S)

Providing and fixing gunmetal equilibrium float valve with S.S. rod and 2 mm thick copper float, tested for 10 Kg/Sq.cm complete including companion flanges, nuts, bolts, washer etc. complete in all respect.50 mm dia

Providing and fixing gunmetal equilibrium float valve with S.S. rod and 2 mm thick copper float, tested for 10 Kg/Sq.cm complete including companion flanges, nuts, bolts, washer etc. complete in all respect.65 mm dia

Providing and fixing in position the following Rigid PVC condensate drain pipes cut to required lengths and necessary elbows, tees and reducers, hanger, supports, fittings and with 9 mm thk. Nitrile Rubber Insulation as per drawing. Quoted price shall be inclusive of adhesive, nitrile rubber tape etc. as per specification and drawing. 32 mm dia.

Providing and fixing in position the following Rigid PVC condensate drain pipes cut to required lengths and necessary elbows, tees and reducers, hanger, supports, fittings and with 9 mm thk. Nitrile Rubber Insulation as per drawing. Quoted price shall be inclusive of adhesive, nitrile rubber tape etc. as per specification and drawing. 25 mm dia.

Providing and fixing laminated wooden paneling constisting of wooden frame of 40x75mm of soft wood and coverd with 12mm thick ply-wood and 1mm thick sunmica comp. in all respects. (N.S)

Providing and fixing of 4 way suction coupling for fire brigade withdrawal of water from fire tank with 150mm dia pipe and foot valve.

Providing and Fixing Pop up sprinkler Irrigation System in Lawn with ,Tee, Bend, Elbow, Valve box and all other necessary fittings required for installation.

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality / OFFSET 110mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Bend 45 Dg. 75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Single `Y` with Door 110mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Single `Y` with Door 75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Bend 45 Dg. 110 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Bend 87.5 Dg. 110 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Bend 87.5 Dg. 75 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Nahni Trap with Jali 4” 110 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Coupler (socket).160 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Single Tee with Door 160 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Bend 45 Dg. 160 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Coupler (socket).200 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Coupler (socket).250 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme / kasta Door Bend 87.5 Dg. 160 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make...Single Tee with Door 110mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make..Single Tee with Door 75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make110mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality make.110mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make of approved quality /make Supreme/ kasta 200 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make of approved quality /make Supreme/ kasta 250 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make.75 mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make75 mm dia

Providing and fixing vertical blinds made of vinyl fabric and Aluminum sliding hardware as per design , shade and pattern approved by architect , of make wintek or vista (NS)

Providing and laying UPVC pressure pipes of 10Kg/Sqcm pressure rating class IV (IS : 4985-1983) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 100m complete, compaction and consolidation Including laying alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design (For garden hydrants). 32 OD mm.

Providing and laying UPVC pressure pipes of 10Kg/Sqcm pressure rating class IV (IS : 4985-1983) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 100m complete, compaction and consolidation Including laying alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design (For garden hydrants). 40 OD mm.

Providing and laying UPVC pressure pipes of 10Kg/Sqcm pressure rating class IV (IS : 4985-1983) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 100m complete, compaction and consolidation Including laying alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design (For garden hydrants). 50 OD mm.

Providing Laying and jointing glazed S.W. pipes grade `A` (IS:651 marked) of approved make with spun yarn and stiff mixture of cement mortar 1:1, excavation and refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete.250 mm dia

Providing, fixing, testing and commissioning of 15 mm dia size ,quartzoid bulb sprinkler heads suitable for 68 degree centigrade rating of the following type : Pendant type

Providing, installation, testing and commissioning of Brass ball valves of following sizes as required. 25 mm dia.

Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, G I bolts, nuts, washers etc. as required. 80 mm dia

Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, G I bolts, nuts, washers etc. as required. 150 mm dia

Providing, installation, testing and commissioning of FILTER FEED PUMP . The pump shall have cast iron casing, Bronze impeller, stainless steel shaft with mechanical seal, directly coupled with totally enclosed fan cooled induction motor, 2900 rpm mounted on a M.S. channel base frame including pressure gauge on delivery line with gunmetal isolation cock, suitable vibration elimination pads of approved quality and design, nuts, botls. Each pump shall be suitable for 415 ± 10% volts 3 phase 50 Hz A.C. Electric supply and shall be of the capacity as under: Flow Rate = 4.00 LPS Head = 30 Mtrs. (2 Nos. 1W plus 1S)

Providing, installation, testing and commissioning of stainless steel strainer of dia given below fabricated out of 1.6 mm. thick stainless steel sheet with 3 mm. dia holes with stainless steel flange of following sizes. 150 mm dia

Providing, installation, testing and commissioning of treated water make-up transfer pump to overhead treated water storage tank at roof for treated use. The pump shall have cast iron casing, Bronze impeller, stainless steel shaft with mechanical seal, directly coupled with totally enclosed fan cooled induction motor, 2900 rpm mounted on a M.S. channel base frame including pressure gauge on delivery line with gunmetal isolation cock, suitable vibration elimination pads of approved quality and design, nuts, botls. Each pump shall be suitable for 415 ± 10% volts 3 phase 50 Hz A.C. Electric supply and shall be of the capacity as under: Flow Rate = 4.00 LPS Head = 20 Mtrs. (2 Nos. 1W plus 1S)

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same.

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 40 mm dia

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 150 mm dia

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 200 mm dia,6 mm thick

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 65 mm dia

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 80 mm dia

Providing/Laying P.V.C. / XLPE insulated and P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 3.5C x 120.0 Sq.mm

Providing/Laying P.V.C. / XLPE insulated and P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 3.5C x 25.0 Sq.mm

Refrigerant R 410 gas for excess Copper Piping for all circuits for entire system.

SandF following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.

SITC of Local fire authority approved Vertical multistage Jockey pump with SS Body, SS impellor, SS shaft, mechanical seal coupled with Squirrel cage induction motor for automatic operation suitable for three phase, 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM ,T.E.F.C type confirming to IP:55 with flexible coupling and coupling guard with the pump ,Common bed plate fabricated from mild steel channel , Suitable cement concreat foundation duly plastered with anti vibration pads. 180 LPM suitable for 30 Mtr

SITC of 2 core*1.5sqmm FRLS unarmoured power cable with all accessories complete as required.

SITC of 2CORE 1.5SQMM FRLS FLEXIBLE COPPER CABLE

SITC of 4 loop Multi loop Microprocessor based intelligent and modular, 100% electronically addressable system where field device addressing is done by panel and not user, complete touch screen system with peer to peer networking of 126 network nodes, loop capacity of 200 devices per loop, built in charger and 2x9AH battery which is sealed lead scid rechargable maintenance free type that can support backup upto 24hours idle condition and 15 minutes during alarm condition, with Zonal LEDs on board, capacity to have upto 250 logic zones created, Touch LCD screen display with LED technology, 4 NAC circuits, 3 programmable relays, dedicated Alarm relay, Integral short circuit, Event history on 9999 logs, option to load Logo on the main screen, view live analog level of field devices on the panel screen, option to download these events log and analog level report from panel, 3 detector sensitivity levels, option to change the operating temperature of heat detectors from panel, option to change the volume and tone of loop powered base sounders from panel, Alarm verification option, T1/T2 timer option, field outputs modules programmable with 3 stage program options, have open path programming software, capacity to communicate loop mount repeater panels, optional NAC power supply units that are loop mountable and 100% supervised from main panel.

SITC of Active repeater panel with function keys flike Reset, Alarm Acknowledge, Alarm Silence, Trouble Acknowledge on panel itself etc. as per specification.

SITC of Addressable 2 wire optical Smoke detector, 100% soft addressing, single LED that covers 360Deg lightpipe technology with intensity that can handle upto 5000 Lux, Discreet design for incorporation into any décor, Common mounting base, Drift compensation, Removable detector chamber, Chamber monitoring by panel, option to connect remote indicator.

SITC of Addressable type manual fire alarm boxes (MCP/Pull Station ) shall, on command from the control panel, send data to the panel representing the state of the manual switch and the addressable communication module status. Manual fire alarm boxes shall be constructed of Lexan with clearly visible operating instructions provided on the cover. The word FIRE shall appear on the front of the stations in raised letters, 1.75 inches (44 mm) or larger. etc. as required.

SITC of Addressable Ultraviolet Flame detector 2 wire 3 sensitivity levels, dust proof, damp proof and corrosion proof having IP21 rating. Discreet design for incorporation into any décor, Common mounting base, Drift compensation, Removable detector chamber, Chamber monitoring by panel, option to connect remote indicator.

SITC of Addressable Wall mount or ceiling mount loop powered sounder strober. IP33 rating and sound output of 98DB @ 1 Mt.

SITC of Base mount short circuit isolator, to be used as a detector base. Capability to automatically resume after short circuit is removed, load ability upto 32 devices. Chamber monitoring by panel, option to connect remote indicator.

SITC of following item Advance Lightning Protection System including all necessary fixing accessories and effective connections complying the detailed technical specifications given therein. electronic based lightning protection system working principle on piezoelectric technology, Complying standards like NF C 17-102:2011, EN 50164 and UNE 21.186, Air terminal is made up of stainless steel suitable for every weather conditions Protection radius – 70M

SITC of following ratings Sound Attenuated DG sets comprising of CUMMINS make engine coupled to 415 Phase Stamford make alternator mounted on a common Base frame along with other accessories i.e. Fuel tank, Batteries with leads and with AMF cum synchronisation and load sharing panel. AMF cum synchronisation and load sharing panel

SITC of following ratings Sound Attenuated DG sets comprising of CUMMINS make engine coupled to 415 Phase Stamford make alternator mounted on a common Base frame along with other accessories i.e. Fuel tank, Batteries with leads and with AMF cum synchronisation and load sharing panel. 250 KVA DG SET

SITC of following ratings Sound Attenuated DG sets comprising of CUMMINS make engine coupled to 415 Phase Stamford make alternator mounted on a common Base frame along with other accessories i.e. Fuel tank, Batteries with leads and with AMF cum synchronisation and load sharing panel. 500 KVA DG SET

SITC of Local fire authority approved Diesel Engine driven Pump suitable for automatic operation as per discharge defined beolw consisting of the following details given as A, B, C, D, E and F . (A) Horizontal Single / Multi stage Centrifugal End suction, back pull type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, Butterfly valve on the suction side ( all items to be matching with the suction side dia of the pump) and pressure gauge ,Butterfly valve and non return valve on the delivery side side ( all items to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump (B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal (C)Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head (D) Radiator cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1500 / 1800 RPM, flexible coupling and coupling guard with the Pump, common bed plate for mounting of the Engine and Pump,Antivibration damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically if the Normal electrical supply fails with a unit of battery bank of 12/24v,180 Ah, Lead Acid Battery with Boost / Trickle charger as required for operation of Diesel engine, Exhaust Pipe of suitable diameter minimum 10 M length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumping set, (E) Pump is to be inspected by third party like RITES / PDIL at manufacturer`s premises and inspection report is to be submitted. (F) Suitable cement concreat foundation duly plastered with anti vibration pads. 2280 LPM suitable for 88 Mtr Head, multi stage, 1500 RPM

SITC of pressure switches for Main, Jockey pump and standby Diesel pumps, including necessary wiring upto control panel and Ball valve.

Supply of Hot Dip Galvanised Octagonal steel pole on RCC foundation as per the design of manufacturer considiaring wind pressure and speed, light fixture and pole load, pole shall have weather proof terminal box with in the pole with lockable rigid and vandal resistant hinged metal cover flushed to pole exterior surface and control MCB 10kA `C` curve , power terminals for loop-in and loop-out arrangment of cable terminations, gland plate, the terminal box shall at height of app. 500mm above the base plate, suitable earthing studs shall be provided in side the pole, pole shall be in single section and without any circumferential weld joint, hot dip galvanising shall be as per latest IS: indian standards and coating thickness shall not be less than 70 microns. Pole shall be made out HT steel of grade S355JO, Pole shall have 4Nos. foundation bolts of EN-8 grade and base plate as per IS226/IS 2062. (Foundation and pole installation is not included in this item) Pole and foundation drawings shall be got approved before commencement. Pole shall be inspected at the works of manufacturer.The tests and test certificates shall be provided by the manufacturer. Design of pole shall be in references to IS-875, BSEN 40-3:2000, EN-40-3-3 7Meter long with Single arm (1M size) suitable for required light fixture mounting and with arrangement, Bajaj Cat . BOP-9030 or equivelent approved from the list of makes

Supply and Fixing ISI marked ( IS : 15683 ) Poratable Fire Exitnguisher,Trolley mounted Mech. Foam type capacity 09 ltrs with gun-metal cap and nozzle and complete respects in all respects including initial fill and wall suspension.

Supply and Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. 6 kg

Supply and fixing in position 1000 mm wide 2.0 mm. thick 1100 V grade insulating floor matting with resin bound required adhesive tested for die-electric strength and quality as per BIS-15652:2006 of approved make and ISI marked.

Supply and Fixing ISI marked ( IS : 15683 ) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. min. 600 mm long and complete in all respects including initial fill with C02 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667and wall suspension bracket. Capacity 4.5 Kg.

Supply and Fixing of 1050 mm sweep Make High Speed Ceiling fan with standard down rod, all accessories Electrical connections. Including fixing materials required.as per ECBC and GRIHA compliance

Supply and Fixing of 1200 mm sweep Make High Speed Ceiling fan with standard down rod, all accessories Electrical connections. Including fixing materials required.as per ECBC and GRIHA compliance

Supply and Fixing of 1400 mm sweep Make High Speed Ceiling fan with standard down rod, all accessories Electrical connections. Including fixing materials required.as per ECBC and GRIHA compliance

Supply and Fixing of 900 mm sweep High Speed Ceiling fan with standard down rod, all accessories Electrical connections. Including fixing materials required.as per ECBC and GRIHA compliance

Supply and Fixing of Duct liner/Acoustic (Insulation) of specified thickness of 10 mm of ARMA Duct manafactured as per ASTM E 84 test and which should also meet NFPA 90A supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM C1071, G21, G22) and should emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R - 2.78 in 3.4` thickness) and water vapor permeance of 0.10. Class -0 material with sound absorbing capacity and density 150 Kg/cum.

Supply and Fixing of Fire Man`s Axe with heavy Insulated rubber tested up to 20 KV and confirming to IS :926

Supply and Fixing of signs Auto-Glo, (list of design attached), based on acrylic, single sided wall pasted size 12” x 6”

Supply and Installation of GSS Louvers with bird screen, adjustable damper for fresh air and without damper for exhaust air complete with aluminum wire mesh bird screen in accordance with the approved shop drawings and specifications.

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 13 mm thick

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 6.4mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 12.7 mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 28.6 mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 34.9 mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 41.3 mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 44.5mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 9.5 mm dia

Supply and Installation of Thermal insulation On supply air ducting externally with 13 mm thick Nitrile Insulation with Al. foil having density between 40 to 60 kg/m3 as per approved drawing and specifications. Quoted price shall be inclusive of adhesive, tapes as per specification

Supply and Laying of copper shielded armoured Communication/Control Cabling with end termination between Outdoor Units and Indoor Units, Communication cabling between the individual controllers to the main central controller with PVC conduits or Cable Trays if required, necessary supports, Plug Top, Earthing connection etc. as per site requirement in an approved manner complete as per Technical Specifications and drawing.

Supply and lowering 150 mm dia, PVC pipe `having perforation 10-25 mm size all sides of the pipe in Zig-Zag fashion and making air vent at top including the cost of , Socket etc.

Supply and plantation of trees as per description below including diggging ofpits,plantation of plants ,mixing of gobar manure, and DAP mamure, antitermite, refilling, watering, and maintn. For 3-months Complete as per Specification (Plant must be healthy and well grown, height minimum 3.0 m with 20 cm girth (NS) 06 Butea monosperma PALASH Orange flower 07 Callistemon citrinus BOLLE BRUSH Red 08 Cassia fistula AMALTASH Yellow flower 13 Grevillea robusta SILVER OAK 23 Plumeria alba White flower 31Alstonia Scholarisis tree 35 Delonix Regia Gulmohar

Supply and plantation of Ground cover (N.S) as per details, inclusive of watering, pruning, maintaining for 3 months 01 Lantana slowianan 02 Golden Duranta 03 C- Inermi 04 Irisene 07 Verbina 08 Alternenthera

Supply installation testing and commissioning of 15Watts Horn Speaker for car parking area

Supply installation testing and commissioning of 6Watts Ceiling Speaker.

Supply installation testing and commissioning of 7-zone controller.(Server)

Supply Installation testing and commissioning of Amplifier as per following description AMPLIFIER BREAK UP LOCATION /ZONE WISE First Floor,zone-04, 350W

Supply Installation testing and commissioning of Amplifier as per following description AMPLIFIER BREAK UP LOCATION /ZONE WISE Basement,zone-02, 240 W Basement,zone-01, 240 W Upper Floor,zone-03, 240 W

Supply Installation testing and commissioning of microphone

Supply installation testing and commissioning of system server software.

Supply of G.I tank connecting nipple for connecting tank of 25 mm internal dia with check nuts

Supply of Hedges and Edge Plants (N.S) as per details. Plant must be healthy and well grown, height between 0.8 m to 1.2 m 01Croton 100 03 Clerodedron inerme 04 Tabernae montana 100 06 Bauhinia acuminata 100 07 Murraya ( Kamini ) 120 10 Golden Duranta

Supply of iron J- hook complete in all respect

Supply, testing and commissioning of 120 W LED, IP-65/66 integral Street light fitting, pressure die-cast aluminium housing, powder coated light fitting complete with LEDs, total lumen out put shall not not less than 10100 lumens , heavy duty driver, THD less than 10%,100V-265V single phase AC system, surge protection, totally enclosed with toughened glass cover, pole mounting arrangement etc and as per specifications, complete as required Make: Bajaj, Phillips or Eq.

Supply, testing and commissioning of 90 W LED, IP-65/66 integral Street light fitting, pressure die-cast aluminium housing, powder coated light fitting complete with LEDs, total lumen out put shall not not less than 9000 lumens , heavy duty driver, THD less than 10%,100V-265V single phase AC system, surge protection, totally enclosed with toughened glass cover, pole mounting arrangement etc and as per specifications, complete as required As per Goldwyn Cat Ref: XS 04 18 New -90W, Bajaj Ref: EDGE (BRTFG) Series, Philips Ref: BRP322 LED (7000-12500lm) or Eq. approved as per list of approved makes

Supply, fabrication, Installation and testing of flexible connections constructed of flexible double canvas sleeve with necessary mounting arrangement, flanges, nuts and bolts etc. in accordance with approved shop drawings and as per the specifications

Supply, fabrication, Installation and testing of flexible connections constructed of flexible double canvas sleeve with necessary mounting arrangement, flanges, nuts and bolts etc. in accordance with approved shop drawings and as per the specifications.

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 22 G galvanized sheet steel

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 24 G galvanized sheet steel

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 20 G galvanized sheet steel

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 18 G galvanized sheet steel

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 20 G galvanized sheet steel

Supply, Installation , Testing, Commissioning and Handling over of 13 Passenger Elevator (Not less than 884 kg) Gear less elevator having speed of 1 meter per second Serving different floors in the existing lift shaft as per specification of the tender document complete in all respect as per Satisfaction of Engineer-in-charge including obtaining permission from concerned Govt regulatory/ authority

Supply, Installation and Balancing of opposed blade box type volume control dampers in Supply air duct collars as per approved drawings and specifications.

Supply, Installation, testing and balancing of Supply Air Duct dampers fabricated from G.I Sheet, duly painted with synthetic enamel paint and to be provided with suitable links and quadrants for control of volume of air. in accordance with the approved shop drawings and specifications.

Supply, Installation, Testing and Commissioning of IP Network TDN Low-Light IR Bullet/ Box Camera, 1/2.7` CMOS, 2 MP @ 25fps or better, triple stream, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 5–50 mm motorized focus and zoom lens, BLC, HLC, 3DNR, Privacy Mask, 4 IR LEDs Smart IR with upto 60m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S and Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 and EN 55022) , FCC Part 15 and RoHS compliant. Make Honeywell or Pelco or Axis

Supply, Installation, Testing and Commissioning of IP Network TDN Low-Light IR Long PTZ Camera with Wiper and auto tracking, 1/1.9` CMOS, 2 MP @ 25fps, triple stream, Min. Illumination required 0.005 lux @ F1.6 (color) and 0.0005 lux @ F 1.6(B/W), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 6mm –180 mm 30x motorized focus and zoom lens, BLC, HLC, 3DNR, Defog, Electronic Image Stabilitzation, Privacy Mask, IR range with upto 150m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 7 In/ 2 out, PoE, H.264 High Profile and MJPEG, PoE Class 5 and 12V DC/24VAC, IP 67, Speed Controlled Wiper for cleaning rain water and dust,Having Operating temp range : –40°C to 70° C. Certifications: ONVIF Profile S compliant, UL, CSA 60950-22, CE (EN 50130-4 and EN 55022) , FCC Part 15 and RoHS compliant.Make Honeywell or Pelco or Axis

Supply, Installation, Testing and Commissioning of IP Network TDN Low-Light IR Rugged Dome Camera, 1/2.7` CMOS, 2 MP @ 25fps or better, triple stream,Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 7–22 mm motorized focus and zoom lens, BLC, HLC, 3DNR, Privacy Mask, 3 IR LEDs Smart IR with upto 50m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S and Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 and EN 55022) , FCC Part 15 and RoHS compliant. Make Honeywell or Pelco or Axis

Supply, installation, testing and commissioning of Multimedia Projector with LCD Technology, Brightness : 3000 ANSI Lumens or higher, Min Resolution : XGA, Short Throw Lens, Contrast Ratio: 3000:1, Lamp Life : 10000 Hrs (Eco Mode) Sharp/ Jteson/ Leviton

Supply, installation, Testing and Commissioning of Armourd cat-6 UTP cable with all accessories complete as required.

Supply, installation, testing and commissioning of Box type LED Tube Light fixture made of Alluminium sheet channel 22 watts High efficiency 1900 lumens and high frequency replacable digital ballast. Make: Crompton Greaves/Wipro/Bajaj/Phillips

Supply, Installation, Testing and Commissioning of Constant Airflow Regulator (CAR) as specified suitable for : 150 CFM - 250 CFM

Supply, Installation, Testing and Commissioning of Constant Airflow Regulator (CAR) as specified suitable for : 50 CFM - 100 CFM

Supply, installation, testing and commissioning of cubicle type compartmentalized floor mounted free standing with separation system as per IS:8623 part 1 for 415V, 50HZ, 3phase 4 wire AC supply, moisture, dust and vermin proof IP-42, L.T.Panel boards, made out from 2mm thick CRCA sheet steel duly epoxy powder coated (by seven tank process ) in approved colour, complete with interconnections / control/ power wiring with FRLSH copper conductor wires and 2A SP MCBs for control circuits ,communicable meters shall be with software, high conductivity Aluminium bus bars, earth bus,Bus bar supports, removable 3mm thick gland plates on top and bottom, M.V. danger notice plate , louvers and following incomer and outgoing feeders (outgoings will be with ON indication with 2A control MCB) complete as per specifications and drawings : Main LT PANEL With SYNCHRONIZATION PANEL

Supply, installation, testing and commissioning of following type of LED/CFL fixtures including all fixing accessories, ballast/driver as required. All fixtures shall be supplied with lamps.Make: Crompton Greaves/Wipro/Bajaj/Phillips 15 Watts recessed mounted LED circular down lighter complete as required with minimum 1400 Lumens output

Supply, installation, testing and commissioning of following type of LED/CFL fixtures including all fixing accessories, ballast/driver as required. All fixtures shall be supplied with lamps.Make: Crompton Greaves/Wipro/Bajaj/Phillips 30 Watts recessed mounted LED circular down lighter complete as required with minimum 2800 Lumens output

Supply, installation, testing and commissioning of following type of LED/CFL fixtures including all fixing accessories, ballast/driver as required. All fixtures shall be supplied with lamps.Make: Crompton Greaves/Wipro/Bajaj/Phillips 10 Watts recessed mounted LED circular down lighter complete as required with minimum 840 Lumens output

Supply, installation, testing and commissioning of following type of LED/CFL fixtures including all fixing accessories, ballast/driver as required. All fixtures shall be supplied with lamps.Make: Crompton Greaves/Wipro/Bajaj/Phillips 36 Watts recessed mounted LED circular down lighter complete as required with minimum 3600 Lumens output

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 1.5 TR /860 CMH Hi-wall Split Unit (Including cordless remote controller)

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 2 TR / 780 CMH Hi-wall Split Unit (Including cordless remote controller)

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 2 TR/1031 CMH Cassette Unit (Including cordless remote controller)

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 2.5 TR/1236 CMH Cassette Unit (Including cordless remote controller)

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 5.5 TR/3595 CMH Ductable Unit

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 8.0 TR/3595 CMH Ductable Unit

Supply, Installation, Testing and Commissioning of Industrial grade HUS Network Video Recorder : 64CH @ 1080P / 64CH @ 720P HUS NVR, Upto 12 HDD bays with 48TB, RAID 0,1,5,6,10:Hot Swap, 1 SAS, 2 1000M Ports, ONVIF, N plus 1 Redundancy, NFR with Camera, Dual Power, Dual Ethernet Port, 1Gbps throughput Make Honeywell or Pelco or Axis

Supply, installation, testing and commissioning of Layer 2 ,24 Port 10/100/1000 Base T POE plus and 2 no of 2G Fiber Port,Manageable Switch with POE budget of 75W with SFP Module Cost, inclusive of LIU and LC couplers, plates, mounts, etc required for commissioning Make Cisco/ Allied/ D-Link/ Enterasys

Supply, installation, testing and commissioning of R410/R407Condensing unit of 8.5 TR.

Supply, Installation, Testing and Commissioning of UL listed Fire and smoke dampers with actuator, transformer, Panel for the size given under Upto 0.3 sqm

Supply, Installation, Testing and Commissioning of UL listed Fire and smoke dampers with actuator, transformer, Panel for the size given under Upto 0.3 sqm to 0.6 sqm

Supply, installing, testing, commissioning and handing over of Inline Fans with necesssary cabling : 1000 CFM, 20 mm SP

Supply, installing, testing, commissioning and handing over of Inline Fans with necesssary cabling : 550 CFM, 20 mm SP

Supply, installing, testing, commissioning and handing over of Inline Fans with necesssary cabling : 700 CFM, 20 mm SP

Supply, installing, testing, commissioning and handing over of Propeller Fans with necesssary cabling : 200 CFM

Supply, testing and Commissioning of low intensity avaition ostruction LED light having 35cd in any direction (red color),single emitter, cast aluminium housig, weather proof IP-65, painted with corrosion resistant paint, covered by hard ABS red cover dome, with mounting pole and other accessories as required

Supply,, Installation, testing and commissioning of Compact Air Cooled type outdoor units of VRV system having hermetically sealed scroll type compressors and separate 1# inverter compressor, condenser coil fabricated from Seamless Copper tube and Plate type Al. Fins of Multi Row with “Anti Corrosive” treatment (Blue Fins), Axial Flow, upward throw condenser fan, Condenser fan - motor unit, insulated refrigeration piping, power / control wiring, and earthing, external wiring between Indoor and Outdoor units, all system controls-safety. The outdoor unit shall be pre charged with first charge of R 410A refrigerant. etc. complete as per Technical Specifications and drawing. Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector and Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection. 26 HP

Supply,, Installation, testing and commissioning of Compact Air Cooled type outdoor units of VRV system having hermetically sealed scroll type compressors and separate 1# inverter compressor, condenser coil fabricated from Seamless Copper tube and Plate type Al. Fins of Multi Row with “Anti Corrosive” treatment (Blue Fins), Axial Flow, upward throw condenser fan, Condenser fan - motor unit, insulated refrigeration piping, power / control wiring, and earthing, external wiring between Indoor and Outdoor units, all system controls-safety. The outdoor unit shall be pre charged with first charge of R 410A refrigerant. etc. complete as per Technical Specifications and drawing. Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector and Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection. 30 HP

Supply,, Installation, testing and commissioning of Compact Air Cooled type outdoor units of VRV system having hermetically sealed scroll type compressors and separate 1# inverter compressor, condenser coil fabricated from Seamless Copper tube and Plate type Al. Fins of Multi Row with “Anti Corrosive” treatment (Blue Fins), Axial Flow, upward throw condenser fan, Condenser fan - motor unit, insulated refrigeration piping, power / control wiring, and earthing, external wiring between Indoor and Outdoor units, all system controls-safety. The outdoor unit shall be pre charged with first charge of R 410A refrigerant. etc. complete as per Technical Specifications and drawing. Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector and Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection. 40 HP

Supply,Installation, testing and commissioning of water cooler (storage type ) fully stainless steel of 150/150 ltrs capacity as per IS standards with all accessories. as per site requirment suitable for operation on 230 V plus /- 10% , 50 Hz, single phase AC supply complete as reqd. Make Blue Star/ Sidwal/ Usha etc. The work includes PVC connection, control cable with plug top, drain pipe by making hole and chase cutting wherever it required as per site and repair the same with original finish etc as reqd

Supplying and fixing, installing and commissioning Automatic Boom Barriers for efficient security at exit and entry points with electrical control panels and sensors for auto access controls thru push button and manual operation in case of power failure : Boom length 6.0 m , torque 600 Nm of make Godrej or equivalent , complete in all respects

Supplying and Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG GI Wire

Supplying and fixing Fire Brigade Connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following way : 2 Way (for Drawout )

Supplying and fixing Fire Brigade Connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following way : Supplying and fixing Fire Brigade Connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following way :

Supplying and fixing 12 mm thick multiwall polycarbonate sheet roof cladding/ MS sheet at all levels as per pattern for skylight roof cladding and specials with supply and fixing of structural frame of MS tubular trusses as per shop fabrication details and necessary aluminium extrausions with EPDM gasket, cutting fabricating erection at all levels with painting , , shop drawings and approvals , scaffolding, fixing , laid as per architectural profile , drainage, water proofing (N.S)

Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia male and female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required.

Supplying and fixing air vessel of continuous welded construction for pump room made of 450 mm dia,fabricated out of 10 mm thick dished ends and 8 mm thick MS sheet, 2000 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun Metal wheel valve, with required accessories, pressure gauge and painting with two coats of Red Oxide and two coat of post office red enamel paint as required.

Supplying and fixing first -Aid hose reel wall mounted swinging type with MS construction spray painted in post office Red, conforming to IS 884 with upto date amendments, complete with the following as required.(A) 30 m long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Type -2 as per IS: 12585 (B)20 mm (nominal internal) dia gun metal globe valve and nozzle.(C)Drum and brackets for fixing the equipments on wall.(D) Connections from riser with 40 mm dia stop valve (gun metal) and M.S. pipe

Supplying and fixing Gun metal single headed Internal / external yard hydrant valve with 1 No. 63 mm dia instantaneous Gun metal coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

Supplying and fixing of Hose Cabinet of size 750 mm x 600 mm x 250 mm made of 1.6 mm thick MS sheet with 6 mm thick glazed glass doors including necessary locking arrangement suitable to accommodate external hydrant with butterfly valve, 2 Nos 15 Mtr. Long Hose pipe, 1 No. branch pipe, mounted on wall OR raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Supplying and fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze /gun metal seat ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 780 of following sizes as required.

Supplying, testing and commissioning of 1400 RPM, 300MM size heavy duty exhaust fan with mounting frame, complete with copper wound motor etc. as req. as per ECBC and GRIHA compliance 400mm Sweep

Supplying, Installation, Testing and Commissioning submersible type dewatering pump of stainless steel / Noryl casing and impellor of discharge and head given below complete with base plate and all accessories suitable for operation on 230 V, single phase/415 V /3 phase, 50 Hz. AC supply complete with starter for automatic operation including water level sensing device / float switch inter connection with submersible cable etc. as required. 180 LPM with 10 mtr head

Supplying, Installing, Testing and Commissioning of extruded aluminum powder coated exhaust grilles 0/15/45 degree blade angle of approved shade and make as per specifications including any framework required for fixing of linear grilles.

Supplying, testing and commissioning of 1400 RPM, 300MM size heavy duty exhaust fan with mounting frame, complete with copper wound motor etc. as req. as per ECBC and GRIHA compliance 230 mm Sweep

Ultrakey Lite, Maxpro Control keyboard with function key, joystick, LED display Make Honeywell or Pelco or Axis

Bidder Name

Amount

Ashok Kumar Garg(GSTN-06ABTPG1118P1ZC)

M/s Tech Sphere Infrastructures(GSTN-06AQAPS2700D2ZE)

Krishna Construction Co(GSTN-06AALFK6441Q1ZP)

Ashok Kumar Garg

Krishna Construction Co

M/s Tech Sphere Infrastructures

Krishna Construction Co