Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC 6 NALAPUKUR LANE FLAT 2C SENHATI COLONY KOLKATA 700034 WEST BENGAL | KOLKATA | WEST BENGAL | 700034 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹41.3 L+₹1.6 L (4.00%)Rejected-Finance PO CHANDL PS BISHNUPUR DIST SOUTH 24 PGS PIN 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹42.1 L+₹2.4 L (6.07%)Rejected-Finance 52A 1A NAZIR LANE KIDDERPORE KOLKATA 700023 | KOLKATA | KOLKATA | WEST BENGAL | 700023 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹42.8 L+₹3.1 L (7.76%)Rejected-Finance 8 28 BIJOYGARH P O JADAVPUR KOLKATA 700 032 | KOLKATA | WEST BENGAL | 700032 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹43.4 L+₹3.7 L (9.33%)Rejected-Finance BHANGARMATH THAKURANI CHAWK PO SAMABYPALLY BALLY HOWRAH 711 205 WEST BENGAL | HOWRAH | WEST BENGAL | 711205 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹36.4 L
EMD Value
₹72,800
Closing Date
27 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
SPL REPAIR TO BLDG NO O-4 INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2023_MES_616112_1
8170/E8
Open Tender
Civil Works
Item Rate
120 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹72,800
20 Nov 2023
28 Aug 2023
28 Sept 2023
28 Aug 2023
27 Sept 2023
13 Sept 2023
Amount
Demolition Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed by Engr-in-Charge.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 in two layers (10+5mm) on fair faces of brick work or concrete surface of walls with top layer mixed with water proofing compound and finished even and smooth and without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately.
Supply only Integral Water Proofing Compound complete all as specified and directed
M & L for Providing, cement concrete, Type B1, 1:2:4 ( 20mm aggregate) in roof kerbs or mud stops, padding, rounded or chamfered on edges on existing roof( with proper slope) including preparing of roof slab complete all as directed by Engineer - in - charge .
M&L for providing Cement concrete 1:4:8 type D2 using 40mm graded Aggregate for foundation and mass concrete as directed.
M & L for brick work using old size sub class 'B' bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed by Engr-in-Charge.
M & L brick work using old size sub class 'B' bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 all as specified and directed by Engr-in-Charge.
M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge.
S&F 20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 20mm screed bed in CM(1:6) completed all as directed.
S&F 20 mm thick granite slab as in vertical surfaces cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 10mm rendering in CM(1:3) completed all as directed.
M&L 75 mm thick PCC 1:2:4 type B2 (using 20mm graded crushed stone aggregate) as in plinth protection/Paving etc, finished even and smooth without using extra cement as directed by the Engr-in-Charge.
M&L for RCC (nominal mix) (1:1½:3), type A-1 (using 20mm graded stone aggregate) as in slabs, supported on walls, beams and columns, in floors, roof landings, balconies, canopies, deck slabs and shelves etc., complete all as specified and as directed.
Use and waste of curved Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, columns, beams, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work complete all as specified
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .(Upto 4th story bldg)
M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for providing Cement concrete 1:2:4 type B1 using 12.5 mm graded Aggregate in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed.
S&F 12 mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and including all necessary fixing accessories required as approved as per manufacturers instruction complete all as specified and as directed.
M&L for Vitrified Ceramic tiles 10mm thick (any shade as approved by GE) (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed complete all as specified and directed
M&L for Vitrified Ceramic tiles 10mm thick (any shade as approved by GE ) (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surfaces, skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match incl backing coat layer of mortar 10mm thick in CM 1:4, complete all as specified and directed complete all as specified and directed
M&L for homogeneously fully Vitrified ceramic digital tiles 10 mm thick ( any shade as approved by GE) (Square/ rectangular or in any shape) polished, area of each tile exc 1.00 Sqm but n exc 2.00 Sqm, as in wall claddings, skirtings etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 10 mm thick screed bed cement mortar 1:3 including dismantling old flooring of any description as required complete all as specified and directed. all as specified and directed .
M&L for 18-20 mm thick Makarana white marble (of approved shade) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and making moulds on edges, laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.
All as per item N0. 23.00 above, but as in vertical surfaces such as skirting, dado, wall cladding etc, fixed over and including 10 mm thick backing layer in cement mortar (1:3), set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Marble, including rubbing and polishing complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blades/scrapper as applicable to make the surface free from protrutions, loose particles, dust etc., and applying 3 mm thick wall care putty finishing surfaces even and smooth and applying two coats of oil emulsion distemper finished with rollers over a coat of alkali resistant primer as per manufacturer's instructions complete all as specified and directed. Complete all as specified and directed.
All as per item No.23.00 above, but on Ceilings
M&L for complete removal of existing treatment on walls including cleaning, watering to make the surface clean and free from dust and applying 3 mm thick wall care putty finishing surfaces even and smooth and applying two coats of oil emulsion distemper, finished with rollers over a coat of alkali resistant primer complete all as specified and directed.
M&L for complete removal of existing treatment of old wall or ceiling surfaces and applying two coats of damp proof painting as per manufacturers instructions to arrest dampness complete all as directed by Engr-in-charge.
M&L for preparation of old decorated surfaces of walls by cleaning brooming, rubbing and scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots etc., as required using broom, emery paper, putty blades/scrapper as applicable to make the surface free from protrutions, loose particles, dust etc., and applying two coats of oil emulsion distemper finished with rollers as per manufacturer's instructions complete all as specified and directed. Complete all as specified and directed.
All as per item No.29.00 above, but on Ceilings
M&L for preparation of old painted steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint (First quality) complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint over a coat of pink primer on old wood or wood based surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint on old painted brick, stone, concrete, asbestos cement or plastered surfaces exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajjas, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crack fill paste and applying one coat of weather proof exterior emulsion paint by roller of approved make and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajjas, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crack fill paste and applying Two coats of weather proof exterior emulsion paint by roller of approved make and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for preparation of old painted brick, concrete, stone, asbestos cement or plastered surfaces of any description over 10 cm width or girth and applying one coat of acrylic emulsion/plastic emulsion paint finished with rollers with roller/brush complete all as specified and directed by Engineer-in-Charge.
M&L for applying one coat of French polishing on old treated wooden surfaces of any description over 10 cm width or girth including cleaning and preparation of surfaces including a coat of wood filler in one or more coats, complete all as specified and directed.
M&L Cleaning of floor with water & polishing with mansion polish complete all as specified and directed by Engr-in-Charge.
S&F 2nd class hard wood timber wrought and fixed as in framed scantling over 40 Sqcm in section, all as directed by Engr-in-Charge.
S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought, cross sectional area exc 6 Sq cm but n exc 13 Sq cm, secured with nails including two coats of synthetic enamel paint over a coat of pink primer complete all as directed by Engr-in-Charge.
S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought , cross sectional area exc 3 Sq cm but n exc 6 Sq cm, secured with nails including two coats of synthetic enamel paint over a coat of pink primer complete all as directed by Engr-in-Charge.
M&L 10 mm thick decorative artificial wood laminated flooring including connected skirtings over Ist class hard wood scantling having 75mmX 75 mm cross section @ 50 Cm centre to centre both ways, polished and finished in all respect with necessary decorative beadings etc complete including dismantling the existing flooring of and description complete all as specified and as directed. Note:- Wooden scantling, lining and beading measured and pair separately under respective items.
S&F Solid PVC Wall / Ceiling Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete as directed by Engr-in-Charge
S&F Ornamental 3D Brass tiger head of size 300mm x 300mm Casted out of mould specifically fabricated (as per drawing) as per approved sample as approved by GE, complete all as directed by Engineer-in-Charge. Note: Cost of sample will be paid separately
Supply only 3D model followed by actual size clay and fiber glass sample of 3D tiger head (as per drawing) as per approved sample as approved by GE, complete all as directed by Engineer-in-Charge.
S&F floor mounted customised multilayer fountain of 2.30m high, curved out of marble by specialised high skilled sculptor art workmanship, with water dispensing and rotating water circulation arrangement including suitable marble base and connected work as approved. including silicon sealant water sealing as required, complete all as specified and directed. Note : (i) 3D model colour pictures can be refer with GE (FW) during working hours before quoting of tender. (ii) Except the sculpture portion, water circulation arrangement and leak proof silicon sealant item, all other normal marble work, PCC / RCC, formwork and plastering work will be measured and paid separately under respective items and any other specific requirement shall be deemed to be included in the quoted rate.
S&F 5.5 mm thick WPC white board false ceiling including 0.55mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspended form the soffit of roof slab/truss @ 1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fastener with and including necessary nuts and bolts and gypsum board is screwed to ceiling section with stainless steel screws @ 230mm c/c complete all as specified and directed.
S&F 12mm thick Seamless waterproof and termite proof WPC Lovers wall panel fixed with probond adhesive and screwed to the wall
S&F in repair 19mm thick commercial faced plywood grade BWR type B-B fixed with screws to timber frame work as in pelmet boxes, cup board etc complete all as specified and directed.
M&L in repairs 0.9mm thick decorative laminate type-1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed.
S&F for aluminium composite panel in metallic colour of approved shade made out of 3mm thick aluminium composite panel material comprising of 2.5mm thick FR grade mineral core sandwitched between two almn sheets (each 0.25mm thick) using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, bracket rods incl framework of mild steel angle iron of size 45x45x5mm placed vertically @0.75m c/c and horizontally @ 0.25m c/c etc complete all as specified all as specified
S&F in repair aluminium 'E' channel for sliding drawer shutter of cup board in two way, 300 mm long complete all as specified and directed.
S&F double action spring hinges, brass with phosphor bronze wire spring, bright polished of size 100 mm complete all as specified and directed.
S&F Brass handles, cast type, polished bright, 100 mm complete all as specified and directed.
SCHEDULE 'A' PART-II (INTERNAL ELECTRIFICATION) Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and incl PVC conduit complete with all fittings and accessories (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured separately. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)
All as per item No 56 here-in-before, but for one 5 pin 5/6 amp socket out let point in the same switch board of light points (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
All as per item No 56 here-in-before, but for one 5 pin 5/6 amps multisocket outlet point in independent board (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
All as per item No 56 above, but using 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuity wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
S & F Modular Switch 1 way, 6 Amps, 1 module complete all as specified and directed.
S & F Modular Switch 1 way, 16 Amps, 1 module complete all as specified and directed.
S & F Modular Socket 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
S & F Modular Socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
S & F Modular Fan step regulator, 120 watt, 2 module complete all as specified and directed.
S & F Modular Bell push 6 Amps, 1 module complete all as specified and directed.
S & F Modular Blank plate, 1 module complete all as specified and directed.
S & F Modular type Metal Flush box 3 module complete all as specified and directed.
S & F Modular type Metal Flush box 4 module complete all as specified and directed.
S & F Modular type Metal Flush box 6 module complete all as specified and directed.
S & F Modular type Metal Flush box 8 module complete all as specified and directed.
S & F Modular type Metal Flush box 12 module complete all as specified and directed.
S&F Modular White cover plate with frame 3 module complete all as specified and directed.
S&F Modular White cover plate with frame 4 module complete all as specified and directed.
S&F Modular White cover plate with frame 6 module complete all as specified and directed.
S&F Modular White cover plate with frame 8 module complete all as specified and directed.
S&F Modular White cover plate with frame 12 module complete all as specified and directed.
Supply & fixing of Ceiling rose, 3 phase / PVC polycarbonate, isolated body, complete all as specified and directed
S&F PVC/Polycarbonate body lamp holder with back plate suitable for batten/pendant fittings or to be mounted on walls
S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, operating voltage 180-270 V, with acrylic/polycarbonate diffuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation
S&F recess mounted LED luminaire, of size 600 mm x 600 mm, in powder coated CRCA housing , having glare free diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 35/36 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed and complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation (f) Weather protection: IP20
S&F LED Bulkhead fitting 9/10 watt, mounted on wall /ceiling connected with insulated unsheathed flexible copper wire of suitable size (length not exceeding 0.5 m) from ceiling rose complete all as specified and directed.
S&F LED flexi strip of required, IP 20 ingress protection with wide viewing angle of 120° with 24/25W LED 6000K including separate driver and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Philips/Havells/Bajaj
S&F LED Track and Spot light 20 Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders and LED lamp suitable for roof ceiling and connected with insulated unsheathed flexible copper wire of suitable size complete all as specified and directed. (Make : Philips, Cat No. ST700TLED20 930PC PSUMB1CWH IN or equivalent model in other makes specified in tender)
S&F adjustable bed side LED lamp with clear lens with colour tempter 3000 K suitable for 3W metal and synthetic material lumen 150lm and connected with insulated unsheathed flexible copper wire of suitable size complete all as specified and directed. (Make : Philips, Cat No. 48042/30/31 or equivalent model in other makes specified in tender)
Taking down of Old MCB DB any type any size including MCCB/RCCB/MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site or removal from site complete all as specified and directed.
Supply and fixing of MCB TPN DB 4 way vertical type double door, IP-43 protection, isolated natural bar, insulated busbar assembly, mechanical impact strength of IK08, suitable for MCCB's upto 250 Amps as incomer complete all as specified and directed. complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S/ PANASONIC / HAGER)
S&F MCB TPN DB 4 way double door, IP-43 protection, isolated natural bar, insulated busbar assembly, mechanical impact strength of IK08, complete all as specified and directed. complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S/ PANASONIC / HAGER)
S&F MCB SPN DB 8 way double door, IP-43 protection, isolated natural bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed. complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S/ PANASONIC / HAGER)
S&F MCB SPN DB 4 way double door, IP-43 protection, isolated natural bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed. complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S/ PANASONIC / HAGER)
S&F MCB TPN 63 Amps, 415 volts, 'C' series, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S / PANASONIC / HAGER)
S&F MCB SPN 40 Amps 'B' series 10 KA 240 volt 240 volts complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S/ PANASONIC / HAGER)
S&F MCB SP 6-32 Amps 'B' series 10 KA 240 volt 240 volts complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S/ PANASONIC / HAGER)
Taking down of old Submain wiring any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.
M&L for sub main wiring with 4 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 Sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 Sqmm as earth continuity conductor drawn through and including concealed PVC conduit of suitable size, surface type complete all as specified and directed. (NOTE : Five runs of single core 10.0 Sqmm cable & one run of PVC conduit shall be measured as one unit)
All as per Srl. Item No. 94.00 above, but with two runs of 6.0 Sqmm cable and one run of 6.0 Sqmm as earth continuity conductor in concealed PVC conduit (NOTE : Three runs of single core 4.0 Sqmm cable & one run of concealed PVC conduit shall be measured as one unit)
All as per Srl. Item No. 94.00 above, but with two runs of 4.0 Sqmm cable and one run of 4.0 Sqmm as earth continuity conductor in concealed PVC conduit (NOTE : Three runs of single core 4.0 Sqmm cable & one run of concealed PVC conduit shall be measured as one unit)
Supply, installation, testing and commissioning of heater water storage type steel body with copper inner tank and heating element upto 1.5 KW capacity (vertical cylindrical type) 15 ltrs capacity with BEE 5 star rating (min), incl fixing arrangement with providing incl suitable capacity flexible cable 3 core with 3 pin plug of 16 amp and 02 Nos chromium plated brass connector pipe 15mm dia, 600 m long with brass coupling and union at both ends complete all as specified and directed. (Make: AO Smith SDS/ Havells / BAJAJ)
Supply, installation, testing and commissioning of heater water storage type steel body with copper inner tank and heating element upto 1.5 KW capacity (vertical cylindrical type) 10 ltrs capacity with BEE 5 star rating (min), incl fixing arrangement with providing incl suitable capacity flexible cable 3 core with 3 pin plug of 16 amp and 02 Nos chromium plated brass connector pipe 15mm dia, 600 m long with brass coupling and union at both ends complete all as specified and directed. (Make: AO Smith SDS/ Havells / BAJAJ)
Supply and Hanging, ceiling fan, with brushless DC motor, 1200 mm sweep, BLDC 5 Star rated with five years warranty (with / without remote), down rod, canopy, fan blades and accessories and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.0 Sqmm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan including dismantling existing fan complete all as specified and directed. (MAKE : HALONIX, Model: PLASMA BLDC/ CROMPTON, Model : EENERGION GOOVE /BAJAJ, Model: SKU-251100-Emergps 28W 1200mm CF / ORIENT, Model: HECTOR 500 / HAVELLS, Model: Efficiencia Neo/ USHA, Model No.ENERGIA) NOTES: (i) Old fan, if any taken down, shall be deposited by contractor in MES store yard. (ii) The vender shall be provided with marking / embossing toll free No duly indicating the guarantee/warrantee period on the every fan. (iii) The tenderer shall be marked/inscribed the MES / SM No on fan with synthetic enamel paint (Black colour)
S&F Wall mounted fan 450 mm sweep, 1400 RPM, heavy duty, AC Single Phase 230/240 volts, metal body, louvers complete with all accessories and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.0 Sqmm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan, complete all as specified and directed. (MAKE : HAVELLS, Model: V3 / CROMPTON, Model: ACVORTEX18WM/ USHA, Model: 450mm Dominaire wall fan/ Bajaj, Model: SKU250439 or equivalent model in ORIENT) NOTES: (i) Old fan, if any taken down, shall be deposited by contractor in MES store yard. (ii) The vender shall be provided with marking / embossing toll free No duly indicating the guarantee/warrantee period on the every fan. (iii) The tenderer shall be marked/inscribed the MES / SM No on fan with synthetic enamel paint (Black colour)
UNITED ENGINEERS
M/S S. K. SARKAR
DEB AND COMPANY
dutta and dutta
GHOSH ENTERPRISE
M A ENTERPRISES
UNIVERSAL TRADING CENTRE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .