Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹47.0 LAccepted-AOC GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 1 | Accepted-AOC L-1 | |
| 2 | 2₹47.7 L+₹33,622.50 (0.71%)Rejected-Finance | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹47.8 L+₹34,160 (0.72%)Rejected-Finance MD 1 236 SECTOR D1 LDA COLONY KANPUR ROAD LUCKNOW U P PIN 226012 | LUCKNOW | UTTAR PRADESH | 226012 | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹61.1 L+₹13.6 L (28.8%)Rejected-Finance T 3 HILL CREST APARTMENT BEHIND AMBABAI TEMPLE VASCO DA GAMA GOA 403 802 | VASCO DA GAMA | SOUTH GOA | GOA | 403802 | 4 | Rejected-Finance Being other than L-1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
8 Nov 2021, 6:00 pmClosed
GE EAST LUCKNOW
GE EAST LUCKNOW
PROVN OF SHED IN TRAINING AREA AND SPL REPAIR / CONVERSION OF FLUORESCENT LIGHT FITTINGS WITH ENERGY EFFICIENT LED LIGHTS AT BS MARG (JCO/OR MD ACCN) UNDER GE (EAST) LUCKNOW
2021_MES_481319_1
GE/E/LKO/T-53 OF 2021-22
Open Tender
Civil Works
Item Rate
120 days
Lucknow Cantt
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE EAST LUCKNOW
₹98,000
Yes
24 Nov 2021
12 Oct 2021
9 Nov 2021
12 Oct 2021
8 Nov 2021
26 Oct 2021
Amount
S&F in replacement of lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.
S&F in replacement of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9/10 Watts LED lamp B22 CDL etc and all accessories pre-wired including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. Make :Philips, Cat No : 30575 (Comet) or Havells, Cat No : LHDL06160099 (CITY 3) or equivalent in Crompton/Bajaj as approved by GE.
S&F in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. Make : Crompton, Cat No : LBHE-10-CDL or Havells, Cat No : RUGBYNEONFT10WLED760SSYMBOPC or PHILIPS Cat no WT202WLED6SCWPSUS2PC as approved by GE.
S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. Make : Crompton Cat No : IGP131LT8-16& LT8-20-865-2 or Havells Cat No: REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC or Philips cat no TMC 501P1XT-LED22W P 3241 as approved by GE.
S&F in replacement of single side connection LED T8 tube light rod 8 Watt, 6500K of two feet long into and including LED tube light fixture of two feet long with T8 push fit type holders, connector block, end caps, etc including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. Make : Crompton Cat No : DMLN1LT8-8& LT8-8-865-2 or equivalent in havells / philips / Bajaj as approved by GE.
S&F LED wall/surface mounted down lighter, 12 W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. Make:- Crompton Model-LCDSPLN-R12-CDL or equivalent in Havells / Philips / Bajaj as approved by GE.
S&F LED bulb 9 Watt B 22 CDL complete all as specified and directed. Make:- Havells/Bajaj/Philips/Crompton as approved by GE.
Supply and fixing in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Crompton, Cat No : LSTP-45-CDL or equivalent in Havells/ Philips / Bajaj as approved by GE.
Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
Excavating in trenches, not exc 1.5m wide and not exc 1.5m depth for foundation etc or shaft ,wells,cessipts , manholes, pier holes etc in any type of soil complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.
M&L for brick work with fly ash bricks using old size bricks on plan not exceeding 6.0 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick in CM ( 1:4 )on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.
M&L for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver blocks Glossy finish of any shape & size conferming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment of the design & pattern as approved by GE complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in PCC coping etc including necessory formwork complete all as specified and directed.
S&F mild steel work as in tubular trusses included special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St-240 complete all as specified and directed.
M&L for MS plates (plain or chequered) channel, square cut or notched (ordinary and counter shunk) forming holes, without any attachment complete all as specified and directed.
S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
M&L for two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer of steel surfaces of any description over 10cm in width or girth not otherwise described complete all as specified and directed.
M&L for preparation of newely plaster surface of wall and applying two coats of cement base paint including one coat of primer complete all as specified and as directed.
Removal of excavated soil to a distance exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.
M/S VIKASH TRADERS
R K CONTRACTOR AND SUPPLIERS
U K Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .