Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.8 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹9.0 L+₹1.0 L (13.1%)Rejected-AOC HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | 2 | Rejected-AOC L2 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
26 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) LEH
GE (AF) LEH c/o 56 APO
CERTAIN REPAIR/ MAINTENANCE OF FIRE FIGHTING INSTALLATION AND CONNECTED WORKS AT AF STN LEH UNDER GE (AF) LEH
2022_MES_547368_3
GE(AF)/LEH/T-23/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
GE (AF) LEH
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE (AF) LEH
₹30,000
Yes
31 Mar 2023
30 Dec 2022
28 Jan 2023
30 Dec 2022
26 Jan 2023
7 Jan 2023
Amount
Servicing of diesel engine after dismantling and draining out the engine oil , taking down old fuel filter, oil filter and air filter, nozzles etc., cleaning the engine oil chamber, air cleaner, servicing to pumps and nozzels etc replacing the air filter, oil filter and fuel filter, nozzles and engine oil, complete all as specified and directed by Engineer-in-Charge
Servicing of diesel engine driven pump of capacity of 50HP after dismantling and cleaning including washing with replacement of bushes if required complete and refixing the same, complete all as specified and directed by Engineer-in-Charge
Repairing/servicing of Pressure Jet burner of Boiler after dismantling and taking out the unserviceable pressure jet burner replacing the unserviceable parts (photocells,fuel nozzels,ignition transformers) and refixing to its original place after testing to the entire satisfaction, complete all as specified and directed by Engineer-in-Charge
Servicing of Boiler unit complete consisting of closely wound helical concentric coils arranged to give adequate no of passes on flue gas side made out of ERW tubes suitable for high temperature dismantling the pressure jet burner, combustion air fan etc and connected accessories servicing refixing the same to its original places after, complete all as specified and directed by Engineer-in-Charge
Dismantling the Heat Exchanger from the Sump,taking out the unserviceable part & replacing the unserviceable parts including tubing works if required, make this functional, Descaleing the radiator and refixing to its original place and testing after commission to the entire, complete all as specified and directed by Engineer-in-Charge Note : a) The rate quoted includes connected welding works/ gas cutting works along with all hardware/ miscellaneous items. b) Gate Valve / MS Pipe Shall be paid and measured separetely in respective item
Supply and filling of Glycol in barrel of 210 Ltrs, complete all as specified and directed by Engineer-in-Charge
First aid hose reel drum complete swing type 30m conforming to IS- 444 (1980), in and including dismantling the existing unserviceable first aid hose reel drum , complete all as specified and directed by Engineer-in-Charge Make: Padmini / Winco/ CRC
Non brittle rubber ring/Gasket as per site requirement of fire hydrant coupling of dia 25mm , in and including dismantling the existing unserviceable Non brittle rubber ring, complete all as specified and directed by Engineer-in-Charge .
Shut off nozzle suitable for 20mm hose, in and including dismantling the existing unserviceable Shut off nozzle , complete all as specified and directed by Engineer-in-Charge .
Rubber hose reel of dia 20 mm in replacement of required length of hose reel for innetconnection in fire junction box with clamps, complete all as specified and directed by Engineer-in-Charge
Perpex sheet 3mm thick of various sizes of fire box cabinet as in replacement ,complete all as specified and directed by Engineer-in-Charge
Supply and filling of Foam Concentrate 1:18 (AFFF Foam) in barrel of 210 LTRS , complete all as specified and directed by Engineer-in-Charge
Supply and filling of coolant for Diesel Driven DG set of fire fighting installation at 114 HU, complete all as specified and directed by Engineer-in-Charge
Non Return butterfly valve 200 mm dia as in replacement , complete all as specified and directed by Engineer-in-Charge
Non Return butterfly valve 150 mm dia as in replacement , complete all as specified and directed by Engineer-in-Charge
Non Return butterfly valve 100 mm dia as in replacement , complete all as specified and directed by Engineer-in-Charge
Excavation in trenches not exc 1.5m wide and and not exc. 1.5m depth wide in any type of soil for laying electric cables/pipes etc including getting out excavated earth and trimming the sides and bottoms of trenches , complete all as specificed and directed by Engineer-in-Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested, complete all as specified and directed by Engineer-in-Charge.
Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point , complete all as specified and directed by Engineer-in-Charge.
MS/ERW pipe 100mm dia bore, medium grade laid in trenches or on ground/ vertically with necessary peopted cover as per IS and welded joints including removing the rusted, broken old MS/ERW pipe and painting with two coats of synthetic enamel paint over a coat of zinc chrome primer in and including taking out the existing unserviceable/corroded MS/ERW Pipe ,complete, all as specified and directed by Engineer-in-Charge
GI pipe medium grade with all necessary fittings fixed to wall/ ceiling/ floor complete of size 25 mm dia in and including taking down old unservicable pipe , complete all as specified and directed by Engineer-in-Charge.
Pressure guage suitable for 150mm ( 6" ) dia delivery pipe line 0-16 Kgs ratingin and including taking down old unservicable pressure gauge , complete all as specified and directed by Engineer-in-Charge.
Ball valve suitable for fire Hydrants system of size 25 mm dia as per site including fittings all in and including taking down of old unservicable Ball valve , complete all as specified and directed by Engineer-in-Charge
Fire response indicator having two nos of LED written FIRE as per exisiting system including wiring connection with 2core copper cable with existing panel, in and including taking down of old unservicable fire response indicator , complete all as specified and directed by Engineer-in-Charge
Addressable Optical smoke analogue light scattering type using a pulsed internal infrared LED and a silicon photo diode reciever including wiring connection with 2core copper cable with existing panel addresable panel in and including taking down the exisiting unserviceable smoke detectors , complete all as specified and directed by Engineer-in-Charge .
Optical ultra violet and infra-red type flame detectors suitable to give visual alarm on detection of fire including wiring connection with 2core copper cable with existing panel in and including taking down the exisiting unserviceable smoke detectors ,complete all as specified and directed by Engineer-in-Charge
Addressable Optical heat detector analogue suitable to work on rate of rise of ambient temp and fixed temp including wiring connection with 2core copper cable with existing panel addresable panel in and including taking down the exisiting unserviceable heat detectors , complete all as specified and directed by Engineer-in-Charge
Manual call point duly housing in CRCA Sheet normally closed by glass in and including taking down the exisiting unserviceable manual call point , complete all as specified and directed by Engineer-in-Charge
Rewinding of electric motor 15 HP 3 phase 415 V with suitable size super enameled copper wire and insulation as per existing gauge and rating in and including dismentaling of old unserviceable winding of motor, complete all as specified and directed by Engineer-in-Charge
New impellor of Pump Capacity 15 HP as per site requirement in and including replacement of old unserviceable/ Leaked impellor, complete all as specified and directed by Engineer-in-Charge
Alignment of impeller with 15 HP electric motor as per site requirement, complete all as specified and directed by Engineer-in-Charge
Alignment of impeller with 50 HP electric motor as per site requirement, complete all as specified and directed by Engineer-in-Charge
Preperation of old painted surfaces of following items/equipments and applying two coats of synthetic enamel paint as per specified colour coding on steel / iron surfaces for Fire Fighting installation in 114 HU, complete all as specified and directed by Engineer-in-Charge
Mild steel / GI pipe lines of any size
Diesel Engine and coupled pumpset
Centrifugal pumpsets of any cap
Fire reel hose cabinets
Diesel Storage tank of cap 500 ltrs
Insulation of M S Pipe of dia 40 mm with PUF slab 30 mm thick with and including applying bituminuous compound and Aluminium cladding with 26 gauge Aluminium sheet after tightening the slabs with GI wire as in replacement, complete all as specified and directed by Engineer-in-Charge
Insulation of M S Pipe of dia more than 100 mm with PUF slab 40 mm thick with and including applying bituminuous compound and Aluminium cladding with 26 gauge Aluminium sheet after tightening the slabs with GI wire as in replacement, complete all as specified and directed by Engineer-in-Charge
Insulation of M S Pipe of dia more than 150 mm with PUF slab 40 mm thick with and including applying bituminuous compound and Aluminium cladding with 26 gauge Aluminium sheet after tightening the slabs with GI wire as in replacement, complete all as specified and directed by Engineer-in-Charge
Repair to fire protection system consisting of main fire control panel of 08 zones complete digital type , complete all as specified and directed by Engineer-in-Charge Make: Agni / Daksha / SystemSensor or equivalent
Supply, erection, testing and commissioning of electronic type dual tone hooter after repair and replacement of UNSV parts with all accessories as per existing specifications and make in and including dismantling the existing one ,complete all as specified and directed by Engineer-in-Charge
Fluid Circulation motor of 1/2 HP including connection as per satisfaction in and including dismantling the existing one ,complete all as specified and directed by Engineer-in-Charge .
Sign board made of metal frame of size 1m x 0.6m and metal sheet of minimum thickness 3 mm duly painted and name of installation written on the sign board in and including of dismanteling of old unservicable sign board , complete all as specified and as ditected by Engineer-in -Charge. Note: (i) The stand made of angle iron for fixing of sign board and the PCC work for fixing the stand in the ground are deemed to be inclusive of the item.(ii) Cost of painting of sign board, angle iron as directed by Engr-in-charge is deemed to be inclusive in the item.
Notice board of size 1m x 0.6m x 0.2m made of soft board wood and 12 mm thick cotton cloth over the wood, duly fixed on the wall with necessary arrangement complete in and including of dismanteling of old unservicable notice board , complete all as specified and as ditected by Engineer-in -Charge.
Street Light fitting LED 50 W as in replacement made up of pressure die cast aluminium housing with toughened glass, high power LEDs and secondary lenses with IP 66 protection, system efficacy > 100 LPW with all assessories/ electric connections all as specified and directed by Engineer-in-Charge Make Havells/Crompton Greaves or equivalent in Wipro/ Philips.
Repair to wiring of Main Panel for Electric Supply to Pump and Motor and replacement of UNSV wiring, MCB/MCCB and other items in panel as per site requirement to make it proper Functional of Plant complete all as specified and directed by Engineer-in-Charge Note: MCB/MCCB/Contactor/Switch/Lamp will be measured and paid separetly under relevant item of Sch A item 43.01 to 43.10.
Supply only MCCB of Cap 3 Pole 250 Amps, 25 KA, complete all as specified and directed by Engineer-in-Charge Make: L&T/Havelles/Schenider/Indo Asian
Supply only of MCB TP of 63 Amps , complete all as specified and directed by Engineer-in-Charge Make: L&T/Havelles/Schenider/Indo Asian
Supply only Contactor MNX 45, complete all as specified and directed by Engineer-in-Charge Make: L&T/Havelles/Schenider/Indo Asian
Supply only Contactor MNX 25 with overload relay, complete all as specified and directed by Engineer-in-Charge Make: L&T/Havelles/Schenider/Indo Asian
Supply only Indication Lamp Red/Blue/Yellow, complete all as specified and directed by Engineer-in-Charge
Supply only Pump On/Off Switch (Green/Yellow/Red), complete all as specified and directed by Engineer-in-Charge
Supply only Voltmeter ranges 0-500 Volts as per site requirement and complete all as specified and directed by Engineer-in-Charge
Supply only ampere meterranges 0-200 Amp as per site requirement and complete all as specified and directed by Engineer-in-Charge
Supply only ampere meterranges 0-60 Amp as per site requirement and complete all as specified and directed by Engineer-in-Charge
Supply only Auto/ Manual Switch as per site requirement and complete all as specified and directed by Engineer-in-Charge
Battery of 100 AH for DG set as in replacement of old unserviceable battery, complete all as specified and directed by Engineer-in-Charge Make: Exide/Amaron or equivalent
Note : Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents
national engineering
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .