MAINTENANCE AND OPERATION OF LIFT THROUGH OEMS JOHNSON ACCREDITED AGENCIES AT CGRA 5 ACRES LAND BHUBANESWAR

Amount

Maintenance and Operation of lift No G7728 through AMC (Minimum Gold Level) under repair, replacement, Overhaulling, Maintenance of Lifts through OEMs (Johnson) / accredited Agencies installed at CGRA Bhubaneswar of capacity 13 passengers including necessary minor repair / replacement of defective parts work if required in any emergency and kept the the lift in working condition at round the clock complete all as specified and directed.

Maintenance and Operation of lift No G7729 through AMC (Minimum Gold Level) under repair, replacement, Overhaulling, Maintenance of Lift through OEMs (Johnson) / accredited Agencies installed at CGRA Bhubaneswar of capacity 13 passengers including necessary minor repair / replacement of defective parts work if required in any emergency and kept the the lift in working condition at round the clock complete all as specified and directed.

NOTES FOR ITEM NO 1.00 & 2.00 :- 1. Service the lifts at regular intervals and as frequently as the company deems necessary based on the age, nature and condition of the elevator and will take all responsible care and maintain the lift equipment in safe and proper working condition. 2. Carry out the services work whenever possible on day convenient to the customer other than sunday and holiday and during regular working hours. 3. Depute an entitled authorised service personnel to attend all call backs during normal working hours and also if any emergency even after working hours. 4. Replenish the gear and motor bearing with necessary Johnson/authorised lubricants whenever necessary including checking /cleaning of all moving parts and keep them both electrically and mechanically in perfect working condition .

NOTES FOR ITEM NO 1.00 & 2.00 (Contd):- 5. Checking of minimum/maximum oil levels of gear, motor and guide lubricant tank complete all as directed. 6. Lubrication of motor bearing , brake pivets , weel bearing , mechanical limit switches, gate rollers and tracks, safety gear mechanisum, lock and rollers, connecting wires , retiring ram etc complete all as directed. 7. The rate quoted is deemed to be inclusive to tools and safety equipment, CRC SPARY, minor consumables such as PVC insulation tape, screws, fuse wire, clips,freuuel,locks,First Aid Box required for running and maintenance of plants 8. Inspection of electrical system such as main switch, over load protection, control relays , connecting wires, single phase preventor, main and lighting fuses, contact allingments etc all as directed. 9. Checking and inspection of motor terminals, brake liners, coupling bushes, limit switches, ultimate limit switch magnetic switches , push button movements, brake shoes, noise level, working condition of LEDs, gate lock, spindle movement, condition of lock brake condition of rubber roller , mechanical lock plate , rope anchorages, tightness of rope clips, position of equaliser , trailing of cables, condition of cable , door allingment clearance between vain and rollers, all mechanism bolts , door bearings, floor anounciator working condition, door skate, conditon of door switches, safety edges etc complete all as directed. 10. Checking of all emergency devices such as ARD working condition, Battery condition, over load device working condition, over load anounciator and display condition, emergency light working condition, emergency siren alarm condition , charing unit condition etc.complete all as directed. 11. Checking of lift well lighting, machine room lighting, machine room ventilators , machine room door including cleaning of machine room, lift well, enclosure, landing gates, car gates, car inside, lift pit etc

NOTES FOR ITEM NO 1.00 & 2.00 (Contd):- 12.Checking the following devices :- (a) Breake releasing mechanisum working condition (b) Break lock nut measurement in mm (c) Break arm switch (d) Emergency battery condition (e) Trap door access condition. (f) Breake plunger lock nut tightness (g) Additional car gate lock contact (h) Controller light working condition (j) Press and speek working condition (k) Shaft controller wiring tightness (l) Oil buffer working condition and oil level (m) Any abnormal noise observed. (n) Carryout the load testing ones in a year (o) Regularly Cheaking of ARD System (p) Consequence checking of fault electrical System. (q) Consequence checking of Earthing System.

Material and labour for repair work to maintain the clearance between CWT Frame and buffer for Lift No.L-G7728 or L-G7728 complete all as specified and directed.

Supply only following Spare parts for Lift No L-G7728/ L-G7729:-

Encoder extn cable ERN 1387, encoder end Male D & VVVF end Male D to suit nice 3000+ drive

Orange square dot matrix display with gong driver SG1005

SMPS 12V DC,50W,4A

10A 110 V DC contactor Siemens

10A 110 V DC contactor Siemens

Announciator (Floor and special messages) for SS/GR Processor NH Ver 2.0

Battery Amaron 12V-18 AH

Battery Amaron 12V-2.5 AH

ARD Announciator 12-48V DC Hindi+English H1701E

OSF tension weight assembly for PRO safety 85-30-00-02-1-00

Car guide shoe assembly 10 mm top for B/W vertical IS 290MM

Car guide shoe assembly bottom BW vertical IS 290MM

Serial communication GR series hardware card (SG 306)

CWT guide shoe assembly top for TK5A guide rail swivel type

CWT guide shoe assembly bottom for TK5A guide rail swivel type

DC Motor 95 RPM/47 Watt 25-08-CO-02-01-BD

Shree Mahavir Associates (BID ID -3154642)