Special Repair to certain SMQs of NCS(E) at AF Stn Sirsa

Amount

SCHEDULE 'A' PART-I (B/R PORTION)

Demolition Cement Concrete (un-reinforced) in Toilet Floors, Sunken Floors including taking out PCC of any description and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from Item No. 3 here-in-before) including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in CM 1:6, complete all as specified and as directed.

M&L Cutting Holes in Brick Walls, not exc. Half Brick built in Cement Mortar for inserting of Cooler Stand, Lugs, GI Tubing and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or CM 1:3 (as required) and adjoining Surfaces in CM 1:4, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Sqm Each, complete all as specified and as directed.

Taking down Pressed Steel Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Sqm Each, complete all as specified and as directed.

Taking down shutter of any description, area exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified.

S&F Pressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

M&L Factory Made Panelled Shutter 35mm thick of Second Class Hardwood with Panels of 12mm thick Veneered Particle Board medium density wood with commercial face veneered both side and fitted to Chowkats, having size of Rail and Stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

M&L factory made skeleton shutter 35mm thick of second class hardwood prepared to received Guage/Glass (without sash bars) fixed with mitred beeds supplied and fitted to chowkhat and securing glass, guage, etc sizes of members of shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50x47 mm made out of 5.0mm plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening, complete all as specified and as directed.

M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/fixing with and including Stainless Steel Hinges, complete all as specified and as directed. Note: Stainless Steel Hinges will be Measured and Paid under appropriate Item.

Taking down Steel Window, Ventilator Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, not exc. 1.00 Square Metre Each, complete all as specified and as directed.

Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description incl Guard Bars/ Grill, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each complete all as specified and as directed.

M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. Note :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed

S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.

S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt having length of 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F Butt hinges,100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised , type B-21 and fixed, complete all as specified and as directed.

S&F Cold Rolled Mild Steel Butt Hinge 100mm long medium weight and fixed, complete all as specified and as directed.

S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.

S&F Aluminium Handle 100mm long (weight not less than 80 Gram), Cast type, anodised, complete all as specified and as directed.

S&F Mild Steel 150mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

S&F In repair stainless steel Curtain Rod 32mm dia (as approved) including Pair of bracket not less than 50 mm long for holding Curtain Rod & including a pair of Side Dome and to be fittied/tightened on Curtain Rod 32 mm dia with Screws, complete all as specified and as directed.

M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed

Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.

Taking down existing Water Proofing Treatment including existing Plaster of Sunken Floors/ Walls, etc. including raking out joints, hacking for key, scrubbing down with water and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

M&L applying Flexible Water Proofing & Protective coating on Floor and Walls of Sunken portion, using Dr. Fixit Pidifin 2K (Two Pack Cementitious Waterproof Coating), comprising with the following :- (a) Rendering 15mm thick on Brick, Concrete surfaces in CM 1:4, finishing plastered surfaces Even and Smooth without using Extra Cement. (b) Applying Two Coats of Dr. Fixit Pidifin 2K @ 1.50 KG/SQM Each Coat on dried Plastered surfaces by a Masonary Brush or an appropriate Powder Spray equipment. Second Coat shall be applied when the First Coat is completely dried.

M&L for cement concrete 1:5:10 type E-2 ( using 40 mm graded stone aggregate) in sunken portion of slab, complete all as specified.

M&L for 6.0mm thick Non-asbestos Fiber Cement Building Boards, fixed to Walls with Rawl Plugs and Steel Screws,including taking down and preparation of surface, complete all as specified and as directed.

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, type D-2 (40mm graded stone aggregate) 75mm thick as in Fillings, Sub-base to Floors, etc. complete all as specified and as directed.

M&L Cement Concrete 1:2:4, type B0 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles in Floor, complete all as specified and as directed.

M&L Cement Concrete 1:2:4, type B1 (20mm graded stone aggregate) 25mm thick as in Flooring, finishing Cement Concrete Surfaces even and fair complete all as specified and as directed.

M&L Cement Concrete 1:2:4, type B1 (20mm graded stone aggregate), 40mm thick, as in Flooring, finishing Cement Concrete Surfaces Even and fair, complete all as specified and as directed.

M&L Cement Concrete 1:3:6, type C2 (40mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, complete all as specified and as directed.

Demolition Cement Concrete (Reinforced) of Beams, Staircases, Landing, Chajjas and similar Suspended Work (Reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

M&L RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate for Slab supported wall, column , kitchen counter slab, shelves,chajjas including form work complete all as specified. (NOTE: MS reinforcement shall be measured seperately)

M&L MS TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking bending sprirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L Framed work such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted for Framed cooler stands and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

M&L Cement Concrete 1:2:4, type B1 (20mm graded stone aggregate) as in Coping,Holdfast, Bed Block, including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L Cement Concrete 1:3:6, type C1 (20mm graded stone aggregate) as in Filling Back side of Pressed Steel Frame, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Non-skid Coloured Ceramic Tiles 7 to 8.0 mm thick (Square/ractngular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Flooring, set and jointed in Neat Cement Slurry and pointed in White Cement, laid over and including Screed Bed 15mm thick in CM 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L Coloured Ceramic joint free floor tiles 7 to 8.0mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in Neat Cement Slurry and pointed in White Cement, laid over and including Screed Bed 15mm thick in CM 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L Coloured Ceramic floor Tiles 7 to 8.0mm thick , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skirting (depth not more than 150mm) etc., set and jointed in Neat Cement Slurry and pointed in White Cement, fixing over and including rendering 10mm thick in CM 1:4, complete all as specified and as directed. (NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate)

M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, etc., set and jointed in Neat Cement Slurry and pointed in White Cement, laid over and including 10mm thick rendering in CM 1:3, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L for Ceramic Floor (Paver) Tiles 300x300x9.0 to 10mm, highly abrasive, Anti-skid, Impact Resistance, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

Dismantling Stone Slabs of any description or thickness in Floors, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Machine cut Granite Stone Slab (Black in colour) 16-18mm thick, fixed on Kitchen Platform, laid over and including Cement Screed 15mm thick in CM 1:4, cutting and Granite Polishing using White Cement in Joints including rounding Edge of Stone Slab on One Edge, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Machine cut Granite (of any type) Tiles 16-18mm thick machine cut, in skirting/dado laid over cement screed 10mm thick in CM 1:4 and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Machine cut Kota Stone Slab 18-20mm thick in Flooring,tread of staircase laid over 20mm thick Screed base in CM 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Machine cut Kota Stone Slab 18-20mm thick in Riser of Steps, Skirting, laid over 10mm thick backing coat of CM 1:4 and joined with grey Cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Rendering (Internal) 12mm thick in CM 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement,including taking down existing plaster, complete all as specified and as directed.

M&L Rendering 5.0mm thick in CM 1:3 on Concrete Surfaces as in Ceiling, etc.,Plastered Surfaces finished Even and Smooth, without using Extra Cement,including taking down existing plaster, complete all as specified and as directed.

M & L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces including taking down of existing plaster complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".

Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even,including taking down existing plaster, complete all as specified and as directed.

M & L for repairing of RCC projection, chajja, roof facia, column etc by necessary preparation ie scraping, cutting, chiseling and cleaning exposed reinforcement, surfaces of damaged, loosed RCC surfaces and applying rust remover with brush by complete wetting the rusted material surface by rust remover & leaving for 24 hrs and thereafter surface preparation of coated bars and applying 2nd coat of rust remover & leaving the same for the specific period as per manufacturers instructions, then applying one coat of cement slurry and filling the surface with cement concrete 1:1.5:3 using 12.50mm graded stone aggregate and reinforced with Standard Expended metal mesh (XPM) (Diamond size 22.58x50.80mm) using coarse sand in patches area, Surfaces to be finished even and smooth without using extra cement incl applying a Coat of Chalk Whiting (as Preparatory Treatment) and applying Two Coats of Weather Coat Exterior Paint over a coat of cement primer with approved Tint as per manufacturer's instructions compete all as specified and directed. Make:- Sika Rustoff 100/ Fosroc Rebacklens/ BASF Emaco S420 Note:- (i) Site for application is at various locations in patches and height varies up to 12M. (ii) Proper stable Scaffolding is must for working for the safety of resident of bldg and worker. Cost of all types of formwork, scaffolding and welded mesh shall deemed to be included in quoted rate.

M&L preparing newly Plastered surfaces of Ceiling including cornices etc. and applying Three Coats of White Wash, complete all as specified and as directed.

M&L preparing new Plastered surfaces of Walls by applying Wall Care Putty 1.5 mm thick including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of weather proof exterior emulsion paint of approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing newly Plastered surfaces of Walls upto double storey by applying wall putty 1.5mm thick cutting/rubbing to obtained a Smooth Surface and applying Two Coats of weather proof exterior emulsion paint of approved tint over a coat of primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of ceiling complete all as specified and directed.

M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Acrylic Distemper, complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of walls including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coat of white wash on old surface of walls complete all as specified and directed.

M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.

M&L preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

Supply and laying 15 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, including taking up or down,stacking properly at site, complete all as specified and direced.

Refixing Steel Tubing 15mm bore (dia) and Fittings in new or old position, (Serviceable Pipes and Fittings obtained from Item No. 78 here-in-before) after cleaning inner and outer surfaces of Pipes by using of Wire Brush including provision of new GI Fittings (as required), including taking up or down,complete all as specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings , fixed on Walls, Ceiling or concealed laid in Floors ,including taking up or down,stacking properly at site, complete as all specified and as directed.

Refixing Steel Tubing 20mm bore (dia) and Fittings in new or old position, (Serviceable Pipes and Fittings obtained from Item No. 80 here-in-before) after cleaning inner and outer surfaces of Pipes by using of Wire Brush including provision of new GI Fittings (as required),including taking up or down, complete all as specified and as directed.

S&F in repair Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Long Body with Capstan Head with Wall Flange, screwed down, screwed for Iron Pipe , complete all as specified and as directed.

S&F in repair Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body with Capstan Head including flange, screwed down, screwed for Iron Pipe, complete all as specified and as directed.

S&F in repair Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with long screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed.

S&F in repair Stop Cock 15mm bore (dia), Cast copper alloy, Chromium Plated, , high pressure,screwed both ends for iron pipe ,Fancy type, Body with Capstan Head including flange, complete all as specified and as directed.

S&F in repair Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type including flange, screwed down, high pressure, screwed both Ends for Iron Pipe, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule including dismantling/ lowering down U/s Water Storage Tanks, complete all as specified and as directed.

S&F 20 mm bore Ball brass valves, high pressure, with HDPE float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-152 or equivalent model in JEXON / POLYTUF / SHAKTI)

S&F in repair Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces, complete all as specified and as directed. (MAKE : CERA, Cat No: S3010109 / HINDWARE, Cat No. 20042 / PRAYAG, Cat No: 4054 / ASIAN PAINTS, Cat No: WM-32-X)

M&L in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in CM 1:3 , complete all as specified and as directed. (Make : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model: Corona /ASIAN PAINTS, Model: TREND)

S&F in repair Vitreous China Wash Hand Basin 450x300mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in CM 1:3 , complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)

S&F in repairs Brass Chromium Plated Over Head Shower Rose 70mm (2½") with 235mm (10½") long Shower suitable for fixing 15mm bore (dia) Pipe including Flange, complete all as specified and as directed.

S&F in repair Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets, complete all as specified and as directed. (Make: Jainko, Cat No: TRJ-2, Prayag, Cat No: BA-1S, ESS ESS, Cat No: SW-101, Essco, Cat No : AEC-1111N)

S&F in repair Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror,complete all as specified and as directed.

S&F in repairs Glass Shelf (Bath Tray) with CP bracket and railing 45x15 Cm in size, complete all as specified and as directed. (Make: Jainko, Pearl, Prayag, Essco)

S&F in repair Corner Glass Shelf single Decker (Triangular shape) of size 30 Cm with bracket, complete all as specified and as directed. (Make: Jainko, Pearl, Prayag, Essco)

S&F in repair Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges and fixed, complete all as specified and as directed. (Make: Jaquar, Cat No: CON-309KNM, Prayag, Cat No.- 9255, Parryware, Cat No: G4736AI)

S&F in repairs Sink with Drainage Board made of Stainless Steel 1.0mm thick for Kitchen overall size 915x460mm having Bowl size 400x350x205 mm with Plugs, Washers and Wastes, PVC Waste Pipe 40mm bore (dia) of suitable Length, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe, complete all as specified and as directed. (Make: Prayag, Cat No-1239D, Neelkanth, Cat No-NKSBSD5M, Jainko cat No-SSJ-8)

S&F in repair PVC Multi Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate), complete all as specified and as directed.

S&F in repair PVC Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate), complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls, complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls, complete all as specified and as directed.

S&F in repair PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement , complete all as specified and as directed.

S&F in repair PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed.

S&F in repair PVC (SWR) junction single (single T) equal or unequal of 75 mm bore, complete all as specified and as directed.

S&F in repair PVC (SWR) junction single (single T) equal or unequal of 110 mm bore, complete all as specified and as directed.

S&F in repair PVC (SWR) vent cowl of 110 mm bore, complete all as specified and as directed.

M&L Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall, complete all as specified and as directed.

M&L Running Welding Work exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete all as specified and as directed.

M&L built in steel cup board complete with pressed steel frame of size 75x45x1.25 mm thick with pressed steel shutter 1.00 mm godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm thick flat iron incl MS hanging rod of 10mm dia with bracket fixed on inner side of cup board shutter and on other leaf provision of MS peg set of 03, shleves,locking arrangement,including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around steel surfaces of frame and shutter including taking down old existing wooden cup board and making good disturbed portion in CM(1:3) or PCC 1:2:4 all as directed .

S&F Coloured PVC Board Scratch and strain free (weight not less 9 Kg/Sqm ) in Door, Shelves for Kitchen Cabinets, one side plain & other side laminated (Wood Grain Finish) , 18/19mm thick as required, jointed to form cabinet by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & fixing of Stainless steel L shaped hinges suitable for 18/19 mm PVC Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter) and Door catcher (01 no for each leaf), complete all as specified and as directed. NOTE: Quoted unit Rates are inclusive of PVC board, handles, hinges, screws, Door catcher and adhesive etc. Make : Rajshree, Centuryply, sintexplastic

S&F in repair of Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel 1.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws, complete all as specified and as directed.

Dismantling of bricks (laid flat or on edge) or brick tiles laid dry and pointed in any mortar in floors,over roof surfaces etc. in each layer complete all as specified and directed.

Demolition of mud in roofs any thickness and stripping out/ taking down old existing tarfelt from any type of roof including plaster/screed bed and removal of debris outside MOD land and disposed off complete all as specified and directed.

M&L for PCC 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in padding over roof slab laid to slope finished even and smooth, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane. (v) Sealing of all angles & abutments upstands with extra care to ensure perfect bondage. Sealing of edges well into grooves & protect the seal with a polysulphide/polyurethane sealant.

M&L mild steel Framed work such as framed guard bars; ladders; railings; and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".

SCHEDULE 'A' PART-II (E/M PORTION)

Taking down Copper/Aluminium Point Wiring any type in PVC casing caping /PVC Conduit (Light, Fan, Socket or Power) including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fittings of any description and Making Good Disturbed Surfaces of Walls, Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing PVC Gang Box (minimum 2.0mm thick)/Sunk Mild Steel Pressed Terminal Box (1.6mm thick) of suitable size( as required) duly painted with Red Oxide Metal Primer with 2.0mm thick Plastic Laminated Sheet Top Cover (as per Site requirement) for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/FAN POINT/ BELL POINT CONTROLLED BY ONE 1-WAY SWITCH 6 AMP, complete all as specified and as directed.

Ditto as item No 124 but for ONE 5 PIN SOCKET OUTLET 6 AMP ON INDEPENDENT BOARD, complete all as specified and as directed.

Ditto as item No 124 but for ONE 5 PIN SOCKET OUTLET 6 AMP ON THE SAME BOARD, complete all as specified and as directed

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing PVC Gang Box (minimum 2.0mm thick)/Sunk Mild Steel Pressed Terminal Box (1.6mm thick) of suitable size( as required) duly painted with Red Oxide Metal Primer with 2.0mm thick Plastic Laminated Sheet Top Cover (as per Site requirement) for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT CONTROLLED BY 2-WAY SWITCH 6 AMP, complete all as specified and as directed.

M&L Point Wiring with 4 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 4 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing PVC Gang Box (minimum 2.0mm thick)/Sunk Mild Steel Pressed Terminal Box (1.6mm thick) of suitable size( as required) duly painted with Red Oxide Metal Primer with 2.0mm thick Plastic Laminated Sheet Top Cover (as per Site requirement) for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE SOCKET 6 PIN CONTROLLED BY ONE 1-WAY SWITCH 16 AMP, complete all as specified and as directed.

S&F Sub-main Wiring with 2-Runs of 10.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 10.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Cable along with the Wiring drawn in including PVC CONDUIT of 25mm size complete all as specified and as directed. (NOTE : Three runs of single core 10.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

S&F Switch Piano 6 Amp, Flush type, Single Pole, 1-way , complete all as specified and as directed.

S&F Switch Piano 6 Amp, Flush type, Single Pole, 2-way, complete all as specified and as directed.

S&F Switch Piano 16 Amp, Flush type, Single Pole, 1-way , complete all as specified and as directed.

S&F Socket Outlet 6 Amp, Piano, Flush type, 2-in-1, multi-purpose, 5 Pin and Fixing-in-repairs, complete all as specified and as directed.

S&F Socket Outlet 16 Amp, Piano, Flush type, 2-in-1, multi-purpose, 6 Pin and Fixing-in-repairs, complete all as specified and as directed.

S&F Bell Push Button 6 Amp, Flush type suitable for Call Bell, complete all as specified and as directed.

S&F Call Bell Electric Single Pole, 230 Volt, AC supply, Ding Dong type and , complete all as specified and as directed.

S&F fan Regulator 120 watt, complete all as specified and as directed.

S&F Ceiling Rose, 3 Terminals, PVC Polycarbonate, Isolated body and Fixing-in-repairs, complete all as specified and as directed.

S&F Slim linear LED lightening fixture 20 watt LED batten T5, with full base of extruded aluminium section as acting as a heat sink with closed back, isolated driver, CRI>70, PF>0.9 system efficacy >100 lm/watt, operating voltage 170-240 volts, colour Temp 6500K, low heat generating LED ( Make of LED shall be Cree/Nechia/Osram) complete all aconnection required using 1.5 sqmm copper conductor multistrandedpvc unsheathed 2 core flecible cable from ceiling rose to fitting complte all as required and directed. Note- (i) The contractor shall obtain LM 79 & LM 80 reports for thelight fittings from manufacturer for the lotto be supplied and submite to department (ii) Any touch up of the wall surface due to changing of fitting shall be done by contractor with similar surfavce finish without extra cost to the department. (Make- Havells (E-lite) LED Pride Plus (Cat No- LHEXBLP7PN1W020) or equivalent make in Philips / BAJAJ /CROMPTON)

S&F Slim linear LED lightening fixture 05 wattLED batten, with isolated driver, CRI>70, PF>0.9 system efficacy >100 lm/watt, operating voltage 170-240 volts, colour Temp 6500K, low heat generating LED ( Make of LED shall be Cree/Nechia/Osram) complete all aconnection required using 1.5 sqmm copper conductor multistrandedpvc unsheathed 2 core flecible cable from ceiling rose to fitting complte all as required and directed Note- (i) The contractor shall obtain LM 79 & LM 80 reports for thelight fittings from manufacturer for the lotto be supplied and submite to department (ii) Any touch up of the wall surface due to changing of fitting shall be done by contractor with similar surfavce finish without extra cost to the department. Make- Havells ( E-lite) LED Pride Plus(Cat No- LHEXBLP7PN1W005) or equivalent make in PHILIPS / BAJAJ / CROMPTON)

S&F Slim linear LED lightening fixture 9/10 wattLED batten,2 ft with isolated driver, CRI>70, PF>0.9 system efficacy >100 lm/watt, operating voltage 170-240 volts, colour Temp 6500K, low heat generating LED ( Make of LED shall be Cree/Nechia/Osram) complete all aconnection required using 1.5 sqmm copper conductor multistrandedpvc unsheathed 2 core flecible cable from ceiling rose to fitting complte all as required and directed Note- (i) The contractor shall obtain LM 79 & LM 80 reports for thelight fittings from manufacturer for the lotto be supplied and submite to department (ii) Any touch up of the wall surface due to changing of fitting shall be done by contractor with similar surfavce finish without extra cost to the department. (Make- Havells ( E-lite) LED Pride Plus (Cat No- LHEXBLP7PN1W09) or equivalent make in PHILIPS / BAJAJ / CROMPTON)

S&F 10 watt LED Bulk Head , IP66 protection, surface mounted, hexagonal type, backlit LED luminare CRI>70, PF>0.9 system efficacy >100 lm/watt, operating voltage 170-240 volts, colour Temp 6500K, low heat generating LED ( Make of LED shall be Cree/Nechia/Osram) complete all aconnection required all as required and directed Note- (i) The contractor shall obtain LM 79 & LM 80 reports for thelight fittings from manufacturer for the lotto be supplied and submite to department (ii) Any touch up of the wall surface due to changing of fitting shall be done by contractor with similar surfavce finish without extra cost to the department. Make- Havells (HEXA 10W) Cat No: HEXAFT10WLED857SSYMBOPC or equivalent make in PHILIPS / BAJAJ / CROMPTON)

S&F wall light/fixture, stainless Steel brushed nickle finish fixture with opal Glass diffuser suitable for 9 watt LED lamp B22 Base complete all type of fittings complete all as required and directed. (Make- Havells (Florentine WL 1LS B22 SS) Cat No-LHFOAJE1TZ1I060 or equivalent make in Havells (Venza) /Wipro/Phiips/Crompton) Note : Any touch up of the wall surface due to changing of fitting shall be done by contractor with similar surfavce finish without extra cost to the department.

S&F MCB Single Pole, 6 to 32 Amp, 240 Volt, AC, 'C' Series for fixing on MCB DB’s, 6 kA, 50 Hz including Connecting up and Fixing-in-repairs, complete all as specified and as directed.

S&F MCB Single Pole & Neutral, 40 Amp, 240 Volt, AC, 'C' Series for fixing on MCB DB’s, 6 kA, 50 Hz including Connecting up and Fixing-in-repairs, complete all as specified and as directed.

S&F MCB DB 8-way, Single Pole & Neutral, Double Door type, Regal Grey Colour, Sheet Steel Phosphatised, Powder Coated with 63 Amp rate Bus-bar, Neutral Link Earth Bar & Din Rail duly embedded/ Concealed upto Wall surfaces including Connecting up with Existing Cable Incoming and Outgoing with Cable Lugs as per the Site requirement and and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to Match with the Existing Finishes and Fixing-in-repairs, complete all as specified and as directed.

S&F Sheet Metal Enclosure, Single Pole with a 2-Pin and Earth Plug and Socket with and including 1 No. MCB Single Pole, 32 Amp, 240 Volt and Connecting up including Fixing-in-repairs, complete all as specified and as directed.

Taking down/out unserviceable Wires only from the existing Sub-main Wiring of any type and any description, without disturbing Existing Conduit, complete all as specified and as directed.

Taking down existing/serviceable fan, sealing cable end, dismantling blades and removing fan and blades and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, oiling work, repair completely to serviceable and Hanging only ceiling fan on same position and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed. (Note: All unserviceable parts will be replaced and cost of the same shall be deemed to be inclusive in quoted rate).

S&F VTPN DB/Load Line DB 4-way including 160 Amp MCCB, 25K, complete Double door sheet metal enclosure, IP-43/54 protected, 8+12 modules, cement spill protector, IK-09, suitable for MCCB's upto 160 A as i/c Frame1 Enclosure, Any touch up of the wall surface due to changing of fitting shall be done by contractor with similar surfavce finish without extra cost to the department. All the cementing/Civil work will be in deemed to be in quoted rates complete all as per specified and directed. (NOTE: Outgoing MCBs shall be measured seperately)

Taking down DB/VTPN/Sheet Metal Enclosure including MCBs of any type and description and making good the disturbed surface complete all as specified and as directed.

RAGHAV ELECTRICALS

shiv shanker enterprises

M/s Satguru Traders

M/s Har Nandi Construction Company